/**
  ******************************************************************************
  * @file    stm32h7rsxx_hal_flash_ex.c
  * @author  MCD Application Team
  * @brief   Extended FLASH HAL module driver.
  *          This file provides firmware functions to manage the following
  *          functionalities of the FLASH extended peripheral:
  *           + Extended programming operations functions
  *
 @verbatim
 ==============================================================================
                   ##### Flash Extended features #####
 ==============================================================================

  [..] Comparing to other previous devices, the FLASH interface for STM32H7RSxx
       devices contains the following additional features

       (+) Non-volatile state, Root-Of-Trust and Epoch option bytes
       (+) Option byte keys associated with hide protection level
       (+) CRC hardware module to check integrity
       (+) OTP blocks lock mechanism

                        ##### How to use this driver #####
 ==============================================================================
  [..] This driver provides functions to configure and program the FLASH memory
       of all STM32H7RSxx devices. It includes:
      (#) Flash Memory Erase functions:
        (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
             HAL_FLASH_Lock() functions
        (++) Erase function: Sector Erase and Mass Erase
        (++) There are two modes of erase :
          (+++) Polling Mode using HAL_FLASHEx_Erase()
          (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT()

      (#) Option Bytes Programming function: Use HAL_FLASHEx_OBProgram() to:
        (++) Configure the write protection for each sector
        (++) Program the user Option Bytes
        (++) Configure the hide protection area
        (++) Configure the non-volatile state

      (#) Get Option Bytes Configuration function: Use HAL_FLASHEx_OBGetConfig() to:
        (++) Get the value of the sectors write protection
        (++) Get the value of the user Option Bytes
        (++) Get the configuration of the hide protection area
        (++) Get the value of the non-volatile state
        (++) Get the value of the Root-Of-Trust configuration
        (++) Get the value of the Epoch

      (#) OTP lock configuration function: Use HAL_FLASHEx_OTPLockConfig()
        (++) Activate the lock of an OTP block

      (#) Get the OTP lock configuration function: Use HAL_FLASHEx_GetOTPLock()
        (++) Get the value of the OTP blocks lock configuration

      (#) Option Byte Keys configuration function: Use HAL_FLASHEx_KeyConfig()
        (++) Program an option key for a specified hide protection level

      (#) Get an option byte key value: Use HAL_FLASHEx_GetKey()
        (++) Get the value of an option byte key for a specified hide protection level

      (#) Perform a CRC computation function: Use HAL_FLASHEx_ComputeCRC()
        (++) Perform CRC computation on a area defined either by sectors or by start/end
		     addresses and return computation result

      (#) ECC management functions:
        (++) Handle ECC Detection flash interrupt by calling HAL_FLASHEx_ECCD_IRQHandler()
        (++) Callback functions are called when the ECC detection or correction occurs :
             HAL_FLASHEx_EccDetectionCallback() for ECC detection, otherwise
             HAL_FLASHEx_EccCorrectionCallback()
        (++) Get information about ECC error by calling HAL_FLASHEx_GetEccInfo()
        (++) Enable/Disable the ECC correction and detection interrupts:
          (+++) HAL_FLASHEx_EnableEccCorrectionInterrupt() to enable ECC correction interrupt
          (+++) HAL_FLASHEx_DisableEccCorrectionInterrupt() to disable ECC correction interrupt
          (+++) HAL_FLASHEx_EnableEccDetectionInterrupt() to enable ECC detection interrupt
          (+++) HAL_FLASHEx_DisableEccDetectionInterrupt() to disable ECC detection interrupt

 @endverbatim
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2022 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm32h7rsxx_hal.h"

/** @addtogroup STM32H7RSxx_HAL_Driver
  * @{
  */

/** @defgroup FLASHEx FLASHEx
  * @brief FLASH Extended HAL module driver
  * @{
  */

#ifdef HAL_FLASH_MODULE_ENABLED

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define SYSTEM_FLASH_SIZE  0x00020000UL  /*!< System Flash size : 128 KB */
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @defgroup FLASHEx_Private_Functions FLASHEx Private Functions
  * @{
  */
static void              FLASH_MassErase(void);

static void              FLASH_OB_WRPConfig(uint32_t WRPState, uint32_t WRPSector);
static void              FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig1, uint32_t UserConfig2);
static void              FLASH_OB_HDPConfig(uint32_t HDPStartPage, uint32_t HDPEndPage);
static void              FLASH_OB_NVConfig(uint32_t NVState);

static void              FLASH_OB_GetWRP(uint32_t *WRPState, uint32_t *WRPSector);
static void              FLASH_OB_GetUser(uint32_t *UserConfig1, uint32_t *UserConfig2);
static void              FLASH_OB_GetHDP(uint32_t *HDPStartPage, uint32_t *HDPEndPage);
static uint32_t          FLASH_OB_GetNV(void);
static uint32_t          FLASH_OB_GetRoT(void);
static uint32_t          FLASH_OB_GetEpoch(void);

static void              FLASH_CRC_AddSector(uint32_t Sector);
static void              FLASH_CRC_SelectAddress(uint32_t CRCStartAddr, uint32_t CRCEndAddr);
static HAL_StatusTypeDef FLASH_CRC_WaitForLastOperation(uint32_t Timeout);
/**
  * @}
  */

/* Exported functions -------------------------------------------------------*/
/** @defgroup FLASHEx_Exported_Functions FLASH Extended Exported Functions
  * @{
  */

/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions
  *  @brief   Extended IO operation functions
  *
@verbatim
 ===============================================================================
                ##### Extended programming operation functions #####
 ===============================================================================
    [..]
    This subsection provides a set of functions allowing to manage the Extended FLASH
    programming operations Operations.

