/* * Copyright (c) 2016, Freescale Semiconductor, Inc. * Copyright 2018 NXP * All rights reserved. * * SPDX-License-Identifier: BSD-3-Clause */ #if defined (DEBUG) #pragma GCC push_options #pragma GCC optimize ("Og") #endif // (DEBUG) #if defined (__cplusplus) #ifdef __REDLIB__ #error Redlib does not support C++ #else //***************************************************************************** // // The entry point for the C++ library startup // //***************************************************************************** extern "C" { extern void __libc_init_array(void); } #endif #endif #define WEAK __attribute__ ((weak)) #define WEAK_AV __attribute__ ((weak, section(".after_vectors"))) #define ALIAS(f) __attribute__ ((weak, alias (#f))) //***************************************************************************** #if defined (__cplusplus) extern "C" { #endif //***************************************************************************** // Declaration of external SystemInit function //***************************************************************************** #if defined (__USE_CMSIS) extern void SystemInit(void); #endif // (__USE_CMSIS) //***************************************************************************** // Forward declaration of the core exception handlers. // When the application defines a handler (with the same name), this will // automatically take precedence over these weak definitions //***************************************************************************** void ResetISR(void); WEAK void NMI_Handler(void); WEAK void HardFault_Handler(void); WEAK void MemManage_Handler(void); WEAK void BusFault_Handler(void); WEAK void UsageFault_Handler(void); WEAK void SVC_Handler(void); WEAK void DebugMon_Handler(void); WEAK void PendSV_Handler(void); WEAK void SysTick_Handler(void); WEAK void IntDefaultHandler(void); //***************************************************************************** // Forward declaration of the application IRQ handlers. When the application // defines a handler (with the same name), this will automatically take // precedence over weak definitions below //***************************************************************************** WEAK void CTI0_IRQHandler(void); WEAK void DMA0_0_4_IRQHandler(void); WEAK void DMA0_1_5_IRQHandler(void); WEAK void DMA0_2_6_IRQHandler(void); WEAK void DMA0_3_7_IRQHandler(void); WEAK void DMA0_8_12_IRQHandler(void); WEAK void DMA0_9_13_IRQHandler(void); WEAK void DMA0_10_14_IRQHandler(void); WEAK void DMA0_11_15_IRQHandler(void); WEAK void DMA0_16_20_IRQHandler(void); WEAK void DMA0_17_21_IRQHandler(void); WEAK void DMA0_18_22_IRQHandler(void); WEAK void DMA0_19_23_IRQHandler(void); WEAK void DMA0_24_28_IRQHandler(void); WEAK void DMA0_25_29_IRQHandler(void); WEAK void DMA0_26_30_IRQHandler(void); WEAK void DMA0_27_31_IRQHandler(void); WEAK void DMA0_Error_IRQHandler(void); WEAK void MCM0_IRQHandler(void); WEAK void EWM_IRQHandler(void); WEAK void LLWU0_IRQHandler(void); WEAK void SIM_IRQHandler(void); WEAK void MU_A_IRQHandler(void); WEAK void Reserved39_IRQHandler(void); WEAK void Software1_IRQHandler(void); WEAK void Software2_IRQHandler(void); WEAK void WDOG0_IRQHandler(void); WEAK void SCG0_IRQHandler(void); WEAK void QSPI_IRQHandler(void); WEAK void LTC_IRQHandler(void); WEAK void Reserved46_IRQHandler(void); WEAK void SNVS_IRQHandler(void); WEAK void TRNG0_IRQHandler(void); WEAK void LPIT0_IRQHandler(void); WEAK void PMC0_IRQHandler(void); WEAK void CMC0_IRQHandler(void); WEAK void LPTMR0_IRQHandler(void); WEAK void LPTMR1_IRQHandler(void); WEAK void TPM0_IRQHandler(void); WEAK void TPM1_IRQHandler(void); WEAK void TPM2_IRQHandler(void); WEAK void TPM3_IRQHandler(void); WEAK void FLEXIO0_IRQHandler(void); WEAK void LPI2C0_IRQHandler(void); WEAK void LPI2C1_IRQHandler(void); WEAK void LPI2C2_IRQHandler(void); WEAK void LPI2C3_IRQHandler(void); WEAK