//***************************************************************************** // K32L3A60_cm4 startup code for use with MCUXpresso IDE // // Version : 160420 //***************************************************************************** // // Copyright 2016-2020 NXP // All rights reserved. // // SPDX-License-Identifier: BSD-3-Clause //***************************************************************************** #if defined (DEBUG) #pragma GCC push_options #pragma GCC optimize ("Og") #endif // (DEBUG) #if defined (__cplusplus) #ifdef __REDLIB__ #error Redlib does not support C++ #else //***************************************************************************** // // The entry point for the C++ library startup // //***************************************************************************** extern "C" { extern void __libc_init_array(void); } #endif #endif #define WEAK __attribute__ ((weak)) #define WEAK_AV __attribute__ ((weak, section(".after_vectors"))) #define ALIAS(f) __attribute__ ((weak, alias (#f))) //***************************************************************************** #if defined (__cplusplus) extern "C" { #endif //***************************************************************************** // Declaration of external SystemInit function //***************************************************************************** #if defined (__USE_CMSIS) extern void SystemInit(void); #endif // (__USE_CMSIS) //***************************************************************************** // Forward declaration of the core exception handlers. // When the application defines a handler (with the same name), this will // automatically take precedence over these weak definitions. // If your application is a C++ one, then any interrupt handlers defined // in C++ files within in your main application will need to have C linkage // rather than C++ linkage. To do this, make sure that you are using extern "C" // { .... } around the interrupt handler within your main application code. //***************************************************************************** void ResetISR(void); WEAK void NMI_Handler(void); WEAK void HardFault_Handler(void); WEAK void SVC_Handler(void); WEAK void PendSV_Handler(void); WEAK void SysTick_Handler(void); WEAK void IntDefaultHandler(void); //***************************************************************************** // Forward declaration of the application IRQ handlers. When the application // defines a handler (with the same name), this will automatically take // precedence over weak definitions below //***************************************************************************** WEAK void CTI0_MCM0_IRQHandler(void); WEAK void DMA0_IRQHandler(void); WEAK void DMA1_IRQHandler(void); WEAK void DMA2_IRQHandler(void); WEAK void DMA3_IRQHandler(void); WEAK void DMA4_IRQHandler(void); WEAK void DMA5_IRQHandler(void); WEAK void DMA6_IRQHandler(void); WEAK void DMA7_IRQHandler(void); WEAK void DMA8_IRQHandler(void); WEAK void DMA9_IRQHandler(void); WEAK void DMA10_IRQHandler(void); WEAK void DMA11_IRQHandler(void); WEAK void DMA12_IRQHandler(void); WEAK void DMA13_IRQHandler(void); WEAK void DMA14_IRQHandler(void); WEAK void DMA15_IRQHandler(void); WEAK void DMA0_Error_IRQHandler(void); WEAK void MSMC_IRQHandler(void); WEAK void EWM_IRQHandler(void); WEAK void FTFE_Command_Complete_IRQHandler(void); WEAK void FTFE_Read_Collision_IRQHandler(void); WEAK void LLWU0_IRQHandler(void); WEAK void MUA_IRQHandler(void); WEAK void SPM_IRQHandler(void); WEAK void WDOG0_IRQHandler(void); WEAK void SCG_IRQHandler(void); WEAK void LPIT0_IRQHandler(void); WEAK void RTC_IRQHandler(void); WEAK void LPTMR0_IRQHandler(void); WEAK void LPTMR1_IRQHandler(void); WEAK void TPM0_IRQHandler(void); WEAK void TPM1_IRQHandler(void); WEAK void TPM2_IRQHandler(void); WEAK void EMVSIM0_IRQHandler(void); WEAK void FLEXIO0_IRQHandler(void); WEAK void LPI2C0_IRQHandler(void); WEAK void LPI2C1_IRQHandler(void); WEAK void LPI2C2_IRQHandler(void); WEAK void I2S0_IRQHandler(void); WEAK void USDHC0_IRQHandler(void); WEAK void LPSPI0_IRQHandler(void); WEAK void LPSPI1_IRQHandler(void); WEAK