@endverbatim
  * @{
  */
/**
  * @brief  Perform a mass erase or erase the specified FLASH memory sectors.
  * @param[in]  pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
  *         contains the configuration information for the erasing.
  *
  * @param[out]  SectorError pointer to variable that contains the configuration
  *         information on faulty sector in case of error (0xFFFFFFFF means that all
  *         the sectors have been correctly erased).
  *
  * @retval HAL Status
  */
HAL_StatusTypeDef HAL_FLASHEx_Erase(const FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError)
{
  HAL_StatusTypeDef status;
  uint32_t sector_index;

  /* Check the parameters */
  assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));

  /* Process Locked */
  __HAL_LOCK(&pFlash);

  /* Reset error code */
  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);

  if (status == HAL_OK)
  {
    if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
    {
      /* Mass erase to be done */
      FLASH_MassErase();

      /* Wait for last operation to be completed */
      status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);
    }
    else
    {
      /*Initialization of SectorError variable*/
      *SectorError = 0xFFFFFFFFU;

      for (sector_index = pEraseInit->Sector; sector_index < (pEraseInit->Sector + pEraseInit->NbSectors);
           sector_index++)
      {
        FLASH_SectorErase(sector_index);

        /* Wait for last operation to be completed */
        status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);

        if (status != HAL_OK)
        {
          /* In case of error, stop erase procedure and return the faulty sector */
          *SectorError = sector_index;
          break;
        }
      }
    }

    /* If the erase operation is completed, disable the associated bits */
    CLEAR_BIT(FLASH->CR, (pEraseInit->TypeErase | FLASH_CR_SSN));
  }

  /* Process Unlocked */
  __HAL_UNLOCK(&pFlash);

  return status;
}

/**
  * @brief  Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled.
  * @param  pEraseInit pointer to an FLASH_EraseInitTypeDef structure that
  *         contains the configuration information for the erasing.
  *
  * @retval HAL Status
  */
HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(const FLASH_EraseInitTypeDef *pEraseInit)
{
  HAL_StatusTypeDef status;

  /* Check the parameters */
  assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));

  /* Process Locked */
  __HAL_LOCK(&pFlash);

  /* Reset error code */
  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);

  if (status != HAL_OK)
  {
    /* Process Unlocked */
    __HAL_UNLOCK(&pFlash);
  }
  else
  {
    /* Set internal variables used by the IRQ handler */
    pFlash.ProcedureOnGoing = pEraseInit->TypeErase;

    /* Enable End of Operation and Error interrupts */
    SET_BIT(FLASH->IER, (FLASH_IT_EOP | FLASH_IT_WRPERR | FLASH_IT_PGSERR | FLASH_IT_STRBERR | FLASH_IT_INCERR));

    if (pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
    {
      /* Mass erase to be done */
      FLASH_MassErase();
    }
    else
    {
      /* Erase by sector to be done */
      pFlash.NbSectorsToErase = pEraseInit->NbSectors;
      pFlash.Sector = pEraseInit->Sector;

      /* Erase first sector and wait for IT */
      FLASH_SectorErase(pEraseInit->Sector);
    }
  }

  return status;
}

/**
  * @brief  Program Option bytes.
  * @param  pOBInit pointer to an FLASH_OBInitStruct structure that
  *         contains the configuration information for the programming.
  *
  * @note   To configure any option bytes, the option lock bit OPTLOCK must be
  *         cleared with the call of HAL_FLASH_OB_Unlock() function.
  * @note   New option bytes configuration will be taken into account in two cases:
  *         - after an option bytes launch through the call of HAL_FLASH_OB_Launch()
  *         - after a power reset (BOR reset or exit from Standby/Shutdown modes)
  *
  * @retval HAL Status
  */
HAL_StatusTypeDef HAL_FLASHEx_OBProgram(const FLASH_OBProgramInitTypeDef *pOBInit)
{
  HAL_StatusTypeDef status;

  /* Check the parameters */
  assert_param(IS_OPTIONBYTE(pOBInit->OptionType));

  /* Process Locked */
  __HAL_LOCK(&pFlash);

  /* Reset error code */
  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);

  if ((status == HAL_OK) && (pOBInit->OptionType != 0U))
  {
    /* Set PG_OPT Bit */
    SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT);

    /* Write protection configuration */
    if ((pOBInit->OptionType & OPTIONBYTE_WRP) != 0U)
    {
      /* Configure of Write protection on the selected area */
      FLASH_OB_WRPConfig(pOBInit->WRPState, pOBInit->WRPSector);
    }

    /* User Configuration */
    if ((pOBInit->OptionType & OPTIONBYTE_USER) != 0U)
    {
      /* Configure the user option bytes */
      FLASH_OB_UserConfig(pOBInit->USERType, pOBInit->USERConfig1, pOBInit->USERConfig2);
    }

    /* HDP configuration */
    if ((pOBInit->OptionType & OPTIONBYTE_HDP) != 0U)
    {
      /* Configure the HDP Protection */
      FLASH_OB_HDPConfig(pOBInit->HDPStartPage, pOBInit->HDPEndPage);
    }

    /* Non-volatile state configuration */
    if ((pOBInit->OptionType & OPTIONBYTE_NV) != 0U)
    {
      /* Configure the non-volatile state */
      FLASH_OB_NVConfig(pOBInit->NVState);
    }

    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);

    /* Clear PG_OPT Bit */
    CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT);
  }

