/** ****************************************************************************** * @file stm32l5xx_ll_fmc.c * @author MCD Application Team * @brief FMC Low Layer HAL module driver. * * This file provides firmware functions to manage the following * functionalities of the Flexible Memory Controller (FMC) peripheral memories: * + Initialization/de-initialization functions * + Peripheral Control functions * + Peripheral State functions * ****************************************************************************** * @attention * * Copyright (c) 2019 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** @verbatim ============================================================================== ##### FMC peripheral features ##### ============================================================================== [..] The Flexible memory controller (FMC) includes following memory controllers: (+) The NOR/PSRAM memory controller (+) The NAND memory controller [..] The FMC functional block makes the interface with synchronous and asynchronous static memories. Its main purposes are: (+) to translate AHB transactions into the appropriate external device protocol (+) to meet the access time requirements of the external memory devices [..] All external memories share the addresses, data and control signals with the controller. Each external device is accessed by means of a unique Chip Select. The FMC performs only one access at a time to an external device. The main features of the FMC controller are the following: (+) Interface with static-memory mapped devices including: (++) Static random access memory (SRAM) (++) Read-only memory (ROM) (++) NOR Flash memory/OneNAND Flash memory (++) PSRAM (4 memory banks) (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of data (+) Independent Chip Select control for each memory bank (+) Independent configuration for each memory bank @endverbatim ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32l5xx_hal.h" /** @addtogroup STM32L5xx_HAL_Driver * @{ */ #if defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_SRAM_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) /** @defgroup FMC_LL FMC Low Layer * @brief FMC driver modules * @{ */ /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /** @defgroup FMC_LL_Private_Constants FMC Low Layer Private Constants * @{ */ /* ----------------------- FMC registers bit mask --------------------------- */ /* --- BCR Register ---*/ /* BCR register clear mask */ /* --- BTR Register ---*/ /* BTR register clear mask */ #define BTR_CLEAR_MASK ((uint32_t)(FMC_BTRx_ADDSET | FMC_BTRx_ADDHLD |\ FMC_BTRx_DATAST | FMC_BTRx_BUSTURN |\ FMC_BTRx_CLKDIV | FMC_BTRx_DATLAT |\ FMC_BTRx_ACCMOD | FMC_BTRx_DATAHLD)) /* --- BWTR Register ---*/ /* BWTR register clear mask */ #define BWTR_CLEAR_MASK ((uint32_t)(FMC_BWTRx_ADDSET | FMC_BWTRx_ADDHLD |\ FMC_BWTRx_DATAST | FMC_BWTRx_BUSTURN |\ FMC_BWTRx_ACCMOD | FMC_BWTRx_DATAHLD)) /* --- PCR Register ---*/ /* PCR register clear mask */ #define PCR_CLEAR_MASK ((uint32_t)(FMC_PCR_PWAITEN | FMC_PCR_PBKEN | \ FMC_PCR_PTYP | FMC_PCR_PWID | \ FMC_PCR_ECCEN | FMC_PCR_TCLR | \ FMC_PCR_TAR | FMC_PCR_ECCPS)) /* --- PMEM Register ---*/ /* PMEM register clear mask */ #define PMEM_CLEAR_MASK ((uint32_t)(FMC_PMEM_MEMSET | FMC_PMEM_MEMWAIT |\ FMC_PMEM_MEMHOLD | FMC_PMEM_MEMHIZ)) /* --- PATT Register ---*/ /* PATT register clear mask */ #define PATT_CLEAR_MASK ((uint32_t)(FMC_PATT_ATTSET | FMC_PATT_ATTWAIT |\ FMC_PATT_ATTHOLD | FMC_PATT_ATTHIZ)) /** * @} */ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /* Exported functions --------------------------------------------------------*/ /** @defgroup FMC_LL_Exported_Functions FMC Low Layer Exported Functions * @{ */ /** @defgroup FMC_LL_Exported_Functions_NORSRAM FMC Low Layer NOR SRAM Exported Functions * @brief NORSRAM Controller functions * @verbatim ============================================================================== ##### How to use NORSRAM device driver ##### ============================================================================== [..] This driver contains a set of APIs to interface with the FMC NORSRAM banks in order to run the NORSRAM external devices. (+) FMC NORSRAM bank reset using the function FMC_NORSRAM_DeInit() (+) FMC NORSRAM bank control configuration using the function FMC_NORSRAM_Init() (+) FMC NORSRAM bank timing configuration using the function FMC_NORSRAM_Timing_Init() (+) FMC NORSRAM bank extended timing configuration using the function FMC_NORSRAM_Extended_Timing_Init() (+) FMC NORSRAM bank enable/disable write operation using the functions FMC_NORSRAM_WriteOperation_Enable()/FMC_NORSRAM_WriteOperation_Disable() @endverbatim * @{ */ /** @defgroup FMC_LL_NORSRAM_Exported_Functions_Group1 Initialization and de-initialization functions * @brief Initialization and Configuration functions * @verbatim ============================================================================== ##### Initialization and de_initialization functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Initialize and configure the FMC NORSRAM interface (+) De-initialize the FMC NORSRAM interface (+) Configure the FMC clock and associated GPIOs @endverbatim * @{ */ /** * @brief Initialize the FMC_NORSRAM device according to the specified * control parameters in the FMC_NORSRAM_InitTypeDef * @param Device Pointer to NORSRAM device instance * @param Init Pointer to NORSRAM Initialization structure * @retval HAL status */ HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init) { uint32_t flashaccess; uint32_t btcr_reg; uint32_t mask; /* Check the parameters */ assert_param(IS_FMC_NORSRAM_DEVICE(Device)); assert_param(IS_FMC_NORSRAM_BANK(Init->NSBank)); assert_param(IS_FMC_MUX(Init->DataAddressMux)); assert_param(IS_FMC_MEMORY(Init->MemoryType)); assert_param(IS_FMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth)); assert_param(IS_FMC_BURSTMODE(Init->BurstAccessMode)); assert_param(IS_FMC_WAIT_POLARITY(Init->WaitSignalPolarity)); assert_param(IS_FMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive)); assert_param(IS_FMC_WRITE_OPERATION(Init->WriteOperation)); assert_param(IS_FMC_WAITE_SIGNAL(Init->WaitSignal)); assert_param(IS_FMC_EXTENDED_MODE(Init->ExtendedMode)); assert_param(IS_FMC_ASYNWAIT(Init->AsynchronousWait)); assert_param(IS_FMC_WRITE_BURST(Init->WriteBurst)); assert_param(IS_FMC_CONTINOUS_CLOCK(Init->ContinuousClock)); assert_param(IS_FMC_WRITE_FIFO(Init->WriteFifo)); assert_param(IS_FMC_PAGESIZE(Init->PageSize)); assert_param(IS_FMC_NBL_SETUPTIME(Init->NBLSetupTime)); assert_param(IS_FUNCTIONAL_STATE(Init->MaxChipSelectPulse)); /* Disable NORSRAM Device */ __FMC_NORSRAM_DISABLE(Device, Init->NSBank); /* Set NORSRAM device control parameters */ if (Init->MemoryType == FMC_MEMORY_TYPE_NOR) { flashaccess = FMC_NORSRAM_FLASH_ACCESS_ENABLE; } else { flashaccess = FMC_NORSRAM_FLASH_ACCESS_DISABLE; } btcr_reg = (flashaccess | \ Init->DataAddressMux | \ Init->MemoryType | \ Init->MemoryDataWidth | \ Init->BurstAccessMode | \ Init->WaitSignalPolarity | \ Init->WaitSignalActive | \ Init->WriteOperation | \ Init->WaitSignal | \ Init->ExtendedMode | \ Init->AsynchronousWait | \ Init->WriteBurst); btcr_reg |= Init->ContinuousClock; btcr_reg |= Init->WriteFifo; btcr_reg |= Init->NBLSetupTime; btcr_reg |= Init->PageSize; mask = (FMC_BCRx_MBKEN | FMC_BCRx_MUXEN | FMC_BCRx_MTYP | FMC_BCRx_MWID | FMC_BCRx_FACCEN | FMC_BCRx_BURSTEN | FMC_BCRx_WAITPOL | FMC_BCRx_WAITCFG | FMC_BCRx_WREN | FMC_BCRx_WAITEN | FMC_BCRx_EXTMOD | FMC_BCRx_ASYNCWAIT | FMC_BCRx_CBURSTRW); mask |= FMC_BCR1_CCLKEN; mask |= FMC_BCR1_WFDIS; mask |= FMC_BCRx_NBLSET; mask |= FMC_BCRx_CPSIZE; MODIFY_REG(Device->BTCR[Init->NSBank], mask, btcr_reg); /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */ if ((Init->ContinuousClock == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FMC_NORSRAM_BANK1)) { MODIFY_REG(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN, Init->ContinuousClock); } if (Init->NSBank != FMC_NORSRAM_BANK1) { /* Configure Write FIFO mode when Write Fifo is enabled for bank2..4 */ SET_BIT(Device->BTCR[FMC_NORSRAM_BANK1], (uint32_t)(Init->WriteFifo)); } /* Check PSRAM chip select counter state */ if (Init->MaxChipSelectPulse == ENABLE) { /* Check the parameters */ assert_param(IS_FMC_MAX_CHIP_SELECT_PULSE_TIME(Init->MaxChipSelectPulseTime)); /* Configure PSRAM chip select counter value */ MODIFY_REG(Device->PCSCNTR, FMC_PCSCNTR_CSCOUNT, (uint32_t)(Init->MaxChipSelectPulseTime)); /* Enable PSRAM chip select counter for the bank */ switch (Init->NSBank) { case FMC_NORSRAM_BANK1 : SET_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB1EN); break; case FMC_NORSRAM_BANK2 : SET_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB2EN); break; case FMC_NORSRAM_BANK3 : SET_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB3EN); break; default : SET_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB4EN); break; } } return HAL_OK; } /** * @brief DeInitialize the FMC_NORSRAM peripheral * @param Device Pointer to NORSRAM device instance * @param ExDevice Pointer to NORSRAM extended mode device instance * @param Bank NORSRAM bank number * @retval HAL status */ HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank) { /* Check the parameters */ assert_param(IS_FMC_NORSRAM_DEVICE(Device)); assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(ExDevice)); assert_param(IS_FMC_NORSRAM_BANK(Bank)); /* Disable the FMC_NORSRAM device */ __FMC_NORSRAM_DISABLE(Device, Bank); /* De-initialize the FMC_NORSRAM device */ /* FMC_NORSRAM_BANK1 */ if (Bank == FMC_NORSRAM_BANK1) { Device->BTCR[Bank] = 0x000030DBU; } /* FMC_NORSRAM_BANK2, FMC_NORSRAM_BANK3 or FMC_NORSRAM_BANK4 */ else { Device->BTCR[Bank] = 0x000030D2U; } Device->BTCR[Bank + 1U] = 0x0FFFFFFFU; ExDevice->BWTR[Bank] = 0x0FFFFFFFU; /* De-initialize PSRAM chip select counter */ switch (Bank) { case FMC_NORSRAM_BANK1 : CLEAR_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB1EN); break; case FMC_NORSRAM_BANK2 : CLEAR_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB2EN); break; case FMC_NORSRAM_BANK3 : CLEAR_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB3EN); break; default : CLEAR_BIT(Device->PCSCNTR, FMC_PCSCNTR_CNTB4EN); break; } return HAL_OK; } /** * @brief Initialize the FMC_NORSRAM Timing according to the specified * parameters in the FMC_NORSRAM_TimingTypeDef * @param Device Pointer to NORSRAM device instance * @param Timing Pointer to NORSRAM Timing structure * @param Bank NORSRAM bank number * @retval HAL status */ HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank) { uint32_t tmpr; /* Check the parameters */ assert_param(IS_FMC_NORSRAM_DEVICE(Device)); assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); assert_param(IS_FMC_DATAHOLD_DURATION(Timing->DataHoldTime)); assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime)); assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision)); assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency)); assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode)); assert_param(IS_FMC_NORSRAM_BANK(Bank)); /* Set FMC_NORSRAM device timing parameters */ MODIFY_REG(Device->BTCR[Bank + 1U], BTR_CLEAR_MASK, (Timing->AddressSetupTime | ((Timing->AddressHoldTime) << FMC_BTRx_ADDHLD_Pos) | ((Timing->DataSetupTime) << FMC_BTRx_DATAST_Pos) | ((Timing->DataHoldTime) << FMC_BTRx_DATAHLD_Pos) | ((Timing->BusTurnAroundDuration) << FMC_BTRx_BUSTURN_Pos) | (((Timing->CLKDivision) - 