void LPSPI2_IRQHandler(void); WEAK void LPUART0_IRQHandler(void); WEAK void LPUART1_IRQHandler(void); WEAK void LPUART2_IRQHandler(void); WEAK void USB0_IRQHandler(void); WEAK void PORTA_IRQHandler(void); WEAK void PORTB_IRQHandler(void); WEAK void PORTC_IRQHandler(void); WEAK void PORTD_IRQHandler(void); WEAK void LPADC0_IRQHandler(void); WEAK void LPCMP0_IRQHandler(void); WEAK void LPDAC0_IRQHandler(void); WEAK void CAU3_Task_Complete_IRQHandler(void); WEAK void CAU3_Security_Violation_IRQHandler(void); WEAK void TRNG_IRQHandler(void); WEAK void LPIT1_IRQHandler(void); WEAK void LPTMR2_IRQHandler(void); WEAK void TPM3_IRQHandler(void); WEAK void LPI2C3_IRQHandler(void); WEAK void LPSPI3_IRQHandler(void); WEAK void LPUART3_IRQHandler(void); WEAK void PORTE_IRQHandler(void); WEAK void LPCMP1_IRQHandler(void); //***************************************************************************** // Forward declaration of the driver IRQ handlers. These are aliased // to the IntDefaultHandler, which is a 'forever' loop. When the driver // defines a handler (with the same name), this will automatically take // precedence over these weak definitions //***************************************************************************** void CTI0_MCM0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA3_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA4_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA5_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA6_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA7_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA8_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA9_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA10_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA11_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA12_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA13_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA14_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA15_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_Error_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void MSMC_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void EWM_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FTFE_Command_Complete_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FTFE_Read_Collision_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LLWU0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void MUA_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void SPM_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void WDOG0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void SCG_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPIT0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void RTC_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPTMR0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPTMR1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void TPM0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void TPM1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void TPM2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void EMVSIM0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXIO0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPI2C0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPI2C1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPI2C2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void I2S0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void USDHC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPSPI0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPSPI1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPSPI2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPUART0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPUART1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPUART2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void USB0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PORTA_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PORTB_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PORTC_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PORTD_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPADC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPCMP0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPDAC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void