/*
 * Copyright (c) 2016, Freescale Semiconductor, Inc.
 * Copyright 2016, NXP
 * All rights reserved.
 *
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */
#ifndef _FSL_POWER_H_
#define _FSL_POWER_H_

#include "fsl_common.h"

/*! @addtogroup power */
/*! @{ */

/*! @file */

/*******************************************************************************
 * Definitions
 ******************************************************************************/

/*! @name Driver version */
/*@{*/
/*! @brief power driver version 2.0.0. */
#define FSL_POWER_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/

#define MAKE_PD_BITS(reg, slot) (((reg) << 8) | (slot))
#define PDRCFG0 0x0U
#define PDRCFG1 0x1U

typedef enum pd_bits
{
    kPDRUNCFG_PD_FRO_EN = MAKE_PD_BITS(PDRCFG0, 4U),
    kPDRUNCFG_PD_FLASH = MAKE_PD_BITS(PDRCFG0, 5U),
    kPDRUNCFG_PD_TEMPS = MAKE_PD_BITS(PDRCFG0, 6U),
    kPDRUNCFG_PD_BOD_RESET = MAKE_PD_BITS(PDRCFG0, 7U),
    kPDRUNCFG_PD_BOD_INTR = MAKE_PD_BITS(PDRCFG0, 8U),
    kPDRUNCFG_PD_ADC0 = MAKE_PD_BITS(PDRCFG0, 10U),
    kPDRUNCFG_PD_VDDFLASH = MAKE_PD_BITS(PDRCFG0, 11U),
    kPDRUNCFG_LP_VDDFLASH = MAKE_PD_BITS(PDRCFG0, 12U),
    kPDRUNCFG_PD_RAM0 = MAKE_PD_BITS(PDRCFG0, 13U),
    kPDRUNCFG_PD_RAM1 = MAKE_PD_BITS(PDRCFG0, 14U),
    kPDRUNCFG_PD_RAM2 = MAKE_PD_BITS(PDRCFG0, 15U),
    kPDRUNCFG_PD_RAMX = MAKE_PD_BITS(PDRCFG0, 16U),
    kPDRUNCFG_PD_ROM = MAKE_PD_BITS(PDRCFG0, 17U),
    kPDRUNCFG_PD_VDDHV_ENA = MAKE_PD_BITS(PDRCFG0, 18U),
    kPDRUNCFG_PD_VD7_ENA = MAKE_PD_BITS(PDRCFG0, 19U),
    kPDRUNCFG_PD_WDT_OSC = MAKE_PD_BITS(PDRCFG0, 20U),
    kPDRUNCFG_PD_USB0_PHY = MAKE_PD_BITS(PDRCFG0, 21U),
    kPDRUNCFG_PD_SYS_PLL0 = MAKE_PD_BITS(PDRCFG0, 22U),
    kPDRUNCFG_PD_VREFP_SW = MAKE_PD_BITS(PDRCFG0, 23U),
    kPDRUNCFG_PD_FLASH_BG = MAKE_PD_BITS(PDRCFG0, 25U),

    kPDRUNCFG_PD_ALT_FLASH_IBG = MAKE_PD_BITS(PDRCFG1, 28U),
    kPDRUNCFG_SEL_ALT_FLASH_IBG = MAKE_PD_BITS(PDRCFG1, 29U),

    /*
    This enum member has no practical meaning,it is used to avoid MISRA issue,
    user should not trying to use it.
    */
    kPDRUNCFG_ForceUnsigned = (int)0x80000000U
} pd_bit_t;

/* Power mode configuration API parameter */
typedef enum _power_mode_config
{
    kPmu_Sleep = 0U,
    kPmu_Deep_Sleep = 1U,
    kPmu_Deep_PowerDown = 2U,
} power_mode_cfg_t;

/*******************************************************************************
 * API
 ******************************************************************************/

#ifdef __cplusplus
extern "C" {
#endif

/*!
* @name Power Configuration
* @{
*/

/*!
 * @brief API to enable PDRUNCFG bit in the Syscon. Note that enabling the bit powers down the peripheral
 *
 * @param en    peripheral for which to enable the PDRUNCFG bit
 * @return none
 */
static inline void POWER_EnablePD(pd_bit_t en)
{
    /* PDRUNCFGSET */
    SYSCON->PDRUNCFGSET[((uint32_t)en >> 8UL)] = (1UL << ((uint32_t)en & 0xffU));
}

