//***************************************************************************** // MIMXRT685S_cm33 startup code for use with MCUXpresso IDE // // Version : 101121 //***************************************************************************** // // Copyright 2016-2021 NXP // All rights reserved. // // SPDX-License-Identifier: BSD-3-Clause //***************************************************************************** #if defined (DEBUG) #pragma GCC push_options #pragma GCC optimize ("Og") #endif // (DEBUG) #if defined (__cplusplus) #ifdef __REDLIB__ #error Redlib does not support C++ #else //***************************************************************************** // // The entry point for the C++ library startup // //***************************************************************************** extern "C" { extern void __libc_init_array(void); } #endif #endif #define WEAK __attribute__ ((weak)) #define WEAK_AV __attribute__ ((weak, section(".after_vectors"))) #define ALIAS(f) __attribute__ ((weak, alias (#f))) //***************************************************************************** #if defined (__cplusplus) extern "C" { #endif //***************************************************************************** // Variable to store CRP value in. Will be placed automatically // by the linker when "Enable Code Read Protect" selected. // See crp.h header for more information //***************************************************************************** //***************************************************************************** // Declaration of external SystemInit function //***************************************************************************** #if defined (__USE_CMSIS) extern void SystemInit(void); #endif // (__USE_CMSIS) //***************************************************************************** // Forward declaration of the core exception handlers. // When the application defines a handler (with the same name), this will // automatically take precedence over these weak definitions. // If your application is a C++ one, then any interrupt handlers defined // in C++ files within in your main application will need to have C linkage // rather than C++ linkage. To do this, make sure that you are using extern "C" // { .... } around the interrupt handler within your main application code. //***************************************************************************** void ResetISR(void); WEAK void NMI_Handler(void); WEAK void HardFault_Handler(void); WEAK void MemManage_Handler(void); WEAK void BusFault_Handler(void); WEAK void UsageFault_Handler(void); WEAK void SecureFault_Handler(void); WEAK void SVC_Handler(void); WEAK void DebugMon_Handler(void); WEAK void PendSV_Handler(void); WEAK void SysTick_Handler(void); WEAK void IntDefaultHandler(void); //***************************************************************************** // Forward declaration of the application IRQ handlers. When the application // defines a handler (with the same name), this will automatically take // precedence over weak definitions below //***************************************************************************** WEAK void WDT0_IRQHandler(void); WEAK void DMA0_IRQHandler(void); WEAK void GPIO_INTA_IRQHandler(void); WEAK void GPIO_INTB_IRQHandler(void); WEAK void PIN_INT0_IRQHandler(void); WEAK void PIN_INT1_IRQHandler(void); WEAK void PIN_INT2_IRQHandler(void); WEAK void PIN_INT3_IRQHandler(void); WEAK void UTICK0_IRQHandler(void); WEAK void MRT0_IRQHandler(void); WEAK void CTIMER0_IRQHandler(void); WEAK void CTIMER1_IRQHandler(void); WEAK void SCT0_IRQHandler(void); WEAK void CTIMER3_IRQHandler(void); WEAK void FLEXCOMM0_IRQHandler(void); WEAK void FLEXCOMM1_IRQHandler(void); WEAK void FLEXCOMM2_IRQHandler(void); WEAK void FLEXCOMM3_IRQHandler(void); WEAK void FLEXCOMM4_IRQHandler(void); WEAK void FLEXCOMM5_IRQHandler(void); WEAK void FLEXCOMM14_IRQHandler(void); WEAK void FLEXCOMM15_IRQHandler(void); WEAK void ADC0_IRQHandler(void); WEAK void Reserved39_IRQHandler(void); WEAK void ACMP_IRQHandler(void); WEAK void DMIC0_IRQHandler(void); WEAK void Reserved42_IRQHandler(void); WEAK void HYPERVISOR_IRQHandler(void); WEAK