  /* Process Unlocked */
  __HAL_UNLOCK(&pFlash);

  return status;
}

/**
  * @brief  Get the Option bytes configuration.
  * @param  pOBInit pointer to an FLASH_OBInitStruct structure that contains the
  *                  configuration information.
  * @note   The fields pOBInit->WRPArea, pOBInit->WMSecConfig and pOBInit->BootAddrConfig
  *         should indicate which area/address is requested for the WRP, WM Security or
  *         Boot Address, else no information will be returned
  *
  * @retval None
  */
void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
{
  /* Get write protection on the selected area */
  FLASH_OB_GetWRP(&(pOBInit->WRPState), &(pOBInit->WRPSector));

  /* Get the user option bytes */
  FLASH_OB_GetUser(&(pOBInit->USERConfig1), &(pOBInit->USERConfig2));

  /* Get the HDP Protection */
  FLASH_OB_GetHDP(&(pOBInit->HDPStartPage), &(pOBInit->HDPEndPage));

  /* Get the non-volatile state */
  pOBInit->NVState = FLASH_OB_GetNV();

  /* Get the Root-Of-Trust configuration */
  pOBInit->ROTConfig = FLASH_OB_GetRoT();

  /* Get the epoch */
  pOBInit->EPOCH = FLASH_OB_GetEpoch();
}

/**
  * @}
  */

/** @defgroup FLASHEx_Exported_Functions_Group2 Extended protection operation functions
  *  @brief   Extended protection operation functions
  *
@verbatim
 ===============================================================================
               ##### Extended protection operation functions #####
 ===============================================================================
    [..]
    This subsection provides a set of functions allowing to manage the Extended FLASH
    CRC operations, OTP lock mechanism and option byte keys management.

@endverbatim
  * @{
  */
/**
  * @brief  Configure the OTP Lock.
  *
  * @note   To configure the OTP Lock options, the option lock bit OPTLOCK must be
  *         cleared with the call of the HAL_FLASH_OB_Unlock() function.
  *
  * @param  OTPLBlock Specifies the block(s) to be OTP locked (used for OPTIONBYTE_OTPL).
  *                   The value of this parameter depend on device used within the same series
  *
  * @retval HAL Status
  */
HAL_StatusTypeDef HAL_FLASHEx_OTPLockConfig(uint32_t OTPLBlock)
{
  HAL_StatusTypeDef status;

  /* Check the parameters */
  assert_param(IS_OB_OTP_BLOCK(OTPLBlock));

  /* Process Locked */
  __HAL_LOCK(&pFlash);

  /* Reset error code */
  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);

  if (status == HAL_OK)
  {
    /* Set the bit for the OTP programmation */
    SET_BIT(FLASH->CR, FLASH_CR_PG_OTP);

    /* Set PG_OPT Bit */
    SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT);

    /* Configure the write protected area */
    MODIFY_REG(FLASH->OTPLSRP, FLASH_OTPLSRP_OTPL, (OTPLBlock & FLASH_OTPLSRP_OTPL));

    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);

    /* Clear PG_OPT Bit */
    CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT);

    /* Clear the bit for the OTP programmation */
    CLEAR_BIT(FLASH->CR, FLASH_CR_PG_OTP);
  }

  /* Process Unlocked */
  __HAL_UNLOCK(&pFlash);

  return status;
}

/**
  * @brief  Return the FLASH OTP Lock Option Bytes value.
  *
  * @retval Status of the OTP Lock
  */
uint32_t HAL_FLASHEx_GetOTPLock(void)
{
  return (FLASH->OTPLSR & FLASH_OTPLSR_OTPL);
}

/**
  * @brief  Configure the Keys.
  *
  * @note   To configure the Keys options, the option lock bit OPTLOCK must be
  *         cleared with the call of the HAL_FLASH_OB_Unlock() function.
  *
  * @param  pKeyConfig Key(s) to be configured.
  *
  * @param  pKey Address of the key
  *
  * @retval HAL Status
  */
HAL_StatusTypeDef HAL_FLASHEx_KeyConfig(const FLASH_KeyConfigTypeDef *pKeyConfig, const uint32_t *pKey)
{
  uint32_t index;
  uint32_t index_max;
  const uint32_t *pdata;
  HAL_StatusTypeDef status;

  /* Check the parameters */
  assert_param(IS_KEY_INDEX(pKeyConfig->Index));
  assert_param(IS_KEY_SIZE(pKeyConfig->Size));
  assert_param(IS_KEY_HDPL_LEVEL(pKeyConfig->HDPLLevel));

  /* Process Locked */
  __HAL_LOCK(&pFlash);

  /* Reset error code */
  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);

  if (status == HAL_OK)
  {
    /* Set PG_OPT Bit */
    SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT);

    switch (pKeyConfig->Size)
    {
      case FLASH_KEY_32_BITS :
        index_max = 1U;
        break;

      case FLASH_KEY_64_BITS :
        index_max = 2U;
        break;

      case FLASH_KEY_128_BITS :
        index_max = 4U;
        break;

      case FLASH_KEY_256_BITS :
        index_max = 8U;
        break;

      default:
        /* This case should not occur */
        index_max = 0U;
        break;
    }

    pdata = pKey;
    for (index = 0U; index < index_max; index++)
    {
      FLASH->OBKDR[index] = pdata[index];
    }

    MODIFY_REG(FLASH->OBKCR, (FLASH_OBKCR_OBKINDEX | FLASH_OBKCR_NEXTKL | FLASH_OBKCR_OBKSIZE),
               (pKeyConfig->Index | pKeyConfig->HDPLLevel | pKeyConfig->Size));

    SET_BIT(FLASH->OBKCR, (FLASH_OBKCR_KEYSTART | FLASH_OBKCR_KEYPROG));

    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);