void SAI0_IRQHandler(void); WEAK void SAI1_IRQHandler(void); WEAK void LPSPI0_IRQHandler(void); WEAK void LPSPI1_IRQHandler(void); WEAK void LPUART0_IRQHandler(void); WEAK void LPUART1_IRQHandler(void); WEAK void LPUART2_IRQHandler(void); WEAK void LPUART3_IRQHandler(void); WEAK void DPM_IRQHandler(void); WEAK void PCTLA_IRQHandler(void); WEAK void PCTLB_IRQHandler(void); WEAK void ADC0_IRQHandler(void); WEAK void ADC1_IRQHandler(void); WEAK void CMP0_IRQHandler(void); WEAK void CMP1_IRQHandler(void); WEAK void DAC0_IRQHandler(void); WEAK void DAC1_IRQHandler(void); WEAK void WDOG1_IRQHandler(void); WEAK void USB0_IRQHandler(void); WEAK void USB1_IRQHandler(void); WEAK void Reserved83_IRQHandler(void); WEAK void WDOG2_IRQHandler(void); WEAK void USBPHY_IRQHandler(void); WEAK void CMC1_IRQHandler(void); //***************************************************************************** // Forward declaration of the driver IRQ handlers. These are aliased // to the IntDefaultHandler, which is a 'forever' loop. When the driver // defines a handler (with the same name), this will automatically take // precedence over these weak definitions //***************************************************************************** void CTI0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_0_4_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_1_5_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_2_6_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_3_7_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_8_12_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_9_13_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_10_14_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_11_15_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_16_20_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_17_21_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_18_22_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_19_23_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_24_28_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_25_29_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_26_30_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_27_31_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DMA0_Error_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void MCM0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void EWM_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LLWU0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void SIM_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void MU_A_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void Reserved39_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void Software1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void Software2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void WDOG0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void SCG0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void QSPI_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LTC_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void Reserved46_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void SNVS_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void TRNG0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPIT0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PMC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void CMC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPTMR0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPTMR1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void TPM0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void TPM1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void TPM2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void TPM3_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void