CAU3_Task_Complete_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void CAU3_Security_Violation_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void TRNG_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPIT1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPTMR2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void TPM3_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPI2C3_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPSPI3_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPUART3_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PORTE_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPCMP1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); //***************************************************************************** // The entry point for the application. // __main() is the entry point for Redlib based applications // main() is the entry point for Newlib based applications //***************************************************************************** #if defined (__REDLIB__) extern void __main(void); #endif extern int main(void); //***************************************************************************** // External declaration for the pointer to the stack top from the Linker Script //***************************************************************************** extern void _vStackTop(void); //***************************************************************************** #if defined (__cplusplus) } // extern "C" #endif //***************************************************************************** // The vector table. // This relies on the linker script to place at correct location in memory. //***************************************************************************** extern void (* const g_pfnVectors[])(void); extern void * __Vectors __attribute__ ((alias ("g_pfnVectors"))); __attribute__ ((used, section(".isr_vector"))) void (* const g_pfnVectors[])(void) = { // Core Level - CM4 &_vStackTop, // The initial stack pointer ResetISR, // The reset handler NMI_Handler, // The NMI handler HardFault_Handler, // The hard fault handler 0, // Reserved 0, // Reserved 0, // Reserved 0, // Reserved 0, // Reserved 0, // Reserved 0, // Reserved SVC_Handler, // SVCall handler 0, // Reserved 0, // Reserved PendSV_Handler, // The PendSV handler SysTick_Handler, // The SysTick handler // Chip Level - K32L3A60_cm4 CTI0_MCM0_IRQHandler, // 16: Cross Trigger Interface 0 / Miscellaneous Control Module DMA0_IRQHandler, // 17: DMA0 channel 0 transfer complete DMA1_IRQHandler, // 18: DMA0 channel 1 transfer complete DMA2_IRQHandler, // 19: DMA0 channel 2 transfer complete DMA3_IRQHandler, // 20: DMA0 channel 3 transfer complete DMA4_IRQHandler, // 21: DMA0 channel 4 transfer complete DMA5_IRQHandler, // 22: DMA0 channel 5 transfer complete DMA6_IRQHandler, // 23: DMA0 channel 6 transfer complete DMA7_IRQHandler, // 24: DMA0 channel 7 transfer complete DMA8_IRQHandler, // 25: DMA0 channel 8 transfer complete DMA9_IRQHandler, // 26: DMA0 channel 9 transfer complete DMA10_IRQHandler, // 27: DMA0 channel 10 transfer complete DMA11_IRQHandler, // 28: DMA0 channel 11 transfer complete DMA12_IRQHandler, // 29: DMA0 channel 12 transfer complete DMA13_IRQHandler, // 30: DMA0 channel 13 transfer complete DMA14_IRQHandler, // 31: DMA0 channel 14 transfer complete DMA15_IRQHandler, // 32: DMA0 channel 15 transfer complete DMA0_Error_IRQHandler, // 33: DMA0 channel 0-15 error interrupt MSMC_IRQHandler, // 34: MSMC (SMC0) interrupt EWM_IRQHandler, // 35: EWM interrupt FTFE_Command_Complete_IRQHandler, // 36: FTFE interrupt FTFE_Read_Collision_IRQHandler, // 37: FTFE interrupt LLWU0_IRQHandler, // 38: Low leakage wakeup 0 MUA_IRQHandler, // 39: MU Side A interrupt SPM_IRQHandler, // 40: SPM WDOG0_IRQHandler, // 41: WDOG0 interrupt SCG_IRQHandler, // 42: SCG interrupt LPIT0_IRQHandler, // 43: LPIT0 interrupt RTC_IRQHandler, // 44: RTC Alarm interrupt LPTMR0_IRQHandler, // 