    CLEAR_BIT(FLASH->OBKCR, FLASH_OBKCR_KEYPROG);

    /* Clear PG_OPT Bit */
    CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT);
  }

  /* Process Unlocked */
  __HAL_UNLOCK(&pFlash);

  return status;
}

/**
  * @brief  Load and optionally return the FLASH Option Bytes Key value.
  *
  * @param pKeyConfig Configuration of the key to be loaded and optionally returned
  *
  * @param pKey Address to return the FLASH Option Bytes Key value if not NULL.
  *
  * @retval HAL Status
  */
HAL_StatusTypeDef HAL_FLASHEx_GetKey(const FLASH_KeyConfigTypeDef *pKeyConfig, uint32_t *pKey)
{
  uint32_t index;
  uint32_t index_max;
  uint32_t *pdata;
  HAL_StatusTypeDef status;

  /* Check the parameters */
  assert_param(IS_KEY_INDEX(pKeyConfig->Index));
  assert_param(IS_KEY_SIZE(pKeyConfig->Size));
  assert_param(IS_KEY_HDPL_LEVEL(pKeyConfig->HDPLLevel));

  /* Process Locked */
  __HAL_LOCK(&pFlash);

  /* Reset error code */
  pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);

  if (status == HAL_OK)
  {
    /* Set PG_OPT Bit */
    SET_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT);

    /* Configure index and HDPL level */
    MODIFY_REG(FLASH->OBKCR, (FLASH_OBKCR_OBKINDEX | FLASH_OBKCR_NEXTKL | FLASH_OBKCR_OBKSIZE | FLASH_OBKCR_KEYPROG),
               (pKeyConfig->Index | pKeyConfig->HDPLLevel | pKeyConfig->Size));

    /* Set the start bit to get the key value */
    SET_BIT(FLASH->OBKCR, FLASH_OBKCR_KEYSTART);

    /* Wait for last operation to be completed */
    status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);

    if ((status == HAL_OK) && (pKey != NULL))
    {
      switch (pKeyConfig->Size)
      {
        case FLASH_KEY_32_BITS :
          index_max = 1U;
          break;

        case FLASH_KEY_64_BITS :
          index_max = 2U;
          break;

        case FLASH_KEY_128_BITS :
          index_max = 4U;
          break;

        case FLASH_KEY_256_BITS :
          index_max = 8U;
          break;

        default:
          /* This case should not occur */
          index_max = 0U;
          break;
      }

      pdata = pKey;
      for (index = 0U; index < index_max; index++)
      {
        *pdata = FLASH->OBKDR[index];
        pdata++;
      }
    }

    /* Clear PG_OPT Bit */
    CLEAR_BIT(FLASH->OPTCR, FLASH_OPTCR_PG_OPT);
  }

  /* Process Unlocked */
  __HAL_UNLOCK(&pFlash);

  return status;
}

/**
  * @brief  Perform a CRC computation on the specified FLASH memory area
  * @param  pCRCInit pointer to an FLASH_CRCInitTypeDef structure that
  *         contains the configuration information for the CRC computation.
  * @param  CRC_Result pointer to CRC result
  * @note   CRC computation uses CRC-32 (Ethernet) polynomial 0x4C11DB7
  * @retval HAL Status
  */
HAL_StatusTypeDef HAL_FLASHEx_ComputeCRC(const FLASH_CRCInitTypeDef *pCRCInit, uint32_t *CRC_Result)
{
  HAL_StatusTypeDef status;
  uint32_t sector_index;

  /* Check the parameters */
  assert_param(IS_FLASH_TYPE_CRC(pCRCInit->TypeCRC));
  assert_param(IS_FLASH_BURST_SIZE_CRC(pCRCInit->BurstSize));

  /* Wait for last operation to be completed */
  status = FLASH_WaitForLastOperation(FLASH_TIMEOUT_VALUE);

  if (status == HAL_OK)
  {
    /* Process Locked */
    __HAL_LOCK(&pFlash);

    /* Reset error code */
    pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;

    /* Enable CRC feature */
    SET_BIT(FLASH->CR, FLASH_CR_CRC_EN);

    /* Clear CRC flags in Status Register: CRC end of calculation and CRC read error */
    FLASH->ICR = (FLASH_ICR_CRCRDERRF | FLASH_ICR_CRCENDF);

    /* Clear current CRC result and program burst size */
    MODIFY_REG(FLASH->CRCCR, (FLASH_CRCCR_CLEAN_CRC | FLASH_CRCCR_CRC_BURST),
               (FLASH_CRCCR_CLEAN_CRC | pCRCInit->BurstSize));

    if (pCRCInit->TypeCRC == FLASH_CRC_SECTORS)
    {
      /* Select CRC by sector and clear sectors list */
      SET_BIT(FLASH->CRCCR, (FLASH_CRCCR_CRC_BY_SECT | FLASH_CRCCR_CLEAN_SECT));

      /* Select CRC sectors */
      for (sector_index = pCRCInit->Sector; sector_index < (pCRCInit->NbSectors + pCRCInit->Sector); sector_index++)
      {
        FLASH_CRC_AddSector(sector_index);
      }
    }
    else if (pCRCInit->TypeCRC == FLASH_CRC_BANK)
    {
      /* Select CRC by sector and all sectors */
      SET_BIT(FLASH->CRCCR, (FLASH_CRCCR_CRC_BY_SECT | FLASH_CRCCR_ALL_SECT));
    }
    else
    {
      /* Select CRC by address */
      CLEAR_BIT(FLASH->CRCCR, FLASH_CRCCR_CRC_BY_SECT);

      /* Select CRC start and end addresses */
      FLASH_CRC_SelectAddress(pCRCInit->CRCStartAddr, pCRCInit->CRCEndAddr);
    }