void SECUREVIOLATION_IRQHandler(void); WEAK void HWVAD0_IRQHandler(void); WEAK void Reserved46_IRQHandler(void); WEAK void RNG_IRQHandler(void); WEAK void RTC_IRQHandler(void); WEAK void DSPWAKE_IRQHandler(void); WEAK void MU_A_IRQHandler(void); WEAK void PIN_INT4_IRQHandler(void); WEAK void PIN_INT5_IRQHandler(void); WEAK void PIN_INT6_IRQHandler(void); WEAK void PIN_INT7_IRQHandler(void); WEAK void CTIMER2_IRQHandler(void); WEAK void CTIMER4_IRQHandler(void); WEAK void OS_EVENT_IRQHandler(void); WEAK void FLEXSPI_IRQHandler(void); WEAK void FLEXCOMM6_IRQHandler(void); WEAK void FLEXCOMM7_IRQHandler(void); WEAK void USDHC0_IRQHandler(void); WEAK void USDHC1_IRQHandler(void); WEAK void SGPIO_INTA_IRQHandler(void); WEAK void SGPIO_INTB_IRQHandler(void); WEAK void I3C0_IRQHandler(void); WEAK void USB_IRQHandler(void); WEAK void USB_WAKEUP_IRQHandler(void); WEAK void WDT1_IRQHandler(void); WEAK void USBPHY_DCD_IRQHandler(void); WEAK void DMA1_IRQHandler(void); WEAK void PUF_IRQHandler(void); WEAK void POWERQUAD_IRQHandler(void); WEAK void CASPER_IRQHandler(void); WEAK void PMC_PMIC_IRQHandler(void); WEAK void HASHCRYPT_IRQHandler(void); //***************************************************************************** // Forward declaration of the driver IRQ handlers. These are aliased // to the IntDefaultHandler, which is a 'forever' loop. When the driver // defines a handler (with the same name), this will automatically take // precedence over these weak definitions //***************************************************************************** void WDT0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void GPIO_INTA_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void GPIO_INTB_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PIN_INT0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PIN_INT1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PIN_INT2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PIN_INT3_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void UTICK0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void MRT0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void CTIMER0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void CTIMER1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void SCT0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void CTIMER3_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXCOMM0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXCOMM1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXCOMM2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXCOMM3_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXCOMM4_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXCOMM5_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXCOMM14_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXCOMM15_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void ADC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void Reserved39_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void ACMP_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMIC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void Reserved42_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void HYPERVISOR_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void SECUREVIOLATION_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void HWVAD0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void Reserved46_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void RNG_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void RTC_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DSPWAKE_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void MU_A_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PIN_INT4_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PIN_INT5_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PIN_INT6_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PIN_INT7_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void CTIMER2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void CTIMER4_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void