// Copyright 2020 Espressif Systems (Shanghai) PTE LTD // // Licensed under the Apache License, Version 2.0 (the "License"); // you may not use this file except in compliance with the License. // You may obtain a copy of the License at // // http://www.apache.org/licenses/LICENSE-2.0 // // Unless required by applicable law or agreed to in writing, software // distributed under the License is distributed on an "AS IS" BASIS, // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. #ifndef _SOC_RTC_CNTL_REG_H_ #define _SOC_RTC_CNTL_REG_H_ /* The value that needs to be written to RTC_CNTL_WDT_WKEY to write-enable the wdt registers */ #define RTC_CNTL_WDT_WKEY_VALUE 0x50D83AA1 /* The value that needs to be written to RTC_CNTL_SWD_WPROTECT_REG to write-enable the wdt registers */ #define RTC_CNTL_SWD_WKEY_VALUE 0x8F1D312A /* Possible values for RTC_CNTL_WDT_CPU_RESET_LENGTH and RTC_CNTL_WDT_SYS_RESET_LENGTH */ #define RTC_WDT_RESET_LENGTH_100_NS 0 #define RTC_WDT_RESET_LENGTH_200_NS 1 #define RTC_WDT_RESET_LENGTH_300_NS 2 #define RTC_WDT_RESET_LENGTH_400_NS 3 #define RTC_WDT_RESET_LENGTH_500_NS 4 #define RTC_WDT_RESET_LENGTH_800_NS 5 #define RTC_WDT_RESET_LENGTH_1600_NS 6 #define RTC_WDT_RESET_LENGTH_3200_NS 7 #ifdef __cplusplus extern "C" { #endif #include "soc.h" #define RTC_CNTL_TIME0_REG RTC_CNTL_TIME_LOW0_REG #define RTC_CNTL_TIME1_REG RTC_CNTL_TIME_HIGH0_REG #define RTC_CNTL_OPTIONS0_REG (DR_REG_RTCCNTL_BASE + 0x0000) /* RTC_CNTL_SW_SYS_RST : WO ;bitpos:[31] ;default: 1'd0 ; */ /*description: SW system reset*/ #define RTC_CNTL_SW_SYS_RST (BIT(31)) #define RTC_CNTL_SW_SYS_RST_M (BIT(31)) #define RTC_CNTL_SW_SYS_RST_V 0x1 #define RTC_CNTL_SW_SYS_RST_S 31 /* RTC_CNTL_DG_WRAP_FORCE_NORST : R/W ;bitpos:[30] ;default: 1'd0 ; */ /*description: digital core force no reset in deep sleep*/ #define RTC_CNTL_DG_WRAP_FORCE_NORST (BIT(30)) #define RTC_CNTL_DG_WRAP_FORCE_NORST_M (BIT(30)) #define RTC_CNTL_DG_WRAP_FORCE_NORST_V 0x1 #define RTC_CNTL_DG_WRAP_FORCE_NORST_S 30 /* RTC_CNTL_DG_WRAP_FORCE_RST : R/W ;bitpos:[29] ;default: 1'd0 ; */ /*description: digital wrap force reset in deep sleep*/ #define RTC_CNTL_DG_WRAP_FORCE_RST (BIT(29)) #define RTC_CNTL_DG_WRAP_FORCE_RST_M (BIT(29)) #define RTC_CNTL_DG_WRAP_FORCE_RST_V 0x1 #define RTC_CNTL_DG_WRAP_FORCE_RST_S 29 /* RTC_CNTL_ANALOG_FORCE_NOISO : R/W ;bitpos:[28] ;default: 1'd1 ; */ /*description: */ #define RTC_CNTL_ANALOG_FORCE_NOISO (BIT(28)) #define RTC_CNTL_ANALOG_FORCE_NOISO_M (BIT(28)) #define RTC_CNTL_ANALOG_FORCE_NOISO_V 0x1 #define RTC_CNTL_ANALOG_FORCE_NOISO_S 28 /* RTC_CNTL_PLL_FORCE_NOISO : R/W ;bitpos:[27] ;default: 1'd1 ; */ /*description: */ #define RTC_CNTL_PLL_FORCE_NOISO (BIT(27)) #define RTC_CNTL_PLL_FORCE_NOISO_M (BIT(27)) #define RTC_CNTL_PLL_FORCE_NOISO_V 0x1 #define RTC_CNTL_PLL_FORCE_NOISO_S 27 /* RTC_CNTL_XTL_FORCE_NOISO : R/W ;bitpos:[26] ;default: 1'd1 ; */ /*description: */ #define RTC_CNTL_XTL_FORCE_NOISO (BIT(26)) #define RTC_CNTL_XTL_FORCE_NOISO_M (BIT(26)) #define RTC_CNTL_XTL_FORCE_NOISO_V 0x1 #define RTC_CNTL_XTL_FORCE_NOISO_S 26 /* RTC_CNTL_ANALOG_FORCE_ISO : R/W ;bitpos:[25] ;default: 1'd0 ; */ /*description: */ #define RTC_CNTL_ANALOG_FORCE_ISO (BIT(25)) #define RTC_CNTL_ANALOG_FORCE_ISO_M (BIT(25)) #define RTC_CNTL_ANALOG_FORCE_ISO_V 0x1 #define RTC_CNTL_ANALOG_FORCE_ISO_S 25 /* RTC_CNTL_PLL_FORCE_ISO : R/W ;bitpos:[24] ;default: 1'd0 ; */ /*description: */ #define RTC_CNTL_PLL_FORCE_ISO (BIT(24)) #define RTC_CNTL_PLL_FORCE_ISO_M (BIT(24)) #define RTC_CNTL_PLL_FORCE_ISO_V 0x1 #define RTC_CNTL_PLL_FORCE_ISO_S 24 /* RTC_CNTL_XTL_FORCE_ISO : R/W ;bitpos:[23] ;default: 1'd0 ; */ /*description: */ #define RTC_CNTL_XTL_FORCE_ISO (BIT(23)) #define RTC_CNTL_XTL_FORCE_ISO_M (BIT(23)) #define RTC_CNTL_XTL_FORCE_ISO_V 0x1 #define RTC_CNTL_XTL_FORCE_ISO_S 23 /* RTC_CNTL_XTL_EXT_CTR_SEL : R/W ;bitpos:[22:20] ;default: 3'd0 ; */ /*description: */ #define RTC_CNTL_XTL_EXT_CTR_SEL 0x00000007 #define RTC_CNTL_XTL_EXT_CTR_SEL_M ((RTC_CNTL_XTL_EXT_CTR_SEL_V)<<(RTC_CNTL_XTL_EXT_CTR_SEL_S)) #define RTC_CNTL_XTL_EXT_CTR_SEL_V 0x7 #define RTC_CNTL_XTL_EXT_CTR_SEL_S 20 /* RTC_CNTL_XTL_EN_WAIT : R/W ;bitpos:[17:14] ;default: 4'd2 ; */ /*description: wait bias_sleep and current source wakeup*/ #define RTC_CNTL_XTL_EN_WAIT 0x0000000F #define RTC_CNTL_XTL_EN_WAIT_M ((RTC_CNTL_XTL_EN_WAIT_V)<<(RTC_CNTL_XTL_EN_WAIT_S)) #define RTC_CNTL_XTL_EN_WAIT_V 0xF #define RTC_CNTL_XTL_EN_WAIT_S 14 /* RTC_CNTL_XTL_FORCE_PU : R/W ;bitpos:[13] ;default: 1'd1 ; */ /*description: crystall force power up*/ #define RTC_CNTL_XTL_FORCE_PU (BIT(13)) #define RTC_CNTL_XTL_FORCE_PU_M (BIT(13)) #define RTC_CNTL_XTL_FORCE_PU_V 0x1 #define RTC_CNTL_XTL_FORCE_PU_S 13 /* RTC_CNTL_XTL_FORCE_PD : R/W ;bitpos:[12] ;default: 1'b0 ; */ /*description: crystall force power down*/ #define RTC_CNTL_XTL_FORCE_PD (BIT(12)) #define RTC_CNTL_XTL_FORCE_PD_M (BIT(12)) #define RTC_CNTL_XTL_FORCE_PD_V 0x1 #define RTC_CNTL_XTL_FORCE_PD_S 12 /* RTC_CNTL_BBPLL_FORCE_PU : R/W ;bitpos:[11] ;default: 1'd0 ; */ /*description: BB_PLL force power up*/ #define RTC_CNTL_BBPLL_FORCE_PU (BIT(11)) #define RTC_CNTL_BBPLL_FORCE_PU_M (BIT(11)) #define RTC_CNTL_BBPLL_FORCE_PU_V 0x1 #define RTC_CNTL_BBPLL_FORCE_PU_S 11 /* RTC_CNTL_BBPLL_FORCE_PD : R/W ;bitpos:[10] ;default: 1'b0 ; */ /*description: BB_PLL force power down*/ #define RTC_CNTL_BBPLL_FORCE_PD (BIT(10)) #define RTC_CNTL_BBPLL_FORCE_PD_M (BIT(10)) #define RTC_CNTL_BBPLL_FORCE_PD_V 0x1 #define RTC_CNTL_BBPLL_FORCE_PD_S 10 /* RTC_CNTL_BBPLL_I2C_FORCE_PU : R/W ;bitpos:[9] ;default: 1'd0 ; */ /*description: BB_PLL_I2C force power up*/ #define RTC_CNTL_BBPLL_I2C_FORCE_PU (BIT(9)) #define RTC_CNTL_BBPLL_I2C_FORCE_PU_M (BIT(9)) #define RTC_CNTL_BBPLL_I2C_FORCE_PU_V 0x1 #define RTC_CNTL_BBPLL_I2C_FORCE_PU_S 9 /* RTC_CNTL_BBPLL_I2C_FORCE_PD : R/W ;bitpos:[8] ;default: 1'b0 ; */ /*description: BB_PLL _I2C force power down*/ #define RTC_CNTL_BBPLL_I2C_FORCE_PD (BIT(8)) #define RTC_CNTL_BBPLL_I2C_FORCE_PD_M (BIT(8)) #define RTC_CNTL_BBPLL_I2C_FORCE_PD_V 0x1 #define RTC_CNTL_BBPLL_I2C_FORCE_PD_S 8 /* RTC_CNTL_BB_I2C_FORCE_PU : R/W ;bitpos:[7] ;default: 1'd0 ; */ /*description: BB_I2C force power up*/ #define RTC_CNTL_BB_I2C_FORCE_PU (BIT(7)) #define RTC_CNTL_BB_I2C_FORCE_PU_M (BIT(7)) #define RTC_CNTL_BB_I2C_FORCE_PU_V 0x1 #define RTC_CNTL_BB_I2C_FORCE_PU_S 7 /* RTC_CNTL_BB_I2C_FORCE_PD : R/W ;bitpos:[6] ;default: 1'b0 ; */ /*description: BB_I2C force power down*/ #define RTC_CNTL_BB_I2C_FORCE_PD (BIT(6)) #define RTC_CNTL_BB_I2C_FORCE_PD_M (BIT(6)) #define RTC_CNTL_BB_I2C_FORCE_PD_V 0x1 #define RTC_CNTL_BB_I2C_FORCE_PD_S 6 /* RTC_CNTL_SW_PROCPU_RST : WO ;bitpos:[5] ;default: 1'b0 ; */ /*description: PRO CPU SW reset*/ #define RTC_CNTL_SW_PROCPU_RST (BIT(5)) #define RTC_CNTL_SW_PROCPU_RST_M (BIT(5)) #define RTC_CNTL_SW_PROCPU_RST_V 0x1 #define RTC_CNTL_SW_PROCPU_RST_S 5 /* RTC_CNTL_SW_APPCPU_RST : WO ;bitpos:[4] ;default: 1'b0 ; */ /*description: APP CPU SW reset*/ #define RTC_CNTL_SW_APPCPU_RST (BIT(4)) #define RTC_CNTL_SW_APPCPU_RST_M (BIT(4)) #define RTC_CNTL_SW_APPCPU_RST_V 0x1 #define RTC_CNTL_SW_APPCPU_RST_S 4 /* RTC_CNTL_SW_STALL_PROCPU_C0 : R/W ;bitpos:[3:2] ;default: 2'b0 ; */ /*description: {reg_sw_stall_procpu_c1[5:0] reg_sw_stall_procpu_c0[1:0]} == 0x86 will stall PRO CPU*/ #define RTC_CNTL_SW_STALL_PROCPU_C0 0x00000003 #define RTC_CNTL_SW_STALL_PROCPU_C0_M ((RTC_CNTL_SW_STALL_PROCPU_C0_V)<<(RTC_CNTL_SW_STALL_PROCPU_C0_S)) #define RTC_CNTL_SW_STALL_PROCPU_C0_V 0x3 #define RTC_CNTL_SW_STALL_PROCPU_C0_S 2 /* RTC_CNTL_SW_STALL_APPCPU_C0 : R/W ;bitpos:[1:0] ;default: 2'b0 ; */ /*description: {reg_sw_stall_appcpu_c1[5:0] reg_sw_stall_appcpu_c0[1:0]} == 0x86 will stall APP CPU*/ #define RTC_CNTL_SW_STALL_APPCPU_C0 0x00000003 #define RTC_CNTL_SW_STALL_APPCPU_C0_M ((RTC_CNTL_SW_STALL_APPCPU_C0_V)<<(RTC_CNTL_SW_STALL_APPCPU_C0_S)) #define RTC_CNTL_SW_STALL_APPCPU_C0_V 0x3 #define RTC_CNTL_SW_STALL_APPCPU_C0_S 0 #define RTC_CNTL_SLP_TIMER0_REG (DR_REG_RTCCNTL_BASE + 0x0004) /* RTC_CNTL_SLP_VAL_LO : R/W ;bitpos:[31:0] ;default: 32'h0 ; */ /*description: */ #define RTC_CNTL_SLP_VAL_LO 0xFFFFFFFF #define RTC_CNTL_SLP_VAL_LO_M ((RTC_CNTL_SLP_VAL_LO_V)<<(RTC_CNTL_SLP_VAL_LO_S)) #define RTC_CNTL_SLP_VAL_LO_V 0xFFFFFFFF #define RTC_CNTL_SLP_VAL_LO_S 0 #define RTC_CNTL_SLP_TIMER1_REG (DR_REG_RTCCNTL_BASE + 0x0008) /* RTC_CNTL_MAIN_TIMER_ALARM_EN : WO ;bitpos:[16] ;default: 1'h0 ; */ /*description: timer alarm enable bit*/ #define RTC_CNTL_MAIN_TIMER_ALARM_EN (BIT(16)) #define RTC_CNTL_MAIN_TIMER_ALARM_EN_M (BIT(16)) #define RTC_CNTL_MAIN_TIMER_ALARM_EN_V 0x1 #define RTC_CNTL_MAIN_TIMER_ALARM_EN_S 16 /* RTC_CNTL_SLP_VAL_HI : R/W ;bitpos:[15:0] ;default: 16'h0 ; */ /*description: RTC sleep timer high 16 bits*/ #define RTC_CNTL_SLP_VAL_HI 0x0000FFFF #define RTC_CNTL_SLP_VAL_HI_M ((RTC_CNTL_SLP_VAL_HI_V)<<(RTC_CNTL_SLP_VAL_HI_S)) #define RTC_CNTL_SLP_VAL_HI_V 0xFFFF #define RTC_CNTL_SLP_VAL_HI_S 0 #define RTC_CNTL_TIME_UPDATE_REG (DR_REG_RTCCNTL_BASE + 0x000C) /* RTC_CNTL_TIME_UPDATE : WO ;bitpos:[31] ;default: 1'h0 ; */ /*description: Set 1: to update register with RTC timer*/ #define RTC_CNTL_TIME_UPDATE (BIT(31)) #define RTC_CNTL_TIME_UPDATE_M (BIT(31)) #define RTC_CNTL_TIME_UPDATE_V 0x1 #define RTC_CNTL_TIME_UPDATE_S 31 /* RTC_CNTL_TIMER_SYS_RST : R/W ;bitpos:[29] ;default: 1'b0 ; */ /*description: enable to record system reset time*/ #define RTC_CNTL_TIMER_SYS_RST (BIT(29)) #define RTC_CNTL_TIMER_SYS_RST_M (BIT(29)) #define RTC_CNTL_TIMER_SYS_RST_V 0x1 #define RTC_CNTL_TIMER_SYS_RST_S 29 /* RTC_CNTL_TIMER_XTL_OFF : R/W ;bitpos:[28] ;default: 1'b0 ; */ /*description: Enable to record 40M XTAL OFF time*/ #define RTC_CNTL_TIMER_XTL_OFF (BIT(28)) #define RTC_CNTL_TIMER_XTL_OFF_M (BIT(28)) #define RTC_CNTL_TIMER_XTL_OFF_V 0x1 #define RTC_CNTL_TIMER_XTL_OFF_S 28 /* RTC_CNTL_TIMER_SYS_STALL : R/W ;bitpos:[27] ;default: 1'b0 ; */ /*description: Enable to record system stall time*/ #define RTC_CNTL_TIMER_SYS_STALL (BIT(27)) #define RTC_CNTL_TIMER_SYS_STALL_M (BIT(27)) #define RTC_CNTL_TIMER_SYS_STALL_V 0x1 #define RTC_CNTL_TIMER_SYS_STALL_S 27 #define RTC_CNTL_TIME_LOW0_REG (DR_REG_RTCCNTL_BASE + 0x0010) /* RTC_CNTL_TIMER_VALUE0_LOW : RO ;bitpos:[31:0] ;default: 32'h0 ; */ /*description: RTC timer low 32 bits*/ #define RTC_CNTL_TIMER_VALUE0_LOW 0xFFFFFFFF #define RTC_CNTL_TIMER_VALUE0_LOW_M ((RTC_CNTL_TIMER_VALUE0_LOW_V)<<(RTC_CNTL_TIMER_VALUE0_LOW_S)) #define RTC_CNTL_TIMER_VALUE0_LOW_V 0xFFFFFFFF #define RTC_CNTL_TIMER_VALUE0_LOW_S 0 #define RTC_CNTL_TIME_HIGH0_REG (DR_REG_RTCCNTL_BASE + 0x0014) /* RTC_CNTL_TIMER_VALUE0_HIGH : RO ;bitpos:[15:0] ;default: 16'h0 ; */ /*description: RTC timer high 16 bits*/ #define RTC_CNTL_TIMER_VALUE0_HIGH 0x0000FFFF #define RTC_CNTL_TIMER_VALUE0_HIGH_M ((RTC_CNTL_TIMER_VALUE0_HIGH_V)<<(RTC_CNTL_TIMER_VALUE0_HIGH_S)) #define RTC_CNTL_TIMER_VALUE0_HIGH_V 0xFFFF #define RTC_CNTL_TIMER_VALUE0_HIGH_S 0 #define RTC_CNTL_STATE0_REG (DR_REG_RTCCNTL_BASE + 0x0018) /* RTC_CNTL_SLEEP_EN : R/W ;bitpos:[31] ;default: 1'd0 ; */ /*description: sleep enable bit*/ #define RTC_CNTL_SLEEP_EN (BIT(31)) #define RTC_CNTL_SLEEP_EN_M (BIT(31)) #define RTC_CNTL_SLEEP_EN_V 0x1 #define RTC_CNTL_SLEEP_EN_S 31 /* RTC_CNTL_SLP_REJECT : R/W ;bitpos:[30] ;default: 1'd0 ; */ /*description: leep reject bit*/ #define RTC_CNTL_SLP_REJECT (BIT(30)) #define RTC_CNTL_SLP_REJECT_M (BIT(30)) #define RTC_CNTL_SLP_REJECT_V 0x1 #define RTC_CNTL_SLP_REJECT_S 30 /* RTC_CNTL_SLP_WAKEUP : R/W ;bitpos:[29] ;default: 1'd0 ; */ /*description: leep wakeup bit*/ #define RTC_CNTL_SLP_WAKEUP (BIT(29)) #define RTC_CNTL_SLP_WAKEUP_M (BIT(29)) #define RTC_CNTL_SLP_WAKEUP_V 0x1 #define RTC_CNTL_SLP_WAKEUP_S 29 /* RTC_CNTL_SDIO_ACTIVE_IND : RO ;bitpos:[28] ;default: 1'd0 ; */ /*description: SDIO active indication*/ #define RTC_CNTL_SDIO_ACTIVE_IND (BIT(28)) #define RTC_CNTL_SDIO_ACTIVE_IND_M (BIT(28)) #define RTC_CNTL_SDIO_ACTIVE_IND_V 0x1 #define RTC_CNTL_SDIO_ACTIVE_IND_S 28 /* RTC_CNTL_APB2RTC_BRIDGE_SEL : R/W ;bitpos:[22] ;default: 1'd0 ; */ /*description: 1: APB to RTC using bridge*/ #define RTC_CNTL_APB2RTC_BRIDGE_SEL (BIT(22)) #define RTC_CNTL_APB2RTC_BRIDGE_SEL_M (BIT(22)) #define RTC_CNTL_APB2RTC_BRIDGE_SEL_V 0x1 #define RTC_CNTL_APB2RTC_BRIDGE_SEL_S 22 /* RTC_CNTL_SLP_REJECT_CAUSE_CLR : WO ;bitpos:[1] ;default: 1'b0 ; */ /*description: clear rtc sleep reject cause*/ #define RTC_CNTL_SLP_REJECT_CAUSE_CLR (BIT(1)) #define RTC_CNTL_SLP_REJECT_CAUSE_CLR_M (BIT(1)) #define RTC_CNTL_SLP_REJECT_CAUSE_CLR_V 0x1 #define RTC_CNTL_SLP_REJECT_CAUSE_CLR_S 1 /* RTC_CNTL_SW_CPU_INT : WO ;bitpos:[0] ;default: 1'b0 ; */ /*description: rtc software interrupt to main cpu*/ #define RTC_CNTL_SW_CPU_INT (BIT(0)) #define RTC_CNTL_SW_CPU_INT_M (BIT(0)) #define RTC_CNTL_SW_CPU_INT_V 0x1 #define RTC_CNTL_SW_CPU_INT_S 0 #define RTC_CNTL_TIMER1_REG (DR_REG_RTCCNTL_BASE + 0x001C) /* RTC_CNTL_PLL_BUF_WAIT : R/W ;bitpos:[31:24] ;default: 8'd40 ; */ /*description: PLL wait cycles in slow_clk_rtc*/ #define RTC_CNTL_PLL_BUF_WAIT 0x000000FF #define RTC_CNTL_PLL_BUF_WAIT_M ((RTC_CNTL_PLL_BUF_WAIT_V)<<(RTC_CNTL_PLL_BUF_WAIT_S)) #define RTC_CNTL_PLL_BUF_WAIT_V 0xFF #define RTC_CNTL_PLL_BUF_WAIT_S 24 #define RTC_CNTL_PLL_BUF_WAIT_DEFAULT 20 /* RTC_CNTL_XTL_BUF_WAIT : R/W ;bitpos:[23:14] ;default: 10'd80 ; */ /*description: XTAL wait cycles in slow_clk_rtc*/ #define RTC_CNTL_XTL_BUF_WAIT 0x000003FF #define RTC_CNTL_XTL_BUF_WAIT_M ((RTC_CNTL_XTL_BUF_WAIT_V)<<(RTC_CNTL_XTL_BUF_WAIT_S)) #define RTC_CNTL_XTL_BUF_WAIT_V 0x3FF #define RTC_CNTL_XTL_BUF_WAIT_S 14 #define RTC_CNTL_XTL_BUF_WAIT_DEFAULT 100 /* RTC_CNTL_CK8M_WAIT : R/W ;bitpos:[13:6] ;default: 8'h10 ; */ /*description: CK8M wait cycles in slow_clk_rtc*/ #define RTC_CNTL_CK8M_WAIT 0x000000FF #define RTC_CNTL_CK8M_WAIT_M ((RTC_CNTL_CK8M_WAIT_V)<<(RTC_CNTL_CK8M_WAIT_S)) #define RTC_CNTL_CK8M_WAIT_V 0xFF #define RTC_CNTL_CK8M_WAIT_S 6 #define RTC_CNTL_CK8M_WAIT_DEFAULT 20 /* RTC_CNTL_CPU_STALL_WAIT : R/W ;bitpos:[5:1] ;default: 5'd1 ; */ /*description: CPU stall wait cycles in fast_clk_rtc*/ #define RTC_CNTL_CPU_STALL_WAIT 0x0000001F #define RTC_CNTL_CPU_STALL_WAIT_M ((RTC_CNTL_CPU_STALL_WAIT_V)<<(RTC_CNTL_CPU_STALL_WAIT_S)) #define RTC_CNTL_CPU_STALL_WAIT_V 0x1F #define RTC_CNTL_CPU_STALL_WAIT_S 1 /* RTC_CNTL_CPU_STALL_EN : R/W ;bitpos:[0] ;default: 1'd1 ; */ /*description: CPU stall enable bit*/ #define RTC_CNTL_CPU_STALL_EN (BIT(0)) #define RTC_CNTL_CPU_STALL_EN_M (BIT(0)) #define RTC_CNTL_CPU_STALL_EN_V 0x1 #define RTC_CNTL_CPU_STALL_EN_S 0 #define RTC_CNTL_TIMER2_REG (DR_REG_RTCCNTL_BASE + 0x0020) /* RTC_CNTL_MIN_TIME_CK8M_OFF : R/W ;bitpos:[31:24] ;default: 8'h1 ; */ /*description: minimal cycles in slow_clk_rtc for CK8M in power down state*/ #define RTC_CNTL_MIN_TIME_CK8M_OFF 0x000000FF #define RTC_CNTL_MIN_TIME_CK8M_OFF_M ((RTC_CNTL_MIN_TIME_CK8M_OFF_V)<<(RTC_CNTL_MIN_TIME_CK8M_OFF_S)) #define RTC_CNTL_MIN_TIME_CK8M_OFF_V 0xFF #define RTC_CNTL_MIN_TIME_CK8M_OFF_S 24 #define RTC_CNTL_TIMER3_REG (DR_REG_RTCCNTL_BASE + 0x0024) /* RTC_CNTL_BT_POWERUP_TIMER : R/W ;bitpos:[31:25] ;default: 7'h5 ; */ /*description: */ #define RTC_CNTL_BT_POWERUP_TIMER 0x0000007F #define RTC_CNTL_BT_POWERUP_TIMER_M ((RTC_CNTL_BT_POWERUP_TIMER_V)<<(RTC_CNTL_BT_POWERUP_TIMER_S)) #define RTC_CNTL_BT_POWERUP_TIMER_V 0x7F #define RTC_CNTL_BT_POWERUP_TIMER_S 25 /* RTC_CNTL_BT_WAIT_TIMER : R/W ;bitpos:[24:16] ;default: 9'h8 ; */ /*description: */ #define RTC_CNTL_BT_WAIT_TIMER 0x000001FF #define RTC_CNTL_BT_WAIT_TIMER_M ((RTC_CNTL_BT_WAIT_TIMER_V)<<(RTC_CNTL_BT_WAIT_TIMER_S)) #define RTC_CNTL_BT_WAIT_TIMER_V 0x1FF #define RTC_CNTL_BT_WAIT_TIMER_S 16 /* RTC_CNTL_WIFI_POWERUP_TIMER : R/W ;bitpos:[15:9] ;default: 7'h5 ; */ /*description: */ #define RTC_CNTL_WIFI_POWERUP_TIMER 0x0000007F #define RTC_CNTL_WIFI_POWERUP_TIMER_M ((RTC_CNTL_WIFI_POWERUP_TIMER_V)<<(RTC_CNTL_WIFI_POWERUP_TIMER_S)) #define RTC_CNTL_WIFI_POWERUP_TIMER_V 0x7F #define RTC_CNTL_WIFI_POWERUP_TIMER_S 9 /* RTC_CNTL_WIFI_WAIT_TIMER : R/W ;bitpos:[8:0] ;default: 9'h8 ; */ /*description: */ #define RTC_CNTL_WIFI_WAIT_TIMER 0x000001FF #define RTC_CNTL_WIFI_WAIT_TIMER_M ((RTC_CNTL_WIFI_WAIT_TIMER_V)<<(RTC_CNTL_WIFI_WAIT_TIMER_S)) #define RTC_CNTL_WIFI_WAIT_TIMER_V 0x1FF #define RTC_CNTL_WIFI_WAIT_TIMER_S 0 #define RTC_CNTL_TIMER4_REG (DR_REG_RTCCNTL_BASE + 0x0028) /* RTC_CNTL_DG_WRAP_POWERUP_TIMER : R/W ;bitpos:[31:25] ;default: 7'h8 ; */ /*description: */ #define RTC_CNTL_DG_WRAP_POWERUP_TIMER 0x0000007F #define RTC_CNTL_DG_WRAP_POWERUP_TIMER_M ((RTC_CNTL_DG_WRAP_POWERUP_TIMER_V)<<(RTC_CNTL_DG_WRAP_POWERUP_TIMER_S)) #define RTC_CNTL_DG_WRAP_POWERUP_TIMER_V 0x7F #define RTC_CNTL_DG_WRAP_POWERUP_TIMER_S 25 /* RTC_CNTL_DG_WRAP_WAIT_TIMER : R/W ;bitpos:[24:16] ;default: 9'h20 ; */ /*description: */ #define RTC_CNTL_DG_WRAP_WAIT_TIMER 0x000001FF #define RTC_CNTL_DG_WRAP_WAIT_TIMER_M ((RTC_CNTL_DG_WRAP_WAIT_TIMER_V)<<(RTC_CNTL_DG_WRAP_WAIT_TIMER_S)) #define RTC_CNTL_DG_WRAP_WAIT_TIMER_V 0x1FF #define RTC_CNTL_DG_WRAP_WAIT_TIMER_S 16 /* RTC_CNTL_CPU_TOP_POWERUP_TIMER : R/W ;bitpos:[15:9] ;default: 7'h5 ; */ /*description: */ #define RTC_CNTL_CPU_TOP_POWERUP_TIMER 0x0000007F #define RTC_CNTL_CPU_TOP_POWERUP_TIMER_M ((RTC_CNTL_CPU_TOP_POWERUP_TIMER_V)<<(RTC_CNTL_CPU_TOP_POWERUP_TIMER_S)) #define RTC_CNTL_CPU_TOP_POWERUP_TIMER_V 0x7F #define RTC_CNTL_CPU_TOP_POWERUP_TIMER_S 9 /* RTC_CNTL_CPU_TOP_WAIT_TIMER : R/W ;bitpos:[8:0] ;default: 9'h8 ; */ /*description: */ #define RTC_CNTL_CPU_TOP_WAIT_TIMER 0x000001FF #define RTC_CNTL_CPU_TOP_WAIT_TIMER_M ((RTC_CNTL_CPU_TOP_WAIT_TIMER_V)<<(RTC_CNTL_CPU_TOP_WAIT_TIMER_S)) #define RTC_CNTL_CPU_TOP_WAIT_TIMER_V 0x1FF #define RTC_CNTL_CPU_TOP_WAIT_TIMER_S 0 #define RTC_CNTL_TIMER5_REG (DR_REG_RTCCNTL_BASE + 0x002C) /* RTC_CNTL_MIN_SLP_VAL : R/W ;bitpos:[15:8] ;default: 8'h80 ; */ /*description: minimal sleep cycles in slow_clk_rtc*/ #define RTC_CNTL_MIN_SLP_VAL 0x000000FF #define RTC_CNTL_MIN_SLP_VAL_M ((RTC_CNTL_MIN_SLP_VAL_V)<<(RTC_CNTL_MIN_SLP_VAL_S)) #define RTC_CNTL_MIN_SLP_VAL_V 0xFF #define RTC_CNTL_MIN_SLP_VAL_S 8 #define RTC_CNTL_MIN_SLP_VAL_MIN 2 #define RTC_CNTL_TIMER6_REG (DR_REG_RTCCNTL_BASE + 0x0030) /* RTC_CNTL_DG_PERI_POWERUP_TIMER : R/W ;bitpos:[31:25] ;default: 7'h5 ; */ /*description: */ #define RTC_CNTL_DG_PERI_POWERUP_TIMER 0x0000007F #define RTC_CNTL_DG_PERI_POWERUP_TIMER_M ((RTC_CNTL_DG_PERI_POWERUP_TIMER_V)<<(RTC_CNTL_DG_PERI_POWERUP_TIMER_S)) #define RTC_CNTL_DG_PERI_POWERUP_TIMER_V 0x7F #define RTC_CNTL_DG_PERI_POWERUP_TIMER_S 25 /* RTC_CNTL_DG_PERI_WAIT_TIMER : R/W ;bitpos:[24:16] ;default: 9'h8 ; */ /*description: */ #define RTC_CNTL_DG_PERI_WAIT_TIMER 0x000001FF #define RTC_CNTL_DG_PERI_WAIT_TIMER_M ((RTC_CNTL_DG_PERI_WAIT_TIMER_V)<<(RTC_CNTL_DG_PERI_WAIT_TIMER_S)) #define RTC_CNTL_DG_PERI_WAIT_TIMER_V 0x1FF #define RTC_CNTL_DG_PERI_WAIT_TIMER_S 16 #define RTC_CNTL_ANA_CONF_REG (DR_REG_RTCCNTL_BASE + 0x0034) /* RTC_CNTL_PLL_I2C_PU : R/W ;bitpos:[31] ;default: 1'd0 ; */ /*description: */ #define RTC_CNTL_PLL_I2C_PU (BIT(31)) #define RTC_CNTL_PLL_I2C_PU_M (BIT(31)) #define RTC_CNTL_PLL_I2C_PU_V 0x1 #define RTC_CNTL_PLL_I2C_PU_S 31 /* RTC_CNTL_CKGEN_I2C_PU : R/W ;bitpos:[30] ;default: 1'd0 ; */ /*description: 1: CKGEN_I2C power up*/ #define RTC_CNTL_CKGEN_I2C_PU (BIT(30)) #define RTC_CNTL_CKGEN_I2C_PU_M (BIT(30)) #define RTC_CNTL_CKGEN_I2C_PU_V 0x1 #define RTC_CNTL_CKGEN_I2C_PU_S 30 /* RTC_CNTL_RFRX_PBUS_PU : R/W ;bitpos:[28] ;default: 1'd0 ; */ /*description: 1: RFRX_PBUS power up*/ #define RTC_CNTL_RFRX_PBUS_PU (BIT(28)) #define RTC_CNTL_RFRX_PBUS_PU_M (BIT(28)) #define RTC_CNTL_RFRX_PBUS_PU_V 0x1 #define RTC_CNTL_RFRX_PBUS_PU_S 28 /* RTC_CNTL_TXRF_I2C_PU : R/W ;bitpos:[27] ;default: 1'd0 ; */ /*description: 1: TXRF_I2C power up*/ #define RTC_CNTL_TXRF_I2C_PU (BIT(27)) #define RTC_CNTL_TXRF_I2C_PU_M (BIT(27)) #define RTC_CNTL_TXRF_I2C_PU_V 0x1 #define RTC_CNTL_TXRF_I2C_PU_S 27 /* RTC_CNTL_PVTMON_PU : R/W ;bitpos:[26] ;default: 1'b0 ; */ /*description: 1: PVTMON power up*/ #define RTC_CNTL_PVTMON_PU (BIT(26)) #define RTC_CNTL_PVTMON_PU_M (BIT(26)) #define RTC_CNTL_PVTMON_PU_V 0x1 #define RTC_CNTL_PVTMON_PU_S 26 /* RTC_CNTL_BBPLL_CAL_SLP_START : R/W ;bitpos:[25] ;default: 1'b0 ; */ /*description: start BBPLL calibration during sleep*/ #define RTC_CNTL_BBPLL_CAL_SLP_START (BIT(25)) #define RTC_CNTL_BBPLL_CAL_SLP_START_M (BIT(25)) #define RTC_CNTL_BBPLL_CAL_SLP_START_V 0x1 #define RTC_CNTL_BBPLL_CAL_SLP_START_S 25 /* RTC_CNTL_PLLA_FORCE_PU : R/W ;bitpos:[24] ;default: 1'b0 ; */ /*description: PLLA force power up*/ #define RTC_CNTL_PLLA_FORCE_PU (BIT(24)) #define RTC_CNTL_PLLA_FORCE_PU_M (BIT(24)) #define RTC_CNTL_PLLA_FORCE_PU_V 0x1 #define RTC_CNTL_PLLA_FORCE_PU_S 24 /* RTC_CNTL_PLLA_FORCE_PD : R/W ;bitpos:[23] ;default: 1'b1 ; */ /*description: PLLA force power down*/ #define RTC_CNTL_PLLA_FORCE_PD (BIT(23)) #define RTC_CNTL_PLLA_FORCE_PD_M (BIT(23)) #define RTC_CNTL_PLLA_FORCE_PD_V 0x1 #define RTC_CNTL_PLLA_FORCE_PD_S 23 /* RTC_CNTL_SAR_I2C_PU : R/W ;bitpos:[22] ;default: 1'b1 ; */ /*description: PLLA force power up*/ #define RTC_CNTL_SAR_I2C_PU (BIT(22)) #define RTC_CNTL_SAR_I2C_PU_M (BIT(22)) #define RTC_CNTL_SAR_I2C_PU_V 0x1 #define RTC_CNTL_SAR_I2C_PU_S 22 /* RTC_CNTL_GLITCH_RST_EN : R/W ;bitpos:[20] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GLITCH_RST_EN (BIT(20)) #define RTC_CNTL_GLITCH_RST_EN_M (BIT(20)) #define RTC_CNTL_GLITCH_RST_EN_V 0x1 #define RTC_CNTL_GLITCH_RST_EN_S 20 /* RTC_CNTL_I2C_RESET_POR_FORCE_PU : R/W ;bitpos:[19] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_I2C_RESET_POR_FORCE_PU (BIT(19)) #define RTC_CNTL_I2C_RESET_POR_FORCE_PU_M (BIT(19)) #define RTC_CNTL_I2C_RESET_POR_FORCE_PU_V 0x1 #define RTC_CNTL_I2C_RESET_POR_FORCE_PU_S 19 /* RTC_CNTL_I2C_RESET_POR_FORCE_PD : R/W ;bitpos:[18] ;default: 1'b1 ; */ /*description: */ #define RTC_CNTL_I2C_RESET_POR_FORCE_PD (BIT(18)) #define RTC_CNTL_I2C_RESET_POR_FORCE_PD_M (BIT(18)) #define RTC_CNTL_I2C_RESET_POR_FORCE_PD_V 0x1 #define RTC_CNTL_I2C_RESET_POR_FORCE_PD_S 18 #define RTC_CNTL_RESET_STATE_REG (DR_REG_RTCCNTL_BASE + 0x0038) /* RTC_CNTL_DRESET_MASK_PROCPU : R/W ;bitpos:[25] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_DRESET_MASK_PROCPU (BIT(25)) #define RTC_CNTL_DRESET_MASK_PROCPU_M (BIT(25)) #define RTC_CNTL_DRESET_MASK_PROCPU_V 0x1 #define RTC_CNTL_DRESET_MASK_PROCPU_S 25 /* RTC_CNTL_DRESET_MASK_APPCPU : R/W ;bitpos:[24] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_DRESET_MASK_APPCPU (BIT(24)) #define RTC_CNTL_DRESET_MASK_APPCPU_M (BIT(24)) #define RTC_CNTL_DRESET_MASK_APPCPU_V 0x1 #define RTC_CNTL_DRESET_MASK_APPCPU_S 24 /* RTC_CNTL_JTAG_RESET_FLAG_CLR_APPCPU : WO ;bitpos:[23] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_JTAG_RESET_FLAG_CLR_APPCPU (BIT(23)) #define RTC_CNTL_JTAG_RESET_FLAG_CLR_APPCPU_M (BIT(23)) #define RTC_CNTL_JTAG_RESET_FLAG_CLR_APPCPU_V 0x1 #define RTC_CNTL_JTAG_RESET_FLAG_CLR_APPCPU_S 23 /* RTC_CNTL_JTAG_RESET_FLAG_CLR_PROCPU : WO ;bitpos:[22] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_JTAG_RESET_FLAG_CLR_PROCPU (BIT(22)) #define RTC_CNTL_JTAG_RESET_FLAG_CLR_PROCPU_M (BIT(22)) #define RTC_CNTL_JTAG_RESET_FLAG_CLR_PROCPU_V 0x1 #define RTC_CNTL_JTAG_RESET_FLAG_CLR_PROCPU_S 22 /* RTC_CNTL_JTAG_RESET_FLAG_APPCPU : RO ;bitpos:[21] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_JTAG_RESET_FLAG_APPCPU (BIT(21)) #define RTC_CNTL_JTAG_RESET_FLAG_APPCPU_M (BIT(21)) #define RTC_CNTL_JTAG_RESET_FLAG_APPCPU_V 0x1 #define RTC_CNTL_JTAG_RESET_FLAG_APPCPU_S 21 /* RTC_CNTL_JTAG_RESET_FLAG_PROCPU : RO ;bitpos:[20] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_JTAG_RESET_FLAG_PROCPU (BIT(20)) #define RTC_CNTL_JTAG_RESET_FLAG_PROCPU_M (BIT(20)) #define RTC_CNTL_JTAG_RESET_FLAG_PROCPU_V 0x1 #define RTC_CNTL_JTAG_RESET_FLAG_PROCPU_S 20 /* RTC_CNTL_OCD_HALT_ON_RESET_PROCPU : R/W ;bitpos:[19] ;default: 1'b0 ; */ /*description: PROCPU OcdHaltOnReset*/ #define RTC_CNTL_OCD_HALT_ON_RESET_PROCPU (BIT(19)) #define RTC_CNTL_OCD_HALT_ON_RESET_PROCPU_M (BIT(19)) #define RTC_CNTL_OCD_HALT_ON_RESET_PROCPU_V 0x1 #define RTC_CNTL_OCD_HALT_ON_RESET_PROCPU_S 19 /* RTC_CNTL_OCD_HALT_ON_RESET_APPCPU : R/W ;bitpos:[18] ;default: 1'b0 ; */ /*description: APPCPU OcdHaltOnReset*/ #define RTC_CNTL_OCD_HALT_ON_RESET_APPCPU (BIT(18)) #define RTC_CNTL_OCD_HALT_ON_RESET_APPCPU_M (BIT(18)) #define RTC_CNTL_OCD_HALT_ON_RESET_APPCPU_V 0x1 #define RTC_CNTL_OCD_HALT_ON_RESET_APPCPU_S 18 /* RTC_CNTL_ALL_RESET_FLAG_CLR_APPCPU : WO ;bitpos:[17] ;default: 1'b0 ; */ /*description: clear APP CPU reset flag*/ #define RTC_CNTL_ALL_RESET_FLAG_CLR_APPCPU (BIT(17)) #define RTC_CNTL_ALL_RESET_FLAG_CLR_APPCPU_M (BIT(17)) #define RTC_CNTL_ALL_RESET_FLAG_CLR_APPCPU_V 0x1 #define RTC_CNTL_ALL_RESET_FLAG_CLR_APPCPU_S 17 /* RTC_CNTL_ALL_RESET_FLAG_CLR_PROCPU : WO ;bitpos:[16] ;default: 1'b0 ; */ /*description: clear PRO CPU reset_flag*/ #define RTC_CNTL_ALL_RESET_FLAG_CLR_PROCPU (BIT(16)) #define RTC_CNTL_ALL_RESET_FLAG_CLR_PROCPU_M (BIT(16)) #define RTC_CNTL_ALL_RESET_FLAG_CLR_PROCPU_V 0x1 #define RTC_CNTL_ALL_RESET_FLAG_CLR_PROCPU_S 16 /* RTC_CNTL_ALL_RESET_FLAG_APPCPU : RO ;bitpos:[15] ;default: 1'b0 ; */ /*description: APP CPU reset flag*/ #define RTC_CNTL_ALL_RESET_FLAG_APPCPU (BIT(15)) #define RTC_CNTL_ALL_RESET_FLAG_APPCPU_M (BIT(15)) #define RTC_CNTL_ALL_RESET_FLAG_APPCPU_V 0x1 #define RTC_CNTL_ALL_RESET_FLAG_APPCPU_S 15 /* RTC_CNTL_ALL_RESET_FLAG_PROCPU : RO ;bitpos:[14] ;default: 1'b0 ; */ /*description: PRO CPU reset_flag*/ #define RTC_CNTL_ALL_RESET_FLAG_PROCPU (BIT(14)) #define RTC_CNTL_ALL_RESET_FLAG_PROCPU_M (BIT(14)) #define RTC_CNTL_ALL_RESET_FLAG_PROCPU_V 0x1 #define RTC_CNTL_ALL_RESET_FLAG_PROCPU_S 14 /* RTC_CNTL_STAT_VECTOR_SEL_PROCPU : R/W ;bitpos:[13] ;default: 1'b1 ; */ /*description: PRO CPU state vector sel*/ #define RTC_CNTL_STAT_VECTOR_SEL_PROCPU (BIT(13)) #define RTC_CNTL_STAT_VECTOR_SEL_PROCPU_M (BIT(13)) #define RTC_CNTL_STAT_VECTOR_SEL_PROCPU_V 0x1 #define RTC_CNTL_STAT_VECTOR_SEL_PROCPU_S 13 /* RTC_CNTL_STAT_VECTOR_SEL_APPCPU : R/W ;bitpos:[12] ;default: 1'b1 ; */ /*description: APP CPU state vector sel*/ #define RTC_CNTL_STAT_VECTOR_SEL_APPCPU (BIT(12)) #define RTC_CNTL_STAT_VECTOR_SEL_APPCPU_M (BIT(12)) #define RTC_CNTL_STAT_VECTOR_SEL_APPCPU_V 0x1 #define RTC_CNTL_STAT_VECTOR_SEL_APPCPU_S 12 /* RTC_CNTL_RESET_CAUSE_APPCPU : RO ;bitpos:[11:6] ;default: 0 ; */ /*description: reset cause of APP CPU*/ #define RTC_CNTL_RESET_CAUSE_APPCPU 0x0000003F #define RTC_CNTL_RESET_CAUSE_APPCPU_M ((RTC_CNTL_RESET_CAUSE_APPCPU_V)<<(RTC_CNTL_RESET_CAUSE_APPCPU_S)) #define RTC_CNTL_RESET_CAUSE_APPCPU_V 0x3F #define RTC_CNTL_RESET_CAUSE_APPCPU_S 6 /* RTC_CNTL_RESET_CAUSE_PROCPU : RO ;bitpos:[5:0] ;default: 0 ; */ /*description: reset cause of PRO CPU*/ #define RTC_CNTL_RESET_CAUSE_PROCPU 0x0000003F #define RTC_CNTL_RESET_CAUSE_PROCPU_M ((RTC_CNTL_RESET_CAUSE_PROCPU_V)<<(RTC_CNTL_RESET_CAUSE_PROCPU_S)) #define RTC_CNTL_RESET_CAUSE_PROCPU_V 0x3F #define RTC_CNTL_RESET_CAUSE_PROCPU_S 0 #define RTC_CNTL_WAKEUP_STATE_REG (DR_REG_RTCCNTL_BASE + 0x003C) /* RTC_CNTL_WAKEUP_ENA : R/W ;bitpos:[31:15] ;default: 17'b1100 ; */ /*description: wakeup enable bitmap*/ #define RTC_CNTL_WAKEUP_ENA 0x0001FFFF #define RTC_CNTL_WAKEUP_ENA_M ((RTC_CNTL_WAKEUP_ENA_V)<<(RTC_CNTL_WAKEUP_ENA_S)) #define RTC_CNTL_WAKEUP_ENA_V 0x1FFFF #define RTC_CNTL_WAKEUP_ENA_S 15 #define RTC_CNTL_INT_ENA_REG (DR_REG_RTCCNTL_BASE + 0x0040) /* RTC_CNTL_BBPLL_CAL_INT_ENA : R/W ;bitpos:[20] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BBPLL_CAL_INT_ENA (BIT(20)) #define RTC_CNTL_BBPLL_CAL_INT_ENA_M (BIT(20)) #define RTC_CNTL_BBPLL_CAL_INT_ENA_V 0x1 #define RTC_CNTL_BBPLL_CAL_INT_ENA_S 20 /* RTC_CNTL_GLITCH_DET_INT_ENA : R/W ;bitpos:[19] ;default: 1'b0 ; */ /*description: enbale gitch det interrupt*/ #define RTC_CNTL_GLITCH_DET_INT_ENA (BIT(19)) #define RTC_CNTL_GLITCH_DET_INT_ENA_M (BIT(19)) #define RTC_CNTL_GLITCH_DET_INT_ENA_V 0x1 #define RTC_CNTL_GLITCH_DET_INT_ENA_S 19 /* RTC_CNTL_XTAL32K_DEAD_INT_ENA : R/W ;bitpos:[16] ;default: 1'b0 ; */ /*description: enable xtal32k_dead interrupt*/ #define RTC_CNTL_XTAL32K_DEAD_INT_ENA (BIT(16)) #define RTC_CNTL_XTAL32K_DEAD_INT_ENA_M (BIT(16)) #define RTC_CNTL_XTAL32K_DEAD_INT_ENA_V 0x1 #define RTC_CNTL_XTAL32K_DEAD_INT_ENA_S 16 /* RTC_CNTL_SWD_INT_ENA : R/W ;bitpos:[15] ;default: 1'b0 ; */ /*description: enable super watch dog interrupt*/ #define RTC_CNTL_SWD_INT_ENA (BIT(15)) #define RTC_CNTL_SWD_INT_ENA_M (BIT(15)) #define RTC_CNTL_SWD_INT_ENA_V 0x1 #define RTC_CNTL_SWD_INT_ENA_S 15 /* RTC_CNTL_MAIN_TIMER_INT_ENA : R/W ;bitpos:[10] ;default: 1'b0 ; */ /*description: enable RTC main timer interrupt*/ #define RTC_CNTL_MAIN_TIMER_INT_ENA (BIT(10)) #define RTC_CNTL_MAIN_TIMER_INT_ENA_M (BIT(10)) #define RTC_CNTL_MAIN_TIMER_INT_ENA_V 0x1 #define RTC_CNTL_MAIN_TIMER_INT_ENA_S 10 /* RTC_CNTL_BROWN_OUT_INT_ENA : R/W ;bitpos:[9] ;default: 1'b0 ; */ /*description: enable brown out interrupt*/ #define RTC_CNTL_BROWN_OUT_INT_ENA (BIT(9)) #define RTC_CNTL_BROWN_OUT_INT_ENA_M (BIT(9)) #define RTC_CNTL_BROWN_OUT_INT_ENA_V 0x1 #define RTC_CNTL_BROWN_OUT_INT_ENA_S 9 /* RTC_CNTL_WDT_INT_ENA : R/W ;bitpos:[3] ;default: 1'b0 ; */ /*description: enable RTC WDT interrupt*/ #define RTC_CNTL_WDT_INT_ENA (BIT(3)) #define RTC_CNTL_WDT_INT_ENA_M (BIT(3)) #define RTC_CNTL_WDT_INT_ENA_V 0x1 #define RTC_CNTL_WDT_INT_ENA_S 3 /* RTC_CNTL_SLP_REJECT_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */ /*description: enable sleep reject interrupt*/ #define RTC_CNTL_SLP_REJECT_INT_ENA (BIT(1)) #define RTC_CNTL_SLP_REJECT_INT_ENA_M (BIT(1)) #define RTC_CNTL_SLP_REJECT_INT_ENA_V 0x1 #define RTC_CNTL_SLP_REJECT_INT_ENA_S 1 /* RTC_CNTL_SLP_WAKEUP_INT_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */ /*description: enable sleep wakeup interrupt*/ #define RTC_CNTL_SLP_WAKEUP_INT_ENA (BIT(0)) #define RTC_CNTL_SLP_WAKEUP_INT_ENA_M (BIT(0)) #define RTC_CNTL_SLP_WAKEUP_INT_ENA_V 0x1 #define RTC_CNTL_SLP_WAKEUP_INT_ENA_S 0 #define RTC_CNTL_INT_RAW_REG (DR_REG_RTCCNTL_BASE + 0x0044) /* RTC_CNTL_BBPLL_CAL_INT_RAW : RO ;bitpos:[20] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BBPLL_CAL_INT_RAW (BIT(20)) #define RTC_CNTL_BBPLL_CAL_INT_RAW_M (BIT(20)) #define RTC_CNTL_BBPLL_CAL_INT_RAW_V 0x1 #define RTC_CNTL_BBPLL_CAL_INT_RAW_S 20 /* RTC_CNTL_GLITCH_DET_INT_RAW : RO ;bitpos:[19] ;default: 1'b0 ; */ /*description: glitch_det_interrupt_raw*/ #define RTC_CNTL_GLITCH_DET_INT_RAW (BIT(19)) #define RTC_CNTL_GLITCH_DET_INT_RAW_M (BIT(19)) #define RTC_CNTL_GLITCH_DET_INT_RAW_V 0x1 #define RTC_CNTL_GLITCH_DET_INT_RAW_S 19 /* RTC_CNTL_XTAL32K_DEAD_INT_RAW : RO ;bitpos:[16] ;default: 1'b0 ; */ /*description: xtal32k dead detection interrupt raw*/ #define RTC_CNTL_XTAL32K_DEAD_INT_RAW (BIT(16)) #define RTC_CNTL_XTAL32K_DEAD_INT_RAW_M (BIT(16)) #define RTC_CNTL_XTAL32K_DEAD_INT_RAW_V 0x1 #define RTC_CNTL_XTAL32K_DEAD_INT_RAW_S 16 /* RTC_CNTL_SWD_INT_RAW : RO ;bitpos:[15] ;default: 1'b0 ; */ /*description: super watch dog interrupt raw*/ #define RTC_CNTL_SWD_INT_RAW (BIT(15)) #define RTC_CNTL_SWD_INT_RAW_M (BIT(15)) #define RTC_CNTL_SWD_INT_RAW_V 0x1 #define RTC_CNTL_SWD_INT_RAW_S 15 /* RTC_CNTL_MAIN_TIMER_INT_RAW : RO ;bitpos:[10] ;default: 1'b0 ; */ /*description: RTC main timer interrupt raw*/ #define RTC_CNTL_MAIN_TIMER_INT_RAW (BIT(10)) #define RTC_CNTL_MAIN_TIMER_INT_RAW_M (BIT(10)) #define RTC_CNTL_MAIN_TIMER_INT_RAW_V 0x1 #define RTC_CNTL_MAIN_TIMER_INT_RAW_S 10 /* RTC_CNTL_BROWN_OUT_INT_RAW : RO ;bitpos:[9] ;default: 1'b0 ; */ /*description: brown out interrupt raw*/ #define RTC_CNTL_BROWN_OUT_INT_RAW (BIT(9)) #define RTC_CNTL_BROWN_OUT_INT_RAW_M (BIT(9)) #define RTC_CNTL_BROWN_OUT_INT_RAW_V 0x1 #define RTC_CNTL_BROWN_OUT_INT_RAW_S 9 /* RTC_CNTL_WDT_INT_RAW : RO ;bitpos:[3] ;default: 1'b0 ; */ /*description: RTC WDT interrupt raw*/ #define RTC_CNTL_WDT_INT_RAW (BIT(3)) #define RTC_CNTL_WDT_INT_RAW_M (BIT(3)) #define RTC_CNTL_WDT_INT_RAW_V 0x1 #define RTC_CNTL_WDT_INT_RAW_S 3 /* RTC_CNTL_SLP_REJECT_INT_RAW : RO ;bitpos:[1] ;default: 1'b0 ; */ /*description: sleep reject interrupt raw*/ #define RTC_CNTL_SLP_REJECT_INT_RAW (BIT(1)) #define RTC_CNTL_SLP_REJECT_INT_RAW_M (BIT(1)) #define RTC_CNTL_SLP_REJECT_INT_RAW_V 0x1 #define RTC_CNTL_SLP_REJECT_INT_RAW_S 1 /* RTC_CNTL_SLP_WAKEUP_INT_RAW : RO ;bitpos:[0] ;default: 1'b0 ; */ /*description: sleep wakeup interrupt raw*/ #define RTC_CNTL_SLP_WAKEUP_INT_RAW (BIT(0)) #define RTC_CNTL_SLP_WAKEUP_INT_RAW_M (BIT(0)) #define RTC_CNTL_SLP_WAKEUP_INT_RAW_V 0x1 #define RTC_CNTL_SLP_WAKEUP_INT_RAW_S 0 #define RTC_CNTL_INT_ST_REG (DR_REG_RTCCNTL_BASE + 0x0048) /* RTC_CNTL_BBPLL_CAL_INT_ST : RO ;bitpos:[20] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BBPLL_CAL_INT_ST (BIT(20)) #define RTC_CNTL_BBPLL_CAL_INT_ST_M (BIT(20)) #define RTC_CNTL_BBPLL_CAL_INT_ST_V 0x1 #define RTC_CNTL_BBPLL_CAL_INT_ST_S 20 /* RTC_CNTL_GLITCH_DET_INT_ST : RO ;bitpos:[19] ;default: 1'b0 ; */ /*description: glitch_det_interrupt state*/ #define RTC_CNTL_GLITCH_DET_INT_ST (BIT(19)) #define RTC_CNTL_GLITCH_DET_INT_ST_M (BIT(19)) #define RTC_CNTL_GLITCH_DET_INT_ST_V 0x1 #define RTC_CNTL_GLITCH_DET_INT_ST_S 19 /* RTC_CNTL_XTAL32K_DEAD_INT_ST : RO ;bitpos:[16] ;default: 1'b0 ; */ /*description: xtal32k dead detection interrupt state*/ #define RTC_CNTL_XTAL32K_DEAD_INT_ST (BIT(16)) #define RTC_CNTL_XTAL32K_DEAD_INT_ST_M (BIT(16)) #define RTC_CNTL_XTAL32K_DEAD_INT_ST_V 0x1 #define RTC_CNTL_XTAL32K_DEAD_INT_ST_S 16 /* RTC_CNTL_SWD_INT_ST : RO ;bitpos:[15] ;default: 1'b0 ; */ /*description: super watch dog interrupt state*/ #define RTC_CNTL_SWD_INT_ST (BIT(15)) #define RTC_CNTL_SWD_INT_ST_M (BIT(15)) #define RTC_CNTL_SWD_INT_ST_V 0x1 #define RTC_CNTL_SWD_INT_ST_S 15 /* RTC_CNTL_MAIN_TIMER_INT_ST : RO ;bitpos:[10] ;default: 1'b0 ; */ /*description: RTC main timer interrupt state*/ #define RTC_CNTL_MAIN_TIMER_INT_ST (BIT(10)) #define RTC_CNTL_MAIN_TIMER_INT_ST_M (BIT(10)) #define RTC_CNTL_MAIN_TIMER_INT_ST_V 0x1 #define RTC_CNTL_MAIN_TIMER_INT_ST_S 10 /* RTC_CNTL_BROWN_OUT_INT_ST : RO ;bitpos:[9] ;default: 1'b0 ; */ /*description: brown out interrupt state*/ #define RTC_CNTL_BROWN_OUT_INT_ST (BIT(9)) #define RTC_CNTL_BROWN_OUT_INT_ST_M (BIT(9)) #define RTC_CNTL_BROWN_OUT_INT_ST_V 0x1 #define RTC_CNTL_BROWN_OUT_INT_ST_S 9 /* RTC_CNTL_WDT_INT_ST : RO ;bitpos:[3] ;default: 1'b0 ; */ /*description: RTC WDT interrupt state*/ #define RTC_CNTL_WDT_INT_ST (BIT(3)) #define RTC_CNTL_WDT_INT_ST_M (BIT(3)) #define RTC_CNTL_WDT_INT_ST_V 0x1 #define RTC_CNTL_WDT_INT_ST_S 3 /* RTC_CNTL_SLP_REJECT_INT_ST : RO ;bitpos:[1] ;default: 1'b0 ; */ /*description: sleep reject interrupt state*/ #define RTC_CNTL_SLP_REJECT_INT_ST (BIT(1)) #define RTC_CNTL_SLP_REJECT_INT_ST_M (BIT(1)) #define RTC_CNTL_SLP_REJECT_INT_ST_V 0x1 #define RTC_CNTL_SLP_REJECT_INT_ST_S 1 /* RTC_CNTL_SLP_WAKEUP_INT_ST : RO ;bitpos:[0] ;default: 1'b0 ; */ /*description: sleep wakeup interrupt state*/ #define RTC_CNTL_SLP_WAKEUP_INT_ST (BIT(0)) #define RTC_CNTL_SLP_WAKEUP_INT_ST_M (BIT(0)) #define RTC_CNTL_SLP_WAKEUP_INT_ST_V 0x1 #define RTC_CNTL_SLP_WAKEUP_INT_ST_S 0 #define RTC_CNTL_INT_CLR_REG (DR_REG_RTCCNTL_BASE + 0x004C) /* RTC_CNTL_BBPLL_CAL_INT_CLR : WO ;bitpos:[20] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BBPLL_CAL_INT_CLR (BIT(20)) #define RTC_CNTL_BBPLL_CAL_INT_CLR_M (BIT(20)) #define RTC_CNTL_BBPLL_CAL_INT_CLR_V 0x1 #define RTC_CNTL_BBPLL_CAL_INT_CLR_S 20 /* RTC_CNTL_GLITCH_DET_INT_CLR : WO ;bitpos:[19] ;default: 1'b0 ; */ /*description: Clear glitch det interrupt state*/ #define RTC_CNTL_GLITCH_DET_INT_CLR (BIT(19)) #define RTC_CNTL_GLITCH_DET_INT_CLR_M (BIT(19)) #define RTC_CNTL_GLITCH_DET_INT_CLR_V 0x1 #define RTC_CNTL_GLITCH_DET_INT_CLR_S 19 /* RTC_CNTL_XTAL32K_DEAD_INT_CLR : WO ;bitpos:[16] ;default: 1'b0 ; */ /*description: Clear RTC WDT interrupt state*/ #define RTC_CNTL_XTAL32K_DEAD_INT_CLR (BIT(16)) #define RTC_CNTL_XTAL32K_DEAD_INT_CLR_M (BIT(16)) #define RTC_CNTL_XTAL32K_DEAD_INT_CLR_V 0x1 #define RTC_CNTL_XTAL32K_DEAD_INT_CLR_S 16 /* RTC_CNTL_SWD_INT_CLR : WO ;bitpos:[15] ;default: 1'b0 ; */ /*description: Clear super watch dog interrupt state*/ #define RTC_CNTL_SWD_INT_CLR (BIT(15)) #define RTC_CNTL_SWD_INT_CLR_M (BIT(15)) #define RTC_CNTL_SWD_INT_CLR_V 0x1 #define RTC_CNTL_SWD_INT_CLR_S 15 /* RTC_CNTL_MAIN_TIMER_INT_CLR : WO ;bitpos:[10] ;default: 1'b0 ; */ /*description: Clear RTC main timer interrupt state*/ #define RTC_CNTL_MAIN_TIMER_INT_CLR (BIT(10)) #define RTC_CNTL_MAIN_TIMER_INT_CLR_M (BIT(10)) #define RTC_CNTL_MAIN_TIMER_INT_CLR_V 0x1 #define RTC_CNTL_MAIN_TIMER_INT_CLR_S 10 /* RTC_CNTL_BROWN_OUT_INT_CLR : WO ;bitpos:[9] ;default: 1'b0 ; */ /*description: Clear