    /* Start the CRC calculation */
    SET_BIT(FLASH->CRCCR, FLASH_CRCCR_START_CRC);

    /* Wait on CRC busy flag */
    status = FLASH_CRC_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);

    /* Return CRC result */
    (*CRC_Result) = FLASH->CRCDATAR;

    /* Disable CRC feature */
    CLEAR_BIT(FLASH->CR, FLASH_CR_CRC_EN);

    /* Clear CRC flags */
    FLASH->ICR = (FLASH_ICR_CRCRDERRF | FLASH_ICR_CRCENDF);

    /* Process Unlocked */
    __HAL_UNLOCK(&pFlash);
  }

  return status;
}

/**
  * @}
  */

/** @defgroup FLASHEx_Exported_Functions_Group3 Extended ECC operation functions
  *  @brief   Extended ECC operation functions
  *
@verbatim
 ===============================================================================
                  ##### Extended ECC operation functions #####
 ===============================================================================
    [..]
    This subsection provides a set of functions allowing to manage the Extended FLASH
    ECC Operations.

@endverbatim
  * @{
  */
/**
  * @brief  Enable ECC correction interrupt
  * @retval None
  */
void HAL_FLASHEx_EnableEccCorrectionInterrupt(void)
{
  __HAL_FLASH_ENABLE_IT(FLASH_IT_SNECCERR);
}

/**
  * @brief  Disable ECC correction interrupt
  * @retval None
  */
void HAL_FLASHEx_DisableEccCorrectionInterrupt(void)
{
  __HAL_FLASH_DISABLE_IT(FLASH_IT_SNECCERR);
}

/**
  * @brief  Enable ECC detection interrupt
  * @retval None
  */
void HAL_FLASHEx_EnableEccDetectionInterrupt(void)
{
  __HAL_FLASH_ENABLE_IT(FLASH_IT_DBECCERR);
}

/**
  * @brief  Disable ECC detection interrupt
  * @retval None
  */
void HAL_FLASHEx_DisableEccDetectionInterrupt(void)
{
  __HAL_FLASH_DISABLE_IT(FLASH_IT_DBECCERR);
}

/**
  * @brief  Get the ECC error information.
  * @param  pData Pointer to an FLASH_EccInfoTypeDef structure that contains the
  *         ECC error information.
  * @note   This function should be called before ECC bit is cleared
  *         (in callback function)
  * @retval None
  */
void HAL_FLASHEx_GetEccInfo(FLASH_EccInfoTypeDef *pData)
{
  /* Check Null pointer */
  assert_param(pData != NULL);

  /* Set address which generate ECC error */
  if ((FLASH->ISR & FLASH_FLAG_SNECCERR) != 0U)
  {
    pData->Address = FLASH->ECCSFADDR;
  }
  else
  {
    pData->Address = FLASH->ECCDFADDR;
  }

  /* Set area according address */
  if (IS_FLASH_MAIN_MEM_ADDRESS(pData->Address))
  {
    pData->Area = FLASH_ECC_AREA_USER_BANK1;
  }
  else if (IS_FLASH_OTP_ADDRESS(pData->Address))
  {
    pData->Area = FLASH_ECC_AREA_OTP;
  }
  else if ((pData->Address >= SYSTEM_FLASH_BASE) &&
           (pData->Address < (SYSTEM_FLASH_BASE + SYSTEM_FLASH_SIZE)))
  {
    pData->Area = FLASH_ECC_AREA_SYSTEM;
  }
  else
  {
    pData->Area = FLASH_ECC_AREA_READ_ONLY;
  }

  /* Set Master which initiates transaction. On H7RS, it's necessary CPU1 */
  pData->MasterID = FLASH_ECC_MASTER_CPU1;
}

/**
  * @brief  Handle Flash ECC Detection interrupt request.
  * @note   On STM32H7RS, this Irq Handler should be called in Bus Fault
  *         interrupt subroutine.
  * @retval None
  */
void HAL_FLASHEx_ECCD_IRQHandler(void)
{
  /* Check ECC Detection Error */
  if ((FLASH->ISR & FLASH_FLAG_DBECCERR) != 0U)
  {
    /* Call User callback */
    HAL_FLASHEx_EccDetectionCallback();

    /* Clear ECC detection flag in order to allow new ECC error record */
    FLASH->ICR = FLASH_FLAG_DBECCERR;
  }
}

/**
  * @brief  FLASH ECC Correction interrupt callback.
  * @retval None
  */
__weak void HAL_FLASHEx_EccCorrectionCallback(void)
{
  /* NOTE : This function should not be modified, when the callback is needed,
            the HAL_FLASHEx_EccCorrectionCallback could be implemented in the user file
   */
}

/**
  * @brief  FLASH ECC Detection interrupt callback.
  * @retval None
  */
__weak void HAL_FLASHEx_EccDetectionCallback(void)
{
  /* NOTE : This function should not be modified, when the callback is needed,
            the HAL_FLASHEx_EccDetectionCallback could be implemented in the user file
   */
}

/**
  * @}
  */

/**
  * @}
  */

/* Private functions ---------------------------------------------------------*/

/** @addtogroup FLASHEx_Private_Functions
  * @{
  */
/**
  * @brief  Mass erase of FLASH memory.
  * @retval None
  */
static void FLASH_MassErase(void)
{
  /* Set the Mass Erase Bit and proceed to erase */
  SET_BIT(FLASH->CR, (FLASH_CR_BER | FLASH_CR_START));
}

