/******************************************************************************* * @file * @brief SL Status Codes. ******************************************************************************* * # License * Copyright 2019 Silicon Laboratories Inc. www.silabs.com ******************************************************************************* * * SPDX-License-Identifier: Zlib * * The licensor of this software is Silicon Laboratories Inc. * * This software is provided 'as-is', without any express or implied * warranty. In no event will the authors be held liable for any damages * arising from the use of this software. * * Permission is granted to anyone to use this software for any purpose, * including commercial applications, and to alter it and redistribute it * freely, subject to the following restrictions: * * 1. The origin of this software must not be misrepresented; you must not * claim that you wrote the original software. If you use this software * in a product, an acknowledgment in the product documentation would be * appreciated but is not required. * 2. Altered source versions must be plainly marked as such, and must not be * misrepresented as being the original software. * 3. This notice may not be removed or altered from any source distribution. * ******************************************************************************/ #ifndef SL_STATUS_H #define SL_STATUS_H #include /******************************************************************************* * @addtogroup status Status Codes * @details Status Codes contains error and status code definitions used by GSDK * software components and stacks. This module also provides routines to * read the string linked with the error and status codes. * @{ ******************************************************************************/ // ----------------------------------------------------------------------------- // Space Defines #define SL_STATUS_SPACE_MASK ((sl_status_t)0xFF00) ///< sl status space mask. #define SL_STATUS_GENERIC_SPACE ((sl_status_t)0x0000) ///< sl status generic space. #define SL_STATUS_PLATFORM_1_SPACE ((sl_status_t)0x0100) ///< sl status platform 1 space. #define SL_STATUS_PLATFORM_2_SPACE ((sl_status_t)0x0200) ///< sl status platform 2 space. #define SL_STATUS_HARDWARE_SPACE ((sl_status_t)0x0300) ///< sl status hardware space. #define SL_STATUS_BLUETOOTH_SPACE ((sl_status_t)0x0400) ///< sl status bluetooth space. #define SL_STATUS_BLUETOOTH_MESH_SPACE ((sl_status_t)0x0500) ///< sl status bluetooth mesh space. #define SL_STATUS_CAN_CANOPEN_SPACE ((sl_status_t)0x0600) ///< sl status can canopen space. #define SL_STATUS_CONNECT_SPACE ((sl_status_t)0x0700) ///< sl status connect space. #define SL_STATUS_NET_SUITE_SPACE ((sl_status_t)0x0800) ///< sl status net suite space. #define SL_STATUS_THREAD_SPACE ((sl_status_t)0x0900) ///< sl status thread space. #define SL_STATUS_USB_SPACE ((sl_status_t)0x0A00) ///< sl status usb space. #define SL_STATUS_WIFI_SPACE ((sl_status_t)0x0B00) ///< sl status wifi space. #define SL_STATUS_ZIGBEE_SPACE ((sl_status_t)0x0C00) ///< sl status zigbee space. #define SL_STATUS_Z_WAVE_SPACE ((sl_status_t)0x0D00) ///< sl status z wave space. #define SL_STATUS_GECKO_OS_1_SPACE ((sl_status_t)0x0E00) ///< sl status gecko os 1 space. #define SL_STATUS_GECKO_OS_2_SPACE ((sl_status_t)0x0F00) ///< sl status gecko os 2 space. #define SL_STATUS_BLUETOOTH_CTRL_SPACE ((sl_status_t)0x1000) ///< sl status bluetooth ctrl space. #define SL_STATUS_BLUETOOTH_ATT_SPACE ((sl_status_t)0x1100) ///< sl status bluetooth att space. #define SL_STATUS_BLUETOOTH_SMP_SPACE ((sl_status_t)0x1200) ///< sl status bluetooth mesh foundation space. #define SL_STATUS_BLUETOOTH_MESH_FOUNDATION_SPACE ((sl_status_t)0x1300) ///< sl status bluetooth mesh foundation space. #define SL_STATUS_WISUN_SPACE ((sl_status_t)0x1400) ///< sl status wisun space. #define SL_STATUS_COMPUTE_SPACE ((sl_status_t)0x1500) ///< sl status compute space. // ----------------------------------------------------------------------------- // Status Defines // ----------------------------------------------------------------------------- // Generic Errors #define SL_STATUS_OK ((sl_status_t)0x0000) ///< No error. #define SL_STATUS_FAIL ((sl_status_t)0x0001) ///< Generic error. // State Errors #define SL_STATUS_INVALID_STATE ((sl_status_t)0x0002) ///< Generic invalid state error. #define SL_STATUS_NOT_READY ((sl_status_t)0x0003) ///< Module is not ready for requested operation. #define SL_STATUS_BUSY ((sl_status_t)0x0004) ///< Module is busy and cannot carry out requested operation. #define SL_STATUS_IN_PROGRESS ((sl_status_t)0x0005) ///< Operation is in progress and not yet complete (pass or fail). #define SL_STATUS_ABORT ((sl_status_t)0x0006) ///< Operation aborted. #define SL_STATUS_TIMEOUT ((sl_status_t)0x0007) ///< Operation timed out. #define SL_STATUS_PERMISSION ((sl_status_t)0x0008) ///< Operation not allowed per permissions. #define SL_STATUS_WOULD_BLOCK ((sl_status_t)0x0009) ///< Non-blocking operation would block. #define SL_STATUS_IDLE ((sl_status_t)0x000A) ///< Operation/module is Idle, cannot carry requested operation. #define SL_STATUS_IS_WAITING ((sl_status_t)0x000B) ///< Operation cannot be done while construct is waiting. #define SL_STATUS_NONE_WAITING ((sl_status_t)0x000C) ///< No