1U) << FMC_BTRx_CLKDIV_Pos) | (((Timing->DataLatency) - 2U) << FMC_BTRx_DATLAT_Pos) | (Timing->AccessMode))); /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */ if (HAL_IS_BIT_SET(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN)) { tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1U] & ~((0x0FU) << FMC_BTRx_CLKDIV_Pos)); tmpr |= (uint32_t)(((Timing->CLKDivision) - 1U) << FMC_BTRx_CLKDIV_Pos); MODIFY_REG(Device->BTCR[FMC_NORSRAM_BANK1 + 1U], FMC_BTRx_CLKDIV, tmpr); } return HAL_OK; } /** * @brief Initialize the FMC_NORSRAM Extended mode Timing according to the specified * parameters in the FMC_NORSRAM_TimingTypeDef * @param Device Pointer to NORSRAM device instance * @param Timing Pointer to NORSRAM Timing structure * @param Bank NORSRAM bank number * @param ExtendedMode FMC Extended Mode * This parameter can be one of the following values: * @arg FMC_EXTENDED_MODE_DISABLE * @arg FMC_EXTENDED_MODE_ENABLE * @retval HAL status */ HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode) { /* Check the parameters */ assert_param(IS_FMC_EXTENDED_MODE(ExtendedMode)); /* Set NORSRAM device timing register for write configuration, if extended mode is used */ if (ExtendedMode == FMC_EXTENDED_MODE_ENABLE) { /* Check the parameters */ assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(Device)); assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime)); assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime)); assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime)); assert_param(IS_FMC_DATAHOLD_DURATION(Timing->DataHoldTime)); assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration)); assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode)); assert_param(IS_FMC_NORSRAM_BANK(Bank)); /* Set NORSRAM device timing register for write configuration, if extended mode is used */ MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime | ((Timing->AddressHoldTime) << FMC_BWTRx_ADDHLD_Pos) | ((Timing->DataSetupTime) << FMC_BWTRx_DATAST_Pos) | ((Timing->DataHoldTime) << FMC_BWTRx_DATAHLD_Pos) | Timing->AccessMode | ((Timing->BusTurnAroundDuration) << FMC_BWTRx_BUSTURN_Pos))); } else { Device->BWTR[Bank] = 0x0FFFFFFFU; } return HAL_OK; } /** * @} */ /** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group2 * @brief management functions * @verbatim ============================================================================== ##### FMC_NORSRAM Control functions ##### ============================================================================== [..] This subsection provides a set of functions allowing to control dynamically the FMC NORSRAM interface. @endverbatim * @{ */ /** * @brief Enables dynamically FMC_NORSRAM write operation. * @param Device Pointer to NORSRAM device instance * @param Bank NORSRAM bank number * @retval HAL status */ HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank) { /* Check the parameters */ assert_param(IS_FMC_NORSRAM_DEVICE(Device)); assert_param(IS_FMC_NORSRAM_BANK(Bank)); /* Enable write operation */ SET_BIT(Device->BTCR[Bank], FMC_WRITE_OPERATION_ENABLE); return HAL_OK; } /** * @brief Disables dynamically FMC_NORSRAM write operation. * @param Device Pointer to NORSRAM device instance * @param Bank NORSRAM bank number * @retval HAL status */ HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank) { /* Check the parameters */ assert_param(IS_FMC_NORSRAM_DEVICE(Device)); assert_param(IS_FMC_NORSRAM_BANK(Bank)); /* Disable write operation */ CLEAR_BIT(Device->BTCR[Bank], FMC_WRITE_OPERATION_ENABLE); return HAL_OK; } /** * @} */ /** * @} */ /** @defgroup FMC_LL_Exported_Functions_NAND FMC Low Layer NAND Exported Functions * @brief NAND Controller functions * @verbatim ============================================================================== ##### How