/* * Copyright (c) 2015, Freescale Semiconductor, Inc. * Copyright 2016-2022 NXP * All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #include "fsl_lpuart_edma.h" /* * $Coverage Justification Reference$ * * $Justification fsl_lpuart_edma_c_ref_1$ * The EDMA handle is only used by the LPUART EDMA driver, with the LPUART EDMA driver workflow, * the callback is only called when EDMA transfer done. * * $Justification fsl_lpuart_edma_c_ref_2$ * This function only handles the kLPUART_TransmissionCompleteFlag event. * */ /******************************************************************************* * Definitions ******************************************************************************/ /* Component ID definition, used by tools. */ #ifndef FSL_COMPONENT_ID #define FSL_COMPONENT_ID "platform.drivers.lpuart_edma" #endif /*base, false); /* Stop transfer. */ EDMA_AbortTransfer(handle); /* Enable tx complete interrupt */ LPUART_EnableInterrupts(lpuartPrivateHandle->base, (uint32_t)kLPUART_TransmissionCompleteInterruptEnable); } } static void LPUART_ReceiveEDMACallback(edma_handle_t *handle, void *param, bool transferDone, uint32_t tcds) { assert(NULL != param); lpuart_edma_private_handle_t *lpuartPrivateHandle = (lpuart_edma_private_handle_t *)param; /* Avoid warning for unused parameters. */ handle = handle; tcds = tcds; /* * $Branch Coverage Justification$ * $ref fsl_lpuart_edma_c_ref_1$ */ if (transferDone) { /* Disable transfer. */ LPUART_TransferAbortReceiveEDMA(lpuartPrivateHandle->base, lpuartPrivateHandle->handle); if (NULL != lpuartPrivateHandle->handle->callback) { lpuartPrivateHandle->handle->callback(lpuartPrivateHandle->base, lpuartPrivateHandle->handle, kStatus_LPUART_RxIdle, lpuartPrivateHandle->handle->userData); } } } /*! * brief Initializes the LPUART handle which is used in transactional functions. * * note This function disables all LPUART interrupts. * * param base LPUART peripheral base address. * param handle Pointer to lpuart_edma_handle_t structure. * param callback Callback function. * param userData User data. * param txEdmaHandle User requested DMA handle for TX DMA transfer. * param rxEdmaHandle User requested DMA handle for RX DMA transfer. */ void LPUART_TransferCreateHandleEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, lpuart_edma_transfer_callback_t callback, void *userData, edma_handle_t *txEdmaHandle, edma_handle_t *rxEdmaHandle) { assert(NULL != handle); uint32_t instance = LPUART_GetInstance(base); s_lpuartEdmaPrivateHandle[instance].base = base; s_lpuartEdmaPrivateHandle[instance].handle = handle; (void)memset(handle, 0, sizeof(*handle)); handle->rxState = (uint8_t)kLPUART_RxIdle; handle->txState = (uint8_t)kLPUART_TxIdle; handle->rxEdmaHandle = rxEdmaHandle; handle->txEdmaHandle = txEdmaHandle; handle->callback = callback; handle->userData = userData; #if defined(FSL_FEATURE_LPUART_HAS_FIFO) && FSL_FEATURE_LPUART_HAS_FIFO /* Note: Take care of the RX FIFO, EDMA request only assert when received bytes equal or more than RX water mark, there is potential issue if RX water mark larger than 1. For example, if RX FIFO water mark is 2, upper layer needs 5 bytes and 5 bytes are received. the last byte will be saved in FIFO but not trigger EDMA transfer because the water mark is 2. */ if (NULL != rxEdmaHandle) { base->WATER &= (~LPUART_WATER_RXWATER_MASK); } #endif /* Save the handle in global variables to support the double weak mechanism. */ s_lpuartHandle[instance] = handle; /* Set LPUART_TransferEdmaHandleIRQ as DMA IRQ handler */ s_lpuartIsr[instance] = LPUART_TransferEdmaHandleIRQ; /* Disable all LPUART internal interrupts */ LPUART_DisableInterrupts(base, (uint32_t)kLPUART_AllInterruptEnable); /* Enable interrupt in NVIC. */ #if defined(FSL_FEATURE_LPUART_HAS_SEPARATE_RX_TX_IRQ) && FSL_FEATURE_LPUART_HAS_SEPARATE_RX_TX_IRQ (void)EnableIRQ(s_lpuartTxIRQ[instance]); #else (void)EnableIRQ(s_lpuartIRQ[instance]); #endif /* Configure TX. */ if (NULL != txEdmaHandle) { EDMA_SetCallback(handle->txEdmaHandle, LPUART_SendEDMACallback, &s_lpuartEdmaPrivateHandle[instance]); } /* Configure RX. */ if (NULL != rxEdmaHandle) { EDMA_SetCallback(handle->rxEdmaHandle, LPUART_ReceiveEDMACallback, &s_lpuartEdmaPrivateHandle[instance]); } } /*! * brief Sends data using eDMA. * * This function sends data using eDMA. This is a non-blocking function, which returns * right away. When all data is sent, the send callback function is called. * * param base LPUART peripheral base address. * param handle LPUART handle pointer. * param xfer LPUART eDMA transfer structure. See #lpuart_transfer_t. * retval kStatus_Success if succeed, others failed. * retval kStatus_LPUART_TxBusy Previous transfer on going. * retval kStatus_InvalidArgument Invalid argument. */ status_t LPUART_SendEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, lpuart_transfer_t *xfer) { assert(NULL != handle); assert(NULL != handle->txEdmaHandle); assert(NULL != xfer); assert(NULL != xfer->data); assert(0U != xfer->dataSize); edma_transfer_config_t xferConfig; status_t status; /* If previous TX not finished. */ if ((uint8_t)kLPUART_TxBusy == handle->txState) { status = kStatus_LPUART_TxBusy; } else { handle->txState = (uint8_t)kLPUART_TxBusy; handle->txDataSizeAll = xfer->dataSize; /* Prepare transfer. */ EDMA_PrepareTransfer(&xferConfig, xfer->data, sizeof(uint8_t), (void *)(uint32_t *)LPUART_GetDataRegisterAddress(base), sizeof(uint8_t), sizeof(uint8_t), xfer->dataSize, kEDMA_MemoryToPeripheral); /* Store the initially configured eDMA minor byte transfer count into the LPUART handle */ handle->nbytes = (uint8_t)sizeof(uint8_t); /* Submit transfer. */ if (kStatus_Success != EDMA_SubmitTransfer(handle->txEdmaHandle, (const edma_transfer_config_t *)(uint32_t)&xferConfig)) { return kStatus_Fail; } EDMA_StartTransfer(handle->txEdmaHandle); /* Enable LPUART TX EDMA. */ LPUART_EnableTxDMA(base, true); status = kStatus_Success; } return status; } /*! * brief Receives data using eDMA. * * This function receives data using eDMA. This is non-blocking function, which returns * right away. When all data is received, the receive callback function is called. * * param base LPUART peripheral base address. * param handle Pointer to lpuart_edma_handle_t structure. * param xfer LPUART eDMA transfer structure, see #lpuart_transfer_t. * retval kStatus_Success if succeed, others fail. * retval kStatus_LPUART_RxBusy Previous transfer ongoing. * retval kStatus_InvalidArgument Invalid argument. */ status_t LPUART_ReceiveEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, lpuart_transfer_t *xfer) { assert(NULL != handle); assert(NULL != handle->rxEdmaHandle); assert(NULL != xfer); assert(NULL != xfer->data); assert(0U != xfer->dataSize); edma_transfer_config_t xferConfig; status_t status; /* If previous RX not finished. */ if ((uint8_t)kLPUART_RxBusy == handle->rxState) { status = kStatus_LPUART_RxBusy; } else { handle->rxState = (uint8_t)kLPUART_RxBusy; handle->rxDataSizeAll = xfer->dataSize; /* Prepare transfer. */ EDMA_PrepareTransfer(&xferConfig, (void *)(uint32_t *)LPUART_GetDataRegisterAddress(base), sizeof(uint8_t), xfer->data, sizeof(uint8_t), sizeof(uint8_t), xfer->dataSize, kEDMA_PeripheralToMemory); /* Store the initially configured eDMA minor byte transfer count into the LPUART handle */ handle->nbytes = (uint8_t)sizeof(uint8_t); /* Submit transfer. */ if (kStatus_Success != EDMA_SubmitTransfer(handle->rxEdmaHandle, (const edma_transfer_config_t *)(uint32_t)&xferConfig)) { return kStatus_Fail; } EDMA_StartTransfer(handle->rxEdmaHandle); /* Enable LPUART RX EDMA. */ LPUART_EnableRxDMA(base, true); status = kStatus_Success; } return status; } /*! * brief Aborts the sent data using eDMA. * * This function aborts the sent data using