FLEXIO0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPI2C0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPI2C1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPI2C2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPI2C3_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void SAI0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void SAI1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPSPI0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPSPI1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPUART0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPUART1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPUART2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void LPUART3_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DPM_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PCTLA_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void PCTLB_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void ADC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void ADC1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void CMP0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void CMP1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DAC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void DAC1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void WDOG1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void USB0_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void USB1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void Reserved83_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void WDOG2_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void USBPHY_DriverIRQHandler(void) ALIAS(IntDefaultHandler); void CMC1_DriverIRQHandler(void) ALIAS(IntDefaultHandler); //***************************************************************************** // The entry point for the application. // __main() is the entry point for Redlib based applications // main() is the entry point for Newlib based applications //***************************************************************************** #if defined (__REDLIB__) extern void __main(void); #endif extern int main(void); //***************************************************************************** // External declaration for the pointer to the stack top from the Linker Script //***************************************************************************** extern void _vStackTop(void); //***************************************************************************** #if defined (__cplusplus) } // extern "C" #endif //***************************************************************************** // The vector table. // This relies on the linker script to place at correct location in memory. //***************************************************************************** extern void (* const g_pfnVectors[])(void); __attribute__ ((section(".isr_vector"))) void (* const g_pfnVectors[])(void) = { &_vStackTop, // The initial stack pointer ResetISR, // The reset handler NMI_Handler, //NMI Handler HardFault_Handler, //Hard Fault Handler MemManage_Handler, //MPU Fault Handler BusFault_Handler, //Bus Fault Handler UsageFault_Handler, //Usage Fault Handler 0, //Reserved 0, //Reserved 0, //Reserved 0, //Reserved SVC_Handler, //SVCall Handler DebugMon_Handler, //Debug Monitor Handler 0, //Reserved PendSV_Handler, //PendSV Handler SysTick_Handler, //SysTick Handler //External Interrupts CTI0_IRQHandler, //Cross Trigger Interface for CM4 DMA0_0_4_IRQHandler, //DMA Channel 0, 4 Transfer Complete DMA0_1_5_IRQHandler, //DMA Channel 1, 5 Transfer Complete DMA0_2_6_IRQHandler, //DMA Channel 2, 6 Transfer Complete DMA0_3_7_IRQHandler, //DMA Channel 3, 7 Transfer Complete DMA0_8_12_IRQHandler, //DMA Channel 8, 12 Transfer Complete DMA0_9_13_IRQHandler, //DMA Channel 9, 13 Transfer Complete DMA0_10_14_IRQHandler, //DMA Channel 10, 14 Transfer Complete DMA0_11_15_IRQHandler, //DMA Channel 11, 15 Transfer Complete DMA0_16_20_IRQHandler, //DMA Channel 16, 20 Transfer