task/construct waiting/pending for that action/event. #define SL_STATUS_SUSPENDED ((sl_status_t)0x000D) ///< Operation cannot be done while construct is suspended. #define SL_STATUS_NOT_AVAILABLE ((sl_status_t)0x000E) ///< Feature not available due to software configuration. #define SL_STATUS_NOT_SUPPORTED ((sl_status_t)0x000F) ///< Feature not supported. #define SL_STATUS_INITIALIZATION ((sl_status_t)0x0010) ///< Initialization failed. #define SL_STATUS_NOT_INITIALIZED ((sl_status_t)0x0011) ///< Module has not been initialized. #define SL_STATUS_ALREADY_INITIALIZED ((sl_status_t)0x0012) ///< Module has already been initialized. #define SL_STATUS_DELETED ((sl_status_t)0x0013) ///< Object/construct has been deleted. #define SL_STATUS_ISR ((sl_status_t)0x0014) ///< Illegal call from ISR. #define SL_STATUS_NETWORK_UP ((sl_status_t)0x0015) ///< Illegal call because network is up. #define SL_STATUS_NETWORK_DOWN ((sl_status_t)0x0016) ///< Illegal call because network is down. #define SL_STATUS_NOT_JOINED ((sl_status_t)0x0017) ///< Failure due to not being joined in a network. #define SL_STATUS_NO_BEACONS ((sl_status_t)0x0018) ///< Invalid operation as there are no beacons. // Allocation/ownership Errors #define SL_STATUS_ALLOCATION_FAILED ((sl_status_t)0x0019) ///< Generic allocation error. #define SL_STATUS_NO_MORE_RESOURCE ((sl_status_t)0x001A) ///< No more resource available to perform the operation. #define SL_STATUS_EMPTY ((sl_status_t)0x001B) ///< Item/list/queue is empty. #define SL_STATUS_FULL ((sl_status_t)0x001C) ///< Item/list/queue is full. #define SL_STATUS_WOULD_OVERFLOW ((sl_status_t)0x001D) ///< Item would overflow. #define SL_STATUS_HAS_OVERFLOWED ((sl_status_t)0x001E) ///< Item/list/queue has been overflowed. #define SL_STATUS_OWNERSHIP ((sl_status_t)0x001F) ///< Generic ownership error. #define SL_STATUS_IS_OWNER ((sl_status_t)0x0020) ///< Already/still owning resource. // Invalid Parameters Errors #define SL_STATUS_INVALID_PARAMETER ((sl_status_t)0x0021) ///< Generic invalid argument or consequence of invalid argument. #define SL_STATUS_NULL_POINTER ((sl_status_t)0x0022) ///< Invalid null pointer received as argument. #define SL_STATUS_INVALID_CONFIGURATION ((sl_status_t)0x0023) ///< Invalid configuration provided. #define SL_STATUS_INVALID_MODE ((sl_status_t)0x0024) ///< Invalid mode. #define SL_STATUS_INVALID_HANDLE ((sl_status_t)0x0025) ///< Invalid handle. #define SL_STATUS_INVALID_TYPE ((sl_status_t)0x0026) ///< Invalid type for operation. #define SL_STATUS_INVALID_INDEX ((sl_status_t)0x0027) ///< Invalid index. #define SL_STATUS_INVALID_RANGE ((sl_status_t)0x0028) ///< Invalid range. #define SL_STATUS_INVALID_KEY ((sl_status_t)0x0029) ///< Invalid key. #define SL_STATUS_INVALID_CREDENTIALS ((sl_status_t)0x002A) ///< Invalid credentials. #define SL_STATUS_INVALID_COUNT ((sl_status_t)0x002B) ///< Invalid count. #define SL_STATUS_INVALID_SIGNATURE ((sl_status_t)0x002C) ///< Invalid signature / verification failed. #define SL_STATUS_NOT_FOUND ((sl_status_t)0x002D) ///< Item could not be found. #define SL_STATUS_ALREADY_EXISTS ((sl_status_t)0x002E) ///< Item already exists. // IO/Communication Errors #define SL_STATUS_IO ((sl_status_t)0x002F) ///< Generic I/O failure. #define SL_STATUS_IO_TIMEOUT ((sl_status_t)0x0030) ///< I/O failure due to timeout. #define SL_STATUS_TRANSMIT ((sl_status_t)0x0031) ///< Generic transmission error. #define SL_STATUS_TRANSMIT_UNDERFLOW ((sl_status_t)0x0032) ///< Transmit underflowed. #define SL_STATUS_TRANSMIT_INCOMPLETE ((sl_status_t)0x0033) ///< Transmit is incomplete. #define SL_STATUS_TRANSMIT_BUSY ((sl_status_t)0x0034) ///< Transmit is busy. #define SL_STATUS_RECEIVE ((sl_status_t)0x0035) ///< Generic reception error. #define SL_STATUS_OBJECT_READ ((sl_status_t)0x0036) ///< Failed to read on/via given object. #define SL_STATUS_OBJECT_WRITE ((sl_status_t)0x0037) ///< Failed to write on/via given object. #define SL_STATUS_MESSAGE_TOO_LONG ((sl_status_t)0x0038) ///< Message is too long. // EEPROM/Flash Errors #define SL_STATUS_EEPROM_MFG_VERSION_MISMATCH ((sl_status_t)0x0039) ///< EEPROM MFG version mismatch. #define SL_STATUS_EEPROM_STACK_VERSION_MISMATCH ((sl_status_t)0x003A) ///< EEPROM Stack version mismatch. #define SL_STATUS_FLASH_WRITE_INHIBITED ((sl_status_t)0x003B) ///< Flash write is inhibited. #define SL_STATUS_FLASH_VERIFY_FAILED ((sl_status_t)0x003C) ///< Flash verification failed. #define SL_STATUS_FLASH_PROGRAM_FAILED ((sl_status_t)0x003D) ///< Flash programming failed. #define SL_STATUS_FLASH_ERASE_FAILED ((sl_status_t)0x003E) ///< Flash erase failed. // MAC Errors #define SL_STATUS_MAC_NO_DATA ((sl_status_t)0x003F) ///< MAC no data. #define SL_STATUS_MAC_NO_ACK_RECEIVED ((sl_status_t)0x0040) ///< MAC no ACK received. #define SL_STATUS_MAC_INDIRECT_TIMEOUT ((sl_status_t)0x0041) ///< MAC indirect timeout. #define SL_STATUS_MAC_UNKNOWN_HEADER_TYPE ((sl_status_t)0x0042) ///< MAC unknown header type. #define SL_STATUS_MAC_ACK_HEADER_TYPE ((sl_status_t)0x0043) ///< MAC ACK unknown header type. #define SL_STATUS_MAC_COMMAND_TRANSMIT_FAILURE ((sl_status_t)0x0044) ///< MAC command transmit failure. // CLI_STORAGE Errors #define SL_STATUS_CLI_STORAGE_NVM_OPEN_ERROR ((sl_status_t)0x0045) ///< Error in open NVM // Security status codes #define