/**
  * @brief  Erase the specified FLASH memory sector.
  * @param  Sector FLASH sector to erase
  *         This parameter must be a value between 0 and (max number of sectors in the bank - 1)
  * @retval None
  */
void FLASH_SectorErase(uint32_t Sector)
{
  /* Check the parameters */
  assert_param(IS_FLASH_SECTOR(Sector));

  /* Proceed to erase the page */
  MODIFY_REG(FLASH->CR, (FLASH_CR_SSN | FLASH_CR_SER | FLASH_CR_START), \
             ((Sector << FLASH_CR_SSN_Pos) | FLASH_CR_SER | FLASH_CR_START));
}

/**
  * @brief  Configure the write protection of the desired sectors.
  *
  * @note   To configure the WRP options, the option lock bit OPTLOCK must be
  *         cleared with the call of the HAL_FLASH_OB_Unlock() function.
  *
  * @param  WRPState
  *
  * @param  WRPSector
  *
  * @retval None
  */
static void FLASH_OB_WRPConfig(uint32_t WRPState, uint32_t WRPSector)
{
  /* Check the parameters */
  assert_param(IS_OB_WRPSTATE(WRPState));

  /* Configure the write protected area */
  if (WRPState == OB_WRPSTATE_DISABLE)
  {
    FLASH->WRPSRP |= (WRPSector & FLASH_WRPSRP_WRPS);
  }
  else if (WRPState == OB_WRPSTATE_ENABLE)
  {
    FLASH->WRPSRP &= (~(WRPSector & FLASH_WRPSRP_WRPS));
  }
  else
  {
    /* Empty statement (to be compliant MISRA 15.7) */
  }
}

/**
  * @brief  Program the FLASH User Option Byte.
  *
  * @note   To configure the user option bytes, the option lock bit OPTLOCK must
  *         be cleared with the call of the HAL_FLASH_OB_Unlock() function.
  * @param  UserType: The FLASH User Option Bytes to be modified.
  *         This parameter can be a combination of @ref FLASH_OB_USER_TYPE
  * @param  UserConfig1 The selected User Option Bytes values
  * @param  UserConfig2 The selected User Option Bytes values
  * @retval None
  */
static void FLASH_OB_UserConfig(uint32_t UserType, uint32_t UserConfig1, uint32_t UserConfig2)
{
  uint32_t optr_reg_val = 0;
  uint32_t optr_reg_mask = 0;

  /* Check the parameters */
  assert_param(IS_OB_USER_TYPE(UserType));

  if ((UserType & OB_USER_BOR_LEV) != 0U)
  {
    /* BOR level option byte should be modified */
    assert_param(IS_OB_USER_BOR_LEVEL(UserConfig1 & FLASH_OBW1SR_BOR_LEVEL));

    /* Set value and mask for BOR level option byte */
    optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_BOR_LEVEL);
    optr_reg_mask |= FLASH_OBW1SR_BOR_LEVEL;
  }

  if ((UserType & OB_USER_IWDG_SW) != 0U)
  {
    /* IWDG1_HW option byte should be modified */
    assert_param(IS_OB_USER_IWDG(UserConfig1 & FLASH_OBW1SR_IWDG_HW));

    /* Set value and mask for IWDG1_HW option byte */
    optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_IWDG_HW);
    optr_reg_mask |= FLASH_OBW1SR_IWDG_HW;
  }

  if ((UserType & OB_USER_NRST_STOP) != 0U)
  {
    /* NRST_STOP_D1 option byte should be modified */
    assert_param(IS_OB_USER_STOP(UserConfig1 & FLASH_OBW1SR_NRST_STOP));

    /* Set value and mask for NRST_STOP_D1 option byte */
    optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_NRST_STOP);
    optr_reg_mask |= FLASH_OBW1SR_NRST_STOP;
  }

  if ((UserType & OB_USER_NRST_STDBY) != 0U)
  {
    /* NRST_STBY_D1 option byte should be modified */
    assert_param(IS_OB_USER_STANDBY(UserConfig1 & FLASH_OBW1SR_NRST_STBY));

    /* Set value and mask for NRST_STBY_D1 option byte */
    optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_NRST_STBY);
    optr_reg_mask |= FLASH_OBW1SR_NRST_STBY;
  }

  if ((UserType & OB_USER_XSPI1_HSLV) != 0U)
  {
    /* XSPI1_HSLV option byte should be modified */
    assert_param(IS_OB_USER_XSPI1_HSLV(UserConfig1 & FLASH_OBW1SR_XSPI1_HSLV));

    /* Set value and mask for XSPI1_HSLV option byte */
    optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_XSPI1_HSLV);
    optr_reg_mask |= FLASH_OBW1SR_XSPI1_HSLV;
  }

  if ((UserType & OB_USER_XSPI2_HSLV) != 0U)
  {
    /* XSPI2_HSLV option byte should be modified */
    assert_param(IS_OB_USER_XSPI2_HSLV(UserConfig1 & FLASH_OBW1SR_XSPI2_HSLV));

    /* Set value and mask for XSPI2_HSLV option byte */
    optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_XSPI2_HSLV);
    optr_reg_mask |= FLASH_OBW1SR_XSPI2_HSLV;
  }

  if ((UserType & OB_USER_IWDG_STOP) != 0U)
  {
    /* IWDG_FZ_STOP option byte should be modified */
    assert_param(IS_OB_USER_IWDG_STOP(UserConfig1 & FLASH_OBW1SR_IWDG_FZ_STOP));