Complete DMA0_17_21_IRQHandler, //DMA Channel 17, 21 Transfer Complete DMA0_18_22_IRQHandler, //DMA Channel 18, 22 Transfer Complete DMA0_19_23_IRQHandler, //DMA Channel 19, 23 Transfer Complete DMA0_24_28_IRQHandler, //DMA Channel 24, 28 Transfer Complete DMA0_25_29_IRQHandler, //DMA Channel 25, 29 Transfer Complete DMA0_26_30_IRQHandler, //DMA Channel 26, 30 Transfer Complete DMA0_27_31_IRQHandler, //DMA Channel 27, 31 Transfer Complete DMA0_Error_IRQHandler, //DMA Error Interrupt - All Channels MCM0_IRQHandler, //MCM Interrupt EWM_IRQHandler, //External Watchdog Monitor Interrupt LLWU0_IRQHandler, //Low Leakage Wake Up SIM_IRQHandler, //System Integation Module MU_A_IRQHandler, //Messaging Unit - Side A Reserved39_IRQHandler, //Secured JTAG Controller Software1_IRQHandler, //Software Interrupt Software2_IRQHandler, //Software Interrupt WDOG0_IRQHandler, //Watchdog Interrupt SCG0_IRQHandler, //System Clock Generator for M4 domain QSPI_IRQHandler, //Quad Serial Peripheral Interface LTC_IRQHandler, //Low Power Trusted Cryptography Reserved46_IRQHandler, //Reserved SNVS_IRQHandler, //Secure Non-Volatile Storage Consolidated Interrupt TRNG0_IRQHandler, //Random Number Generator LPIT0_IRQHandler, //Low Power Periodic Interrupt Timer PMC0_IRQHandler, //Power Management Control interrupts for M4 domain CMC0_IRQHandler, //Core Mode Controller interrupts for M4 domain LPTMR0_IRQHandler, //Low Power Timer LPTMR1_IRQHandler, //Low Power Timer TPM0_IRQHandler, //Timer PWM module TPM1_IRQHandler, //Timer PWM module TPM2_IRQHandler, //Timer PWM module TPM3_IRQHandler, //Timer PWM module FLEXIO0_IRQHandler, //Flexible IO LPI2C0_IRQHandler, //Inter-integrated circuit 0 LPI2C1_IRQHandler, //Inter-integrated circuit 1 LPI2C2_IRQHandler, //Inter-integrated circuit 2 LPI2C3_IRQHandler, //Inter-integrated circuit 3 SAI0_IRQHandler, //Serial Audio Interface SAI1_IRQHandler, //Serial Audio Interface 1 LPSPI0_IRQHandler, //Low Power Serial Peripheral Interface LPSPI1_IRQHandler, //Low Power Serial Peripheral Interface LPUART0_IRQHandler, //Low Power UART LPUART1_IRQHandler, //Low Power UART LPUART2_IRQHandler, //Low Power UART LPUART3_IRQHandler, //Low Power UART DPM_IRQHandler, //Dynamic Process Monitor PCTLA_IRQHandler, //Port A pin interrupt PCTLB_IRQHandler, //Port B pin interrupt ADC0_IRQHandler, //Analog to Digital Convertor ADC1_IRQHandler, //Analog to Digital Convertor CMP0_IRQHandler, //Comparator CMP1_IRQHandler, //Comparator DAC0_IRQHandler, //Digital to Analog Convertor DAC1_IRQHandler, //Digital to Analog Convertor WDOG1_IRQHandler, //Watchdog Interrupt from A7 subsystem USB0_IRQHandler, //USB 0 Interrupt from A7 subsystem USB1_IRQHandler, //USB 1 Interrupt from A7 subsystem Reserved83_IRQHandler, // WDOG2_IRQHandler, //Watchdog Interrupt from A7 subsystem USBPHY_IRQHandler, //USB PHY (used in conjunction with USBOTG0) CMC1_IRQHandler, //A7 resets }; /* End of g_pfnVectors */ //***************************************************************************** // Functions to carry out the initialization of RW and BSS data sections. These // are written as separate functions rather than being inlined within the // ResetISR() function in order to cope with MCUs with multiple banks of // memory. //***************************************************************************** __attribute__ ((section(".after_vectors.init_data"))) void data_init(unsigned int romstart, unsigned int start, unsigned int len) { unsigned int *pulDest = (unsigned int*) start; unsigned int *pulSrc = (unsigned int*) romstart; unsigned int loop; for (loop = 0; loop < len; loop = loop + 4) *pulDest++ = *pulSrc++; } __attribute__ ((section(".after_vectors.init_bss"))) void bss_init(unsigned int start, unsigned int len) { unsigned int *pulDest = (unsigned int*) start; unsigned int loop; for (loop = 0; loop < len; loop = loop + 4) *pulDest++ = 0; } //***************************************************************************** // The