SL_STATUS_SECURITY_IMAGE_CHECKSUM_ERROR ((sl_status_t)0x0046) ///< Image checksum is not valid. #define SL_STATUS_SECURITY_DECRYPT_ERROR ((sl_status_t)0x0047) ///< Decryption failed // Command status codes #define SL_STATUS_COMMAND_IS_INVALID ((sl_status_t)0x0048) ///< Command was not recognized #define SL_STATUS_COMMAND_TOO_LONG ((sl_status_t)0x0049) ///< Command or parameter maximum length exceeded #define SL_STATUS_COMMAND_INCOMPLETE ((sl_status_t)0x004A) ///< Data received does not form a complete command // Misc Errors #define SL_STATUS_BUS_ERROR ((sl_status_t)0x004B) ///< Bus error, e.g. invalid DMA address // Unified MAC Errors #define SL_STATUS_CCA_FAILURE ((sl_status_t)0x004C) ///< CCA failure. // Scan errors #define SL_STATUS_MAC_SCANNING ((sl_status_t)0x004D) ///< MAC scanning. #define SL_STATUS_MAC_INCORRECT_SCAN_TYPE ((sl_status_t)0x004E) ///< MAC incorrect scan type. #define SL_STATUS_INVALID_CHANNEL_MASK ((sl_status_t)0x004F) ///< Invalid channel mask. #define SL_STATUS_BAD_SCAN_DURATION ((sl_status_t)0x0050) ///< Bad scan duration. // Bluetooth status codes #define SL_STATUS_BT_OUT_OF_BONDS ((sl_status_t)0x0402) ///< Bonding procedure can't be started because device has no space left for bond. #define SL_STATUS_BT_UNSPECIFIED ((sl_status_t)0x0403) ///< Unspecified error #define SL_STATUS_BT_HARDWARE ((sl_status_t)0x0404) ///< Hardware failure #define SL_STATUS_BT_NO_BONDING ((sl_status_t)0x0406) ///< The bonding does not exist. #define SL_STATUS_BT_CRYPTO ((sl_status_t)0x0407) ///< Error using crypto functions #define SL_STATUS_BT_DATA_CORRUPTED ((sl_status_t)0x0408) ///< Data was corrupted. #define SL_STATUS_BT_INVALID_SYNC_HANDLE ((sl_status_t)0x040A) ///< Invalid periodic advertising sync handle #define SL_STATUS_BT_INVALID_MODULE_ACTION ((sl_status_t)0x040B) ///< Bluetooth cannot be used on this hardware #define SL_STATUS_BT_RADIO ((sl_status_t)0x040C) ///< Error received from radio #define SL_STATUS_BT_L2CAP_REMOTE_DISCONNECTED ((sl_status_t)0x040D) ///< Returned when remote disconnects the connection-oriented channel by sending disconnection request. #define SL_STATUS_BT_L2CAP_LOCAL_DISCONNECTED ((sl_status_t)0x040E) ///< Returned when local host disconnect the connection-oriented channel by sending disconnection request. #define SL_STATUS_BT_L2CAP_CID_NOT_EXIST ((sl_status_t)0x040F) ///< Returned when local host did not find a connection-oriented channel with given destination CID. #define SL_STATUS_BT_L2CAP_LE_DISCONNECTED ((sl_status_t)0x0410) ///< Returned when connection-oriented channel disconnected due to LE connection is dropped. #define SL_STATUS_BT_L2CAP_FLOW_CONTROL_VIOLATED ((sl_status_t)0x0412) ///< Returned when connection-oriented channel disconnected due to remote end send data even without credit. #define SL_STATUS_BT_L2CAP_FLOW_CONTROL_CREDIT_OVERFLOWED ((sl_status_t)0x0413) ///< Returned when connection-oriented channel disconnected due to remote end send flow control credits exceed 65535. #define SL_STATUS_BT_L2CAP_NO_FLOW_CONTROL_CREDIT ((sl_status_t)0x0414) ///< Returned when connection-oriented channel has run out of flow control credit and local application still trying to send data. #define SL_STATUS_BT_L2CAP_CONNECTION_REQUEST_TIMEOUT ((sl_status_t)0x0415) ///< Returned when connection-oriented channel has not received connection response message within maximum timeout. #define SL_STATUS_BT_L2CAP_INVALID_CID ((sl_status_t)0x0416) ///< Returned when local host received a connection-oriented channel connection response with an invalid destination CID. #define SL_STATUS_BT_L2CAP_WRONG_STATE ((sl_status_t)0x0417) ///< Returned when local host application tries to send a command which is not suitable for L2CAP channel's current state. #define SL_STATUS_BT_PS_STORE_FULL ((sl_status_t)0x041B) ///< Flash reserved for PS store is full #define SL_STATUS_BT_PS_KEY_NOT_FOUND ((sl_status_t)0x041C) ///< PS key not found #define SL_STATUS_BT_APPLICATION_MISMATCHED_OR_INSUFFICIENT_SECURITY ((sl_status_t)0x041D) ///< Mismatched or insufficient security level #define SL_STATUS_BT_APPLICATION_ENCRYPTION_DECRYPTION_ERROR ((sl_status_t)0x041E) ///< Encryption/decryption operation failed. // Bluetooth controller status codes #define SL_STATUS_BT_CTRL_UNKNOWN_CONNECTION_IDENTIFIER ((sl_status_t)0x1002) ///< Connection does not exist, or connection open request was cancelled. #define SL_STATUS_BT_CTRL_AUTHENTICATION_FAILURE ((sl_status_t)0x1005) ///< Pairing or authentication failed due to incorrect results in the pairing or authentication procedure. This could be due to an incorrect PIN or Link Key #define SL_STATUS_BT_CTRL_PIN_OR_KEY_MISSING ((sl_status_t)0x1006) ///< Pairing failed because of missing PIN, or authentication failed because of missing Key #define SL_STATUS_BT_CTRL_MEMORY_CAPACITY_EXCEEDED ((sl_status_t)0x1007) ///< Controller is out of memory. #define SL_STATUS_BT_CTRL_CONNECTION_TIMEOUT ((sl_status_t)0x1008) ///< Link supervision timeout has expired. #define SL_STATUS_BT_CTRL_CONNECTION_LIMIT_EXCEEDED ((sl_status_t)0x1009) ///< Controller is at limit of connections it can support. #define SL_STATUS_BT_CTRL_SYNCHRONOUS_CONNECTION_LIMIT_EXCEEDED ((sl_status_t)0x100A) ///< The Synchronous Connection Limit to a Device Exceeded error code indicates that the Controller has reached