    /* Set value and mask for IWDG_FZ_STOP option byte */
    optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_IWDG_FZ_STOP);
    optr_reg_mask |= FLASH_OBW1SR_IWDG_FZ_STOP;
  }

  if ((UserType & OB_USER_IWDG_STDBY) != 0U)
  {
    /* IWDG_FZ_SDBY option byte should be modified */
    assert_param(IS_OB_USER_IWDG_STDBY(UserConfig1 & FLASH_OBW1SR_IWDG_FZ_STBY));

    /* Set value and mask for IWDG_FZ_SDBY option byte */
    optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_IWDG_FZ_STBY);
    optr_reg_mask |= FLASH_OBW1SR_IWDG_FZ_STBY;
  }

  if ((UserType & OB_USER_VDDIO_HSLV) != 0U)
  {
    /* VDDIO_HSLV option byte should be modified */
    assert_param(IS_OB_USER_VDDIO_HSLV(UserConfig1 & FLASH_OBW1SR_VDDIO_HSLV));

    /* Set value and mask for VDDIO_HSLV option byte */
    optr_reg_val |= (UserConfig1 & FLASH_OBW1SR_VDDIO_HSLV);
    optr_reg_mask |= FLASH_OBW1SR_VDDIO_HSLV;
  }

  /* Configure the option bytes register 1 if necessary */
  if (optr_reg_mask != 0U)
  {
    MODIFY_REG(FLASH->OBW1SRP, optr_reg_mask, optr_reg_val);
  }

  optr_reg_val = 0;
  optr_reg_mask = 0;

  if ((UserType & OB_USER_ITCM_AXI_SHARE) != 0U)
  {
    /* ITCM_AXI_SHARE option byte should be modified */
    assert_param(IS_OB_USER_ITCM_AXI_SHARE(UserConfig2 & FLASH_OBW2SR_ITCM_AXI_SHARE));

    /* Set value and mask for ITCM_AXI_SHARE option byte */
    optr_reg_val |= (UserConfig2 & FLASH_OBW2SR_ITCM_AXI_SHARE);
    optr_reg_mask |= FLASH_OBW2SR_ITCM_AXI_SHARE;
  }

  if ((UserType & OB_USER_DTCM_AXI_SHARE) != 0U)
  {
    /* DTCM_AXI_SHARE option byte should be modified */
    assert_param(IS_OB_USER_DTCM_AXI_SHARE(UserConfig2 & FLASH_OBW2SR_DTCM_AXI_SHARE));

    /* Set value and mask for DTCM_AXI_SHARE option byte */
    optr_reg_val |= (UserConfig2 & FLASH_OBW2SR_DTCM_AXI_SHARE);
    optr_reg_mask |= FLASH_OBW2SR_DTCM_AXI_SHARE;
  }

  if ((UserType & OB_USER_SRAM_ECC) != 0U)
  {
    /* SRAM_ECC option byte should be modified */
    assert_param(IS_OB_USER_AXISRAM_ECC(UserConfig2 & FLASH_OBW2SR_ECC_ON_SRAM));

    /* Set value and mask for SRAM_ECC option byte */
    optr_reg_val |= (UserConfig2 & FLASH_OBW2SR_ECC_ON_SRAM);
    optr_reg_mask |= FLASH_OBW2SR_ECC_ON_SRAM;
  }

  if ((UserType & OB_USER_I2C_NI3C) != 0U)
  {
    /* I2C_NI3C option byte should be modified */
    assert_param(IS_OB_USER_I2C_NI3C(UserConfig2 & FLASH_OBW2SR_I2C_NI3C));

    /* Set value and mask for I2C_NI3C option byte */
    optr_reg_val |= (UserConfig2 & FLASH_OBW2SR_I2C_NI3C);
    optr_reg_mask |= FLASH_OBW2SR_I2C_NI3C;
  }

  /* Configure the option bytes register 2 if necessary */
  if (optr_reg_mask != 0U)
  {
    MODIFY_REG(FLASH->OBW2SRP, optr_reg_mask, optr_reg_val);
  }
}

/**
  * @brief  Configure the Hide Protection.
  *
  * @note   To configure the HDP options, the option lock bit OPTLOCK must be
  *         cleared with the call of the HAL_FLASH_OB_Unlock() function.
  *
  * @param  HDPStartPage
  *
  * @param  HDPEndPage
  *
  * @retval None
  */
static void FLASH_OB_HDPConfig(uint32_t HDPStartPage, uint32_t HDPEndPage)
{
  /* Check the parameters */
  assert_param(IS_OB_HDP_PAGE(HDPStartPage));
  assert_param(IS_OB_HDP_PAGE(HDPEndPage));

  MODIFY_REG(FLASH->HDPSRP, (FLASH_HDPSRP_HDP_AREA_START | FLASH_HDPSRP_HDP_AREA_END), \
             (HDPStartPage | (HDPEndPage << FLASH_HDPSRP_HDP_AREA_END_Pos)));
}

/**
  * @brief  Configure the Non-Volatile state.
  *
  * @note   To configure the Non-volatile options, the option lock bit OPTLOCK must be
  *         cleared with the call of the HAL_FLASH_OB_Unlock() function.
  *
  * @param  NVState
  *
  * @retval None
  */
static void FLASH_OB_NVConfig(uint32_t NVState)
{
  /* Check the parameter */
  assert_param(IS_OB_NVSTATE(NVState));

  MODIFY_REG(FLASH->NVSRP, FLASH_NVSRP_NVSTATE, NVState);
}

/**
  * @brief  Return the FLASH Write Protection Option Bytes value.
  *
  * @param  WRPState
  *
  * @param  WRPSector
  *
  * @retval None
  */
static void FLASH_OB_GetWRP(uint32_t *WRPState, uint32_t *WRPSector)
{
  if ((FLASH->WRPSR & FLASH_WRPSR_WRPS) == FLASH_WRPSR_WRPS)
  {
    /* All sectors aren't write protected */
    *WRPState = OB_WRPSTATE_DISABLE;
  }
  else
  {
    /* Some sectors are write protected */
    *WRPState = OB_WRPSTATE_ENABLE;
    *WRPSector = ((~(FLASH->WRPSR)) & FLASH_WRPSR_WRPS);
  }
}