OS_EVENT_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXSPI_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXCOMM6_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXCOMM7_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void USDHC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void USDHC1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void SGPIO_INTA_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void SGPIO_INTB_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void I3C0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void USB_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void USB_WAKEUP_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void WDT1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void USBPHY_DCD_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PUF_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void POWERQUAD_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void CASPER_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PMC_PMIC_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void HASHCRYPT_DriverIRQHandler(void) ALIAS(IntDefaultHandler); //***************************************************************************** // The entry point for the application. // __main() is the entry point for Redlib based applications // main() is the entry point for Newlib based applications //***************************************************************************** #if defined (__REDLIB__) extern void __main(void); #endif extern int main(void); //***************************************************************************** // External declaration for the pointer to the stack top from the Linker Script //***************************************************************************** extern void _vStackTop(void); extern void _image_size(void); //***************************************************************************** // External declaration for the pointer to the stack base from the Linker Script //***************************************************************************** extern void _vStackBase(void); //***************************************************************************** // External declaration for image type and load address from Linker Script //***************************************************************************** WEAK extern void __imghdr_loadaddress(); WEAK extern void __imghdr_imagetype(); //***************************************************************************** #if defined (__cplusplus) } // extern "C" #endif //***************************************************************************** // The vector table. // This relies on the linker script to place at correct location in memory. //***************************************************************************** extern void (* const g_pfnVectors[])(void); extern void * __Vectors __attribute__ ((alias ("g_pfnVectors"))); __attribute__ ((used, section(".isr_vector"))) void (* const g_pfnVectors[])(void) = { // Core Level - CM33 &_vStackTop, // The initial stack pointer ResetISR, // The reset handler NMI_Handler, // The NMI handler HardFault_Handler, // The hard fault handler MemManage_Handler, // The MPU fault handler BusFault_Handler, // The bus fault handler UsageFault_Handler, // The usage fault handler SecureFault_Handler, // The secure fault handler #if (defined(__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE & 0x2)) (void (*)())0x180000, // Image length #else (void (*)())((unsigned)_image_size), // Image length #endif __imghdr_imagetype, // Image type 0, // Reserved SVC_Handler, // SVCall handler DebugMon_Handler, // Debug monitor handler (void (*)())g_pfnVectors, // Image load address PendSV_Handler, // The PendSV handler SysTick_Handler, // The SysTick handler // Chip Level - MIMXRT685S_cm33 WDT0_IRQHandler, // 16: Windowed watchdog timer 0 (CM33 watchdog) DMA0_IRQHandler, // 17: DMA controller 0 (secure or CM33 DMA) GPIO_INTA_IRQHandler, // 18: GPIO interrupt A GPIO_INTB_IRQHandler, // 19: GPIO interrupt B PIN_INT0_IRQHandler, // 20: Pin interrupt 0 or pattern match engine slice 0 int PIN_INT1_IRQHandler, // 21: Pin interrupt 1 or pattern match engine slice 1 int PIN_INT2_IRQHandler, // 22: Pin interrupt 2 or pattern match engine