the limit to the number of synchronous connections that can be achieved to a device. #define SL_STATUS_BT_CTRL_ACL_CONNECTION_ALREADY_EXISTS ((sl_status_t)0x100B) ///< The ACL Connection Already Exists error code indicates that an attempt to create a new ACL Connection to a device when there is already a connection to this device. #define SL_STATUS_BT_CTRL_COMMAND_DISALLOWED ((sl_status_t)0x100C) ///< Command requested cannot be executed because the Controller is in a state where it cannot process this command at this time. #define SL_STATUS_BT_CTRL_CONNECTION_REJECTED_DUE_TO_LIMITED_RESOURCES ((sl_status_t)0x100D) ///< The Connection Rejected Due To Limited Resources error code indicates that an incoming connection was rejected due to limited resources. #define SL_STATUS_BT_CTRL_CONNECTION_REJECTED_DUE_TO_SECURITY_REASONS ((sl_status_t)0x100E) ///< The Connection Rejected Due To Security Reasons error code indicates that a connection was rejected due to security requirements not being fulfilled, like authentication or pairing. #define SL_STATUS_BT_CTRL_CONNECTION_REJECTED_DUE_TO_UNACCEPTABLE_BD_ADDR ((sl_status_t)0x100F) ///< The Connection was rejected because this device does not accept the BD_ADDR. This may be because the device will only accept connections from specific BD_ADDRs. #define SL_STATUS_BT_CTRL_CONNECTION_ACCEPT_TIMEOUT_EXCEEDED ((sl_status_t)0x1010) ///< The Connection Accept Timeout has been exceeded for this connection attempt. #define SL_STATUS_BT_CTRL_UNSUPPORTED_FEATURE_OR_PARAMETER_VALUE ((sl_status_t)0x1011) ///< A feature or parameter value in the HCI command is not supported. #define SL_STATUS_BT_CTRL_INVALID_COMMAND_PARAMETERS ((sl_status_t)0x1012) ///< Command contained invalid parameters. #define SL_STATUS_BT_CTRL_REMOTE_USER_TERMINATED ((sl_status_t)0x1013) ///< User on the remote device terminated the connection. #define SL_STATUS_BT_CTRL_REMOTE_DEVICE_TERMINATED_CONNECTION_DUE_TO_LOW_RESOURCES ((sl_status_t)0x1014) ///< The remote device terminated the connection because of low resources #define SL_STATUS_BT_CTRL_REMOTE_POWERING_OFF ((sl_status_t)0x1015) ///< Remote Device Terminated Connection due to Power Off #define SL_STATUS_BT_CTRL_CONNECTION_TERMINATED_BY_LOCAL_HOST ((sl_status_t)0x1016) ///< Local device terminated the connection. #define SL_STATUS_BT_CTRL_REPEATED_ATTEMPTS ((sl_status_t)0x1017) ///< The Controller is disallowing an authentication or pairing procedure because too little time has elapsed since the last authentication or pairing attempt failed. #define SL_STATUS_BT_CTRL_PAIRING_NOT_ALLOWED ((sl_status_t)0x1018) ///< The device does not allow pairing. This can be for example, when a device only allows pairing during a certain time window after some user input allows pairing #define SL_STATUS_BT_CTRL_UNSUPPORTED_REMOTE_FEATURE ((sl_status_t)0x101A) ///< The remote device does not support the feature associated with the issued command. #define SL_STATUS_BT_CTRL_UNSPECIFIED_ERROR ((sl_status_t)0x101F) ///< No other error code specified is appropriate to use. #define SL_STATUS_BT_CTRL_LL_RESPONSE_TIMEOUT ((sl_status_t)0x1022) ///< Connection terminated due to link-layer procedure timeout. #define SL_STATUS_BT_CTRL_LL_PROCEDURE_COLLISION ((sl_status_t)0x1023) ///< LL procedure has collided with the same transaction or procedure that is already in progress. #define SL_STATUS_BT_CTRL_ENCRYPTION_MODE_NOT_ACCEPTABLE ((sl_status_t)0x1025) ///< The requested encryption mode is not acceptable at this time. #define SL_STATUS_BT_CTRL_LINK_KEY_CANNOT_BE_CHANGED ((sl_status_t)0x1026) ///< Link key cannot be changed because a fixed unit key is being used. #define SL_STATUS_BT_CTRL_INSTANT_PASSED ((sl_status_t)0x1028) ///< LMP PDU or LL PDU that includes an instant cannot be performed because the instant when this would have occurred has passed. #define SL_STATUS_BT_CTRL_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED ((sl_status_t)0x1029) ///< It was not possible to pair as a unit key was requested and it is not supported. #define SL_STATUS_BT_CTRL_DIFFERENT_TRANSACTION_COLLISION ((sl_status_t)0x102A) ///< LMP transaction was started that collides with an ongoing transaction. #define SL_STATUS_BT_CTRL_CHANNEL_ASSESSMENT_NOT_SUPPORTED ((sl_status_t)0x102E) ///< The Controller cannot perform channel assessment because it is not supported. #define SL_STATUS_BT_CTRL_INSUFFICIENT_SECURITY ((sl_status_t)0x102F) ///< The HCI command or LMP PDU sent is only possible on an encrypted link. #define SL_STATUS_BT_CTRL_PARAMETER_OUT_OF_MANDATORY_RANGE ((sl_status_t)0x1030) ///< A parameter value requested is outside the mandatory range of parameters for the given HCI command or LMP PDU. #define SL_STATUS_BT_CTRL_SIMPLE_PAIRING_NOT_SUPPORTED_BY_HOST ((sl_status_t)0x1037) ///< The IO capabilities request or response was rejected because the sending Host does not support Secure Simple Pairing even though the receiving Link Manager does. #define SL_STATUS_BT_CTRL_HOST_BUSY_PAIRING ((sl_status_t)0x1038) ///< The Host is busy with another pairing operation and unable to support the requested pairing. The receiving device should retry pairing again later. #define SL_STATUS_BT_CTRL_CONNECTION_REJECTED_DUE_TO_NO_SUITABLE_CHANNEL_FOUND ((sl_status_t)0x1039) ///< The Controller could not