eDMA. * * param base LPUART peripheral base address. * param handle Pointer to lpuart_edma_handle_t structure. */ void LPUART_TransferAbortSendEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle) { assert(NULL != handle); assert(NULL != handle->txEdmaHandle); /* Disable LPUART TX EDMA. */ LPUART_EnableTxDMA(base, false); /* Stop transfer. */ EDMA_AbortTransfer(handle->txEdmaHandle); handle->txState = (uint8_t)kLPUART_TxIdle; } /*! * brief Aborts the received data using eDMA. * * This function aborts the received data using eDMA. * * param base LPUART peripheral base address. * param handle Pointer to lpuart_edma_handle_t structure. */ void LPUART_TransferAbortReceiveEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle) { assert(NULL != handle); assert(NULL != handle->rxEdmaHandle); /* Disable LPUART RX EDMA. */ LPUART_EnableRxDMA(base, false); /* Stop transfer. */ EDMA_AbortTransfer(handle->rxEdmaHandle); handle->rxState = (uint8_t)kLPUART_RxIdle; } /*! * brief Gets the number of received bytes. * * This function gets the number of received bytes. * * param base LPUART peripheral base address. * param handle LPUART handle pointer. * param count Receive bytes count. * retval kStatus_NoTransferInProgress No receive in progress. * retval kStatus_InvalidArgument Parameter is invalid. * retval kStatus_Success Get successfully through the parameter \p count; */ status_t LPUART_TransferGetReceiveCountEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, uint32_t *count) { assert(NULL != handle); assert(NULL != handle->rxEdmaHandle); assert(NULL != count); if ((uint8_t)kLPUART_RxIdle == handle->rxState) { return kStatus_NoTransferInProgress; } *count = handle->rxDataSizeAll - ((uint32_t)handle->nbytes * EDMA_GetRemainingMajorLoopCount(handle->rxEdmaHandle->base, handle->rxEdmaHandle->channel)); return kStatus_Success; } /*! * brief Gets the number of bytes written to the LPUART TX register. * * This function gets the number of bytes written to the LPUART TX * register by DMA. * * param base LPUART peripheral base address. * param handle LPUART handle pointer. * param count Send bytes count. * retval kStatus_NoTransferInProgress No send in progress. * retval kStatus_InvalidArgument Parameter is invalid. * retval kStatus_Success Get successfully through the parameter \p count; */ status_t LPUART_TransferGetSendCountEDMA(LPUART_Type *base, lpuart_edma_handle_t *handle, uint32_t *count) { assert(NULL != handle); assert(NULL != handle->txEdmaHandle); assert(NULL != count); if ((uint8_t)kLPUART_TxIdle == handle->txState) { return kStatus_NoTransferInProgress; } *count = handle->txDataSizeAll - ((uint32_t)handle->nbytes * EDMA_GetRemainingMajorLoopCount(handle->txEdmaHandle->base, handle->txEdmaHandle->channel)); return kStatus_Success; } /*! * brief LPUART eDMA IRQ handle function. * * This function handles the LPUART tx complete IRQ request and invoke user callback. * It is not set to static so that it can be used in user application. * note This function is used as default IRQ handler by double weak mechanism. * If user's specific IRQ handler is implemented, make sure this function is invoked in the handler. * * param base LPUART peripheral base address. * param lpuartEdmaHandle LPUART handle pointer. */ void LPUART_TransferEdmaHandleIRQ(LPUART_Type *base, void *lpuartEdmaHandle) { assert(lpuartEdmaHandle != NULL); /* * $Branch Coverage Justification$ * $ref fsl_lpuart_edma_c_ref_2$ */ if (((uint32_t)kLPUART_TransmissionCompleteFlag & LPUART_GetStatusFlags(base)) != 0U) { lpuart_edma_handle_t *handle = (lpuart_edma_handle_t *)lpuartEdmaHandle; /* Disable tx complete interrupt */ LPUART_DisableInterrupts(base, (uint32_t)kLPUART_TransmissionCompleteInterruptEnable); handle->txState = (uint8_t)kLPUART_TxIdle; if (handle->callback != NULL) { handle->callback(base, handle, kStatus_LPUART_TxIdle, handle->userData); } } }