/** ****************************************************************************** * @file stm32l5xx_hal_crc.h * @author MCD Application Team * @brief Header file of CRC HAL module. ****************************************************************************** * @attention * * Copyright (c) 2019 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32L5xx_HAL_CRC_H #define STM32L5xx_HAL_CRC_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32l5xx_hal_def.h" /** @addtogroup STM32L5xx_HAL_Driver * @{ */ /** @addtogroup CRC * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup CRC_Exported_Types CRC Exported Types * @{ */ /** * @brief CRC HAL State Structure definition */ typedef enum { HAL_CRC_STATE_RESET = 0x00U, /*!< CRC not yet initialized or disabled */ HAL_CRC_STATE_READY = 0x01U, /*!< CRC initialized and ready for use */ HAL_CRC_STATE_BUSY = 0x02U, /*!< CRC internal process is ongoing */ HAL_CRC_STATE_TIMEOUT = 0x03U, /*!< CRC timeout state */ HAL_CRC_STATE_ERROR = 0x04U /*!< CRC error state */ } HAL_CRC_StateTypeDef; /** * @brief CRC Init Structure definition */ typedef struct { uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used. If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1. In that case, there is no need to set GeneratingPolynomial field. If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set. */ uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used. If set to DEFAULT_INIT_VALUE_ENABLE, resort to default 0xFFFFFFFF value. In that case, there is no need to set InitValue field. If otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set. */ uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial as a 7, 8, 16 or 32-bit long value for a polynomial degree respectively equal to 7, 8, 16 or 32. This field is written in normal, representation e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65. No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE. */ uint32_t CRCLength; /*!< This parameter is a value of @ref CRC_Polynomial_Sizes and indicates CRC length. Value can be either one of @arg @ref CRC_POLYLENGTH_32B (32-bit CRC), @arg @ref CRC_POLYLENGTH_16B (16-bit CRC), @arg @ref CRC_POLYLENGTH_8B (8-bit CRC), @arg @ref CRC_POLYLENGTH_7B (7-bit CRC). */ uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse is set to DEFAULT_INIT_VALUE_ENABLE. */ uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode. Can be either one of the following values @arg @ref CRC_INPUTDATA_INVERSION_NONE no input data inversion @arg @ref CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2 @arg @ref CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C @arg @ref CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */ uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode. Can be either @arg @ref CRC_OUTPUTDATA_INVERSION_DISABLE no CRC inversion, @arg @ref CRC_OUTPUTDATA_INVERSION_ENABLE CRC 0x11223344 is converted into 0x22CC4488 */ } CRC_InitTypeDef; /** * @brief CRC Handle Structure definition */ typedef struct { CRC_TypeDef *Instance; /*!< Register base address */ CRC_InitTypeDef Init; /*!< CRC configuration parameters */ HAL_LockTypeDef Lock; /*!< CRC Locking object */ __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */ uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format. Can be either @arg @ref CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes (8-bit data) @arg @ref CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of half-words (16-bit data) @arg @ref CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words (32-bit data) Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error must occur if InputBufferFormat is not one of the three values listed above */ } CRC_HandleTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup CRC_Exported_Constants CRC Exported Constants * @{ */ /** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial * @{ */ #define DEFAULT_CRC32_POLY 0x04C11DB7U /*!< X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1 */ /** * @} */ /** @defgroup CRC_Default_InitValue Default CRC computation initialization value * @{ */ #define DEFAULT_CRC_INITVALUE 0xFFFFFFFFU /*!< Initial CRC default value */ /** * @} */ /** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used * @{ */ #define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00U) /*!< Enable default generating polynomial 0x04C11DB7 */ #define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01U) /*!< Disable default generating polynomial 0x04C11DB7 */ /** * @} */ /** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used * @{ */ #define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00U) /*!< Enable initial CRC default value */ #define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01U) /*!< Disable initial CRC default value */ /** * @} */ /** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the peripheral * @{ */ #define CRC_POLYLENGTH_32B 0x00000000U /*!< Resort to a 32-bit long generating polynomial */ #define CRC_POLYLENGTH_16B CRC_CR_POLYSIZE_0 /*!< Resort to a 16-bit long generating polynomial */ #define CRC_POLYLENGTH_8B CRC_CR_POLYSIZE_1 /*!< Resort to a 8-bit long generating polynomial */ #define CRC_POLYLENGTH_7B CRC_CR_POLYSIZE /*!< Resort to a 7-bit long generating polynomial */ /** * @} */ /** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions * @{ */ #define HAL_CRC_LENGTH_32B 32U /*!< 32-bit long CRC */ #define HAL_CRC_LENGTH_16B 16U /*!< 16-bit long CRC */ #define HAL_CRC_LENGTH_8B 8U /*!< 8-bit long CRC */ #define HAL_CRC_LENGTH_7B 7U /*!< 7-bit long CRC */ /** * @} */ /** @defgroup CRC_Input_Buffer_Format Input Buffer Format * @{ */ /* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for * the CRC APIs to provide a correct result */ #define CRC_INPUTDATA_FORMAT_UNDEFINED 0x00000000U /*!< Undefined input data format */ #define CRC_INPUTDATA_FORMAT_BYTES 0x00000001U /*!< Input data in byte format */ #define CRC_INPUTDATA_FORMAT_HALFWORDS 0x00000002U /*!< Input data in half-word format */ #define CRC_INPUTDATA_FORMAT_WORDS 0x00000003U /*!< Input data in word format */ /** * @} */ /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @defgroup CRC_Exported_Macros CRC Exported Macros * @{ */ /** @brief Reset CRC handle state. * @param __HANDLE__ CRC handle. * @retval None */ #define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET) /** * @brief Reset CRC Data Register. * @param __HANDLE__ CRC handle * @retval None */ #define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET) /** * @brief Set CRC INIT non-default value * @param __HANDLE__ CRC handle * @param __INIT__ 32-bit initial value * @retval None */ #define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__)) /** * @brief Store data in the Independent Data (ID) register. * @param __HANDLE__ CRC handle * @param __VALUE__ Value to be stored in the ID register * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits * @retval None */ #define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__))) /** * @brief Return the data stored in the Independent Data (ID) register. * @param __HANDLE__ CRC handle * @note Refer to the Reference Manual to get the authorized __VALUE__ length in bits * @retval Value of the ID register */ #define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR) /** * @} */ /* Private macros --------------------------------------------------------*/ /** @defgroup CRC_Private_Macros CRC Private Macros * @{ */ #define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \ ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE)) #define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \ ((VALUE) == DEFAULT_INIT_VALUE_DISABLE)) #define IS_CRC_POL_LENGTH(LENGTH) (((LENGTH) == CRC_POLYLENGTH_32B) || \ ((LENGTH) == CRC_POLYLENGTH_16B) || \ ((LENGTH) == CRC_POLYLENGTH_8B) || \ ((LENGTH) == CRC_POLYLENGTH_7B)) #define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \ ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \ ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS)) /** * @} */ /* Include CRC HAL Extended module */ #include "stm32l5xx_hal_crc_ex.h" /* Exported functions --------------------------------------------------------*/ /** @defgroup CRC_Exported_Functions CRC Exported Functions * @{ */ /* Initialization and de-initialization functions ****************************/ /** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions * @{ */ HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc); HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc); void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc); void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc); /** * @} */ /* Peripheral Control functions ***********************************************/ /** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions * @{ */ uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); /** * @} */ /* Peripheral State and Error functions ***************************************/ /** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions * @{ */ HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc); /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* STM32L5xx_HAL_CRC_H */