calculate an appropriate value for the Channel selection operation. #define SL_STATUS_BT_CTRL_CONTROLLER_BUSY ((sl_status_t)0x103A) ///< Operation was rejected because the controller is busy and unable to process the request. #define SL_STATUS_BT_CTRL_UNACCEPTABLE_CONNECTION_INTERVAL ((sl_status_t)0x103B) ///< Remote device terminated the connection because of an unacceptable connection interval. #define SL_STATUS_BT_CTRL_ADVERTISING_TIMEOUT ((sl_status_t)0x103C) ///< Advertising for a fixed duration completed or, for directed advertising, that advertising completed without a connection being created. #define SL_STATUS_BT_CTRL_CONNECTION_TERMINATED_DUE_TO_MIC_FAILURE ((sl_status_t)0x103D) ///< Connection was terminated because the Message Integrity Check (MIC) failed on a received packet. #define SL_STATUS_BT_CTRL_CONNECTION_FAILED_TO_BE_ESTABLISHED ((sl_status_t)0x103E) ///< LL initiated a connection but the connection has failed to be established. Controller did not receive any packets from remote end. #define SL_STATUS_BT_CTRL_MAC_CONNECTION_FAILED ((sl_status_t)0x103F) ///< The MAC of the 802.11 AMP was requested to connect to a peer, but the connection failed. #define SL_STATUS_BT_CTRL_COARSE_CLOCK_ADJUSTMENT_REJECTED_BUT_WILL_TRY_TO_ADJUST_USING_CLOCK_DRAGGING ((sl_status_t)0x1040) ///< The master, at this time, is unable to make a coarse adjustment to the piconet clock, using the supplied parameters. Instead the master will attempt to move the clock using clock dragging. #define SL_STATUS_BT_CTRL_UNKNOWN_ADVERTISING_IDENTIFIER ((sl_status_t)0x1042) ///< A command was sent from the Host that should identify an Advertising or Sync handle, but the Advertising or Sync handle does not exist. #define SL_STATUS_BT_CTRL_LIMIT_REACHED ((sl_status_t)0x1043) ///< Number of operations requested has been reached and has indicated the completion of the activity (e.g., advertising or scanning). #define SL_STATUS_BT_CTRL_OPERATION_CANCELLED_BY_HOST ((sl_status_t)0x1044) ///< A request to the Controller issued by the Host and still pending was successfully canceled. #define SL_STATUS_BT_CTRL_PACKET_TOO_LONG ((sl_status_t)0x1045) ///< An attempt was made to send or receive a packet that exceeds the maximum allowed packet l // Bluetooth attribute status codes #define SL_STATUS_BT_ATT_INVALID_HANDLE ((sl_status_t)0x1101) ///< The attribute handle given was not valid on this server #define SL_STATUS_BT_ATT_READ_NOT_PERMITTED ((sl_status_t)0x1102) ///< The attribute cannot be read #define SL_STATUS_BT_ATT_WRITE_NOT_PERMITTED ((sl_status_t)0x1103) ///< The attribute cannot be written #define SL_STATUS_BT_ATT_INVALID_PDU ((sl_status_t)0x1104) ///< The attribute PDU was invalid #define SL_STATUS_BT_ATT_INSUFFICIENT_AUTHENTICATION ((sl_status_t)0x1105) ///< The attribute requires authentication before it can be read or written. #define SL_STATUS_BT_ATT_REQUEST_NOT_SUPPORTED ((sl_status_t)0x1106) ///< Attribute Server does not support the request received from the client. #define SL_STATUS_BT_ATT_INVALID_OFFSET ((sl_status_t)0x1107) ///< Offset specified was past the end of the attribute #define SL_STATUS_BT_ATT_INSUFFICIENT_AUTHORIZATION ((sl_status_t)0x1108) ///< The attribute requires authorization before it can be read or written. #define SL_STATUS_BT_ATT_PREPARE_QUEUE_FULL ((sl_status_t)0x1109) ///< Too many prepare writes have been queued #define SL_STATUS_BT_ATT_ATT_NOT_FOUND ((sl_status_t)0x110A) ///< No attribute found within the given attribute handle range. #define SL_STATUS_BT_ATT_ATT_NOT_LONG ((sl_status_t)0x110B) ///< The attribute cannot be read or written using the Read Blob Request #define SL_STATUS_BT_ATT_INSUFFICIENT_ENC_KEY_SIZE ((sl_status_t)0x110C) ///< The Encryption Key Size used for encrypting this link is insufficient. #define SL_STATUS_BT_ATT_INVALID_ATT_LENGTH ((sl_status_t)0x110D) ///< The attribute value length is invalid for the operation #define SL_STATUS_BT_ATT_UNLIKELY_ERROR ((sl_status_t)0x110E) ///< The attribute request that was requested has encountered an error that was unlikely, and therefore could not be completed as requested. #define SL_STATUS_BT_ATT_INSUFFICIENT_ENCRYPTION ((sl_status_t)0x110F) ///< The attribute requires encryption before it can be read or written. #define SL_STATUS_BT_ATT_UNSUPPORTED_GROUP_TYPE ((sl_status_t)0x1110) ///< The attribute type is not a supported grouping attribute as defined by a higher layer specification. #define SL_STATUS_BT_ATT_INSUFFICIENT_RESOURCES ((sl_status_t)0x1111) ///< Insufficient Resources to complete the request #define SL_STATUS_BT_ATT_OUT_OF_SYNC ((sl_status_t)0x1112) ///< The server requests the client to rediscover the database. #define SL_STATUS_BT_ATT_VALUE_NOT_ALLOWED ((sl_status_t)0x1113) ///< The attribute parameter value was not allowed. #define SL_STATUS_BT_ATT_APPLICATION ((sl_status_t)0x1180) ///< When this is returned in a BGAPI response, the application tried to read or write the value of a user attribute from the GATT database. #define SL_STATUS_BT_ATT_WRITE_REQUEST_REJECTED ((sl_status_t)0x11FC) ///< The requested write operation cannot be fulfilled for reasons other than permissions. #define SL_STATUS_BT_ATT_CLIENT_CHARACTERISTIC_CONFIGURATION_DESCRIPTOR_IMPROPERLY_CONFIGURED ((sl_status_t)0x11FD) ///< The Client Characteristic