45: LPTMR0 interrupt LPTMR1_IRQHandler, // 46: LPTMR1 interrupt TPM0_IRQHandler, // 47: TPM0 single interrupt vector for all sources TPM1_IRQHandler, // 48: TPM1 single interrupt vector for all sources TPM2_IRQHandler, // 49: TPM2 single interrupt vector for all sources EMVSIM0_IRQHandler, // 50: EMVSIM0 interrupt FLEXIO0_IRQHandler, // 51: FLEXIO0 LPI2C0_IRQHandler, // 52: LPI2C0 interrupt LPI2C1_IRQHandler, // 53: LPI2C1 interrupt LPI2C2_IRQHandler, // 54: LPI2C2 interrupt I2S0_IRQHandler, // 55: I2S0 interrupt USDHC0_IRQHandler, // 56: SDHC0 interrupt LPSPI0_IRQHandler, // 57: LPSPI0 single interrupt vector for all sources LPSPI1_IRQHandler, // 58: LPSPI1 single interrupt vector for all sources LPSPI2_IRQHandler, // 59: LPSPI2 single interrupt vector for all sources LPUART0_IRQHandler, // 60: LPUART0 status and error LPUART1_IRQHandler, // 61: LPUART1 status and error LPUART2_IRQHandler, // 62: LPUART2 status and error USB0_IRQHandler, // 63: USB0 interrupt PORTA_IRQHandler, // 64: PORTA Pin detect PORTB_IRQHandler, // 65: PORTB Pin detect PORTC_IRQHandler, // 66: PORTC Pin detect PORTD_IRQHandler, // 67: PORTD Pin detect LPADC0_IRQHandler, // 68: LPADC0 interrupt LPCMP0_IRQHandler, // 69: LPCMP0 interrupt LPDAC0_IRQHandler, // 70: LPDAC0 interrupt CAU3_Task_Complete_IRQHandler, // 71: Cryptographic Acceleration Unit version 3 Task Complete CAU3_Security_Violation_IRQHandler, // 72: Cryptographic Acceleration Unit version 3 Security Violation TRNG_IRQHandler, // 73: TRNG interrupt LPIT1_IRQHandler, // 74: LPIT1 interrupt LPTMR2_IRQHandler, // 75: LPTMR2 interrupt TPM3_IRQHandler, // 76: TPM3 single interrupt vector for all sources LPI2C3_IRQHandler, // 77: LPI2C3 interrupt LPSPI3_IRQHandler, // 78: LPSPI3 single interrupt vector for all sources LPUART3_IRQHandler, // 79: LPUART3 status and error PORTE_IRQHandler, // 80: PORTE Pin detect LPCMP1_IRQHandler, // 81: LPCMP1 interrupt }; /* End of g_pfnVectors */ //***************************************************************************** // Functions to carry out the initialization of RW and BSS data sections. These // are written as separate functions rather than being inlined within the // ResetISR() function in order to cope with MCUs with multiple banks of // memory. //***************************************************************************** __attribute__ ((section(".after_vectors.init_data"))) void data_init(unsigned int romstart, unsigned int start, unsigned int len) { unsigned int *pulDest = (unsigned int*) start; unsigned int *pulSrc = (unsigned int*) romstart; unsigned int loop; for (loop = 0; loop < len; loop = loop + 4) *pulDest++ = *pulSrc++; } __attribute__ ((section(".after_vectors.init_bss"))) void bss_init(unsigned int start, unsigned int len) { unsigned int *pulDest = (unsigned int*) start; unsigned int loop; for (loop = 0; loop < len; loop = loop + 4) *pulDest++ = 0; } //***************************************************************************** // The following symbols are constructs generated by the linker, indicating // the location of various points in the "Global Section Table". This table is // created by the linker via the Code Red managed linker script mechanism. It // contains the load address, execution address and length of each RW data // section and the execution and length of each BSS (zero initialized) section. //***************************************************************************** extern unsigned int __data_section_table; extern unsigned int __data_section_table_end; extern unsigned int __bss_section_table; extern unsigned int __bss_section_table_end; //***************************************************************************** // Reset entry point for your code. // Sets up a simple runtime environment and initializes the C/C++ // library. //***************************************************************************** __attribute__ ((naked, section(".after_vectors.reset"))) void ResetISR(void) { // Disable interrupts __asm volatile ("cpsid i"); #if defined (__USE_CMSIS) // If __USE_CMSIS defined, then call CMSIS SystemInit code SystemInit(); #else // Disable Watchdog // Write watchdog update key to unlock *((volatile unsigned int *)0x41026004) = 0xD928C520; // Set timeout value *((volatile unsigned int *)0x41026008) = 0xFFFF; // Now disable watchdog via control register volatile unsigned int *WDOG_CS = (unsigned int *) 0x41026000; *WDOG_CS = (*WDOG_CS & ~(1 << 7)) | (1 << 5); #endif // (__USE_CMSIS) // // Copy the data sections from flash to SRAM. // unsigned int LoadAddr, ExeAddr, SectionLen; unsigned int *SectionTableAddr; // Load base address of Global Section Table SectionTableAddr = &__data_section_table; // Copy the data sections from flash to SRAM. while (SectionTableAddr < &__data_section_table_end) { LoadAddr = *SectionTableAddr++; ExeAddr = *SectionTableAddr++; SectionLen = *SectionTableAddr++; data_init(LoadAddr, ExeAddr, SectionLen); } // At this point, SectionTableAddr = &__bss_section_table; // Zero fill the bss segment while (SectionTableAddr < &__bss_section_table_end) { ExeAddr = *SectionTableAddr++; SectionLen = *SectionTableAddr++; bss_init(ExeAddr, SectionLen); } #if !defined (__USE_CMSIS) // Assume that if __USE_CMSIS defined, then CMSIS SystemInit code // will enable the FPU #if defined (__VFP_FP__) && !defined (__SOFTFP__) // // Code to enable the Cortex-M4 FPU only included // if appropriate build options have been selected. // Code taken from Section 7.1, Cortex-M4 TRM (DDI0439C) // // Read CPACR (located at address 0xE000ED88) // Set bits 20-23 to enable CP10 and CP11 coprocessors // Write back the modified value to the CPACR asm volatile ("LDR.W R0, =0xE000ED88\n\t" "LDR R1, [R0]\n\t" "ORR R1, R1, #(0xF << 20)\n\t" "STR R1, [R0]"); #endif // (__VFP_FP__) && !(__SOFTFP__) #endif // (__USE_CMSIS) #if !defined (__USE_CMSIS) // Assume that if __USE_CMSIS defined, then CMSIS SystemInit code // will setup the VTOR register // Check to see if we are running the code from a non-zero // address (eg RAM, external flash), in which case we need // to modify the VTOR register to tell the CPU that the // vector table is located at a non-0x0 address. unsigned int * pSCB_VTOR = (unsigned int *) 0xE000ED08; if ((unsigned int *)g_pfnVectors!=(unsigned int *) 0x00000000) { *pSCB_VTOR = (unsigned int)g_pfnVectors; } #endif // (__USE_CMSIS) #if defined (__cplusplus) // // Call C++ library initialisation // __libc_init_array(); #endif // Reenable interrupts __asm volatile ("cpsie i"); #if defined (__REDLIB__) // Call the Redlib library, which in turn calls main() __main(); #else main(); #endif // // main() shouldn't return, but if it does, we'll just enter an infinite loop // while (1) { ; } } //***************************************************************************** // Default core exception handlers. Override the ones here by defining your own // handler routines in your application code. //***************************************************************************** WEAK_AV void NMI_Handler(void) { while(1) {} } WEAK_AV void HardFault_Handler(void) { while(1) {} } WEAK_AV void SVC_Handler(void) { while(1) {} } WEAK_AV void PendSV_Handler(void) { while(1) {} } WEAK_AV void SysTick_Handler(void) { while(1) {} } //***************************************************************************** // Processor ends up here if an unexpected interrupt occurs or a specific // handler is not present in the application code. //***************************************************************************** WEAK_AV void IntDefaultHandler(void) { while(1) {} } //***************************************************************************** // Default application exception handlers. Override the ones here by defining // your own handler routines in your application code. These routines call // driver exception handlers or IntDefaultHandler() if no driver exception // handler is included. //***************************************************************************** WEAK void CTI0_MCM0_IRQHandler(void) { CTI0_MCM0_DriverIRQHandler(); } WEAK void DMA0_IRQHandler(void) { DMA0_DriverIRQHandler(); } WEAK void DMA1_IRQHandler(void) { DMA1_DriverIRQHandler(); } WEAK void DMA2_IRQHandler(void) { DMA2_DriverIRQHandler(); } WEAK void