/*!
 * @brief API to disable PDRUNCFG bit in the Syscon. Note that disabling the bit powers up the peripheral
 *
 * @param en    peripheral for which to disable the PDRUNCFG bit
 * @return none
 */
static inline void POWER_DisablePD(pd_bit_t en)
{
    /* PDRUNCFGCLR */
    SYSCON->PDRUNCFGCLR[((uint32_t)en >> 8UL)] = (1UL << ((uint32_t)en & 0xffU));
}

/*!
 * @brief API to enable deep sleep bit in the ARM Core.
 *
 * @return none
 */
static inline void POWER_EnableDeepSleep(void)
{
    SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
}

/*!
 * @brief API to disable deep sleep bit in the ARM Core.
 *
 * @return none
 */
static inline void POWER_DisableDeepSleep(void)
{
    SCB->SCR &= ~SCB_SCR_SLEEPDEEP_Msk;
}

/*!
 * @brief API to power down flash controller.
 *
 * @return none
 */
static inline void POWER_PowerDownFlash(void)
{
    /* note, we retain flash trim to make waking back up faster */
    SYSCON->PDRUNCFGSET[0] =
        SYSCON_PDRUNCFG_LP_VDDFLASH_MASK | SYSCON_PDRUNCFG_PD_VDDHV_ENA_MASK | SYSCON_PDRUNCFG_PD_FLASH_BG_MASK;

#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
    /* TURN OFF clock for Flash Controller (only needed for FLASH programming, will be turned on by ROM API) */
    CLOCK_DisableClock(kCLOCK_Flash);

    /* TURN OFF clock for Flash Accelerator */
    CLOCK_DisableClock(kCLOCK_Fmc);
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
}

/*!
 * @brief API to power up flash controller.
 *
 * @return none
 */
static inline void POWER_PowerUpFlash(void)
{
    SYSCON->PDRUNCFGCLR[0] = SYSCON_PDRUNCFG_LP_VDDFLASH_MASK | SYSCON_PDRUNCFG_PD_VDDHV_ENA_MASK;

#if !(defined(FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL) && FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL)
    /* TURN ON clock for flash Accelerator */
    CLOCK_EnableClock(kCLOCK_Fmc);

    /* TURN ON clock for flash Controller */
    CLOCK_EnableClock(kCLOCK_Flash);
#endif /* FSL_SDK_DISABLE_DRIVER_CLOCK_CONTROL */
}

/*!
 * @brief Power Library API to enter different power mode.
 *
 * @param mode Power mode.
 * @param exclude_from_pd  Bit mask of the PDRUNCFG bits that needs to be powered on during deep sleep
 * @return none
 */
void POWER_EnterPowerMode(power_mode_cfg_t mode, uint64_t exclude_from_pd);

/*!
 * @brief Power Library API to enter sleep mode.
 *
 * @return none
 */
void POWER_EnterSleep(void);

/*!
 * @brief Power Library API to enter deep sleep mode.
 *
 * @param exclude_from_pd  Bit mask of the PDRUNCFG bits that needs to be powered on during deep sleep
 * @return none
 */
void POWER_EnterDeepSleep(uint64_t exclude_from_pd);

/*!
 * @brief Power Library API to enter deep power down mode.
 *
 * @param exclude_from_pd  Bit mask of the PDRUNCFG bits that needs to be powered on during deep power down mode,
 *                         but this is has no effect as the voltages are cut off.
 * @return none
 */
void POWER_EnterDeepPowerDown(uint64_t exclude_from_pd);

/*!
 * @brief Power Library API to choose normal regulation and set the voltage for the desired operating frequency.
 *
 * @param freq  - The desired frequency at which the part would like to operate,
 *                note that the voltage and flash wait states should be set before changing frequency
 * @return none
 */
void POWER_SetVoltageForFreq(uint32_t freq);

/*!
 * @brief Power Library API to choose low power regulation and set the voltage for the desired operating frequency.
 *
 * @param freq  - The desired frequency at which the part would like to operate,
 *                note only 12MHz and 48Mhz are supported
 * @return none
 */
void POWER_SetLowPowerVoltageForFreq(uint32_t freq);

/*!
 * @brief Power Library API to return the library version.
 *
 * @return version number of the power library
 */
uint32_t POWER_GetLibVersion(void);

/* @} */

#ifdef __cplusplus
}
#endif

/*! @} */

#endif /* _FSL_POWER_H_ */