Configuration descriptor is not configured according to the requirements of the profile or service. #define SL_STATUS_BT_ATT_PROCEDURE_ALREADY_IN_PROGRESS ((sl_status_t)0x11FE) ///< The profile or service request cannot be serviced because an operation that has been previously triggered is still in progress. #define SL_STATUS_BT_ATT_OUT_OF_RANGE ((sl_status_t)0x11FF) ///< The attribute value is out of range as defined by a profile or service specification. // Bluetooth Security Manager Protocol status codes #define SL_STATUS_BT_SMP_PASSKEY_ENTRY_FAILED ((sl_status_t)0x1201) ///< The user input of passkey failed, for example, the user cancelled the operation #define SL_STATUS_BT_SMP_OOB_NOT_AVAILABLE ((sl_status_t)0x1202) ///< Out of Band data is not available for authentication #define SL_STATUS_BT_SMP_AUTHENTICATION_REQUIREMENTS ((sl_status_t)0x1203) ///< The pairing procedure cannot be performed as authentication requirements cannot be met due to IO capabilities of one or both devices #define SL_STATUS_BT_SMP_CONFIRM_VALUE_FAILED ((sl_status_t)0x1204) ///< The confirm value does not match the calculated compare value #define SL_STATUS_BT_SMP_PAIRING_NOT_SUPPORTED ((sl_status_t)0x1205) ///< Pairing is not supported by the device #define SL_STATUS_BT_SMP_ENCRYPTION_KEY_SIZE ((sl_status_t)0x1206) ///< The resultant encryption key size is insufficient for the security requirements of this device #define SL_STATUS_BT_SMP_COMMAND_NOT_SUPPORTED ((sl_status_t)0x1207) ///< The SMP command received is not supported on this device #define SL_STATUS_BT_SMP_UNSPECIFIED_REASON ((sl_status_t)0x1208) ///< Pairing failed due to an unspecified reason #define SL_STATUS_BT_SMP_REPEATED_ATTEMPTS ((sl_status_t)0x1209) ///< Pairing or authentication procedure is disallowed because too little time has elapsed since last pairing request or security request #define SL_STATUS_BT_SMP_INVALID_PARAMETERS ((sl_status_t)0x120A) ///< The Invalid Parameters error code indicates: the command length is invalid or a parameter is outside of the specified range. #define SL_STATUS_BT_SMP_DHKEY_CHECK_FAILED ((sl_status_t)0x120B) ///< Indicates to the remote device that the DHKey Check value received doesn't match the one calculated by the local device. #define SL_STATUS_BT_SMP_NUMERIC_COMPARISON_FAILED ((sl_status_t)0x120C) ///< Indicates that the confirm values in the numeric comparison protocol do not match. #define SL_STATUS_BT_SMP_BREDR_PAIRING_IN_PROGRESS ((sl_status_t)0x120D) ///< Indicates that the pairing over the LE transport failed due to a Pairing Request sent over the BR/EDR transport in process. #define SL_STATUS_BT_SMP_CROSS_TRANSPORT_KEY_DERIVATION_GENERATION_NOT_ALLOWED ((sl_status_t)0x120E) ///< Indicates that the BR/EDR Link Key generated on the BR/EDR transport cannot be used to derive and distribute keys for the LE transport. #define SL_STATUS_BT_SMP_KEY_REJECTED ((sl_status_t)0x120F) ///< Indicates that the device chose not to accept a distributed key. // Bluetooth Mesh status codes #define SL_STATUS_BT_MESH_ALREADY_EXISTS ((sl_status_t)0x0501) ///< Returned when trying to add a key or some other unique resource with an ID which already exists #define SL_STATUS_BT_MESH_DOES_NOT_EXIST ((sl_status_t)0x0502) ///< Returned when trying to manipulate a key or some other resource with an ID which does not exist #define SL_STATUS_BT_MESH_LIMIT_REACHED ((sl_status_t)0x0503) ///< Returned when an operation cannot be executed because a pre-configured limit for keys, key bindings, elements, models, virtual addresses, provisioned devices, or provisioning sessions is reached #define SL_STATUS_BT_MESH_INVALID_ADDRESS ((sl_status_t)0x0504) ///< Returned when trying to use a reserved address or add a "pre-provisioned" device using an address already used by some other device #define SL_STATUS_BT_MESH_MALFORMED_DATA ((sl_status_t)0x0505) ///< In a BGAPI response, the user supplied malformed data; in a BGAPI event, the remote end responded with malformed or unrecognized data #define SL_STATUS_BT_MESH_ALREADY_INITIALIZED ((sl_status_t)0x0506) ///< An attempt was made to initialize a subsystem that was already initialized. #define SL_STATUS_BT_MESH_NOT_INITIALIZED ((sl_status_t)0x0507) ///< An attempt was made to use a subsystem that wasn't initialized yet. Call the subsystem's init function first. #define SL_STATUS_BT_MESH_NO_FRIEND_OFFER ((sl_status_t)0x0508) ///< Returned when trying to establish a friendship as a Low Power Node, but no acceptable friend offer message was received. #define SL_STATUS_BT_MESH_PROV_LINK_CLOSED ((sl_status_t)0x0509) ///< Provisioning link was unexpectedly closed before provisioning was complete. #define SL_STATUS_BT_MESH_PROV_INVALID_PDU ((sl_status_t)0x050A) ///< An unrecognized provisioning PDU was received. #define SL_STATUS_BT_MESH_PROV_INVALID_PDU_FORMAT ((sl_status_t)0x050B) ///< A provisioning PDU with wrong length or containing field values that are out of bounds was received. #define SL_STATUS_BT_MESH_PROV_UNEXPECTED_PDU ((sl_status_t)0x050C) ///< An unexpected (out of sequence) provisioning PDU was received. #define SL_STATUS_BT_MESH_PROV_CONFIRMATION_FAILED ((sl_status_t)0x050D) ///< The computed confirmation value did not match the expected value. #define SL_STATUS_BT_MESH_PROV_OUT_OF_RESOURCES ((sl_status_t)0x050E) ///< Provisioning could not be continued due to insufficient resources. #define SL_STATUS_BT_MESH_PROV_DECRYPTION_FAILED ((sl_status_t)0x050F) ///< The provisioning data block could not be decrypted. #define SL_STATUS_BT_MESH_PROV_UNEXPECTED_ERROR ((sl_status_t)0x0510) ///< An unexpected error happened during provisioning. #define SL_STATUS_BT_MESH_PROV_CANNOT_ASSIGN_ADDR ((sl_status_t)0x0511) ///< Device could not assign unicast addresses to all of its elements. #define SL_STATUS_BT_MESH_ADDRESS_TEMPORARILY_UNAVAILABLE ((sl_status_t)0x0512) ///< Returned when trying to reuse an address of a previously deleted device before an IV Index Update has been executed. #define SL_STATUS_BT_MESH_ADDRESS_ALREADY_USED ((sl_status_t)0x0513) ///< Returned when trying to assign an address that is used by one of the devices in the Device Database, or by the Provisioner itself. #define SL_STATUS_BT_MESH_PUBLISH_NOT_CONFIGURED ((sl_status_t)0x0514) ///< Application key or publish address are not set #define SL_STATUS_BT_MESH_APP_KEY_NOT_BOUND ((sl_status_t)0x0515) ///< Application key is not bound to a model // Bluetooth Mesh foundation status codes #define SL_STATUS_BT_MESH_FOUNDATION_INVALID_ADDRESS ((sl_status_t)0x1301) ///< Returned when address in request was not valid #define SL_STATUS_BT_MESH_FOUNDATION_INVALID_MODEL ((sl_status_t)0x1302) ///< Returned when model identified is not found for a given element #define SL_STATUS_BT_MESH_FOUNDATION_INVALID_APP_KEY ((sl_status_t)0x1303) ///< Returned when the key identified by AppKeyIndex is not stored in the node #define SL_STATUS_BT_MESH_FOUNDATION_INVALID_NET_KEY ((sl_status_t)0x1304) ///< Returned when the key identified by NetKeyIndex is not stored in the node #define SL_STATUS_BT_MESH_FOUNDATION_INSUFFICIENT_RESOURCES ((sl_status_t)0x1305) ///< Returned when The node cannot serve the request due to insufficient resources #define SL_STATUS_BT_MESH_FOUNDATION_KEY_INDEX_EXISTS ((sl_status_t)0x1306) ///< Returned when the key identified is already stored in the node and the new NetKey value is different #define SL_STATUS_BT_MESH_FOUNDATION_INVALID_PUBLISH_PARAMS ((sl_status_t)0x1307) ///< Returned when the model does not support the publish mechanism #define SL_STATUS_BT_MESH_FOUNDATION_NOT_SUBSCRIBE_MODEL ((sl_status_t)0x1308) ///< Returned when the model does not support the subscribe mechanism #define SL_STATUS_BT_MESH_FOUNDATION_STORAGE_FAILURE ((sl_status_t)0x1309) ///< Returned when storing of the requested parameters failed #define SL_STATUS_BT_MESH_FOUNDATION_NOT_SUPPORTED ((sl_status_t)0x130A) ///< Returned when requested setting is not supported #define SL_STATUS_BT_MESH_FOUNDATION_CANNOT_UPDATE ((sl_status_t)0x130B) ///< Returned when the requested update operation cannot be performed due to general constraints #define SL_STATUS_BT_MESH_FOUNDATION_CANNOT_REMOVE ((sl_status_t)0x130C) ///< Returned when the requested delete operation cannot be performed due to general constraints #define SL_STATUS_BT_MESH_FOUNDATION_CANNOT_BIND ((sl_status_t)0x130D) ///< Returned when the requested bind operation cannot be performed due to general constraints #define SL_STATUS_BT_MESH_FOUNDATION_TEMPORARILY_UNABLE ((sl_status_t)0x130E) ///< Returned when The node cannot start advertising with Node Identity or Proxy since the maximum number of parallel advertising is reached #define SL_STATUS_BT_MESH_FOUNDATION_CANNOT_SET ((sl_status_t)0x130F) ///< Returned when the requested state cannot be set #define SL_STATUS_BT_MESH_FOUNDATION_UNSPECIFIED ((sl_status_t)0x1310) ///< Returned when an unspecified error took place #define SL_STATUS_BT_MESH_FOUNDATION_INVALID_BINDING ((sl_status_t)0x1311) ///< Returned when the NetKeyIndex and AppKeyIndex combination is not valid for a Config AppKey Update // ----------------------------------------------------------------------------- // Wi-Fi Errors #define SL_STATUS_WIFI_INVALID_KEY ((sl_status_t)0x0B01) ///< Invalid firmware keyset #define SL_STATUS_WIFI_FIRMWARE_DOWNLOAD_TIMEOUT ((sl_status_t)0x0B02) ///< The firmware download took too long #define SL_STATUS_WIFI_UNSUPPORTED_MESSAGE_ID ((sl_status_t)0x0B03) ///< Unknown request ID or wrong interface ID used #define SL_STATUS_WIFI_WARNING ((sl_status_t)0x0B04) ///< The request is successful but some parameters have been ignored #define SL_STATUS_WIFI_NO_PACKET_TO_RECEIVE ((sl_status_t)0x0B05) ///< No Packets waiting to be received #define SL_STATUS_WIFI_SLEEP_GRANTED ((sl_status_t)0x0B08) ///< The sleep mode is granted #define SL_STATUS_WIFI_SLEEP_NOT_GRANTED ((sl_status_t)0x0B09) ///< The WFx does not go back to sleep #define SL_STATUS_WIFI_SECURE_LINK_MAC_KEY_ERROR ((sl_status_t)0x0B10) ///< The SecureLink MAC key was not found #define SL_STATUS_WIFI_SECURE_LINK_MAC_KEY_ALREADY_BURNED ((sl_status_t)0x0B11) ///< The SecureLink MAC key is already installed in OTP #define SL_STATUS_WIFI_SECURE_LINK_RAM_MODE_NOT_ALLOWED ((sl_status_t)0x0B12) ///< The SecureLink MAC key cannot be installed in RAM #define SL_STATUS_WIFI_SECURE_LINK_FAILED_UNKNOWN_MODE ((sl_status_t)0x0B13) ///< The SecureLink MAC key installation failed #define SL_STATUS_WIFI_SECURE_LINK_EXCHANGE_FAILED ((sl_status_t)0x0B14) ///< SecureLink key (re)negotiation failed #define SL_STATUS_WIFI_WRONG_STATE ((sl_status_t)0x0B18) ///< The