following symbols are constructs generated by the linker, indicating // the location of various points in the "Global Section Table". This table is // created by the linker via the Code Red managed linker script mechanism. It // contains the load address, execution address and length of each RW data // section and the execution and length of each BSS (zero initialized) section. //***************************************************************************** extern unsigned int __data_section_table; extern unsigned int __data_section_table_end; extern unsigned int __bss_section_table; extern unsigned int __bss_section_table_end; //***************************************************************************** // Reset entry point for your code. // Sets up a simple runtime environment and initializes the C/C++ // library. //***************************************************************************** __attribute__ ((naked, section(".after_vectors.reset"))) void ResetISR(void) { // Disable interrupts __asm volatile ("cpsid i"); #if defined (__USE_CMSIS) // If __USE_CMSIS defined, then call CMSIS SystemInit code SystemInit(); #endif // (__USE_CMSIS) // // Copy the data sections from flash to SRAM. // unsigned int LoadAddr, ExeAddr, SectionLen; unsigned int *SectionTableAddr; // Load base address of Global Section Table SectionTableAddr = &__data_section_table; // Copy the data sections from flash to SRAM. while (SectionTableAddr < &__data_section_table_end) { LoadAddr = *SectionTableAddr++; ExeAddr = *SectionTableAddr++; SectionLen = *SectionTableAddr++; data_init(LoadAddr, ExeAddr, SectionLen); } // At this point, SectionTableAddr = &__bss_section_table; // Zero fill the bss segment while (SectionTableAddr < &__bss_section_table_end) { ExeAddr = *SectionTableAddr++; SectionLen = *SectionTableAddr++; bss_init(ExeAddr, SectionLen); } #if !defined (__USE_CMSIS) // Assume that if __USE_CMSIS defined, then CMSIS SystemInit code // will enable the FPU #if defined (__VFP_FP__) && !defined (__SOFTFP__) // // Code to enable the Cortex-M4 FPU only included // if appropriate build options have been selected. // Code taken from Section 7.1, Cortex-M4 TRM (DDI0439C) // // Read CPACR (located at address 0xE000ED88) // Set bits 20-23 to enable CP10 and CP11 coprocessors // Write back the modified value to the CPACR asm volatile ("LDR.W R0, =0xE000ED88\n\t" "LDR R1, [R0]\n\t" "ORR R1, R1, #(0xF << 20)\n\t" "STR R1, [R0]"); #endif // (__VFP_FP__) && !(__SOFTFP__) #endif // (__USE_CMSIS) #if !defined (__USE_CMSIS) // Assume that if __USE_CMSIS defined, then CMSIS SystemInit code // will setup the VTOR register // Check to see if we are running the code from a non-zero // address (eg RAM, external flash), in which case we need // to modify the VTOR register to tell the CPU that the // vector table is located at a non-0x0 address. unsigned int * pSCB_VTOR = (unsigned int *) 0xE000ED08; if ((unsigned int *)g_pfnVectors!=(unsigned int *) 0x00000000) { *pSCB_VTOR = (unsigned int)g_pfnVectors; } #endif // (__USE_CMSIS) #if defined (__cplusplus) // // Call C++ library initialisation // __libc_init_array(); #endif // Reenable interrupts __asm volatile ("cpsie i"); #if defined (__REDLIB__) // Call the Redlib library, which in turn calls main() __main() ; #else main(); #endif // // main() shouldn't return, but if it does, we'll just enter an infinite loop // while (1) { ; } } //***************************************************************************** // Default core exception handlers. Override the ones here by defining your own // handler routines in your application code. //***************************************************************************** WEAK void NMI_Handler(void) //NMI Handler { while(1) {} } WEAK void HardFault_Handler(void) //Hard Fault Handler { while(1) {} } WEAK void MemManage_Handler(void) //MPU Fault