DMA3_IRQHandler(void) { DMA3_DriverIRQHandler(); } WEAK void DMA4_IRQHandler(void) { DMA4_DriverIRQHandler(); } WEAK void DMA5_IRQHandler(void) { DMA5_DriverIRQHandler(); } WEAK void DMA6_IRQHandler(void) { DMA6_DriverIRQHandler(); } WEAK void DMA7_IRQHandler(void) { DMA7_DriverIRQHandler(); } WEAK void DMA8_IRQHandler(void) { DMA8_DriverIRQHandler(); } WEAK void DMA9_IRQHandler(void) { DMA9_DriverIRQHandler(); } WEAK void DMA10_IRQHandler(void) { DMA10_DriverIRQHandler(); } WEAK void DMA11_IRQHandler(void) { DMA11_DriverIRQHandler(); } WEAK void DMA12_IRQHandler(void) { DMA12_DriverIRQHandler(); } WEAK void DMA13_IRQHandler(void) { DMA13_DriverIRQHandler(); } WEAK void DMA14_IRQHandler(void) { DMA14_DriverIRQHandler(); } WEAK void DMA15_IRQHandler(void) { DMA15_DriverIRQHandler(); } WEAK void DMA0_Error_IRQHandler(void) { DMA0_Error_DriverIRQHandler(); } WEAK void MSMC_IRQHandler(void) { MSMC_DriverIRQHandler(); } WEAK void EWM_IRQHandler(void) { EWM_DriverIRQHandler(); } WEAK void FTFE_Command_Complete_IRQHandler(void) { FTFE_Command_Complete_DriverIRQHandler(); } WEAK void FTFE_Read_Collision_IRQHandler(void) { FTFE_Read_Collision_DriverIRQHandler(); } WEAK void LLWU0_IRQHandler(void) { LLWU0_DriverIRQHandler(); } WEAK void MUA_IRQHandler(void) { MUA_DriverIRQHandler(); } WEAK void SPM_IRQHandler(void) { SPM_DriverIRQHandler(); } WEAK void WDOG0_IRQHandler(void) { WDOG0_DriverIRQHandler(); } WEAK void SCG_IRQHandler(void) { SCG_DriverIRQHandler(); } WEAK void LPIT0_IRQHandler(void) { LPIT0_DriverIRQHandler(); } WEAK void RTC_IRQHandler(void) { RTC_DriverIRQHandler(); } WEAK void LPTMR0_IRQHandler(void) { LPTMR0_DriverIRQHandler(); } WEAK void LPTMR1_IRQHandler(void) { LPTMR1_DriverIRQHandler(); } WEAK void TPM0_IRQHandler(void) { TPM0_DriverIRQHandler(); } WEAK void TPM1_IRQHandler(void) { TPM1_DriverIRQHandler(); } WEAK void TPM2_IRQHandler(void) { TPM2_DriverIRQHandler(); } WEAK void EMVSIM0_IRQHandler(void) { EMVSIM0_DriverIRQHandler(); } WEAK void FLEXIO0_IRQHandler(void) { FLEXIO0_DriverIRQHandler(); } WEAK void LPI2C0_IRQHandler(void) { LPI2C0_DriverIRQHandler(); } WEAK void LPI2C1_IRQHandler(void) { LPI2C1_DriverIRQHandler(); } WEAK void LPI2C2_IRQHandler(void) { LPI2C2_DriverIRQHandler(); } WEAK void I2S0_IRQHandler(void) { I2S0_DriverIRQHandler(); } WEAK void USDHC0_IRQHandler(void) { USDHC0_DriverIRQHandler(); } WEAK void LPSPI0_IRQHandler(void) { LPSPI0_DriverIRQHandler(); } WEAK void LPSPI1_IRQHandler(void) { LPSPI1_DriverIRQHandler(); } WEAK void LPSPI2_IRQHandler(void) { LPSPI2_DriverIRQHandler(); } WEAK void LPUART0_IRQHandler(void) { LPUART0_DriverIRQHandler(); } WEAK void LPUART1_IRQHandler(void) { LPUART1_DriverIRQHandler(); } WEAK void LPUART2_IRQHandler(void) { LPUART2_DriverIRQHandler(); } WEAK void USB0_IRQHandler(void) { USB0_DriverIRQHandler(); } WEAK void PORTA_IRQHandler(void) { PORTA_DriverIRQHandler(); } WEAK void PORTB_IRQHandler(void) { PORTB_DriverIRQHandler(); } WEAK void PORTC_IRQHandler(void) { PORTC_DriverIRQHandler(); } WEAK void PORTD_IRQHandler(void) { PORTD_DriverIRQHandler(); } WEAK void LPADC0_IRQHandler(void) { LPADC0_DriverIRQHandler(); } WEAK void LPCMP0_IRQHandler(void) { LPCMP0_DriverIRQHandler(); } WEAK void LPDAC0_IRQHandler(void) { LPDAC0_DriverIRQHandler(); } WEAK void CAU3_Task_Complete_IRQHandler(void) { CAU3_Task_Complete_DriverIRQHandler(); } WEAK void CAU3_Security_Violation_IRQHandler(void) { CAU3_Security_Violation_DriverIRQHandler(); } WEAK void TRNG_IRQHandler(void) { TRNG_DriverIRQHandler(); } WEAK void LPIT1_IRQHandler(void) { LPIT1_DriverIRQHandler(); } WEAK void LPTMR2_IRQHandler(void) { LPTMR2_DriverIRQHandler(); } WEAK void TPM3_IRQHandler(void) { TPM3_DriverIRQHandler(); } WEAK void LPI2C3_IRQHandler(void) { LPI2C3_DriverIRQHandler(); } WEAK void LPSPI3_IRQHandler(void) { LPSPI3_DriverIRQHandler(); } WEAK void LPUART3_IRQHandler(void) { LPUART3_DriverIRQHandler(); } WEAK void PORTE_IRQHandler(void) { PORTE_DriverIRQHandler(); } WEAK void LPCMP1_IRQHandler(void) { LPCMP1_DriverIRQHandler(); } //***************************************************************************** #if defined (DEBUG) #pragma GCC pop_options #endif // (DEBUG)