slice 2 int PIN_INT3_IRQHandler, // 23: Pin interrupt 3 or pattern match engine slice 3 int UTICK0_IRQHandler, // 24: Micro-tick Timer MRT0_IRQHandler, // 25: Multi-Rate Timer CTIMER0_IRQHandler, // 26: Standard counter/timer CTIMER0 CTIMER1_IRQHandler, // 27: Standard counter/timer CTIMER1 SCT0_IRQHandler, // 28: SCTimer/PWM CTIMER3_IRQHandler, // 29: Standard counter/timer CTIMER3 FLEXCOMM0_IRQHandler, // 30: Flexcomm Interface 0 (USART, SPI, I2C, I2S) FLEXCOMM1_IRQHandler, // 31: Flexcomm Interface 1 (USART, SPI, I2C, I2S) FLEXCOMM2_IRQHandler, // 32: Flexcomm Interface 2 (USART, SPI, I2C, I2S) FLEXCOMM3_IRQHandler, // 33: Flexcomm Interface 3 (USART, SPI, I2C, I2S) FLEXCOMM4_IRQHandler, // 34: Flexcomm Interface 4 (USART, SPI, I2C, I2S) FLEXCOMM5_IRQHandler, // 35: Flexcomm Interface 5 (USART, SPI, I2C, I2S) FLEXCOMM14_IRQHandler, // 36: Flexcomm Interface 14 (SPI only) FLEXCOMM15_IRQHandler, // 37: Flexcomm Interface 15 (I2C only) ADC0_IRQHandler, // 38: ADC0 Reserved39_IRQHandler, // 39: Reserved interrupt ACMP_IRQHandler, // 40: Analog comparator DMIC0_IRQHandler, // 41: Digital microphone and DMIC subsystem Reserved42_IRQHandler, // 42: Reserved interrupt HYPERVISOR_IRQHandler, // 43: Hypervisor SECUREVIOLATION_IRQHandler, // 44: Secure violation HWVAD0_IRQHandler, // 45: Hardware Voice Activity Detector Reserved46_IRQHandler, // 46: Reserved interrupt RNG_IRQHandler, // 47: Random number Generator RTC_IRQHandler, // 48: RTC alarm and wake-up DSPWAKE_IRQHandler, // 49: Wake-up from DSP MU_A_IRQHandler, // 50: Messaging Unit port A for CM33 PIN_INT4_IRQHandler, // 51: Pin interrupt 4 or pattern match engine slice 4 int PIN_INT5_IRQHandler, // 52: Pin interrupt 5 or pattern match engine slice 5 int PIN_INT6_IRQHandler, // 53: Pin interrupt 6 or pattern match engine slice 6 int PIN_INT7_IRQHandler, // 54: Pin interrupt 7 or pattern match engine slice 7 int CTIMER2_IRQHandler, // 55: Standard counter/timer CTIMER2 CTIMER4_IRQHandler, // 56: Standard counter/timer CTIMER4 OS_EVENT_IRQHandler, // 57: OS event timer FLEXSPI_IRQHandler, // 58: FLEXSPI interface FLEXCOMM6_IRQHandler, // 59: Flexcomm Interface 6 (USART, SPI, I2C, I2S) FLEXCOMM7_IRQHandler, // 60: Flexcomm Interface 7 (USART, SPI, I2C, I2S) USDHC0_IRQHandler, // 61: USDHC0 (Enhanced SDHC) interrupt request USDHC1_IRQHandler, // 62: USDHC1 (Enhanced SDHC) interrupt request SGPIO_INTA_IRQHandler, // 63: Secure GPIO interrupt A SGPIO_INTB_IRQHandler, // 64: Secure GPIO interrupt B I3C0_IRQHandler, // 65: I3C interface 0 USB_IRQHandler, // 66: High-speed USB device/host USB_WAKEUP_IRQHandler, // 67: USB Activity Wake-up Interrupt WDT1_IRQHandler, // 68: Windowed watchdog timer 1 (HiFi 4 watchdog) USBPHY_DCD_IRQHandler, // 69: USBPHY DCD DMA1_IRQHandler, // 70: DMA controller 1 (non-secure or HiFi 4 DMA) PUF_IRQHandler, // 71: Physical Unclonable Function POWERQUAD_IRQHandler, // 72: PowerQuad math coprocessor CASPER_IRQHandler, // 73: Casper cryptographic coprocessor PMC_PMIC_IRQHandler, // 74: Power management IC HASHCRYPT_IRQHandler, // 75: Hash-AES unit }; /* End of g_pfnVectors */ #if defined(ENABLE_RAM_VECTOR_TABLE) extern void * __VECTOR_TABLE __attribute__ ((alias ("g_pfnVectors"))); void (* __VECTOR_RAM[sizeof(g_pfnVectors) / 4])(void) __attribute__((aligned(128))); unsigned int __RAM_VECTOR_TABLE_SIZE_BYTES = sizeof(g_pfnVectors); #endif //***************************************************************************** // Functions to carry out the initialization of RW and BSS data sections. These // are written as separate functions rather than being inlined within the // ResetISR() function in order to cope with MCUs with multiple banks of // memory. //***************************************************************************** __attribute__ ((section(".after_vectors.init_data"))) void data_init(unsigned int romstart, unsigned int start, unsigned int len) { unsigned int *pulDest = (unsigned int*) start; unsigned int *pulSrc = (unsigned int*) romstart; unsigned int loop; for (loop = 0; loop < len; loop = loop + 4) *pulDest++ = *pulSrc++; } __attribute__ ((section(".after_vectors.init_bss"))) void bss_init(unsigned int start, unsigned int len) { unsigned