brown out interrupt state*/ #define RTC_CNTL_BROWN_OUT_INT_CLR (BIT(9)) #define RTC_CNTL_BROWN_OUT_INT_CLR_M (BIT(9)) #define RTC_CNTL_BROWN_OUT_INT_CLR_V 0x1 #define RTC_CNTL_BROWN_OUT_INT_CLR_S 9 /* RTC_CNTL_WDT_INT_CLR : WO ;bitpos:[3] ;default: 1'b0 ; */ /*description: Clear RTC WDT interrupt state*/ #define RTC_CNTL_WDT_INT_CLR (BIT(3)) #define RTC_CNTL_WDT_INT_CLR_M (BIT(3)) #define RTC_CNTL_WDT_INT_CLR_V 0x1 #define RTC_CNTL_WDT_INT_CLR_S 3 /* RTC_CNTL_SLP_REJECT_INT_CLR : WO ;bitpos:[1] ;default: 1'b0 ; */ /*description: Clear sleep reject interrupt state*/ #define RTC_CNTL_SLP_REJECT_INT_CLR (BIT(1)) #define RTC_CNTL_SLP_REJECT_INT_CLR_M (BIT(1)) #define RTC_CNTL_SLP_REJECT_INT_CLR_V 0x1 #define RTC_CNTL_SLP_REJECT_INT_CLR_S 1 /* RTC_CNTL_SLP_WAKEUP_INT_CLR : WO ;bitpos:[0] ;default: 1'b0 ; */ /*description: Clear sleep wakeup interrupt state*/ #define RTC_CNTL_SLP_WAKEUP_INT_CLR (BIT(0)) #define RTC_CNTL_SLP_WAKEUP_INT_CLR_M (BIT(0)) #define RTC_CNTL_SLP_WAKEUP_INT_CLR_V 0x1 #define RTC_CNTL_SLP_WAKEUP_INT_CLR_S 0 #define RTC_CNTL_STORE0_REG (DR_REG_RTCCNTL_BASE + 0x0050) /* RTC_CNTL_SCRATCH0 : R/W ;bitpos:[31:0] ;default: 0 ; */ /*description: */ #define RTC_CNTL_SCRATCH0 0xFFFFFFFF #define RTC_CNTL_SCRATCH0_M ((RTC_CNTL_SCRATCH0_V)<<(RTC_CNTL_SCRATCH0_S)) #define RTC_CNTL_SCRATCH0_V 0xFFFFFFFF #define RTC_CNTL_SCRATCH0_S 0 #define RTC_CNTL_STORE1_REG (DR_REG_RTCCNTL_BASE + 0x0054) /* RTC_CNTL_SCRATCH1 : R/W ;bitpos:[31:0] ;default: 0 ; */ /*description: */ #define RTC_CNTL_SCRATCH1 0xFFFFFFFF #define RTC_CNTL_SCRATCH1_M ((RTC_CNTL_SCRATCH1_V)<<(RTC_CNTL_SCRATCH1_S)) #define RTC_CNTL_SCRATCH1_V 0xFFFFFFFF #define RTC_CNTL_SCRATCH1_S 0 #define RTC_CNTL_STORE2_REG (DR_REG_RTCCNTL_BASE + 0x0058) /* RTC_CNTL_SCRATCH2 : R/W ;bitpos:[31:0] ;default: 0 ; */ /*description: */ #define RTC_CNTL_SCRATCH2 0xFFFFFFFF #define RTC_CNTL_SCRATCH2_M ((RTC_CNTL_SCRATCH2_V)<<(RTC_CNTL_SCRATCH2_S)) #define RTC_CNTL_SCRATCH2_V 0xFFFFFFFF #define RTC_CNTL_SCRATCH2_S 0 #define RTC_CNTL_STORE3_REG (DR_REG_RTCCNTL_BASE + 0x005C) /* RTC_CNTL_SCRATCH3 : R/W ;bitpos:[31:0] ;default: 0 ; */ /*description: */ #define RTC_CNTL_SCRATCH3 0xFFFFFFFF #define RTC_CNTL_SCRATCH3_M ((RTC_CNTL_SCRATCH3_V)<<(RTC_CNTL_SCRATCH3_S)) #define RTC_CNTL_SCRATCH3_V 0xFFFFFFFF #define RTC_CNTL_SCRATCH3_S 0 #define RTC_CNTL_EXT_XTL_CONF_REG (DR_REG_RTCCNTL_BASE + 0x0060) /* RTC_CNTL_XTL_EXT_CTR_EN : R/W ;bitpos:[31] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_XTL_EXT_CTR_EN (BIT(31)) #define RTC_CNTL_XTL_EXT_CTR_EN_M (BIT(31)) #define RTC_CNTL_XTL_EXT_CTR_EN_V 0x1 #define RTC_CNTL_XTL_EXT_CTR_EN_S 31 /* RTC_CNTL_XTL_EXT_CTR_LV : R/W ;bitpos:[30] ;default: 1'b0 ; */ /*description: 0: power down XTAL at high level*/ #define RTC_CNTL_XTL_EXT_CTR_LV (BIT(30)) #define RTC_CNTL_XTL_EXT_CTR_LV_M (BIT(30)) #define RTC_CNTL_XTL_EXT_CTR_LV_V 0x1 #define RTC_CNTL_XTL_EXT_CTR_LV_S 30 /* RTC_CNTL_XTAL32K_GPIO_SEL : R/W ;bitpos:[23] ;default: 1'b0 ; */ /*description: XTAL_32K sel. 0: external XTAL_32K*/ #define RTC_CNTL_XTAL32K_GPIO_SEL (BIT(23)) #define RTC_CNTL_XTAL32K_GPIO_SEL_M (BIT(23)) #define RTC_CNTL_XTAL32K_GPIO_SEL_V 0x1 #define RTC_CNTL_XTAL32K_GPIO_SEL_S 23 /* RTC_CNTL_WDT_STATE : RO ;bitpos:[22:20] ;default: 3'h0 ; */ /*description: state of 32k_wdt*/ #define RTC_CNTL_WDT_STATE 0x00000007 #define RTC_CNTL_WDT_STATE_M ((RTC_CNTL_WDT_STATE_V)<<(RTC_CNTL_WDT_STATE_S)) #define RTC_CNTL_WDT_STATE_V 0x7 #define RTC_CNTL_WDT_STATE_S 20 /* RTC_CNTL_DAC_XTAL_32K : R/W ;bitpos:[19:17] ;default: 3'd3 ; */ /*description: DAC_XTAL_32K*/ #define RTC_CNTL_DAC_XTAL_32K 0x00000007 #define RTC_CNTL_DAC_XTAL_32K_M ((RTC_CNTL_DAC_XTAL_32K_V)<<(RTC_CNTL_DAC_XTAL_32K_S)) #define RTC_CNTL_DAC_XTAL_32K_V 0x7 #define RTC_CNTL_DAC_XTAL_32K_S 17 /* RTC_CNTL_XPD_XTAL_32K : R/W ;bitpos:[16] ;default: 1'd0 ; */ /*description: XPD_XTAL_32K*/ #define RTC_CNTL_XPD_XTAL_32K (BIT(16)) #define RTC_CNTL_XPD_XTAL_32K_M (BIT(16)) #define RTC_CNTL_XPD_XTAL_32K_V 0x1 #define RTC_CNTL_XPD_XTAL_32K_S 16 /* RTC_CNTL_DRES_XTAL_32K : R/W ;bitpos:[15:13] ;default: 3'd3 ; */ /*description: DRES_XTAL_32K*/ #define RTC_CNTL_DRES_XTAL_32K 0x00000007 #define RTC_CNTL_DRES_XTAL_32K_M ((RTC_CNTL_DRES_XTAL_32K_V)<<(RTC_CNTL_DRES_XTAL_32K_S)) #define RTC_CNTL_DRES_XTAL_32K_V 0x7 #define RTC_CNTL_DRES_XTAL_32K_S 13 /* RTC_CNTL_DGM_XTAL_32K : R/W ;bitpos:[12:10] ;default: 3'd3 ; */ /*description: xtal_32k gm control*/ #define RTC_CNTL_DGM_XTAL_32K 0x00000007 #define RTC_CNTL_DGM_XTAL_32K_M ((RTC_CNTL_DGM_XTAL_32K_V)<<(RTC_CNTL_DGM_XTAL_32K_S)) #define RTC_CNTL_DGM_XTAL_32K_V 0x7 #define RTC_CNTL_DGM_XTAL_32K_S 10 /* RTC_CNTL_DBUF_XTAL_32K : R/W ;bitpos:[9] ;default: 1'b0 ; */ /*description: 0: single-end buffer 1: differential buffer*/ #define RTC_CNTL_DBUF_XTAL_32K (BIT(9)) #define RTC_CNTL_DBUF_XTAL_32K_M (BIT(9)) #define RTC_CNTL_DBUF_XTAL_32K_V 0x1 #define RTC_CNTL_DBUF_XTAL_32K_S 9 /* RTC_CNTL_ENCKINIT_XTAL_32K : R/W ;bitpos:[8] ;default: 1'b0 ; */ /*description: apply an internal clock to help xtal 32k to start*/ #define RTC_CNTL_ENCKINIT_XTAL_32K (BIT(8)) #define RTC_CNTL_ENCKINIT_XTAL_32K_M (BIT(8)) #define RTC_CNTL_ENCKINIT_XTAL_32K_V 0x1 #define RTC_CNTL_ENCKINIT_XTAL_32K_S 8 /* RTC_CNTL_XTAL32K_XPD_FORCE : R/W ;bitpos:[7] ;default: 1'b1 ; */ /*description: Xtal 32k xpd control by sw or fsm*/ #define RTC_CNTL_XTAL32K_XPD_FORCE (BIT(7)) #define RTC_CNTL_XTAL32K_XPD_FORCE_M (BIT(7)) #define RTC_CNTL_XTAL32K_XPD_FORCE_V 0x1 #define RTC_CNTL_XTAL32K_XPD_FORCE_S 7 /* RTC_CNTL_XTAL32K_AUTO_RETURN : R/W ;bitpos:[6] ;default: 1'b0 ; */ /*description: xtal 32k switch back xtal when xtal is restarted*/ #define RTC_CNTL_XTAL32K_AUTO_RETURN (BIT(6)) #define RTC_CNTL_XTAL32K_AUTO_RETURN_M (BIT(6)) #define RTC_CNTL_XTAL32K_AUTO_RETURN_V 0x1 #define RTC_CNTL_XTAL32K_AUTO_RETURN_S 6 /* RTC_CNTL_XTAL32K_AUTO_RESTART : R/W ;bitpos:[5] ;default: 1'b0 ; */ /*description: xtal 32k restart xtal when xtal is dead*/ #define RTC_CNTL_XTAL32K_AUTO_RESTART (BIT(5)) #define RTC_CNTL_XTAL32K_AUTO_RESTART_M (BIT(5)) #define RTC_CNTL_XTAL32K_AUTO_RESTART_V 0x1 #define RTC_CNTL_XTAL32K_AUTO_RESTART_S 5 /* RTC_CNTL_XTAL32K_AUTO_BACKUP : R/W ;bitpos:[4] ;default: 1'b0 ; */ /*description: xtal 32k switch to back up clock when xtal is dead*/ #define RTC_CNTL_XTAL32K_AUTO_BACKUP (BIT(4)) #define RTC_CNTL_XTAL32K_AUTO_BACKUP_M (BIT(4)) #define RTC_CNTL_XTAL32K_AUTO_BACKUP_V 0x1 #define RTC_CNTL_XTAL32K_AUTO_BACKUP_S 4 /* RTC_CNTL_XTAL32K_EXT_CLK_FO : R/W ;bitpos:[3] ;default: 1'b0 ; */ /*description: xtal 32k external xtal clock force on*/ #define RTC_CNTL_XTAL32K_EXT_CLK_FO (BIT(3)) #define RTC_CNTL_XTAL32K_EXT_CLK_FO_M (BIT(3)) #define RTC_CNTL_XTAL32K_EXT_CLK_FO_V 0x1 #define RTC_CNTL_XTAL32K_EXT_CLK_FO_S 3 /* RTC_CNTL_XTAL32K_WDT_RESET : R/W ;bitpos:[2] ;default: 1'b0 ; */ /*description: xtal 32k watch dog sw reset*/ #define RTC_CNTL_XTAL32K_WDT_RESET (BIT(2)) #define RTC_CNTL_XTAL32K_WDT_RESET_M (BIT(2)) #define RTC_CNTL_XTAL32K_WDT_RESET_V 0x1 #define RTC_CNTL_XTAL32K_WDT_RESET_S 2 /* RTC_CNTL_XTAL32K_WDT_CLK_FO : R/W ;bitpos:[1] ;default: 1'b0 ; */ /*description: xtal 32k watch dog clock force on*/ #define RTC_CNTL_XTAL32K_WDT_CLK_FO (BIT(1)) #define RTC_CNTL_XTAL32K_WDT_CLK_FO_M (BIT(1)) #define RTC_CNTL_XTAL32K_WDT_CLK_FO_V 0x1 #define RTC_CNTL_XTAL32K_WDT_CLK_FO_S 1 /* RTC_CNTL_XTAL32K_WDT_EN : R/W ;bitpos:[0] ;default: 1'b0 ; */ /*description: xtal 32k watch dog enable*/ #define RTC_CNTL_XTAL32K_WDT_EN (BIT(0)) #define RTC_CNTL_XTAL32K_WDT_EN_M (BIT(0)) #define RTC_CNTL_XTAL32K_WDT_EN_V 0x1 #define RTC_CNTL_XTAL32K_WDT_EN_S 0 #define RTC_CNTL_EXT_WAKEUP_CONF_REG (DR_REG_RTCCNTL_BASE + 0x0064) /* RTC_CNTL_GPIO_WAKEUP_FILTER : R/W ;bitpos:[31] ;default: 1'b0 ; */ /*description: enable filter for gpio wakeup event*/ #define RTC_CNTL_GPIO_WAKEUP_FILTER (BIT(31)) #define RTC_CNTL_GPIO_WAKEUP_FILTER_M (BIT(31)) #define RTC_CNTL_GPIO_WAKEUP_FILTER_V 0x1 #define RTC_CNTL_GPIO_WAKEUP_FILTER_S 31 #define RTC_CNTL_SLP_REJECT_CONF_REG (DR_REG_RTCCNTL_BASE + 0x0068) /* RTC_CNTL_DEEP_SLP_REJECT_EN : R/W ;bitpos:[31] ;default: 1'b0 ; */ /*description: enable reject for deep sleep*/ #define RTC_CNTL_DEEP_SLP_REJECT_EN (BIT(31)) #define RTC_CNTL_DEEP_SLP_REJECT_EN_M (BIT(31)) #define RTC_CNTL_DEEP_SLP_REJECT_EN_V 0x1 #define RTC_CNTL_DEEP_SLP_REJECT_EN_S 31 /* RTC_CNTL_LIGHT_SLP_REJECT_EN : R/W ;bitpos:[30] ;default: 1'b0 ; */ /*description: enable reject for light sleep*/ #define RTC_CNTL_LIGHT_SLP_REJECT_EN (BIT(30)) #define RTC_CNTL_LIGHT_SLP_REJECT_EN_M (BIT(30)) #define RTC_CNTL_LIGHT_SLP_REJECT_EN_V 0x1 #define RTC_CNTL_LIGHT_SLP_REJECT_EN_S 30 /* RTC_CNTL_SLEEP_REJECT_ENA : R/W ;bitpos:[29:12] ;default: 17'd0 ; */ /*description: sleep reject enable*/ #define RTC_CNTL_SLEEP_REJECT_ENA 0x0003FFFF #define RTC_CNTL_SLEEP_REJECT_ENA_M ((RTC_CNTL_SLEEP_REJECT_ENA_V)<<(RTC_CNTL_SLEEP_REJECT_ENA_S)) #define RTC_CNTL_SLEEP_REJECT_ENA_V 0x3FFFF #define RTC_CNTL_SLEEP_REJECT_ENA_S 12 #define RTC_CNTL_CPU_PERIOD_CONF_REG (DR_REG_RTCCNTL_BASE + 0x006C) /* RTC_CNTL_CPUPERIOD_SEL : R/W ;bitpos:[31:30] ;default: 2'b00 ; */ /*description: */ #define RTC_CNTL_CPUPERIOD_SEL 0x00000003 #define RTC_CNTL_CPUPERIOD_SEL_M ((RTC_CNTL_CPUPERIOD_SEL_V)<<(RTC_CNTL_CPUPERIOD_SEL_S)) #define RTC_CNTL_CPUPERIOD_SEL_V 0x3 #define RTC_CNTL_CPUPERIOD_SEL_S 30 /* RTC_CNTL_CPUSEL_CONF : R/W ;bitpos:[29] ;default: 1'b0 ; */ /*description: CPU sel option*/ #define RTC_CNTL_CPUSEL_CONF (BIT(29)) #define RTC_CNTL_CPUSEL_CONF_M (BIT(29)) #define RTC_CNTL_CPUSEL_CONF_V 0x1 #define RTC_CNTL_CPUSEL_CONF_S 29 #define RTC_CNTL_CLK_CONF_REG (DR_REG_RTCCNTL_BASE + 0x0070) /* RTC_CNTL_ANA_CLK_RTC_SEL : R/W ;bitpos:[31:30] ;default: 2'd0 ; */ /*description: */ #define RTC_CNTL_ANA_CLK_RTC_SEL 0x00000003 #define RTC_CNTL_ANA_CLK_RTC_SEL_M ((RTC_CNTL_ANA_CLK_RTC_SEL_V)<<(RTC_CNTL_ANA_CLK_RTC_SEL_S)) #define RTC_CNTL_ANA_CLK_RTC_SEL_V 0x3 #define RTC_CNTL_ANA_CLK_RTC_SEL_S 30 /* RTC_CNTL_FAST_CLK_RTC_SEL : R/W ;bitpos:[29] ;default: 1'b0 ; */ /*description: fast_clk_rtc sel. 0: XTAL div 4*/ #define RTC_CNTL_FAST_CLK_RTC_SEL (BIT(29)) #define RTC_CNTL_FAST_CLK_RTC_SEL_M (BIT(29)) #define RTC_CNTL_FAST_CLK_RTC_SEL_V 0x1 #define RTC_CNTL_FAST_CLK_RTC_SEL_S 29 /* RTC_CNTL_XTAL_GLOBAL_FORCE_NOGATING : R/W ;bitpos:[28] ;default: 1'b1 ; */ /*description: */ #define RTC_CNTL_XTAL_GLOBAL_FORCE_NOGATING (BIT(28)) #define RTC_CNTL_XTAL_GLOBAL_FORCE_NOGATING_M (BIT(28)) #define RTC_CNTL_XTAL_GLOBAL_FORCE_NOGATING_V 0x1 #define RTC_CNTL_XTAL_GLOBAL_FORCE_NOGATING_S 28 /* RTC_CNTL_XTAL_GLOBAL_FORCE_GATING : R/W ;bitpos:[27] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_XTAL_GLOBAL_FORCE_GATING (BIT(27)) #define RTC_CNTL_XTAL_GLOBAL_FORCE_GATING_M (BIT(27)) #define RTC_CNTL_XTAL_GLOBAL_FORCE_GATING_V 0x1 #define RTC_CNTL_XTAL_GLOBAL_FORCE_GATING_S 27 /* RTC_CNTL_CK8M_FORCE_PU : R/W ;bitpos:[26] ;default: 1'd0 ; */ /*description: CK8M force power up*/ #define RTC_CNTL_CK8M_FORCE_PU (BIT(26)) #define RTC_CNTL_CK8M_FORCE_PU_M (BIT(26)) #define RTC_CNTL_CK8M_FORCE_PU_V 0x1 #define RTC_CNTL_CK8M_FORCE_PU_S 26 /* RTC_CNTL_CK8M_FORCE_PD : R/W ;bitpos:[25] ;default: 1'd0 ; */ /*description: CK8M force power down*/ #define RTC_CNTL_CK8M_FORCE_PD (BIT(25)) #define RTC_CNTL_CK8M_FORCE_PD_M (BIT(25)) #define RTC_CNTL_CK8M_FORCE_PD_V 0x1 #define RTC_CNTL_CK8M_FORCE_PD_S 25 /* RTC_CNTL_CK8M_DFREQ : R/W ;bitpos:[24:17] ;default: 8'd172 ; */ /*description: CK8M_DFREQ*/ #define RTC_CNTL_CK8M_DFREQ 0x000000FF #define RTC_CNTL_CK8M_DFREQ_M ((RTC_CNTL_CK8M_DFREQ_V)<<(RTC_CNTL_CK8M_DFREQ_S)) #define RTC_CNTL_CK8M_DFREQ_V 0xFF #define RTC_CNTL_CK8M_DFREQ_S 17 /* RTC_CNTL_CK8M_FORCE_NOGATING : R/W ;bitpos:[16] ;default: 1'd0 ; */ /*description: CK8M force no gating during sleep*/ #define RTC_CNTL_CK8M_FORCE_NOGATING (BIT(16)) #define RTC_CNTL_CK8M_FORCE_NOGATING_M (BIT(16)) #define RTC_CNTL_CK8M_FORCE_NOGATING_V 0x1 #define RTC_CNTL_CK8M_FORCE_NOGATING_S 16 /* RTC_CNTL_XTAL_FORCE_NOGATING : R/W ;bitpos:[15] ;default: 1'd0 ; */ /*description: XTAL force no gating during sleep*/ #define RTC_CNTL_XTAL_FORCE_NOGATING (BIT(15)) #define RTC_CNTL_XTAL_FORCE_NOGATING_M (BIT(15)) #define RTC_CNTL_XTAL_FORCE_NOGATING_V 