Handler { while(1) {} } WEAK void BusFault_Handler(void) //Bus Fault Handler { while(1) {} } WEAK void UsageFault_Handler(void) //Usage Fault Handler { while(1) {} } WEAK void SVC_Handler(void) //SVCall Handler { while(1) {} } WEAK void DebugMon_Handler(void) //Debug Monitor Handler { while(1) {} } WEAK void PendSV_Handler(void) //PendSV Handler { while(1) {} } WEAK void SysTick_Handler(void) //SysTick Handler { while(1) {} } //***************************************************************************** // Processor ends up here if an unexpected interrupt occurs or a specific // handler is not present in the application code. //***************************************************************************** WEAK_AV void IntDefaultHandler(void) { while(1) {} } //***************************************************************************** // Default application exception handlers. Override the ones here by defining // your own handler routines in your application code. These routines call // driver exception handlers or IntDefaultHandler() if no driver exception // handler is included. //***************************************************************************** WEAK void CTI0_IRQHandler(void) //Cross Trigger Interface for CM4 { CTI0_DriverIRQHandler(); } WEAK void DMA0_0_4_IRQHandler(void) //DMA Channel 0, 4 Transfer Complete { DMA0_0_4_DriverIRQHandler(); } WEAK void DMA0_1_5_IRQHandler(void) //DMA Channel 1, 5 Transfer Complete { DMA0_1_5_DriverIRQHandler(); } WEAK void DMA0_2_6_IRQHandler(void) //DMA Channel 2, 6 Transfer Complete { DMA0_2_6_DriverIRQHandler(); } WEAK void DMA0_3_7_IRQHandler(void) //DMA Channel 3, 7 Transfer Complete { DMA0_3_7_DriverIRQHandler(); } WEAK void DMA0_8_12_IRQHandler(void) //DMA Channel 8, 12 Transfer Complete { DMA0_8_12_DriverIRQHandler(); } WEAK void DMA0_9_13_IRQHandler(void) //DMA Channel 9, 13 Transfer Complete { DMA0_9_13_DriverIRQHandler(); } WEAK void DMA0_10_14_IRQHandler(void) //DMA Channel 10, 14 Transfer Complete { DMA0_10_14_DriverIRQHandler(); } WEAK void DMA0_11_15_IRQHandler(void) //DMA Channel 11, 15 Transfer Complete { DMA0_11_15_DriverIRQHandler(); } WEAK void DMA0_16_20_IRQHandler(void) //DMA Channel 16, 20 Transfer Complete { DMA0_16_20_DriverIRQHandler(); } WEAK void DMA0_17_21_IRQHandler(void) //DMA Channel 17, 21 Transfer Complete { DMA0_17_21_DriverIRQHandler(); } WEAK void DMA0_18_22_IRQHandler(void) //DMA Channel 18, 22 Transfer Complete { DMA0_18_22_DriverIRQHandler(); } WEAK void DMA0_19_23_IRQHandler(void) //DMA Channel 19, 23 Transfer Complete { DMA0_19_23_DriverIRQHandler(); } WEAK void DMA0_24_28_IRQHandler(void) //DMA Channel 24, 28 Transfer Complete { DMA0_24_28_DriverIRQHandler(); } WEAK void DMA0_25_29_IRQHandler(void) //DMA Channel 25, 29 Transfer Complete { DMA0_25_29_DriverIRQHandler(); } WEAK void DMA0_26_30_IRQHandler(void) //DMA Channel 26, 30 Transfer Complete { DMA0_26_30_DriverIRQHandler(); } WEAK void DMA0_27_31_IRQHandler(void) //DMA Channel 27, 31 Transfer Complete { DMA0_27_31_DriverIRQHandler(); } WEAK void DMA0_Error_IRQHandler(void) //DMA Error Interrupt - All Channels { DMA0_Error_DriverIRQHandler(); } WEAK void MCM0_IRQHandler(void) //MCM Interrupt { MCM0_DriverIRQHandler(); } WEAK void EWM_IRQHandler(void) //External Watchdog Monitor Interrupt { EWM_DriverIRQHandler(); } WEAK void LLWU0_IRQHandler(void) //Low Leakage Wake Up { LLWU0_DriverIRQHandler(); } WEAK void SIM_IRQHandler(void) //System Integation Module { SIM_DriverIRQHandler(); } WEAK void MU_A_IRQHandler(void) //Messaging Unit - Side A { MU_A_DriverIRQHandler(); } WEAK void Software1_IRQHandler(void) //Software Interrupt { Software1_DriverIRQHandler(); } WEAK void Software2_IRQHandler(void) //Software Interrupt { Software2_DriverIRQHandler(); } WEAK void WDOG0_IRQHandler(void) //Watchdog Interrupt { WDOG0_DriverIRQHandler(); } WEAK void SCG0_IRQHandler(void) //System Clock Generator