int *pulDest = (unsigned int*) start; unsigned int loop; for (loop = 0; loop < len; loop = loop + 4) *pulDest++ = 0; } //***************************************************************************** // The following symbols are constructs generated by the linker, indicating // the location of various points in the "Global Section Table". This table is // created by the linker via the Code Red managed linker script mechanism. It // contains the load address, execution address and length of each RW data // section and the execution and length of each BSS (zero initialized) section. //***************************************************************************** extern unsigned int __data_section_table; extern unsigned int __data_section_table_end; extern unsigned int __bss_section_table; extern unsigned int __bss_section_table_end; //***************************************************************************** // Reset entry point for your code. // Sets up a simple runtime environment and initializes the C/C++ // library. //***************************************************************************** __attribute__ ((naked, section(".after_vectors.reset"))) void ResetISR(void) { // Disable interrupts __asm volatile ("cpsid i"); // Config VTOR & MSPLIM register __asm volatile ("LDR R0, =0xE000ED08 \n" "STR %0, [R0] \n" "LDR R1, [%0] \n" "MSR MSP, R1 \n" "MSR MSPLIM, %1 \n" : : "r"(g_pfnVectors), "r"(_vStackBase) : "r0", "r1"); #if defined (__USE_CMSIS) // If __USE_CMSIS defined, then call CMSIS SystemInit code SystemInit(); #endif // (__USE_CMSIS) // // Copy the data sections from flash to SRAM. // unsigned int LoadAddr, ExeAddr, SectionLen; unsigned int *SectionTableAddr; // Load base address of Global Section Table SectionTableAddr = &__data_section_table; // Copy the data sections from flash to SRAM. while (SectionTableAddr < &__data_section_table_end) { LoadAddr = *SectionTableAddr++; ExeAddr = *SectionTableAddr++; SectionLen = *SectionTableAddr++; data_init(LoadAddr, ExeAddr, SectionLen); } // At this point, SectionTableAddr = &__bss_section_table; // Zero fill the bss segment while (SectionTableAddr < &__bss_section_table_end) { ExeAddr = *SectionTableAddr++; SectionLen = *SectionTableAddr++; bss_init(ExeAddr, SectionLen); } #if defined (__cplusplus) // // Call C++ library initialisation // __libc_init_array(); #endif // Reenable interrupts __asm volatile ("cpsie i"); #if defined (__REDLIB__) // Call the Redlib library, which in turn calls main() __main(); #else main(); #endif // // main() shouldn't return, but if it does, we'll just enter an infinite loop // while (1) { ; } } //***************************************************************************** // Default core exception handlers. Override the ones here by defining your own // handler routines in your application code. //***************************************************************************** WEAK_AV void NMI_Handler(void) { while(1) {} } WEAK_AV void HardFault_Handler(void) { while(1) {} } WEAK_AV void MemManage_Handler(void) { while(1) {} } WEAK_AV void BusFault_Handler(void) { while(1) {} } WEAK_AV void UsageFault_Handler(void) { while(1) {} } WEAK_AV void SecureFault_Handler(void) { while(1) {} } WEAK_AV void SVC_Handler(void) { while(1) {} } WEAK_AV void DebugMon_Handler(void) { while(1) {} } WEAK_AV void PendSV_Handler(void) { while(1) {} } WEAK_AV void SysTick_Handler(void) { while(1) {} } //***************************************************************************** // Processor ends up here if an unexpected interrupt occurs or a specific // handler is not present in the application code. //***************************************************************************** WEAK_AV void IntDefaultHandler(void) { while(1) {} } //***************************************************************************** // Default application exception handlers. Override the ones here by defining // your own handler routines in your application code. These routines call // driver exception handlers or IntDefaultHandler() if no driver exception // handler is included. //***************************************************************************** WEAK void