0x1 #define RTC_CNTL_XTAL_FORCE_NOGATING_S 15 /* RTC_CNTL_CK8M_DIV_SEL : R/W ;bitpos:[14:12] ;default: 3'd3 ; */ /*description: divider = reg_ck8m_div_sel + 1*/ #define RTC_CNTL_CK8M_DIV_SEL 0x00000007 #define RTC_CNTL_CK8M_DIV_SEL_M ((RTC_CNTL_CK8M_DIV_SEL_V)<<(RTC_CNTL_CK8M_DIV_SEL_S)) #define RTC_CNTL_CK8M_DIV_SEL_V 0x7 #define RTC_CNTL_CK8M_DIV_SEL_S 12 /* RTC_CNTL_DIG_CLK8M_EN : R/W ;bitpos:[10] ;default: 1'd0 ; */ /*description: enable CK8M for digital core (no relationship with RTC core)*/ #define RTC_CNTL_DIG_CLK8M_EN (BIT(10)) #define RTC_CNTL_DIG_CLK8M_EN_M (BIT(10)) #define RTC_CNTL_DIG_CLK8M_EN_V 0x1 #define RTC_CNTL_DIG_CLK8M_EN_S 10 /* RTC_CNTL_DIG_CLK8M_D256_EN : R/W ;bitpos:[9] ;default: 1'd1 ; */ /*description: enable CK8M_D256_OUT for digital core (no relationship with RTC core)*/ #define RTC_CNTL_DIG_CLK8M_D256_EN (BIT(9)) #define RTC_CNTL_DIG_CLK8M_D256_EN_M (BIT(9)) #define RTC_CNTL_DIG_CLK8M_D256_EN_V 0x1 #define RTC_CNTL_DIG_CLK8M_D256_EN_S 9 /* RTC_CNTL_DIG_XTAL32K_EN : R/W ;bitpos:[8] ;default: 1'd0 ; */ /*description: enable CK_XTAL_32K for digital core (no relationship with RTC core)*/ #define RTC_CNTL_DIG_XTAL32K_EN (BIT(8)) #define RTC_CNTL_DIG_XTAL32K_EN_M (BIT(8)) #define RTC_CNTL_DIG_XTAL32K_EN_V 0x1 #define RTC_CNTL_DIG_XTAL32K_EN_S 8 /* RTC_CNTL_ENB_CK8M_DIV : R/W ;bitpos:[7] ;default: 1'd0 ; */ /*description: 1: CK8M_D256_OUT is actually CK8M*/ #define RTC_CNTL_ENB_CK8M_DIV (BIT(7)) #define RTC_CNTL_ENB_CK8M_DIV_M (BIT(7)) #define RTC_CNTL_ENB_CK8M_DIV_V 0x1 #define RTC_CNTL_ENB_CK8M_DIV_S 7 /* RTC_CNTL_ENB_CK8M : R/W ;bitpos:[6] ;default: 1'd0 ; */ /*description: disable CK8M and CK8M_D256_OUT*/ #define RTC_CNTL_ENB_CK8M (BIT(6)) #define RTC_CNTL_ENB_CK8M_M (BIT(6)) #define RTC_CNTL_ENB_CK8M_V 0x1 #define RTC_CNTL_ENB_CK8M_S 6 /* RTC_CNTL_CK8M_DIV : R/W ;bitpos:[5:4] ;default: 2'b01 ; */ /*description: CK8M_D256_OUT divider. 00: div128*/ #define RTC_CNTL_CK8M_DIV 0x00000003 #define RTC_CNTL_CK8M_DIV_M ((RTC_CNTL_CK8M_DIV_V)<<(RTC_CNTL_CK8M_DIV_S)) #define RTC_CNTL_CK8M_DIV_V 0x3 #define RTC_CNTL_CK8M_DIV_S 4 /* RTC_CNTL_CK8M_DIV_SEL_VLD : R/W ;bitpos:[3] ;default: 1'b1 ; */ /*description: used to sync reg_ck8m_div_sel bus. Clear vld before set reg_ck8m_div_sel*/ #define RTC_CNTL_CK8M_DIV_SEL_VLD (BIT(3)) #define RTC_CNTL_CK8M_DIV_SEL_VLD_M (BIT(3)) #define RTC_CNTL_CK8M_DIV_SEL_VLD_V 0x1 #define RTC_CNTL_CK8M_DIV_SEL_VLD_S 3 /* RTC_CNTL_EFUSE_CLK_FORCE_NOGATING : R/W ;bitpos:[2] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_EFUSE_CLK_FORCE_NOGATING (BIT(2)) #define RTC_CNTL_EFUSE_CLK_FORCE_NOGATING_M (BIT(2)) #define RTC_CNTL_EFUSE_CLK_FORCE_NOGATING_V 0x1 #define RTC_CNTL_EFUSE_CLK_FORCE_NOGATING_S 2 /* RTC_CNTL_EFUSE_CLK_FORCE_GATING : R/W ;bitpos:[1] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_EFUSE_CLK_FORCE_GATING (BIT(1)) #define RTC_CNTL_EFUSE_CLK_FORCE_GATING_M (BIT(1)) #define RTC_CNTL_EFUSE_CLK_FORCE_GATING_V 0x1 #define RTC_CNTL_EFUSE_CLK_FORCE_GATING_S 1 #define RTC_CNTL_SLOW_CLK_CONF_REG (DR_REG_RTCCNTL_BASE + 0x0074) /* RTC_CNTL_SLOW_CLK_NEXT_EDGE : R/W ;bitpos:[31] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_SLOW_CLK_NEXT_EDGE (BIT(31)) #define RTC_CNTL_SLOW_CLK_NEXT_EDGE_M (BIT(31)) #define RTC_CNTL_SLOW_CLK_NEXT_EDGE_V 0x1 #define RTC_CNTL_SLOW_CLK_NEXT_EDGE_S 31 /* RTC_CNTL_ANA_CLK_DIV : R/W ;bitpos:[30:23] ;default: 8'd0 ; */ /*description: */ #define RTC_CNTL_ANA_CLK_DIV 0x000000FF #define RTC_CNTL_ANA_CLK_DIV_M ((RTC_CNTL_ANA_CLK_DIV_V)<<(RTC_CNTL_ANA_CLK_DIV_S)) #define RTC_CNTL_ANA_CLK_DIV_V 0xFF #define RTC_CNTL_ANA_CLK_DIV_S 23 /* RTC_CNTL_ANA_CLK_DIV_VLD : R/W ;bitpos:[22] ;default: 1'b1 ; */ /*description: used to sync div bus. clear vld before set reg_rtc_ana_clk_div*/ #define RTC_CNTL_ANA_CLK_DIV_VLD (BIT(22)) #define RTC_CNTL_ANA_CLK_DIV_VLD_M (BIT(22)) #define RTC_CNTL_ANA_CLK_DIV_VLD_V 0x1 #define RTC_CNTL_ANA_CLK_DIV_VLD_S 22 #define RTC_CNTL_SDIO_CONF_REG (DR_REG_RTCCNTL_BASE + 0x0078) /* RTC_CNTL_XPD_SDIO_REG : R/W ;bitpos:[31] ;default: 1'd0 ; */ /*description: */ #define RTC_CNTL_XPD_SDIO_REG (BIT(31)) #define RTC_CNTL_XPD_SDIO_REG_M (BIT(31)) #define RTC_CNTL_XPD_SDIO_REG_V 0x1 #define RTC_CNTL_XPD_SDIO_REG_S 31 /* RTC_CNTL_DREFH_SDIO : R/W ;bitpos:[30:29] ;default: 2'b00 ; */ /*description: SW option for DREFH_SDIO. Only active when reg_sdio_force = 1*/ #define RTC_CNTL_DREFH_SDIO 0x00000003 #define RTC_CNTL_DREFH_SDIO_M ((RTC_CNTL_DREFH_SDIO_V)<<(RTC_CNTL_DREFH_SDIO_S)) #define RTC_CNTL_DREFH_SDIO_V 0x3 #define RTC_CNTL_DREFH_SDIO_S 29 /* RTC_CNTL_DREFM_SDIO : R/W ;bitpos:[28:27] ;default: 2'b01 ; */ /*description: SW option for DREFM_SDIO. Only active when reg_sdio_force = 1*/ #define RTC_CNTL_DREFM_SDIO 0x00000003 #define RTC_CNTL_DREFM_SDIO_M ((RTC_CNTL_DREFM_SDIO_V)<<(RTC_CNTL_DREFM_SDIO_S)) #define RTC_CNTL_DREFM_SDIO_V 0x3 #define RTC_CNTL_DREFM_SDIO_S 27 /* RTC_CNTL_DREFL_SDIO : R/W ;bitpos:[26:25] ;default: 2'b01 ; */ /*description: SW option for DREFL_SDIO. Only active when reg_sdio_force = 1*/ #define RTC_CNTL_DREFL_SDIO 0x00000003 #define RTC_CNTL_DREFL_SDIO_M ((RTC_CNTL_DREFL_SDIO_V)<<(RTC_CNTL_DREFL_SDIO_S)) #define RTC_CNTL_DREFL_SDIO_V 0x3 #define RTC_CNTL_DREFL_SDIO_S 25 /* RTC_CNTL_REG1P8_READY : RO ;bitpos:[24] ;default: 1'd0 ; */ /*description: read only register for REG1P8_READY*/ #define RTC_CNTL_REG1P8_READY (BIT(24)) #define RTC_CNTL_REG1P8_READY_M (BIT(24)) #define RTC_CNTL_REG1P8_READY_V 0x1 #define RTC_CNTL_REG1P8_READY_S 24 /* RTC_CNTL_SDIO_TIEH : R/W ;bitpos:[23] ;default: 1'd1 ; */ /*description: SW option for SDIO_TIEH. Only active when reg_sdio_force = 1*/ #define RTC_CNTL_SDIO_TIEH (BIT(23)) #define RTC_CNTL_SDIO_TIEH_M (BIT(23)) #define RTC_CNTL_SDIO_TIEH_V 0x1 #define RTC_CNTL_SDIO_TIEH_S 23 /* RTC_CNTL_SDIO_FORCE : R/W ;bitpos:[22] ;default: 1'd0 ; */ /*description: 1: use SW option to control SDIO_REG*/ #define RTC_CNTL_SDIO_FORCE (BIT(22)) #define RTC_CNTL_SDIO_FORCE_M (BIT(22)) #define RTC_CNTL_SDIO_FORCE_V 0x1 #define RTC_CNTL_SDIO_FORCE_S 22 /* RTC_CNTL_SDIO_PD_EN : R/W ;bitpos:[21] ;default: 1'd1 ; */ /*description: power down SDIO_REG in sleep. Only active when reg_sdio_force = 0*/ #define RTC_CNTL_SDIO_PD_EN (BIT(21)) #define RTC_CNTL_SDIO_PD_EN_M (BIT(21)) #define RTC_CNTL_SDIO_PD_EN_V 0x1 #define RTC_CNTL_SDIO_PD_EN_S 21 /* RTC_CNTL_SDIO_ENCURLIM : R/W ;bitpos:[20] ;default: 1'd1 ; */ /*description: enable current limit*/ #define RTC_CNTL_SDIO_ENCURLIM (BIT(20)) #define RTC_CNTL_SDIO_ENCURLIM_M (BIT(20)) #define RTC_CNTL_SDIO_ENCURLIM_V 0x1 #define RTC_CNTL_SDIO_ENCURLIM_S 20 /* RTC_CNTL_SDIO_MODECURLIM : R/W ;bitpos:[19] ;default: 1'd0 ; */ /*description: select current limit mode*/ #define RTC_CNTL_SDIO_MODECURLIM (BIT(19)) #define RTC_CNTL_SDIO_MODECURLIM_M (BIT(19)) #define RTC_CNTL_SDIO_MODECURLIM_V 0x1 #define RTC_CNTL_SDIO_MODECURLIM_S 19 /* RTC_CNTL_SDIO_DCURLIM : R/W ;bitpos:[18:16] ;default: 3'd0 ; */ /*description: tune current limit threshold when tieh = 0. About 800mA/(8+d)*/ #define RTC_CNTL_SDIO_DCURLIM 0x00000007 #define RTC_CNTL_SDIO_DCURLIM_M ((RTC_CNTL_SDIO_DCURLIM_V)<<(RTC_CNTL_SDIO_DCURLIM_S)) #define RTC_CNTL_SDIO_DCURLIM_V 0x7 #define RTC_CNTL_SDIO_DCURLIM_S 16 /* RTC_CNTL_SDIO_EN_INITI : R/W ;bitpos:[15] ;default: 1'd1 ; */ /*description: 0 to set init[1:0]=0*/ #define RTC_CNTL_SDIO_EN_INITI (BIT(15)) #define RTC_CNTL_SDIO_EN_INITI_M (BIT(15)) #define RTC_CNTL_SDIO_EN_INITI_V 0x1 #define RTC_CNTL_SDIO_EN_INITI_S 15 /* RTC_CNTL_SDIO_INITI : R/W ;bitpos:[14:13] ;default: 2'd1 ; */ /*description: add resistor from ldo output to ground. 0: no res*/ #define RTC_CNTL_SDIO_INITI 0x00000003 #define RTC_CNTL_SDIO_INITI_M ((RTC_CNTL_SDIO_INITI_V)<<(RTC_CNTL_SDIO_INITI_S)) #define RTC_CNTL_SDIO_INITI_V 0x3 #define RTC_CNTL_SDIO_INITI_S 13 /* RTC_CNTL_SDIO_DCAP : R/W ;bitpos:[12:11] ;default: 2'b11 ; */ /*description: ability to prevent LDO from overshoot*/ #define RTC_CNTL_SDIO_DCAP 0x00000003 #define RTC_CNTL_SDIO_DCAP_M ((RTC_CNTL_SDIO_DCAP_V)<<(RTC_CNTL_SDIO_DCAP_S)) #define RTC_CNTL_SDIO_DCAP_V 0x3 #define RTC_CNTL_SDIO_DCAP_S 11 /* RTC_CNTL_SDIO_DTHDRV : R/W ;bitpos:[10:9] ;default: 2'b11 ; */ /*description: Tieh = 1 mode drive ability. Initially set to 0 to limit charge current*/ #define RTC_CNTL_SDIO_DTHDRV 0x00000003 #define RTC_CNTL_SDIO_DTHDRV_M ((RTC_CNTL_SDIO_DTHDRV_V)<<(RTC_CNTL_SDIO_DTHDRV_S)) #define RTC_CNTL_SDIO_DTHDRV_V 0x3 #define RTC_CNTL_SDIO_DTHDRV_S 9 /* RTC_CNTL_SDIO_TIMER_TARGET : R/W ;bitpos:[7:0] ;default: 8'd10 ; */ /*description: timer count to apply reg_sdio_dcap after sdio power on*/ #define RTC_CNTL_SDIO_TIMER_TARGET 0x000000FF #define RTC_CNTL_SDIO_TIMER_TARGET_M ((RTC_CNTL_SDIO_TIMER_TARGET_V)<<(RTC_CNTL_SDIO_TIMER_TARGET_S)) #define RTC_CNTL_SDIO_TIMER_TARGET_V 0xFF #define RTC_CNTL_SDIO_TIMER_TARGET_S 0 #define RTC_CNTL_BIAS_CONF_REG (DR_REG_RTCCNTL_BASE + 0x007C) /* RTC_CNTL_DBG_ATTEN_MONITOR : R/W ;bitpos:[25:22] ;default: 4'd0 ; */ /*description: DBG_ATTEN when rtc in monitor state*/ #define RTC_CNTL_DBG_ATTEN_MONITOR 0x0000000F #define RTC_CNTL_DBG_ATTEN_MONITOR_M ((RTC_CNTL_DBG_ATTEN_MONITOR_V)<<(RTC_CNTL_DBG_ATTEN_MONITOR_S)) #define RTC_CNTL_DBG_ATTEN_MONITOR_V 0xF #define RTC_CNTL_DBG_ATTEN_MONITOR_S 22 /* RTC_CNTL_DBG_ATTEN_DEEP_SLP : R/W ;bitpos:[21:18] ;default: 4'd0 ; */ /*description: DBG_ATTEN when rtc in sleep state*/ #define RTC_CNTL_DBG_ATTEN_DEEP_SLP 0x0000000F #define RTC_CNTL_DBG_ATTEN_DEEP_SLP_M ((RTC_CNTL_DBG_ATTEN_DEEP_SLP_V)<<(RTC_CNTL_DBG_ATTEN_DEEP_SLP_S)) #define RTC_CNTL_DBG_ATTEN_DEEP_SLP_V 0xF #define RTC_CNTL_DBG_ATTEN_DEEP_SLP_S 18 /* RTC_CNTL_BIAS_SLEEP_MONITOR : R/W ;bitpos:[17] ;default: 1'b0 ; */ /*description: bias_sleep when rtc in monitor state*/ #define RTC_CNTL_BIAS_SLEEP_MONITOR (BIT(17)) #define RTC_CNTL_BIAS_SLEEP_MONITOR_M (BIT(17)) #define RTC_CNTL_BIAS_SLEEP_MONITOR_V 0x1 #define RTC_CNTL_BIAS_SLEEP_MONITOR_S 17 /* RTC_CNTL_BIAS_SLEEP_DEEP_SLP : R/W ;bitpos:[16] ;default: 1'b1 ; */ /*description: bias_sleep when rtc in sleep_state*/ #define RTC_CNTL_BIAS_SLEEP_DEEP_SLP (BIT(16)) #define RTC_CNTL_BIAS_SLEEP_DEEP_SLP_M (BIT(16)) #define RTC_CNTL_BIAS_SLEEP_DEEP_SLP_V 0x1 #define RTC_CNTL_BIAS_SLEEP_DEEP_SLP_S 16 /* RTC_CNTL_PD_CUR_MONITOR : R/W ;bitpos:[15] ;default: 1'b0 ; */ /*description: xpd cur when rtc in monitor state*/ #define RTC_CNTL_PD_CUR_MONITOR (BIT(15)) #define RTC_CNTL_PD_CUR_MONITOR_M (BIT(15)) #define RTC_CNTL_PD_CUR_MONITOR_V 0x1 #define RTC_CNTL_PD_CUR_MONITOR_S 15 /* RTC_CNTL_PD_CUR_DEEP_SLP : R/W ;bitpos:[14] ;default: 1'b0 ; */ /*description: xpd cur when rtc in sleep_state*/ #define RTC_CNTL_PD_CUR_DEEP_SLP (BIT(14)) #define RTC_CNTL_PD_CUR_DEEP_SLP_M (BIT(14)) #define RTC_CNTL_PD_CUR_DEEP_SLP_V 0x1 #define RTC_CNTL_PD_CUR_DEEP_SLP_S 14 /* RTC_CNTL_BIAS_BUF_MONITOR : R/W ;bitpos:[13] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BIAS_BUF_MONITOR (BIT(13)) #define RTC_CNTL_BIAS_BUF_MONITOR_M (BIT(13)) #define RTC_CNTL_BIAS_BUF_MONITOR_V 0x1 #define RTC_CNTL_BIAS_BUF_MONITOR_S 13 /* RTC_CNTL_BIAS_BUF_DEEP_SLP : R/W ;bitpos:[12] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BIAS_BUF_DEEP_SLP (BIT(12)) #define RTC_CNTL_BIAS_BUF_DEEP_SLP_M (BIT(12)) #define RTC_CNTL_BIAS_BUF_DEEP_SLP_V 0x1 #define RTC_CNTL_BIAS_BUF_DEEP_SLP_S 12 /* RTC_CNTL_BIAS_BUF_WAKE : R/W ;bitpos:[11] ;default: 1'b1 ; */ /*description: */ #define RTC_CNTL_BIAS_BUF_WAKE (BIT(11)) #define RTC_CNTL_BIAS_BUF_WAKE_M (BIT(11)) #define RTC_CNTL_BIAS_BUF_WAKE_V 0x1 #define RTC_CNTL_BIAS_BUF_WAKE_S 11 /* RTC_CNTL_BIAS_BUF_IDLE : R/W ;bitpos:[10] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BIAS_BUF_IDLE (BIT(10)) #define RTC_CNTL_BIAS_BUF_IDLE_M (BIT(10)) #define RTC_CNTL_BIAS_BUF_IDLE_V 0x1 #define RTC_CNTL_BIAS_BUF_IDLE_S 10 /* RTC_CNTL_DG_VDD_DRV_B_SLP_EN : R/W ;bitpos:[8] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_DG_VDD_DRV_B_SLP_EN (BIT(8)) #define RTC_CNTL_DG_VDD_DRV_B_SLP_EN_M (BIT(8)) #define RTC_CNTL_DG_VDD_DRV_B_SLP_EN_V 0x1 #define RTC_CNTL_DG_VDD_DRV_B_SLP_EN_S 8 /* RTC_CNTL_DG_VDD_DRV_B_SLP : R/W ;bitpos:[7:0] ;default: 8'h0 ; */ /*description: */ #define RTC_CNTL_DG_VDD_DRV_B_SLP 0x000000FF #define RTC_CNTL_DG_VDD_DRV_B_SLP_M ((RTC_CNTL_DG_VDD_DRV_B_SLP_V)<<(RTC_CNTL_DG_VDD_DRV_B_SLP_S)) #define RTC_CNTL_DG_VDD_DRV_B_SLP_V 0xFF #define RTC_CNTL_DG_VDD_DRV_B_SLP_S 0 #define RTC_CNTL_REG (DR_REG_RTCCNTL_BASE + 0x0080) /* RTC_CNTL_REGULATOR_FORCE_PU : R/W ;bitpos:[31] ;default: 1'd1 ; */ /*description: */ #define RTC_CNTL_REGULATOR_FORCE_PU (BIT(31)) #define RTC_CNTL_REGULATOR_FORCE_PU_M (BIT(31)) #define RTC_CNTL_REGULATOR_FORCE_PU_V 0x1 #define RTC_CNTL_REGULATOR_FORCE_PU_S 31 /* RTC_CNTL_REGULATOR_FORCE_PD : R/W ;bitpos:[30] ;default: 1'd0 ; */ /*description: RTC_REG force power down (for RTC_REG power down means decrease the voltage to 0.8v or lower )*/ #define RTC_CNTL_REGULATOR_FORCE_PD (BIT(30)) #define RTC_CNTL_REGULATOR_FORCE_PD_M (BIT(30)) #define RTC_CNTL_REGULATOR_FORCE_PD_V 0x1 #define RTC_CNTL_REGULATOR_FORCE_PD_S 30 /* RTC_CNTL_DBOOST_FORCE_PU : R/W ;bitpos:[29] ;default: 1'd1 ; */ /*description: RTC_DBOOST force power up*/ #define RTC_CNTL_DBOOST_FORCE_PU (BIT(29)) #define RTC_CNTL_DBOOST_FORCE_PU_M (BIT(29)) #define RTC_CNTL_DBOOST_FORCE_PU_V 0x1 #define RTC_CNTL_DBOOST_FORCE_PU_S 29 /* RTC_CNTL_DBOOST_FORCE_PD : R/W ;bitpos:[28] ;default: 1'd0 ; */ /*description: RTC_DBOOST force power down*/ #define RTC_CNTL_DBOOST_FORCE_PD (BIT(28)) #define RTC_CNTL_DBOOST_FORCE_PD_M (BIT(28)) #define RTC_CNTL_DBOOST_FORCE_PD_V 0x1 #define RTC_CNTL_DBOOST_FORCE_PD_S 28 /* RTC_CNTL_SCK_DCAP : R/W ;bitpos:[21:14] ;default: 8'd0 ; */ /*description: SCK_DCAP*/ #define RTC_CNTL_SCK_DCAP 0x000000FF #define RTC_CNTL_SCK_DCAP_M ((RTC_CNTL_SCK_DCAP_V)<<(RTC_CNTL_SCK_DCAP_S)) #define RTC_CNTL_SCK_DCAP_V 0xFF #define RTC_CNTL_SCK_DCAP_S 14 #define RTC_CNTL_SCK_DCAP_DEFAULT 255 /* RTC_CNTL_DIG_CAL_EN : R/W ;bitpos:[7] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_DIG_CAL_EN (BIT(7)) #define RTC_CNTL_DIG_CAL_EN_M (BIT(7)) #define RTC_CNTL_DIG_CAL_EN_V 0x1 #define RTC_CNTL_DIG_CAL_EN_S 7 #define RTC_CNTL_PWC_REG (DR_REG_RTCCNTL_BASE + 0x0084) /* RTC_CNTL_PAD_FORCE_HOLD : R/W ;bitpos:[21] ;default: 1'd0 ; */ /*description: rtc pad force hold*/ #define RTC_CNTL_PAD_FORCE_HOLD (BIT(21)) #define RTC_CNTL_PAD_FORCE_HOLD_M (BIT(21)) #define RTC_CNTL_PAD_FORCE_HOLD_V 0x1 #define RTC_CNTL_PAD_FORCE_HOLD_S 21 #define RTC_CNTL_DIG_PWC_REG (DR_REG_RTCCNTL_BASE + 0x0088) /* RTC_CNTL_DG_WRAP_PD_EN : R/W ;bitpos:[31] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_DG_WRAP_PD_EN (BIT(31)) #define RTC_CNTL_DG_WRAP_PD_EN_M (BIT(31)) #define RTC_CNTL_DG_WRAP_PD_EN_V 0x1 #define RTC_CNTL_DG_WRAP_PD_EN_S 31 /* RTC_CNTL_WIFI_PD_EN : R/W ;bitpos:[30] ;default: 1'b0 ; */ /*description: enable power down wifi in sleep*/ #define RTC_CNTL_WIFI_PD_EN (BIT(30)) #define RTC_CNTL_WIFI_PD_EN_M (BIT(30)) #define RTC_CNTL_WIFI_PD_EN_V 0x1 #define RTC_CNTL_WIFI_PD_EN_S 30 /* RTC_CNTL_CPU_TOP_PD_EN : R/W ;bitpos:[29] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_CPU_TOP_PD_EN (BIT(29)) #define RTC_CNTL_CPU_TOP_PD_EN_M (BIT(29)) #define RTC_CNTL_CPU_TOP_PD_EN_V 0x1 #define RTC_CNTL_CPU_TOP_PD_EN_S 29 /* RTC_CNTL_DG_PERI_PD_EN : R/W ;bitpos:[28] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_DG_PERI_PD_EN (BIT(28)) #define RTC_CNTL_DG_PERI_PD_EN_M (BIT(28)) #define RTC_CNTL_DG_PERI_PD_EN_V 0x1 #define RTC_CNTL_DG_PERI_PD_EN_S 28 /* RTC_CNTL_BT_PD_EN : R/W ;bitpos:[27] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BT_PD_EN (BIT(27)) #define RTC_CNTL_BT_PD_EN_M (BIT(27)) #define RTC_CNTL_BT_PD_EN_V 0x1 #define RTC_CNTL_BT_PD_EN_S 27 /* RTC_CNTL_CPU_TOP_FORCE_PU : R/W ;bitpos:[22] ;default: 1'b1 ; */ /*description: */ #define RTC_CNTL_CPU_TOP_FORCE_PU (BIT(22)) #define RTC_CNTL_CPU_TOP_FORCE_PU_M (BIT(22)) #define RTC_CNTL_CPU_TOP_FORCE_PU_V 0x1 #define RTC_CNTL_CPU_TOP_FORCE_PU_S 22 /* RTC_CNTL_CPU_TOP_FORCE_PD : R/W ;bitpos:[21] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_CPU_TOP_FORCE_PD (BIT(21)) #define RTC_CNTL_CPU_TOP_FORCE_PD_M (BIT(21)) #define RTC_CNTL_CPU_TOP_FORCE_PD_V 0x1 #define RTC_CNTL_CPU_TOP_FORCE_PD_S 21 /* RTC_CNTL_DG_WRAP_FORCE_PU : R/W ;bitpos:[20] ;default: 1'd1 ; */ /*description: digital core force power up*/ #define RTC_CNTL_DG_WRAP_FORCE_PU (BIT(20)) #define RTC_CNTL_DG_WRAP_FORCE_PU_M (BIT(20)) #define RTC_CNTL_DG_WRAP_FORCE_PU_V 0x1 #define RTC_CNTL_DG_WRAP_FORCE_PU_S 20 /* RTC_CNTL_DG_WRAP_FORCE_PD : R/W ;bitpos:[19] ;default: 1'b0 ; */ /*description: digital core force power down*/ #define RTC_CNTL_DG_WRAP_FORCE_PD (BIT(19)) #define RTC_CNTL_DG_WRAP_FORCE_PD_M (BIT(19)) #define RTC_CNTL_DG_WRAP_FORCE_PD_V 0x1 #define RTC_CNTL_DG_WRAP_FORCE_PD_S 19 /* RTC_CNTL_WIFI_FORCE_PU : R/W ;bitpos:[18] ;default: 1'd1 ; */ /*description: wifi force power up*/ #define RTC_CNTL_WIFI_FORCE_PU (BIT(18)) #define RTC_CNTL_WIFI_FORCE_PU_M (BIT(18)) #define RTC_CNTL_WIFI_FORCE_PU_V 0x1 #define RTC_CNTL_WIFI_FORCE_PU_S 18 /* RTC_CNTL_WIFI_FORCE_PD : R/W ;bitpos:[17] ;default: 1'b0 ; */ /*description: wifi force power down*/ #define RTC_CNTL_WIFI_FORCE_PD (BIT(17)) #define RTC_CNTL_WIFI_FORCE_PD_M (BIT(17)) #define RTC_CNTL_WIFI_FORCE_PD_V 0x1 #define RTC_CNTL_WIFI_FORCE_PD_S 17 /* RTC_CNTL_FASTMEM_FORCE_LPU : R/W ;bitpos:[16] ;default: 1'b1 ; */ /*description: */ #define RTC_CNTL_FASTMEM_FORCE_LPU (BIT(16)) #define RTC_CNTL_FASTMEM_FORCE_LPU_M (BIT(16)) #define RTC_CNTL_FASTMEM_FORCE_LPU_V 0x1 #define RTC_CNTL_FASTMEM_FORCE_LPU_S 16 /* RTC_CNTL_FASTMEM_FORCE_LPD : R/W ;bitpos:[15] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_FASTMEM_FORCE_LPD (BIT(15)) #define RTC_CNTL_FASTMEM_FORCE_LPD_M (BIT(15)) #define RTC_CNTL_FASTMEM_FORCE_LPD_V 0x1 #define RTC_CNTL_FASTMEM_FORCE_LPD_S 15 /* RTC_CNTL_DG_PERI_FORCE_PU : R/W ;bitpos:[14] ;default: 1'b1 ; */ /*description: */ #define RTC_CNTL_DG_PERI_FORCE_PU (BIT(14)) #define RTC_CNTL_DG_PERI_FORCE_PU_M (BIT(14)) #define RTC_CNTL_DG_PERI_FORCE_PU_V 0x1 #define RTC_CNTL_DG_PERI_FORCE_PU_S 14 /* RTC_CNTL_DG_PERI_FORCE_PD : R/W ;bitpos:[13] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_DG_PERI_FORCE_PD (BIT(13)) #define RTC_CNTL_DG_PERI_FORCE_PD_M (BIT(13)) #define RTC_CNTL_DG_PERI_FORCE_PD_V 0x1 #define RTC_CNTL_DG_PERI_FORCE_PD_S 13 /* RTC_CNTL_BT_FORCE_PU : R/W ;bitpos:[12] ;default: 1'd1 ; */ /*description: */ #define RTC_CNTL_BT_FORCE_PU (BIT(12)) #define RTC_CNTL_BT_FORCE_PU_M (BIT(12)) #define RTC_CNTL_BT_FORCE_PU_V 0x1 #define RTC_CNTL_BT_FORCE_PU_S 12 /* RTC_CNTL_BT_FORCE_PD : R/W ;bitpos:[11] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BT_FORCE_PD (BIT(11)) #define RTC_CNTL_BT_FORCE_PD_M (BIT(11)) #define RTC_CNTL_BT_FORCE_PD_V 0x1 #define RTC_CNTL_BT_FORCE_PD_S 11 /* RTC_CNTL_LSLP_MEM_FORCE_PU : R/W ;bitpos:[4] ;default: 1'b1 ; */ /*description: memories in digital core force no PD in sleep*/ #define RTC_CNTL_LSLP_MEM_FORCE_PU (BIT(4)) #define RTC_CNTL_LSLP_MEM_FORCE_PU_M (BIT(4)) #define RTC_CNTL_LSLP_MEM_FORCE_PU_V 0x1 #define RTC_CNTL_LSLP_MEM_FORCE_PU_S 4 /* RTC_CNTL_LSLP_MEM_FORCE_PD : R/W ;bitpos:[3] ;default: 1'b0 ; */ /*description: memories in digital core force PD in sleep*/ #define RTC_CNTL_LSLP_MEM_FORCE_PD (BIT(3)) #define RTC_CNTL_LSLP_MEM_FORCE_PD_M (BIT(3)) #define RTC_CNTL_LSLP_MEM_FORCE_PD_V 0x1 #define RTC_CNTL_LSLP_MEM_FORCE_PD_S 3 /* RTC_CNTL_VDD_SPI_PWR_FORCE : R/W ;bitpos:[2] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_VDD_SPI_PWR_FORCE (BIT(2)) #define RTC_CNTL_VDD_SPI_PWR_FORCE_M (BIT(2)) #define RTC_CNTL_VDD_SPI_PWR_FORCE_V 0x1 #define RTC_CNTL_VDD_SPI_PWR_FORCE_S 2 /* RTC_CNTL_VDD_SPI_PWR_DRV : R/W ;bitpos:[1:0] ;default: 2'b0 ; */ /*description: */ #define RTC_CNTL_VDD_SPI_PWR_DRV 0x00000003 #define RTC_CNTL_VDD_SPI_PWR_DRV_M ((RTC_CNTL_VDD_SPI_PWR_DRV_V)<<(RTC_CNTL_VDD_SPI_PWR_DRV_S)) #define RTC_CNTL_VDD_SPI_PWR_DRV_V 0x3 #define RTC_CNTL_VDD_SPI_PWR_DRV_S 0 #define RTC_CNTL_DIG_ISO_REG (DR_REG_RTCCNTL_BASE + 0x008C) /* RTC_CNTL_DG_WRAP_FORCE_NOISO : R/W ;bitpos:[31] ;default: 1'd1 ; */ /*description: */ #define RTC_CNTL_DG_WRAP_FORCE_NOISO (BIT(31)) #define RTC_CNTL_DG_WRAP_FORCE_NOISO_M (BIT(31)) #define RTC_CNTL_DG_WRAP_FORCE_NOISO_V 0x1 #define RTC_CNTL_DG_WRAP_FORCE_NOISO_S 31 /* RTC_CNTL_DG_WRAP_FORCE_ISO : R/W ;bitpos:[30] ;default: 1'd0 ; */ /*description: digital core force ISO*/ #define RTC_CNTL_DG_WRAP_FORCE_ISO (BIT(30)) #define RTC_CNTL_DG_WRAP_FORCE_ISO_M (BIT(30)) #define RTC_CNTL_DG_WRAP_FORCE_ISO_V 0x1 #define RTC_CNTL_DG_WRAP_FORCE_ISO_S 30 /* RTC_CNTL_WIFI_FORCE_NOISO : R/W ;bitpos:[29] ;default: 1'd1 ; */ /*description: wifi force no ISO*/ #define RTC_CNTL_WIFI_FORCE_NOISO (BIT(29)) #define RTC_CNTL_WIFI_FORCE_NOISO_M (BIT(29)) #define RTC_CNTL_WIFI_FORCE_NOISO_V 0x1 #define RTC_CNTL_WIFI_FORCE_NOISO_S 29 /* RTC_CNTL_WIFI_FORCE_ISO : R/W ;bitpos:[28] ;default: 1'd0 ; */ /*description: wifi force ISO*/ #define RTC_CNTL_WIFI_FORCE_ISO (BIT(28)) #define RTC_CNTL_WIFI_FORCE_ISO_M (BIT(28)) #define RTC_CNTL_WIFI_FORCE_ISO_V 0x1 #define RTC_CNTL_WIFI_FORCE_ISO_S 28 /* RTC_CNTL_CPU_TOP_FORCE_NOISO : R/W ;bitpos:[27] ;default: 1'd1 ; */ /*description: cpu force no ISO*/ #define RTC_CNTL_CPU_TOP_FORCE_NOISO (BIT(27)) #define RTC_CNTL_CPU_TOP_FORCE_NOISO_M (BIT(27)) #define RTC_CNTL_CPU_TOP_FORCE_NOISO_V 0x1 #define RTC_CNTL_CPU_TOP_FORCE_NOISO_S 27 /* RTC_CNTL_CPU_TOP_FORCE_ISO : R/W ;bitpos:[26] ;default: 1'd0 ; */ /*description: cpu force ISO*/ #define RTC_CNTL_CPU_TOP_FORCE_ISO (BIT(26)) #define RTC_CNTL_CPU_TOP_FORCE_ISO_M (BIT(26)) #define RTC_CNTL_CPU_TOP_FORCE_ISO_V 0x1 #define RTC_CNTL_CPU_TOP_FORCE_ISO_S 26 /* RTC_CNTL_DG_PERI_FORCE_NOISO : R/W ;bitpos:[25] ;default: 1'd1 ; */ /*description: */ #define RTC_CNTL_DG_PERI_FORCE_NOISO (BIT(25)) #define RTC_CNTL_DG_PERI_FORCE_NOISO_M (BIT(25)) #define RTC_CNTL_DG_PERI_FORCE_NOISO_V 0x1 #define RTC_CNTL_DG_PERI_FORCE_NOISO_S 25 /* RTC_CNTL_DG_PERI_FORCE_ISO : R/W ;bitpos:[24] ;default: 1'd0 ; */ /*description: */ #define RTC_CNTL_DG_PERI_FORCE_ISO (BIT(24)) #define RTC_CNTL_DG_PERI_FORCE_ISO_M (BIT(24)) #define RTC_CNTL_DG_PERI_FORCE_ISO_V 0x1 #define RTC_CNTL_DG_PERI_FORCE_ISO_S 24 /* RTC_CNTL_BT_FORCE_NOISO : R/W ;bitpos:[23] ;default: 1'd1 ; */ /*description: */ #define RTC_CNTL_BT_FORCE_NOISO (BIT(23)) #define RTC_CNTL_BT_FORCE_NOISO_M (BIT(23)) #define RTC_CNTL_BT_FORCE_NOISO_V 0x1 #define RTC_CNTL_BT_FORCE_NOISO_S 23 /* RTC_CNTL_BT_FORCE_ISO : R/W ;bitpos:[22] ;default: 1'd0 ; */ /*description: */ #define RTC_CNTL_BT_FORCE_ISO (BIT(22)) #define RTC_CNTL_BT_FORCE_ISO_M (BIT(22)) #define RTC_CNTL_BT_FORCE_ISO_V 0x1 #define RTC_CNTL_BT_FORCE_ISO_S 22 /* RTC_CNTL_DG_PAD_FORCE_HOLD : R/W ;bitpos:[15] ;default: 1'd0 ; */ /*description: digital pad force hold*/ #define RTC_CNTL_DG_PAD_FORCE_HOLD (BIT(15)) #define RTC_CNTL_DG_PAD_FORCE_HOLD_M (BIT(15)) #define RTC_CNTL_DG_PAD_FORCE_HOLD_V 0x1 #define RTC_CNTL_DG_PAD_FORCE_HOLD_S 15 /* RTC_CNTL_DG_PAD_FORCE_UNHOLD : R/W ;bitpos:[14] ;default: 1'd1 ; */ /*description: digital pad force un-hold*/ #define RTC_CNTL_DG_PAD_FORCE_UNHOLD (BIT(14)) #define RTC_CNTL_DG_PAD_FORCE_UNHOLD_M (BIT(14)) #define RTC_CNTL_DG_PAD_FORCE_UNHOLD_V 0x1 #define RTC_CNTL_DG_PAD_FORCE_UNHOLD_S 14 /* RTC_CNTL_DG_PAD_FORCE_ISO : R/W ;bitpos:[13] ;default: 1'd0 ; */ /*description: digital pad force ISO*/ #define RTC_CNTL_DG_PAD_FORCE_ISO (BIT(13)) #define RTC_CNTL_DG_PAD_FORCE_ISO_M (BIT(13)) #define RTC_CNTL_DG_PAD_FORCE_ISO_V 0x1 #define RTC_CNTL_DG_PAD_FORCE_ISO_S 13 /* RTC_CNTL_DG_PAD_FORCE_NOISO : R/W ;bitpos:[12] ;default: 1'd1 ; */ /*description: digital pad force no ISO*/ #define RTC_CNTL_DG_PAD_FORCE_NOISO (BIT(12)) #define RTC_CNTL_DG_PAD_FORCE_NOISO_M (BIT(12)) #define RTC_CNTL_DG_PAD_FORCE_NOISO_V 0x1 #define RTC_CNTL_DG_PAD_FORCE_NOISO_S 12 /* RTC_CNTL_DG_PAD_AUTOHOLD_EN : R/W ;bitpos:[11] ;default: 1'd0 ; */ /*description: digital pad enable auto-hold*/ #define RTC_CNTL_DG_PAD_AUTOHOLD_EN (BIT(11)) #define RTC_CNTL_DG_PAD_AUTOHOLD_EN_M (BIT(11)) #define RTC_CNTL_DG_PAD_AUTOHOLD_EN_V 0x1 #define RTC_CNTL_DG_PAD_AUTOHOLD_EN_S 11 /* RTC_CNTL_CLR_DG_PAD_AUTOHOLD : WO ;bitpos:[10] ;default: 1'd0 ; */ /*description: wtite only register to clear digital pad auto-hold*/ #define RTC_CNTL_CLR_DG_PAD_AUTOHOLD (BIT(10)) #define RTC_CNTL_CLR_DG_PAD_AUTOHOLD_M (BIT(10)) #define RTC_CNTL_CLR_DG_PAD_AUTOHOLD_V 0x1 #define RTC_CNTL_CLR_DG_PAD_AUTOHOLD_S 10 /* RTC_CNTL_DG_PAD_AUTOHOLD : RO ;bitpos:[9] ;default: 1'd0 ; */ /*description: read only register to indicate digital pad auto-hold status*/ #define RTC_CNTL_DG_PAD_AUTOHOLD (BIT(9)) #define RTC_CNTL_DG_PAD_AUTOHOLD_M (BIT(9)) #define RTC_CNTL_DG_PAD_AUTOHOLD_V 0x1 #define RTC_CNTL_DG_PAD_AUTOHOLD_S 9 /* RTC_CNTL_DIG_ISO_FORCE_ON : R/W ;bitpos:[8] ;default: 1'd0 ; */ /*description: */ #define RTC_CNTL_DIG_ISO_FORCE_ON (BIT(8)) #define RTC_CNTL_DIG_ISO_FORCE_ON_M (BIT(8)) #define RTC_CNTL_DIG_ISO_FORCE_ON_V 0x1 #define RTC_CNTL_DIG_ISO_FORCE_ON_S 8 /* RTC_CNTL_DIG_ISO_FORCE_OFF : R/W ;bitpos:[7] ;default: 1'd1 ; */ /*description: */ #define RTC_CNTL_DIG_ISO_FORCE_OFF (BIT(7)) #define RTC_CNTL_DIG_ISO_FORCE_OFF_M (BIT(7)) #define RTC_CNTL_DIG_ISO_FORCE_OFF_V 0x1 #define RTC_CNTL_DIG_ISO_FORCE_OFF_S 7 #define RTC_CNTL_WDTCONFIG0_REG (DR_REG_RTCCNTL_BASE + 0x0090) /* RTC_CNTL_WDT_EN : R/W ;bitpos:[31] ;default: 1'h0 ; */ /*description: */ #define RTC_CNTL_WDT_EN (BIT(31)) #define RTC_CNTL_WDT_EN_M (BIT(31)) #define RTC_CNTL_WDT_EN_V 0x1 #define RTC_CNTL_WDT_EN_S 31 /* RTC_CNTL_WDT_STG0 : R/W ;bitpos:[30:28] ;default: 3'h0 ; */ /*description: 1: interrupt stage en*/ #define RTC_CNTL_WDT_STG0 0x00000007 #define RTC_CNTL_WDT_STG0_M ((RTC_CNTL_WDT_STG0_V)<<(RTC_CNTL_WDT_STG0_S)) #define RTC_CNTL_WDT_STG0_V 0x7 #define RTC_CNTL_WDT_STG0_S 28 /* RTC_CNTL_WDT_STG1 : R/W ;bitpos:[27:25] ;default: 3'h0 ; */ /*description: 1: interrupt stage en*/ #define RTC_CNTL_WDT_STG1 0x00000007 #define RTC_CNTL_WDT_STG1_M ((RTC_CNTL_WDT_STG1_V)<<(RTC_CNTL_WDT_STG1_S)) #define RTC_CNTL_WDT_STG1_V 0x7 #define RTC_CNTL_WDT_STG1_S 25 /* RTC_CNTL_WDT_STG2 : R/W ;bitpos:[24:22] ;default: 3'h0 ; */ /*description: 1: interrupt stage en*/ #define RTC_CNTL_WDT_STG2 0x00000007 #define RTC_CNTL_WDT_STG2_M ((RTC_CNTL_WDT_STG2_V)<<(RTC_CNTL_WDT_STG2_S)) #define RTC_CNTL_WDT_STG2_V 0x7 #define RTC_CNTL_WDT_STG2_S 22 /* RTC_CNTL_WDT_STG3 : R/W ;bitpos:[21:19] ;default: 3'h0 ; */ /*description: 1: interrupt stage en*/ #define RTC_CNTL_WDT_STG3 0x00000007 #define RTC_CNTL_WDT_STG3_M ((RTC_CNTL_WDT_STG3_V)<<(RTC_CNTL_WDT_STG3_S)) #define RTC_CNTL_WDT_STG3_V 0x7 #define RTC_CNTL_WDT_STG3_S 19 /* RTC_CNTL_WDT_STGX : */ /*description: stage action selection values */ #define RTC_WDT_STG_SEL_OFF 0 #define RTC_WDT_STG_SEL_INT 1 #define RTC_WDT_STG_SEL_RESET_CPU 2 #define RTC_WDT_STG_SEL_RESET_SYSTEM 3 #define RTC_WDT_STG_SEL_RESET_RTC 4 /* RTC_CNTL_WDT_CPU_RESET_LENGTH : R/W ;bitpos:[18:16] ;default: 3'h1 ; */ /*description: CPU reset counter length*/ #define RTC_CNTL_WDT_CPU_RESET_LENGTH 0x00000007 #define RTC_CNTL_WDT_CPU_RESET_LENGTH_M ((RTC_CNTL_WDT_CPU_RESET_LENGTH_V)<<(RTC_CNTL_WDT_CPU_RESET_LENGTH_S)) #define RTC_CNTL_WDT_CPU_RESET_LENGTH_V 0x7 #define RTC_CNTL_WDT_CPU_RESET_LENGTH_S 16 /* RTC_CNTL_WDT_SYS_RESET_LENGTH : R/W ;bitpos:[15:13] ;default: 3'h1 ; */ /*description: system reset counter length*/ #define RTC_CNTL_WDT_SYS_RESET_LENGTH 0x00000007 #define RTC_CNTL_WDT_SYS_RESET_LENGTH_M ((RTC_CNTL_WDT_SYS_RESET_LENGTH_V)<<(RTC_CNTL_WDT_SYS_RESET_LENGTH_S)) #define RTC_CNTL_WDT_SYS_RESET_LENGTH_V 0x7 #define RTC_CNTL_WDT_SYS_RESET_LENGTH_S 13 /* RTC_CNTL_WDT_FLASHBOOT_MOD_EN : R/W ;bitpos:[12] ;default: 1'h1 ; */ /*description: enable WDT in flash boot*/ #define RTC_CNTL_WDT_FLASHBOOT_MOD_EN (BIT(12)) #define RTC_CNTL_WDT_FLASHBOOT_MOD_EN_M (BIT(12)) #define RTC_CNTL_WDT_FLASHBOOT_MOD_EN_V 0x1 #define RTC_CNTL_WDT_FLASHBOOT_MOD_EN_S 12 /* RTC_CNTL_WDT_PROCPU_RESET_EN : R/W ;bitpos:[11] ;default: 1'd0 ; */ /*description: enable WDT reset PRO CPU*/ #define RTC_CNTL_WDT_PROCPU_RESET_EN (BIT(11)) #define RTC_CNTL_WDT_PROCPU_RESET_EN_M (BIT(11)) #define RTC_CNTL_WDT_PROCPU_RESET_EN_V 0x1 #define RTC_CNTL_WDT_PROCPU_RESET_EN_S 11 /* RTC_CNTL_WDT_APPCPU_RESET_EN : R/W ;bitpos:[10] ;default: 1'd0 ; */ /*description: enable WDT reset APP CPU*/ #define RTC_CNTL_WDT_APPCPU_RESET_EN (BIT(10)) #define RTC_CNTL_WDT_APPCPU_RESET_EN_M (BIT(10)) #define RTC_CNTL_WDT_APPCPU_RESET_EN_V 0x1 #define RTC_CNTL_WDT_APPCPU_RESET_EN_S 10 /* RTC_CNTL_WDT_PAUSE_IN_SLP : R/W ;bitpos:[9] ;default: 1'd1 ; */ /*description: pause WDT in sleep*/ #define RTC_CNTL_WDT_PAUSE_IN_SLP (BIT(9)) #define RTC_CNTL_WDT_PAUSE_IN_SLP_M (BIT(9)) #define RTC_CNTL_WDT_PAUSE_IN_SLP_V 0x1 #define RTC_CNTL_WDT_PAUSE_IN_SLP_S 9 /* RTC_CNTL_WDT_CHIP_RESET_EN : R/W ;bitpos:[8] ;default: 1'b0 ; */ /*description: wdt reset whole chip enable*/ #define RTC_CNTL_WDT_CHIP_RESET_EN (BIT(8)) #define RTC_CNTL_WDT_CHIP_RESET_EN_M (BIT(8)) #define RTC_CNTL_WDT_CHIP_RESET_EN_V 0x1 #define RTC_CNTL_WDT_CHIP_RESET_EN_S 8 /* RTC_CNTL_WDT_CHIP_RESET_WIDTH : R/W ;bitpos:[7:0] ;default: 8'd20 ; */ /*description: chip reset siginal pulse width*/ #define RTC_CNTL_WDT_CHIP_RESET_WIDTH 0x000000FF #define RTC_CNTL_WDT_CHIP_RESET_WIDTH_M ((RTC_CNTL_WDT_CHIP_RESET_WIDTH_V)<<(RTC_CNTL_WDT_CHIP_RESET_WIDTH_S)) #define RTC_CNTL_WDT_CHIP_RESET_WIDTH_V 0xFF #define RTC_CNTL_WDT_CHIP_RESET_WIDTH_S 0 #define RTC_CNTL_WDTCONFIG1_REG (DR_REG_RTCCNTL_BASE + 0x0094) /* RTC_CNTL_WDT_STG0_HOLD : R/W ;bitpos:[31:0] ;default: 32'd200000 ; */ /*description: */ #define RTC_CNTL_WDT_STG0_HOLD 0xFFFFFFFF #define RTC_CNTL_WDT_STG0_HOLD_M ((RTC_CNTL_WDT_STG0_HOLD_V)<<(RTC_CNTL_WDT_STG0_HOLD_S)) #define RTC_CNTL_WDT_STG0_HOLD_V 0xFFFFFFFF #define RTC_CNTL_WDT_STG0_HOLD_S 0 #define RTC_CNTL_WDTCONFIG2_REG (DR_REG_RTCCNTL_BASE + 0x0098) /* RTC_CNTL_WDT_STG1_HOLD : R/W ;bitpos:[31:0] ;default: 32'd80000 ; */ /*description: */ #define RTC_CNTL_WDT_STG1_HOLD 0xFFFFFFFF #define RTC_CNTL_WDT_STG1_HOLD_M ((RTC_CNTL_WDT_STG1_HOLD_V)<<(RTC_CNTL_WDT_STG1_HOLD_S)) #define RTC_CNTL_WDT_STG1_HOLD_V 0xFFFFFFFF #define RTC_CNTL_WDT_STG1_HOLD_S 0 #define RTC_CNTL_WDTCONFIG3_REG (DR_REG_RTCCNTL_BASE + 0x009C) /* RTC_CNTL_WDT_STG2_HOLD : R/W ;bitpos:[31:0] ;default: 32'hfff ; */ /*description: */ #define RTC_CNTL_WDT_STG2_HOLD 0xFFFFFFFF #define RTC_CNTL_WDT_STG2_HOLD_M ((RTC_CNTL_WDT_STG2_HOLD_V)<<(RTC_CNTL_WDT_STG2_HOLD_S)) #define RTC_CNTL_WDT_STG2_HOLD_V 0xFFFFFFFF #define RTC_CNTL_WDT_STG2_HOLD_S 0 #define RTC_CNTL_WDTCONFIG4_REG (DR_REG_RTCCNTL_BASE + 0x00A0) /* RTC_CNTL_WDT_STG3_HOLD : R/W ;bitpos:[31:0] ;default: 32'hfff ; */ /*description: */ #define RTC_CNTL_WDT_STG3_HOLD 0xFFFFFFFF #define RTC_CNTL_WDT_STG3_HOLD_M ((RTC_CNTL_WDT_STG3_HOLD_V)<<(RTC_CNTL_WDT_STG3_HOLD_S)) #define RTC_CNTL_WDT_STG3_HOLD_V 0xFFFFFFFF #define RTC_CNTL_WDT_STG3_HOLD_S 0 #define RTC_CNTL_WDTFEED_REG (DR_REG_RTCCNTL_BASE + 0x00A4) /* RTC_CNTL_WDT_FEED : WO ;bitpos:[31] ;default: 1'd0 ; */ /*description: */ #define RTC_CNTL_WDT_FEED (BIT(31)) #define RTC_CNTL_WDT_FEED_M (BIT(31)) #define RTC_CNTL_WDT_FEED_V 0x1 #define RTC_CNTL_WDT_FEED_S 31 #define RTC_CNTL_WDTWPROTECT_REG (DR_REG_RTCCNTL_BASE + 0x00A8) /* RTC_CNTL_WDT_WKEY : R/W ;bitpos:[31:0] ;default: 32'h50d83aa1 ; */ /*description: */ #define RTC_CNTL_WDT_WKEY 0xFFFFFFFF #define RTC_CNTL_WDT_WKEY_M ((RTC_CNTL_WDT_WKEY_V)<<(RTC_CNTL_WDT_WKEY_S)) #define RTC_CNTL_WDT_WKEY_V 0xFFFFFFFF #define RTC_CNTL_WDT_WKEY_S 0 #define RTC_CNTL_SWD_CONF_REG (DR_REG_RTCCNTL_BASE + 0x00AC) /* RTC_CNTL_SWD_AUTO_FEED_EN : R/W ;bitpos:[31] ;default: 1'b0 ; */ /*description: automatically feed swd when int comes*/ #define RTC_CNTL_SWD_AUTO_FEED_EN (BIT(31)) #define RTC_CNTL_SWD_AUTO_FEED_EN_M (BIT(31)) #define RTC_CNTL_SWD_AUTO_FEED_EN_V 0x1 #define RTC_CNTL_SWD_AUTO_FEED_EN_S 31 /* RTC_CNTL_SWD_DISABLE : R/W ;bitpos:[30] ;default: 1'b0 ; */ /*description: disabel SWD*/ #define RTC_CNTL_SWD_DISABLE (BIT(30)) #define RTC_CNTL_SWD_DISABLE_M (BIT(30)) #define RTC_CNTL_SWD_DISABLE_V 0x1 #define RTC_CNTL_SWD_DISABLE_S 30 /* RTC_CNTL_SWD_FEED : WO ;bitpos:[29] ;default: 1'b0 ; */ /*description: Sw feed swd*/ #define RTC_CNTL_SWD_FEED (BIT(29)) #define RTC_CNTL_SWD_FEED_M (BIT(29)) #define RTC_CNTL_SWD_FEED_V 0x1 #define RTC_CNTL_SWD_FEED_S 29 /* RTC_CNTL_SWD_RST_FLAG_CLR : WO ;bitpos:[28] ;default: 1'b0 ; */ /*description: reset swd reset flag*/ #define RTC_CNTL_SWD_RST_FLAG_CLR (BIT(28)) #define RTC_CNTL_SWD_RST_FLAG_CLR_M (BIT(28)) #define RTC_CNTL_SWD_RST_FLAG_CLR_V 0x1 #define RTC_CNTL_SWD_RST_FLAG_CLR_S 28 /* RTC_CNTL_SWD_SIGNAL_WIDTH : R/W ;bitpos:[27:18] ;default: 10'd300 ; */ /*description: adjust signal width send to swd*/ #define RTC_CNTL_SWD_SIGNAL_WIDTH 0x000003FF #define RTC_CNTL_SWD_SIGNAL_WIDTH_M ((RTC_CNTL_SWD_SIGNAL_WIDTH_V)<<(RTC_CNTL_SWD_SIGNAL_WIDTH_S)) #define RTC_CNTL_SWD_SIGNAL_WIDTH_V 0x3FF #define RTC_CNTL_SWD_SIGNAL_WIDTH_S 18 /* RTC_CNTL_SWD_BYPASS_RST : R/W ;bitpos:[17] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_SWD_BYPASS_RST (BIT(17)) #define RTC_CNTL_SWD_BYPASS_RST_M (BIT(17)) #define RTC_CNTL_SWD_BYPASS_RST_V 0x1 #define RTC_CNTL_SWD_BYPASS_RST_S 17 /* RTC_CNTL_SWD_FEED_INT : RO ;bitpos:[1] ;default: 1'b0 ; */ /*description: swd interrupt for feeding*/ #define RTC_CNTL_SWD_FEED_INT (BIT(1)) #define RTC_CNTL_SWD_FEED_INT_M (BIT(1)) #define RTC_CNTL_SWD_FEED_INT_V 0x1 #define RTC_CNTL_SWD_FEED_INT_S 1 /* RTC_CNTL_SWD_RESET_FLAG : RO ;bitpos:[0] ;default: 1'b0 ; */ /*description: swd reset flag*/ #define RTC_CNTL_SWD_RESET_FLAG (BIT(0)) #define RTC_CNTL_SWD_RESET_FLAG_M (BIT(0)) #define RTC_CNTL_SWD_RESET_FLAG_V 0x1 #define RTC_CNTL_SWD_RESET_FLAG_S 0 #define RTC_CNTL_SWD_WPROTECT_REG (DR_REG_RTCCNTL_BASE + 0x00B0) /* RTC_CNTL_SWD_WKEY : R/W ;bitpos:[31:0] ;default: 32'h8f1d312a ; */ /*description: */ #define RTC_CNTL_SWD_WKEY 0xFFFFFFFF #define RTC_CNTL_SWD_WKEY_M ((RTC_CNTL_SWD_WKEY_V)<<(RTC_CNTL_SWD_WKEY_S)) #define RTC_CNTL_SWD_WKEY_V 0xFFFFFFFF #define RTC_CNTL_SWD_WKEY_S 0 #define RTC_CNTL_SW_CPU_STALL_REG (DR_REG_RTCCNTL_BASE + 0x00B4) /* RTC_CNTL_SW_STALL_PROCPU_C1 : R/W ;bitpos:[31:26] ;default: 6'b0 ; */ /*description: */ #define RTC_CNTL_SW_STALL_PROCPU_C1 0x0000003F #define RTC_CNTL_SW_STALL_PROCPU_C1_M ((RTC_CNTL_SW_STALL_PROCPU_C1_V)<<(RTC_CNTL_SW_STALL_PROCPU_C1_S)) #define RTC_CNTL_SW_STALL_PROCPU_C1_V 0x3F #define RTC_CNTL_SW_STALL_PROCPU_C1_S 26 /* RTC_CNTL_SW_STALL_APPCPU_C1 : R/W ;bitpos:[25:20] ;default: 6'b0 ; */ /*description: {reg_sw_stall_appcpu_c1[5:0]*/ #define RTC_CNTL_SW_STALL_APPCPU_C1 0x0000003F #define RTC_CNTL_SW_STALL_APPCPU_C1_M ((RTC_CNTL_SW_STALL_APPCPU_C1_V)<<(RTC_CNTL_SW_STALL_APPCPU_C1_S)) #define RTC_CNTL_SW_STALL_APPCPU_C1_V 0x3F #define RTC_CNTL_SW_STALL_APPCPU_C1_S 20 #define RTC_CNTL_STORE4_REG (DR_REG_RTCCNTL_BASE + 0x00B8) /* RTC_CNTL_SCRATCH4 : R/W ;bitpos:[31:0] ;default: 0 ; */ /*description: */ #define RTC_CNTL_SCRATCH4 0xFFFFFFFF #define RTC_CNTL_SCRATCH4_M ((RTC_CNTL_SCRATCH4_V)<<(RTC_CNTL_SCRATCH4_S)) #define RTC_CNTL_SCRATCH4_V 0xFFFFFFFF #define RTC_CNTL_SCRATCH4_S 0 #define RTC_CNTL_STORE5_REG (DR_REG_RTCCNTL_BASE + 0x00BC) /* RTC_CNTL_SCRATCH5 : R/W ;bitpos:[31:0] ;default: 0 ; */ /*description: */ #define RTC_CNTL_SCRATCH5 0xFFFFFFFF #define RTC_CNTL_SCRATCH5_M ((RTC_CNTL_SCRATCH5_V)<<(RTC_CNTL_SCRATCH5_S)) #define RTC_CNTL_SCRATCH5_V 0xFFFFFFFF #define RTC_CNTL_SCRATCH5_S 0 #define RTC_CNTL_STORE6_REG (DR_REG_RTCCNTL_BASE + 0x00C0) /* RTC_CNTL_SCRATCH6 : R/W ;bitpos:[31:0] ;default: 0 ; */ /*description: */ #define RTC_CNTL_SCRATCH6 0xFFFFFFFF #define RTC_CNTL_SCRATCH6_M ((RTC_CNTL_SCRATCH6_V)<<(RTC_CNTL_SCRATCH6_S)) #define RTC_CNTL_SCRATCH6_V 0xFFFFFFFF #define RTC_CNTL_SCRATCH6_S 0 #define RTC_CNTL_STORE7_REG (DR_REG_RTCCNTL_BASE + 0x00C4) /* RTC_CNTL_SCRATCH7 : R/W ;bitpos:[31:0] ;default: 0 ; */ /*description: */ #define RTC_CNTL_SCRATCH7 0xFFFFFFFF #define RTC_CNTL_SCRATCH7_M ((RTC_CNTL_SCRATCH7_V)<<(RTC_CNTL_SCRATCH7_S)) #define RTC_CNTL_SCRATCH7_V 0xFFFFFFFF #define RTC_CNTL_SCRATCH7_S 0 #define RTC_CNTL_LOW_POWER_ST_REG (DR_REG_RTCCNTL_BASE + 0x00C8) /* RTC_CNTL_MAIN_STATE : RO ;bitpos:[31:28] ;default: 4'd0 ; */ /*description: rtc main state machine status*/ #define RTC_CNTL_MAIN_STATE 0x0000000F #define RTC_CNTL_MAIN_STATE_M ((RTC_CNTL_MAIN_STATE_V)<<(RTC_CNTL_MAIN_STATE_S)) #define RTC_CNTL_MAIN_STATE_V 0xF #define RTC_CNTL_MAIN_STATE_S 28 /* RTC_CNTL_MAIN_STATE_IN_IDLE : RO ;bitpos:[27] ;default: 1'b0 ; */ /*description: rtc main state machine is in idle state*/ #define RTC_CNTL_MAIN_STATE_IN_IDLE (BIT(27)) #define RTC_CNTL_MAIN_STATE_IN_IDLE_M (BIT(27)) #define