for M4 domain { SCG0_DriverIRQHandler(); } WEAK void QSPI_IRQHandler(void) //Quad Serial Peripheral Interface { QSPI_DriverIRQHandler(); } WEAK void LTC_IRQHandler(void) //Low Power Trusted Cryptography { LTC_DriverIRQHandler(); } WEAK void SNVS_IRQHandler(void) //Secure Non-Volatile Storage Consolidated Interrupt { SNVS_DriverIRQHandler(); } WEAK void TRNG0_IRQHandler(void) //Random Number Generator { TRNG0_DriverIRQHandler(); } WEAK void LPIT0_IRQHandler(void) //Low Power Periodic Interrupt Timer { LPIT0_DriverIRQHandler(); } WEAK void PMC0_IRQHandler(void) //Power Management Control interrupts for M4 domain { PMC0_DriverIRQHandler(); } WEAK void CMC0_IRQHandler(void) //Core Mode Controller interrupts for M4 domain { CMC0_DriverIRQHandler(); } WEAK void LPTMR0_IRQHandler(void) //Low Power Timer { LPTMR0_DriverIRQHandler(); } WEAK void LPTMR1_IRQHandler(void) //Low Power Timer { LPTMR1_DriverIRQHandler(); } WEAK void TPM0_IRQHandler(void) //Timer PWM module { TPM0_DriverIRQHandler(); } WEAK void TPM1_IRQHandler(void) //Timer PWM module { TPM1_DriverIRQHandler(); } WEAK void TPM2_IRQHandler(void) //Timer PWM module { TPM2_DriverIRQHandler(); } WEAK void TPM3_IRQHandler(void) //Timer PWM module { TPM3_DriverIRQHandler(); } WEAK void FLEXIO0_IRQHandler(void) //Flexible IO { FLEXIO0_DriverIRQHandler(); } WEAK void LPI2C0_IRQHandler(void) //Inter-integrated circuit 0 { LPI2C0_DriverIRQHandler(); } WEAK void LPI2C1_IRQHandler(void) //Inter-integrated circuit 1 { LPI2C1_DriverIRQHandler(); } WEAK void LPI2C2_IRQHandler(void) //Inter-integrated circuit 2 { LPI2C2_DriverIRQHandler(); } WEAK void LPI2C3_IRQHandler(void) //Inter-integrated circuit 3 { LPI2C3_DriverIRQHandler(); } WEAK void SAI0_IRQHandler(void) //Serial Audio Interface { SAI0_DriverIRQHandler(); } WEAK void SAI1_IRQHandler(void) //Serial Audio Interface 1 { SAI1_DriverIRQHandler(); } WEAK void LPSPI0_IRQHandler(void) //Low Power Serial Peripheral Interface { LPSPI0_DriverIRQHandler(); } WEAK void LPSPI1_IRQHandler(void) //Low Power Serial Peripheral Interface { LPSPI1_DriverIRQHandler(); } WEAK void LPUART0_IRQHandler(void) //Low Power UART { LPUART0_DriverIRQHandler(); } WEAK void LPUART1_IRQHandler(void) //Low Power UART { LPUART1_DriverIRQHandler(); } WEAK void LPUART2_IRQHandler(void) //Low Power UART { LPUART2_DriverIRQHandler(); } WEAK void LPUART3_IRQHandler(void) //Low Power UART { LPUART3_DriverIRQHandler(); } WEAK void DPM_IRQHandler(void) //Dynamic Process Monitor { DPM_DriverIRQHandler(); } WEAK void PCTLA_IRQHandler(void) //Port A pin interrupt { PCTLA_DriverIRQHandler(); } WEAK void PCTLB_IRQHandler(void) //Port B pin interrupt { PCTLB_DriverIRQHandler(); } WEAK void ADC0_IRQHandler(void) //Analog to Digital Convertor { ADC0_DriverIRQHandler(); } WEAK void ADC1_IRQHandler(void) //Analog to Digital Convertor { ADC1_DriverIRQHandler(); } WEAK void CMP0_IRQHandler(void) //Comparator { CMP0_DriverIRQHandler(); } WEAK void CMP1_IRQHandler(void) //Comparator { CMP1_DriverIRQHandler(); } WEAK void DAC0_IRQHandler(void) //Digital to Analog Convertor { DAC0_DriverIRQHandler(); } WEAK void DAC1_IRQHandler(void) //Digital to Analog Convertor { DAC1_DriverIRQHandler(); } WEAK void WDOG1_IRQHandler(void) //Watchdog Interrupt from A7 subsystem { WDOG1_DriverIRQHandler(); } WEAK void USB0_IRQHandler(void) //USB 0 Interrupt from A7 subsystem { USB0_DriverIRQHandler(); } WEAK void USB1_IRQHandler(void) //USB 1 Interrupt from A7 subsystem { USB1_DriverIRQHandler(); } WEAK void WDOG2_IRQHandler(void) //Watchdog Interrupt from A7 subsystem { WDOG2_DriverIRQHandler(); } WEAK void USBPHY_IRQHandler(void) //USB PHY (used in conjunction with USBOTG0) { USBPHY_DriverIRQHandler(); } WEAK void CMC1_IRQHandler(void) //A7 resets { CMC1_DriverIRQHandler(); } //***************************************************************************** #if defined (DEBUG) #pragma GCC pop_options #endif // (DEBUG)