/*
 * Copyright 2023-2024 NXP
 * All rights reserved.
 *
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#ifndef FSL_IOPCTL_H_
#define FSL_IOPCTL_H_

#include "fsl_common.h"

/*!
 * @addtogroup iopctl_driver
 * @{
 */

/*! @file */

/*******************************************************************************
 * Definitions
 ******************************************************************************/

/* Component ID definition, used by tools. */
#ifndef FSL_COMPONENT_ID
#define FSL_COMPONENT_ID "platform.drivers.lpc_iopctl"
#endif

/*! @name Driver version */
/*@{*/
/*! @brief IOPCTL driver version 2.0.2. */
#define LPC_IOPCTL_DRIVER_VERSION (MAKE_VERSION(2, 0, 2))
/*@}*/

/**
 * @brief Array of IOPCTL pin definitions passed to IOPCTL_SetPinMuxing() must be in this format
 */
typedef struct _iopctl_group
{
    uint32_t port : 8;      /* Pin port */
    uint32_t pin : 32;      /* Pin number */
    uint32_t modefunc : 12; /* Function and mode */
} iopctl_group_t;

/**
 * @brief IOPCTL function and mode selection definitions
 * @note See the User Manual for specific modes and functions supported by the various pins.
 */
#define IOPCTL_FUNC0        0x0         /*!< Selects pin function 0 */
#define IOPCTL_FUNC1        0x1         /*!< Selects pin function 1 */
#define IOPCTL_FUNC2        0x2         /*!< Selects pin function 2 */
#define IOPCTL_FUNC3        0x3         /*!< Selects pin function 3 */
#define IOPCTL_FUNC4        0x4         /*!< Selects pin function 4 */
#define IOPCTL_FUNC5        0x5         /*!< Selects pin function 5 */
#define IOPCTL_FUNC6        0x6         /*!< Selects pin function 6 */
#define IOPCTL_FUNC7        0x7         /*!< Selects pin function 7 */
#define IOPCTL_FUNC8        0x8         /*!< Selects pin function 8 */
#define IOPCTL_FUNC9        0x9         /*!< Selects pin function 9 */
#define IOPCTL_FUNC10       0xA         /*!< Selects pin function 10 */
#define IOPCTL_FUNC11       0xB         /*!< Selects pin function 11 */
#define IOPCTL_FUNC12       0xC         /*!< Selects pin function 12 */
#define IOPCTL_FUNC13       0xD         /*!< Selects pin function 13 */
#define IOPCTL_FUNC14       0xE         /*!< Selects pin function 14 */
#define IOPCTL_FUNC15       0xF         /*!< Selects pin function 15 */
#define IOPCTL_PUPD_EN      (0x1 << 4)  /*!< Enables Pullup / Pulldown */
#define IOPCTL_PULLDOWN_EN  (0x0 << 5)  /*!< Selects pull-down function */
#define IOPCTL_PULLUP_EN    (0x1 << 5)  /*!< Selects pull-up function */
#define IOPCTL_INBUF_EN     (0x1 << 6)  /*!< Enables buffer function  on input */
#define IOPCTL_SLEW_RATE    (0x0 << 7)  /*!< Slew Rate Control */
#define IOPCTL_ANAMUX_EN    (0x1 << 9)  /*!< Enables analog mux function by setting 0 to bit 7 */
#define IOPCTL_PSEDRAIN_EN  (0x1 << 10) /*!< Enables pseudo output drain function */
#define IOPCTL_INV_EN       (0x1 << 11) /*!< Enables invert function on input */
#define IOPCTL_DRIVE_100OHM (0x0 << 12) /*!< Selects transmitter current drive 100ohm */
#define IOPCTL_DRIVE_66OHM  (0x1 << 12) /*!< Selects transmitter current drive 66ohm */
#define IOPCTL_DRIVE_50OHM  (0x2 << 12) /*!< Selects transmitter current drive 50ohm */
#define IOPCTL_DRIVE_33OHM  (0x3 << 12) /*!< Selects transmitter current drive 33ohm */

#if defined(__cplusplus)
extern "C" {
#endif

/**
 * @brief   Sets I/O Pad Control pin mux
 * @param   port        : Port to mux
 * @param   pin         : Pin to mux
 * @param   modefunc    : OR'ed values of type IOPCTL_*
 * @return  Nothing
 */
__STATIC_INLINE void IOPCTL_PinMuxSet(uint8_t port, uint8_t pin, uint32_t modefunc)
{
    uint32_t pioBase = 0U;

    if (port >= 8U) /* IOPCTL_VDD1 */
    {
        pioBase = (uint32_t)IOPCTL1 + (uint32_t)((port - 8U) * 32U + pin) * 4UL;
    }
    else if (port >= 4U) /* IOPCTL_VDDN */
    {
        pioBase = (uint32_t)IOPCTL2 + (uint32_t)((port - 4U) * 32U + pin) * 4UL;
    }
    else /* IOPCTL_VDD2 */
    {
#if defined(MIMXRT798S_hifi1_SERIES) || defined(MIMXRT798S_cm33_core1_SERIES) || defined(MIMXRT758S_hifi1_SERIES) || \
    defined(MIMXRT758S_cm33_core1_SERIES) || defined(MIMXRT735S_hifi1_SERIES) || defined(MIMXRT735S_cm33_core1_SERIES)
        assert(false);
#else
        pioBase = (uint32_t)IOPCTL0 + (uint32_t)(port * 32U + pin) * 4UL;
#endif
    }

    *((volatile uint32_t *)pioBase) = modefunc;
}

/**
 * @brief   Set all I/O Control pin muxing
 * @param   pinArray    : Pointer to array of pin mux selections
 * @param   arrayLength : Number of entries in pinArray
 * @return  Nothing
 */
__STATIC_INLINE void IOPCTL_SetPinMuxing(const iopctl_group_t *pinArray, uint32_t arrayLength)
{
    uint32_t i;

    for (i = 0U; i < arrayLength; i++)
    {
        IOPCTL_PinMuxSet(pinArray[i].port, pinArray[i].pin, pinArray[i].modefunc);
    }
}

/* @} */

#if defined(__cplusplus)
}
#endif

#endif /* FSL_IOPCTL_H_ */