to use NAND device driver ##### ============================================================================== [..] This driver contains a set of APIs to interface with the FMC NAND banks in order to run the NAND external devices. (+) FMC NAND bank reset using the function FMC_NAND_DeInit() (+) FMC NAND bank control configuration using the function FMC_NAND_Init() (+) FMC NAND bank common space timing configuration using the function FMC_NAND_CommonSpace_Timing_Init() (+) FMC NAND bank attribute space timing configuration using the function FMC_NAND_AttributeSpace_Timing_Init() (+) FMC NAND bank enable/disable ECC correction feature using the functions FMC_NAND_ECC_Enable()/FMC_NAND_ECC_Disable() (+) FMC NAND bank get ECC correction code using the function FMC_NAND_GetECC() @endverbatim * @{ */ /** @defgroup FMC_LL_NAND_Exported_Functions_Group1 Initialization and de-initialization functions * @brief Initialization and Configuration functions * @verbatim ============================================================================== ##### Initialization and de_initialization functions ##### ============================================================================== [..] This section provides functions allowing to: (+) Initialize and configure the FMC NAND interface (+) De-initialize the FMC NAND interface (+) Configure the FMC clock and associated GPIOs @endverbatim * @{ */ /** * @brief Initializes the FMC_NAND device according to the specified * control parameters in the FMC_NAND_HandleTypeDef * @param Device Pointer to NAND device instance * @param Init Pointer to NAND Initialization structure * @retval HAL status */ HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init) { /* Check the parameters */ assert_param(IS_FMC_NAND_DEVICE(Device)); assert_param(IS_FMC_NAND_BANK(Init->NandBank)); assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature)); assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth)); assert_param(IS_FMC_ECC_STATE(Init->EccComputation)); assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize)); assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime)); assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime)); /* NAND bank 3 registers configuration */ MODIFY_REG(Device->PCR, PCR_CLEAR_MASK, (Init->Waitfeature | FMC_PCR_MEMORY_TYPE_NAND | Init->MemoryDataWidth | Init->EccComputation | Init->ECCPageSize | ((Init->TCLRSetupTime) << FMC_PCR_TCLR_Pos) | ((Init->TARSetupTime) << FMC_PCR_TAR_Pos))); return HAL_OK; } /** * @brief Initializes the FMC_NAND Common space Timing according to the specified * parameters in the FMC_NAND_PCC_TimingTypeDef * @param Device Pointer to NAND device instance * @param Timing Pointer to NAND timing structure * @param Bank NAND bank number * @retval HAL status */ HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) { /* Check the parameters */ assert_param(IS_FMC_NAND_DEVICE(Device)); assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); assert_param(IS_FMC_NAND_BANK(Bank)); /* Prevent unused argument(s) compilation warning if no assert_param check */ UNUSED(Bank); /* NAND bank 3 registers configuration */ MODIFY_REG(Device->PMEM, PMEM_CLEAR_MASK, (Timing->SetupTime | ((Timing->WaitSetupTime) << FMC_PMEM_MEMWAIT_Pos) | ((Timing->HoldSetupTime) << FMC_PMEM_MEMHOLD_Pos) | ((Timing->HiZSetupTime) << FMC_PMEM_MEMHIZ_Pos))); return HAL_OK; } /** * @brief Initializes the FMC_NAND Attribute space Timing according to the specified * parameters in the FMC_NAND_PCC_TimingTypeDef * @param Device Pointer to NAND device instance * @param Timing Pointer to NAND timing structure * @param Bank NAND bank number * @retval HAL status */ HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank) { /* Check the parameters */ assert_param(IS_FMC_NAND_DEVICE(Device)); assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime)); assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime)); assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime)); assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime)); assert_param(IS_FMC_NAND_BANK(Bank)); /* Prevent unused argument(s) compilation warning if no assert_param check */ UNUSED(Bank); /* NAND bank 3 registers configuration */ MODIFY_REG(Device->PATT, PATT_CLEAR_MASK, (Timing->SetupTime | ((Timing->WaitSetupTime) << FMC_PATT_ATTWAIT_Pos) | ((Timing->HoldSetupTime) << FMC_PATT_ATTHOLD_Pos) | ((Timing->HiZSetupTime) << FMC_PATT_ATTHIZ_Pos))); return HAL_OK; } /** * @brief DeInitializes the FMC_NAND device * @param Device Pointer to NAND device instance * @param Bank NAND bank number * @retval HAL status */ HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank) { /* Check the parameters */ assert_param(IS_FMC_NAND_DEVICE(Device)); assert_param(IS_FMC_NAND_BANK(Bank)); /* Disable the NAND Bank */ __FMC_NAND_DISABLE(Device, Bank); /* De-initialize the NAND Bank */ /* Prevent unused argument(s) compilation warning if no assert_param check */ UNUSED(Bank); /* Set the FMC_NAND_BANK3 registers to their reset values */ WRITE_REG(Device->PCR, 0x00000018U); WRITE_REG(Device->SR, 0x00000040U); WRITE_REG(Device->PMEM, 0xFCFCFCFCU); WRITE_REG(Device->PATT, 0xFCFCFCFCU); return HAL_OK; } /** * @} */ /** @defgroup HAL_FMC_NAND_Group2 Peripheral Control functions * @brief management functions * @verbatim ============================================================================== ##### FMC_NAND Control functions ##### ============================================================================== [..] This subsection provides a set of functions allowing to control dynamically the FMC NAND interface. @endverbatim * @{ */ /** * @brief Enables dynamically FMC_NAND ECC feature. * @param Device Pointer to NAND device instance * @param Bank NAND bank number * @retval HAL status */ HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank) { /* Check the parameters */ assert_param(IS_FMC_NAND_DEVICE(Device)); assert_param(IS_FMC_NAND_BANK(Bank)); /* Enable ECC feature */ /* Prevent unused argument(s) compilation warning if no assert_param check */ UNUSED(Bank); SET_BIT(Device->PCR, FMC_PCR_ECCEN); return HAL_OK; } /** * @brief Disables dynamically FMC_NAND ECC feature. * @param Device Pointer to NAND device instance * @param Bank NAND bank number * @retval HAL status */ HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank) { /* Check the parameters */ assert_param(IS_FMC_NAND_DEVICE(Device)); assert_param(IS_FMC_NAND_BANK(Bank)); /* Disable ECC feature */ /* Prevent unused argument(s) compilation warning if no assert_param check */ UNUSED(Bank); CLEAR_BIT(Device->PCR, FMC_PCR_ECCEN); return HAL_OK; } /** * @brief Disables dynamically FMC_NAND ECC feature. * @param Device Pointer to NAND device instance * @param ECCval Pointer to ECC value * @param Bank NAND bank number * @param Timeout Timeout wait value * @retval HAL status */ HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout) { uint32_t tickstart; /* Check the parameters */ assert_param(IS_FMC_NAND_DEVICE(Device)); assert_param(IS_FMC_NAND_BANK(Bank)); /* Get tick */ tickstart = HAL_GetTick(); /* Wait until FIFO is empty */ while (__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET) { /* Check for the Timeout */ if (Timeout != HAL_MAX_DELAY) { if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U)) { return HAL_TIMEOUT; } } } /* Prevent unused argument(s) compilation warning if no assert_param check */ UNUSED(Bank); /* Get the ECCR register value */ *ECCval = (uint32_t)Device->ECCR; return HAL_OK; } /** * @} */ /** * @} */ /** * @} */ #endif /* HAL_NOR_MODULE_ENABLED */ /** * @} */ /** * @} */