/**
  * @brief  Return the FLASH User Option Byte value.
  *
  * @param UserConfig1 Address to return the FLASH User Option Bytes values configuration 1.
  *         The return value can be a combination of
  * @param UserConfig2 Address to return the FLASH User Option Bytes values configuration 2.
  *         The return value can be a combination of
  *
  * @retval None
  */
static void FLASH_OB_GetUser(uint32_t *UserConfig1, uint32_t *UserConfig2)
{
  *UserConfig1 = FLASH->OBW1SR;
  *UserConfig2 = FLASH->OBW2SR;
}

/**
  * @brief  Return the FLASH Hide Protection Option Bytes value.
  *
  * @param HDPStartPage Address to return the FLASH HDP Option Bytes Start Sector.
  *         The return value can be a combination of
  * @param HDPEndPage Address to return the FLASH HDP Option Bytes End Sector.
  *         The return value can be a combination of
  *
  * @retval None
  */
static void FLASH_OB_GetHDP(uint32_t *HDPStartPage, uint32_t *HDPEndPage)
{
  *HDPStartPage = (FLASH->HDPSR & FLASH_HDPSR_HDP_AREA_START);
  *HDPEndPage = ((FLASH->HDPSR & FLASH_HDPSR_HDP_AREA_END) >> FLASH_HDPSR_HDP_AREA_END_Pos);
}

/**
  * @brief  Return the FLASH Non-volatile state Option Bytes value.
  *
  * @retval Value of Non-volatile state
  */
static uint32_t FLASH_OB_GetNV(void)
{
  return (FLASH->NVSR & FLASH_NVSR_NVSTATE);
}

/**
  * @brief  Return the FLASH RoT Option Bytes value.
  *
  * @retval Value of the RoT
  */
static uint32_t FLASH_OB_GetRoT(void)
{
  return (FLASH->ROTSR & (FLASH_ROTSR_OEM_PROVD | FLASH_ROTSR_DBG_AUTH | FLASH_ROTSR_IROT_SELECT));
}

/**
  * @brief  Return the FLASH Epoch Option Bytes value.
  *
  * @retval Value of the Epoch
  */
static uint32_t FLASH_OB_GetEpoch(void)
{
  return (FLASH->EPOCHSR & FLASH_EPOCHSR_EPOCH);
}

/**
  * @brief  Add a CRC sector to the list of sectors on which the CRC will be calculated
  * @param  Sector Specifies the CRC sector number
  * @retval None
  */
static void FLASH_CRC_AddSector(uint32_t Sector)
{
  /* Check the parameters */
  assert_param(IS_FLASH_SECTOR(Sector));

  /* Clear CRC sector */
  MODIFY_REG(FLASH->CRCCR, FLASH_CRCCR_CRC_SECT, Sector);

  /* Activate ADD_SECT bit */
  SET_BIT(FLASH->CRCCR, FLASH_CRCCR_ADD_SECT);
}

/**
  * @brief  Select CRC start and end memory addresses on which the CRC will be calculated
  * @param  CRCStartAddr Specifies the CRC start address
  * @param  CRCEndAddr Specifies the CRC end address
  * @retval None
  */
static void FLASH_CRC_SelectAddress(uint32_t CRCStartAddr, uint32_t CRCEndAddr)
{
  assert_param(IS_FLASH_MAIN_MEM_ADDRESS(CRCStartAddr));
  assert_param(IS_FLASH_MAIN_MEM_ADDRESS(CRCEndAddr));

  /* Write CRC Start and End addresses */
  FLASH->CRCSADDR = (CRCStartAddr - FLASH_BASE);
  FLASH->CRCEADDR = (CRCEndAddr - FLASH_BASE);
}

/**
  * @brief  Wait for a FLASH CRC computation to complete.
  * @param  Timeout maximum flash operation timeout
  * @retval HAL_StatusTypeDef HAL Status
  */
static HAL_StatusTypeDef FLASH_CRC_WaitForLastOperation(uint32_t Timeout)
{
  uint32_t timeout = HAL_GetTick() + Timeout;

  /* Wait for the FLASH CRC computation to complete by polling on CRC_BUSY flag to be reset */
  while ((FLASH->SR & FLASH_SR_CRC_BUSY) != 0U)
  {
    if (HAL_GetTick() >= timeout)
    {
      return HAL_TIMEOUT;
    }
  }

  /* Check FLASH CRC calculation error flag  */
  if ((FLASH->ISR & FLASH_FLAG_CRCERR) != 0U)
  {
    /*Save the error code*/
    pFlash.ErrorCode |= HAL_FLASH_ERROR_CRC;

    /* Clear CRC error flag */
    FLASH->ICR = FLASH_FLAG_CRCERR;

    return HAL_ERROR;
  }

  /* Check FLASH CRC End of Calculation flag  */
  if ((FLASH->ISR & FLASH_FLAG_CRCEND) != 0U)
  {
    /* Clear FLASH End of Calculation pending bit */
    FLASH->ICR = FLASH_FLAG_CRCEND;
  }

  /* If there is no error flag set */
  return HAL_OK;
}

/**
  * @}
  */

/**
  * @}
  */

#endif /* HAL_FLASH_MODULE_ENABLED */

/**
  * @}
  */

/**
  * @}
  */