WDT0_IRQHandler(void) { WDT0_DriverIRQHandler(); } WEAK void DMA0_IRQHandler(void) { DMA0_DriverIRQHandler(); } WEAK void GPIO_INTA_IRQHandler(void) { GPIO_INTA_DriverIRQHandler(); } WEAK void GPIO_INTB_IRQHandler(void) { GPIO_INTB_DriverIRQHandler(); } WEAK void PIN_INT0_IRQHandler(void) { PIN_INT0_DriverIRQHandler(); } WEAK void PIN_INT1_IRQHandler(void) { PIN_INT1_DriverIRQHandler(); } WEAK void PIN_INT2_IRQHandler(void) { PIN_INT2_DriverIRQHandler(); } WEAK void PIN_INT3_IRQHandler(void) { PIN_INT3_DriverIRQHandler(); } WEAK void UTICK0_IRQHandler(void) { UTICK0_DriverIRQHandler(); } WEAK void MRT0_IRQHandler(void) { MRT0_DriverIRQHandler(); } WEAK void CTIMER0_IRQHandler(void) { CTIMER0_DriverIRQHandler(); } WEAK void CTIMER1_IRQHandler(void) { CTIMER1_DriverIRQHandler(); } WEAK void SCT0_IRQHandler(void) { SCT0_DriverIRQHandler(); } WEAK void CTIMER3_IRQHandler(void) { CTIMER3_DriverIRQHandler(); } WEAK void FLEXCOMM0_IRQHandler(void) { FLEXCOMM0_DriverIRQHandler(); } WEAK void FLEXCOMM1_IRQHandler(void) { FLEXCOMM1_DriverIRQHandler(); } WEAK void FLEXCOMM2_IRQHandler(void) { FLEXCOMM2_DriverIRQHandler(); } WEAK void FLEXCOMM3_IRQHandler(void) { FLEXCOMM3_DriverIRQHandler(); } WEAK void FLEXCOMM4_IRQHandler(void) { FLEXCOMM4_DriverIRQHandler(); } WEAK void FLEXCOMM5_IRQHandler(void) { FLEXCOMM5_DriverIRQHandler(); } WEAK void FLEXCOMM14_IRQHandler(void) { FLEXCOMM14_DriverIRQHandler(); } WEAK void FLEXCOMM15_IRQHandler(void) { FLEXCOMM15_DriverIRQHandler(); } WEAK void ADC0_IRQHandler(void) { ADC0_DriverIRQHandler(); } WEAK void Reserved39_IRQHandler(void) { Reserved39_DriverIRQHandler(); } WEAK void ACMP_IRQHandler(void) { ACMP_DriverIRQHandler(); } WEAK void DMIC0_IRQHandler(void) { DMIC0_DriverIRQHandler(); } WEAK void Reserved42_IRQHandler(void) { Reserved42_DriverIRQHandler(); } WEAK void HYPERVISOR_IRQHandler(void) { HYPERVISOR_DriverIRQHandler(); } WEAK void SECUREVIOLATION_IRQHandler(void) { SECUREVIOLATION_DriverIRQHandler(); } WEAK void HWVAD0_IRQHandler(void) { HWVAD0_DriverIRQHandler(); } WEAK void Reserved46_IRQHandler(void) { Reserved46_DriverIRQHandler(); } WEAK void RNG_IRQHandler(void) { RNG_DriverIRQHandler(); } WEAK void RTC_IRQHandler(void) { RTC_DriverIRQHandler(); } WEAK void DSPWAKE_IRQHandler(void) { DSPWAKE_DriverIRQHandler(); } WEAK void MU_A_IRQHandler(void) { MU_A_DriverIRQHandler(); } WEAK void PIN_INT4_IRQHandler(void) { PIN_INT4_DriverIRQHandler(); } WEAK void PIN_INT5_IRQHandler(void) { PIN_INT5_DriverIRQHandler(); } WEAK void PIN_INT6_IRQHandler(void) { PIN_INT6_DriverIRQHandler(); } WEAK void PIN_INT7_IRQHandler(void) { PIN_INT7_DriverIRQHandler(); } WEAK void CTIMER2_IRQHandler(void) { CTIMER2_DriverIRQHandler(); } WEAK void CTIMER4_IRQHandler(void) { CTIMER4_DriverIRQHandler(); } WEAK void OS_EVENT_IRQHandler(void) { OS_EVENT_DriverIRQHandler(); } WEAK void FLEXSPI_IRQHandler(void) { FLEXSPI_DriverIRQHandler(); } WEAK void FLEXCOMM6_IRQHandler(void) { FLEXCOMM6_DriverIRQHandler(); } WEAK void FLEXCOMM7_IRQHandler(void) { FLEXCOMM7_DriverIRQHandler(); } WEAK void USDHC0_IRQHandler(void) { USDHC0_DriverIRQHandler(); } WEAK void USDHC1_IRQHandler(void) { USDHC1_DriverIRQHandler(); } WEAK void SGPIO_INTA_IRQHandler(void) { SGPIO_INTA_DriverIRQHandler(); } WEAK void SGPIO_INTB_IRQHandler(void) { SGPIO_INTB_DriverIRQHandler(); } WEAK void I3C0_IRQHandler(void) { I3C0_DriverIRQHandler(); } WEAK void USB_IRQHandler(void) { USB_DriverIRQHandler(); } WEAK void USB_WAKEUP_IRQHandler(void) { USB_WAKEUP_DriverIRQHandler(); } WEAK void WDT1_IRQHandler(void) { WDT1_DriverIRQHandler(); } WEAK void USBPHY_DCD_IRQHandler(void) { USBPHY_DCD_DriverIRQHandler(); } WEAK void DMA1_IRQHandler(void) { DMA1_DriverIRQHandler(); } WEAK void PUF_IRQHandler(void) { PUF_DriverIRQHandler(); } WEAK void POWERQUAD_IRQHandler(void) { POWERQUAD_DriverIRQHandler(); } WEAK void CASPER_IRQHandler(void) { CASPER_DriverIRQHandler(); } WEAK void PMC_PMIC_IRQHandler(void) { PMC_PMIC_DriverIRQHandler(); } WEAK void HASHCRYPT_IRQHandler(void) { HASHCRYPT_DriverIRQHandler(); } //***************************************************************************** #if defined (DEBUG) #pragma GCC pop_options #endif // (DEBUG)