device is in an inappropriate state to perform the request #define SL_STATUS_WIFI_CHANNEL_NOT_ALLOWED ((sl_status_t)0x0B19) ///< The request failed due to regulatory limitations #define SL_STATUS_WIFI_NO_MATCHING_AP ((sl_status_t)0x0B1A) ///< The connection request failed because no suitable AP was found #define SL_STATUS_WIFI_CONNECTION_ABORTED ((sl_status_t)0x0B1B) ///< The connection request was aborted by host #define SL_STATUS_WIFI_CONNECTION_TIMEOUT ((sl_status_t)0x0B1C) ///< The connection request failed because of a timeout #define SL_STATUS_WIFI_CONNECTION_REJECTED_BY_AP ((sl_status_t)0x0B1D) ///< The connection request failed because the AP rejected the device #define SL_STATUS_WIFI_CONNECTION_AUTH_FAILURE ((sl_status_t)0x0B1E) ///< The connection request failed because the WPA handshake did not complete successfully #define SL_STATUS_WIFI_RETRY_EXCEEDED ((sl_status_t)0x0B1F) ///< The request failed because the retry limit was exceeded #define SL_STATUS_WIFI_TX_LIFETIME_EXCEEDED ((sl_status_t)0x0B20) ///< The request failed because the MSDU life time was exceeded // ----------------------------------------------------------------------------- // MVP Driver and MVP Math status codes #define SL_STATUS_COMPUTE_DRIVER_FAULT ((sl_status_t)0x1501) ///< Critical fault #define SL_STATUS_COMPUTE_DRIVER_ALU_NAN ((sl_status_t)0x1502) ///< ALU operation output NaN #define SL_STATUS_COMPUTE_DRIVER_ALU_OVERFLOW ((sl_status_t)0x1503) ///< ALU numeric overflow #define SL_STATUS_COMPUTE_DRIVER_ALU_UNDERFLOW ((sl_status_t)0x1504) ///< ALU numeric underflow #define SL_STATUS_COMPUTE_DRIVER_STORE_CONVERSION_OVERFLOW ((sl_status_t)0x1505) ///< Overflow during array store #define SL_STATUS_COMPUTE_DRIVER_STORE_CONVERSION_UNDERFLOW ((sl_status_t)0x1506) ///< Underflow during array store conversion #define SL_STATUS_COMPUTE_DRIVER_STORE_CONVERSION_INFINITY ((sl_status_t)0x1507) ///< Infinity encountered during array store conversion #define SL_STATUS_COMPUTE_DRIVER_STORE_CONVERSION_NAN ((sl_status_t)0x1508) ///< NaN encountered during array store conversion #define SL_STATUS_COMPUTE_MATH_NAN ((sl_status_t)0x1512) ///< MATH NaN encountered #define SL_STATUS_COMPUTE_MATH_INFINITY ((sl_status_t)0x1513) ///< MATH Infinity encountered #define SL_STATUS_COMPUTE_MATH_OVERFLOW ((sl_status_t)0x1514) ///< MATH numeric overflow #define SL_STATUS_COMPUTE_MATH_UNDERFLOW ((sl_status_t)0x1515) ///< MATH numeric underflow // ----------------------------------------------------------------------------- // Data Types /** @brief define global status variable. */ typedef uint32_t sl_status_t; // ----------------------------------------------------------------------------- // Functions #ifdef __cplusplus extern "C" { #endif /******************************************************************************************************** * sl_status_get_string_n() * * @brief Get a copy of the status string associated to the status code passed, up to * 'buffer_length' length, if the string associated to the status code is enabled. If not, * the error code number, in hex, prefixed by "SL_STATUS_" will be copied in the buffer * instead. * For example, the buffer would either contain "SL_STATUS_FAIL" if that status string is * enabled, or "SL_STATUS_0x0001" if the string is disabled, as SL_STATUS_FAIL's * value is 0x0001. * * @param status The status code from which to obtain the status string. * * @param buffer Pointer to a buffer in which the status string will be copied. A terminating * null-character will be appended after the copied status string. * * @param buffer_length Maximum number of characters that can be written in the buffer, including the * terminating null-character. If the status string would be longer than the * available length, it will be truncated and a null-terminating character will * be the last character contained in the buffer. * * @return The number of characters that would have been written if the buffer_length had been * sufficiently large, not counting the terminating null character. * If the status code is invalid, 0 or a negative number is returned. * Notice that only when this returned value is strictly positive and less than * buffer_length, the status string has been completely written in the buffer. *******************************************************************************************************/ int32_t sl_status_get_string_n(sl_status_t status, char *buffer, uint32_t buffer_length); /******************************************************************************************************** * sl_status_print() * * @brief Print, through printf, the string associated to the passed status code. If the string * associated to the status code is enabled, the status string will be printed, for example * "SL_STATUS_OK". If the string associated to the status code is disabled, the status number, * in hex, prefixed by "SL_STATUS_" will be printed instead, for example "SL_STATUS_0x0000", * as SL_STATUS_OK's value is 0x0000. * * @param status The status code of which to print the status string. *******************************************************************************************************/ void sl_status_print(sl_status_t status); #ifdef __cplusplus } #endif /** @} (end addtogroup status) */ #endif /* SL_STATUS_H */