RTC_CNTL_MAIN_STATE_IN_IDLE_V 0x1 #define RTC_CNTL_MAIN_STATE_IN_IDLE_S 27 /* RTC_CNTL_MAIN_STATE_IN_SLP : RO ;bitpos:[26] ;default: 1'b0 ; */ /*description: rtc main state machine is in sleep state*/ #define RTC_CNTL_MAIN_STATE_IN_SLP (BIT(26)) #define RTC_CNTL_MAIN_STATE_IN_SLP_M (BIT(26)) #define RTC_CNTL_MAIN_STATE_IN_SLP_V 0x1 #define RTC_CNTL_MAIN_STATE_IN_SLP_S 26 /* RTC_CNTL_MAIN_STATE_IN_WAIT_XTL : RO ;bitpos:[25] ;default: 1'b0 ; */ /*description: rtc main state machine is in wait xtal state*/ #define RTC_CNTL_MAIN_STATE_IN_WAIT_XTL (BIT(25)) #define RTC_CNTL_MAIN_STATE_IN_WAIT_XTL_M (BIT(25)) #define RTC_CNTL_MAIN_STATE_IN_WAIT_XTL_V 0x1 #define RTC_CNTL_MAIN_STATE_IN_WAIT_XTL_S 25 /* RTC_CNTL_MAIN_STATE_IN_WAIT_PLL : RO ;bitpos:[24] ;default: 1'b0 ; */ /*description: rtc main state machine is in wait pll state*/ #define RTC_CNTL_MAIN_STATE_IN_WAIT_PLL (BIT(24)) #define RTC_CNTL_MAIN_STATE_IN_WAIT_PLL_M (BIT(24)) #define RTC_CNTL_MAIN_STATE_IN_WAIT_PLL_V 0x1 #define RTC_CNTL_MAIN_STATE_IN_WAIT_PLL_S 24 /* RTC_CNTL_MAIN_STATE_IN_WAIT_8M : RO ;bitpos:[23] ;default: 1'b0 ; */ /*description: rtc main state machine is in wait 8m state*/ #define RTC_CNTL_MAIN_STATE_IN_WAIT_8M (BIT(23)) #define RTC_CNTL_MAIN_STATE_IN_WAIT_8M_M (BIT(23)) #define RTC_CNTL_MAIN_STATE_IN_WAIT_8M_V 0x1 #define RTC_CNTL_MAIN_STATE_IN_WAIT_8M_S 23 /* RTC_CNTL_IN_LOW_POWER_STATE : RO ;bitpos:[22] ;default: 1'b0 ; */ /*description: rtc main state machine is in the states of low power*/ #define RTC_CNTL_IN_LOW_POWER_STATE (BIT(22)) #define RTC_CNTL_IN_LOW_POWER_STATE_M (BIT(22)) #define RTC_CNTL_IN_LOW_POWER_STATE_V 0x1 #define RTC_CNTL_IN_LOW_POWER_STATE_S 22 /* RTC_CNTL_IN_WAKEUP_STATE : RO ;bitpos:[21] ;default: 1'b0 ; */ /*description: rtc main state machine is in the states of wakeup process*/ #define RTC_CNTL_IN_WAKEUP_STATE (BIT(21)) #define RTC_CNTL_IN_WAKEUP_STATE_M (BIT(21)) #define RTC_CNTL_IN_WAKEUP_STATE_V 0x1 #define RTC_CNTL_IN_WAKEUP_STATE_S 21 /* RTC_CNTL_MAIN_STATE_WAIT_END : RO ;bitpos:[20] ;default: 1'b0 ; */ /*description: rtc main state machine has been waited for some cycles*/ #define RTC_CNTL_MAIN_STATE_WAIT_END (BIT(20)) #define RTC_CNTL_MAIN_STATE_WAIT_END_M (BIT(20)) #define RTC_CNTL_MAIN_STATE_WAIT_END_V 0x1 #define RTC_CNTL_MAIN_STATE_WAIT_END_S 20 /* RTC_CNTL_RDY_FOR_WAKEUP : RO ;bitpos:[19] ;default: 1'b0 ; */ /*description: rtc is ready to receive wake up trigger from wake up source*/ #define RTC_CNTL_RDY_FOR_WAKEUP (BIT(19)) #define RTC_CNTL_RDY_FOR_WAKEUP_M (BIT(19)) #define RTC_CNTL_RDY_FOR_WAKEUP_V 0x1 #define RTC_CNTL_RDY_FOR_WAKEUP_S 19 /* RTC_CNTL_MAIN_STATE_PLL_ON : RO ;bitpos:[18] ;default: 1'b0 ; */ /*description: rtc main state machine is in states that pll should be running*/ #define RTC_CNTL_MAIN_STATE_PLL_ON (BIT(18)) #define RTC_CNTL_MAIN_STATE_PLL_ON_M (BIT(18)) #define RTC_CNTL_MAIN_STATE_PLL_ON_V 0x1 #define RTC_CNTL_MAIN_STATE_PLL_ON_S 18 /* RTC_CNTL_MAIN_STATE_XTAL_ISO : RO ;bitpos:[17] ;default: 1'b0 ; */ /*description: no use any more*/ #define RTC_CNTL_MAIN_STATE_XTAL_ISO (BIT(17)) #define RTC_CNTL_MAIN_STATE_XTAL_ISO_M (BIT(17)) #define RTC_CNTL_MAIN_STATE_XTAL_ISO_V 0x1 #define RTC_CNTL_MAIN_STATE_XTAL_ISO_S 17 /* RTC_CNTL_COCPU_STATE_DONE : RO ;bitpos:[16] ;default: 1'b0 ; */ /*description: ulp/cocpu is done*/ #define RTC_CNTL_COCPU_STATE_DONE (BIT(16)) #define RTC_CNTL_COCPU_STATE_DONE_M (BIT(16)) #define RTC_CNTL_COCPU_STATE_DONE_V 0x1 #define RTC_CNTL_COCPU_STATE_DONE_S 16 /* RTC_CNTL_COCPU_STATE_SLP : RO ;bitpos:[15] ;default: 1'b0 ; */ /*description: ulp/cocpu is in sleep state*/ #define RTC_CNTL_COCPU_STATE_SLP (BIT(15)) #define RTC_CNTL_COCPU_STATE_SLP_M (BIT(15)) #define RTC_CNTL_COCPU_STATE_SLP_V 0x1 #define RTC_CNTL_COCPU_STATE_SLP_S 15 /* RTC_CNTL_COCPU_STATE_SWITCH : RO ;bitpos:[14] ;default: 1'b0 ; */ /*description: ulp/cocpu is about to working. Switch rtc main state*/ #define RTC_CNTL_COCPU_STATE_SWITCH (BIT(14)) #define RTC_CNTL_COCPU_STATE_SWITCH_M (BIT(14)) #define RTC_CNTL_COCPU_STATE_SWITCH_V 0x1 #define RTC_CNTL_COCPU_STATE_SWITCH_S 14 /* RTC_CNTL_COCPU_STATE_START : RO ;bitpos:[13] ;default: 1'b0 ; */ /*description: ulp/cocpu should start to work*/ #define RTC_CNTL_COCPU_STATE_START (BIT(13)) #define RTC_CNTL_COCPU_STATE_START_M (BIT(13)) #define RTC_CNTL_COCPU_STATE_START_V 0x1 #define RTC_CNTL_COCPU_STATE_START_S 13 /* RTC_CNTL_TOUCH_STATE_DONE : RO ;bitpos:[12] ;default: 1'b0 ; */ /*description: touch is done*/ #define RTC_CNTL_TOUCH_STATE_DONE (BIT(12)) #define RTC_CNTL_TOUCH_STATE_DONE_M (BIT(12)) #define RTC_CNTL_TOUCH_STATE_DONE_V 0x1 #define RTC_CNTL_TOUCH_STATE_DONE_S 12 /* RTC_CNTL_TOUCH_STATE_SLP : RO ;bitpos:[11] ;default: 1'b0 ; */ /*description: touch is in sleep state*/ #define RTC_CNTL_TOUCH_STATE_SLP (BIT(11)) #define RTC_CNTL_TOUCH_STATE_SLP_M (BIT(11)) #define RTC_CNTL_TOUCH_STATE_SLP_V 0x1 #define RTC_CNTL_TOUCH_STATE_SLP_S 11 /* RTC_CNTL_TOUCH_STATE_SWITCH : RO ;bitpos:[10] ;default: 1'b0 ; */ /*description: touch is about to working. Switch rtc main state*/ #define RTC_CNTL_TOUCH_STATE_SWITCH (BIT(10)) #define RTC_CNTL_TOUCH_STATE_SWITCH_M (BIT(10)) #define RTC_CNTL_TOUCH_STATE_SWITCH_V 0x1 #define RTC_CNTL_TOUCH_STATE_SWITCH_S 10 /* RTC_CNTL_TOUCH_STATE_START : RO ;bitpos:[9] ;default: 1'b0 ; */ /*description: touch should start to work*/ #define RTC_CNTL_TOUCH_STATE_START (BIT(9)) #define RTC_CNTL_TOUCH_STATE_START_M (BIT(9)) #define RTC_CNTL_TOUCH_STATE_START_V 0x1 #define RTC_CNTL_TOUCH_STATE_START_S 9 /* RTC_CNTL_XPD_DIG : RO ;bitpos:[8] ;default: 1'b0 ; */ /*description: digital wrap power down*/ #define RTC_CNTL_XPD_DIG (BIT(8)) #define RTC_CNTL_XPD_DIG_M (BIT(8)) #define RTC_CNTL_XPD_DIG_V 0x1 #define RTC_CNTL_XPD_DIG_S 8 /* RTC_CNTL_DIG_ISO : RO ;bitpos:[7] ;default: 1'b0 ; */ /*description: digital wrap iso*/ #define RTC_CNTL_DIG_ISO (BIT(7)) #define RTC_CNTL_DIG_ISO_M (BIT(7)) #define RTC_CNTL_DIG_ISO_V 0x1 #define RTC_CNTL_DIG_ISO_S 7 /* RTC_CNTL_XPD_WIFI : RO ;bitpos:[6] ;default: 1'b0 ; */ /*description: wifi wrap power down*/ #define RTC_CNTL_XPD_WIFI (BIT(6)) #define RTC_CNTL_XPD_WIFI_M (BIT(6)) #define RTC_CNTL_XPD_WIFI_V 0x1 #define RTC_CNTL_XPD_WIFI_S 6 /* RTC_CNTL_WIFI_ISO : RO ;bitpos:[5] ;default: 1'b0 ; */ /*description: wifi iso*/ #define RTC_CNTL_WIFI_ISO (BIT(5)) #define RTC_CNTL_WIFI_ISO_M (BIT(5)) #define RTC_CNTL_WIFI_ISO_V 0x1 #define RTC_CNTL_WIFI_ISO_S 5 /* RTC_CNTL_XPD_RTC_PERI : RO ;bitpos:[4] ;default: 1'b0 ; */ /*description: rtc peripheral power down*/ #define RTC_CNTL_XPD_RTC_PERI (BIT(4)) #define RTC_CNTL_XPD_RTC_PERI_M (BIT(4)) #define RTC_CNTL_XPD_RTC_PERI_V 0x1 #define RTC_CNTL_XPD_RTC_PERI_S 4 /* RTC_CNTL_PERI_ISO : RO ;bitpos:[3] ;default: 1'b0 ; */ /*description: rtc peripheral iso*/ #define RTC_CNTL_PERI_ISO (BIT(3)) #define RTC_CNTL_PERI_ISO_M (BIT(3)) #define RTC_CNTL_PERI_ISO_V 0x1 #define RTC_CNTL_PERI_ISO_S 3 /* RTC_CNTL_XPD_DIG_DCDC : RO ;bitpos:[2] ;default: 1'b0 ; */ /*description: External DCDC power down*/ #define RTC_CNTL_XPD_DIG_DCDC (BIT(2)) #define RTC_CNTL_XPD_DIG_DCDC_M (BIT(2)) #define RTC_CNTL_XPD_DIG_DCDC_V 0x1 #define RTC_CNTL_XPD_DIG_DCDC_S 2 /* RTC_CNTL_XPD_ROM0 : RO ;bitpos:[0] ;default: 1'b0 ; */ /*description: rom0 power down*/ #define RTC_CNTL_XPD_ROM0 (BIT(0)) #define RTC_CNTL_XPD_ROM0_M (BIT(0)) #define RTC_CNTL_XPD_ROM0_V 0x1 #define RTC_CNTL_XPD_ROM0_S 0 #define RTC_CNTL_DIAG0_REG (DR_REG_RTCCNTL_BASE + 0x00CC) /* RTC_CNTL_LOW_POWER_DIAG1 : RO ;bitpos:[31:0] ;default: 0 ; */ /*description: */ #define RTC_CNTL_LOW_POWER_DIAG1 0xFFFFFFFF #define RTC_CNTL_LOW_POWER_DIAG1_M ((RTC_CNTL_LOW_POWER_DIAG1_V)<<(RTC_CNTL_LOW_POWER_DIAG1_S)) #define RTC_CNTL_LOW_POWER_DIAG1_V 0xFFFFFFFF #define RTC_CNTL_LOW_POWER_DIAG1_S 0 #define RTC_CNTL_PAD_HOLD_REG (DR_REG_RTCCNTL_BASE + 0x00D0) /* RTC_CNTL_GPIO_PIN5_HOLD : R/W ;bitpos:[5] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN5_HOLD (BIT(5)) #define RTC_CNTL_GPIO_PIN5_HOLD_M (BIT(5)) #define RTC_CNTL_GPIO_PIN5_HOLD_V 0x1 #define RTC_CNTL_GPIO_PIN5_HOLD_S 5 /* RTC_CNTL_GPIO_PIN4_HOLD : R/W ;bitpos:[4] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN4_HOLD (BIT(4)) #define RTC_CNTL_GPIO_PIN4_HOLD_M (BIT(4)) #define RTC_CNTL_GPIO_PIN4_HOLD_V 0x1 #define RTC_CNTL_GPIO_PIN4_HOLD_S 4 /* RTC_CNTL_GPIO_PIN3_HOLD : R/W ;bitpos:[3] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN3_HOLD (BIT(3)) #define RTC_CNTL_GPIO_PIN3_HOLD_M (BIT(3)) #define RTC_CNTL_GPIO_PIN3_HOLD_V 0x1 #define RTC_CNTL_GPIO_PIN3_HOLD_S 3 /* RTC_CNTL_GPIO_PIN2_HOLD : R/W ;bitpos:[2] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN2_HOLD (BIT(2)) #define RTC_CNTL_GPIO_PIN2_HOLD_M (BIT(2)) #define RTC_CNTL_GPIO_PIN2_HOLD_V 0x1 #define RTC_CNTL_GPIO_PIN2_HOLD_S 2 /* RTC_CNTL_GPIO_PIN1_HOLD : R/W ;bitpos:[1] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN1_HOLD (BIT(1)) #define RTC_CNTL_GPIO_PIN1_HOLD_M (BIT(1)) #define RTC_CNTL_GPIO_PIN1_HOLD_V 0x1 #define RTC_CNTL_GPIO_PIN1_HOLD_S 1 /* RTC_CNTL_GPIO_PIN0_HOLD : R/W ;bitpos:[0] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN0_HOLD (BIT(0)) #define RTC_CNTL_GPIO_PIN0_HOLD_M (BIT(0)) #define RTC_CNTL_GPIO_PIN0_HOLD_V 0x1 #define RTC_CNTL_GPIO_PIN0_HOLD_S 0 #define RTC_CNTL_DIG_PAD_HOLD_REG (DR_REG_RTCCNTL_BASE + 0x00D4) /* RTC_CNTL_DIG_PAD_HOLD : R/W ;bitpos:[31:0] ;default: 32'b0 ; */ /*description: */ #define RTC_CNTL_DIG_PAD_HOLD 0xFFFFFFFF #define RTC_CNTL_DIG_PAD_HOLD_M ((RTC_CNTL_DIG_PAD_HOLD_V)<<(RTC_CNTL_DIG_PAD_HOLD_S)) #define RTC_CNTL_DIG_PAD_HOLD_V 0xFFFFFFFF #define RTC_CNTL_DIG_PAD_HOLD_S 0 #define RTC_CNTL_BROWN_OUT_REG (DR_REG_RTCCNTL_BASE + 0x00D8) /* RTC_CNTL_BROWN_OUT_DET : RO ;bitpos:[31] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BROWN_OUT_DET (BIT(31)) #define RTC_CNTL_BROWN_OUT_DET_M (BIT(31)) #define RTC_CNTL_BROWN_OUT_DET_V 0x1 #define RTC_CNTL_BROWN_OUT_DET_S 31 /* RTC_CNTL_BROWN_OUT_ENA : R/W ;bitpos:[30] ;default: 1'b1 ; */ /*description: enable brown out*/ #define RTC_CNTL_BROWN_OUT_ENA (BIT(30)) #define RTC_CNTL_BROWN_OUT_ENA_M (BIT(30)) #define RTC_CNTL_BROWN_OUT_ENA_V 0x1 #define RTC_CNTL_BROWN_OUT_ENA_S 30 /* RTC_CNTL_BROWN_OUT_CNT_CLR : WO ;bitpos:[29] ;default: 1'b0 ; */ /*description: clear brown out counter*/ #define RTC_CNTL_BROWN_OUT_CNT_CLR (BIT(29)) #define RTC_CNTL_BROWN_OUT_CNT_CLR_M (BIT(29)) #define RTC_CNTL_BROWN_OUT_CNT_CLR_V 0x1 #define RTC_CNTL_BROWN_OUT_CNT_CLR_S 29 /* RTC_CNTL_BROWN_OUT_ANA_RST_EN : R/W ;bitpos:[28] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BROWN_OUT_ANA_RST_EN (BIT(28)) #define RTC_CNTL_BROWN_OUT_ANA_RST_EN_M (BIT(28)) #define RTC_CNTL_BROWN_OUT_ANA_RST_EN_V 0x1 #define RTC_CNTL_BROWN_OUT_ANA_RST_EN_S 28 /* RTC_CNTL_BROWN_OUT_RST_SEL : R/W ;bitpos:[27] ;default: 1'b0 ; */ /*description: 1: 4-pos reset*/ #define RTC_CNTL_BROWN_OUT_RST_SEL (BIT(27)) #define RTC_CNTL_BROWN_OUT_RST_SEL_M (BIT(27)) #define RTC_CNTL_BROWN_OUT_RST_SEL_V 0x1 #define RTC_CNTL_BROWN_OUT_RST_SEL_S 27 /* RTC_CNTL_BROWN_OUT_RST_ENA : R/W ;bitpos:[26] ;default: 1'b0 ; */ /*description: enable brown out reset*/ #define RTC_CNTL_BROWN_OUT_RST_ENA (BIT(26)) #define RTC_CNTL_BROWN_OUT_RST_ENA_M (BIT(26)) #define RTC_CNTL_BROWN_OUT_RST_ENA_V 0x1 #define RTC_CNTL_BROWN_OUT_RST_ENA_S 26 /* RTC_CNTL_BROWN_OUT_RST_WAIT : R/W ;bitpos:[25:16] ;default: 10'h3ff ; */ /*description: brown out reset wait cycles*/ #define RTC_CNTL_BROWN_OUT_RST_WAIT 0x000003FF #define RTC_CNTL_BROWN_OUT_RST_WAIT_M ((RTC_CNTL_BROWN_OUT_RST_WAIT_V)<<(RTC_CNTL_BROWN_OUT_RST_WAIT_S)) #define RTC_CNTL_BROWN_OUT_RST_WAIT_V 0x3FF #define RTC_CNTL_BROWN_OUT_RST_WAIT_S 16 /* RTC_CNTL_BROWN_OUT_PD_RF_ENA : R/W ;bitpos:[15] ;default: 1'b0 ; */ /*description: enable power down RF when brown out happens*/ #define RTC_CNTL_BROWN_OUT_PD_RF_ENA (BIT(15)) #define RTC_CNTL_BROWN_OUT_PD_RF_ENA_M (BIT(15)) #define RTC_CNTL_BROWN_OUT_PD_RF_ENA_V 0x1 #define RTC_CNTL_BROWN_OUT_PD_RF_ENA_S 15 /* RTC_CNTL_BROWN_OUT_CLOSE_FLASH_ENA : R/W ;bitpos:[14] ;default: 1'b0 ; */ /*description: enable close flash when brown out happens*/ #define RTC_CNTL_BROWN_OUT_CLOSE_FLASH_ENA (BIT(14)) #define RTC_CNTL_BROWN_OUT_CLOSE_FLASH_ENA_M (BIT(14)) #define RTC_CNTL_BROWN_OUT_CLOSE_FLASH_ENA_V 0x1 #define RTC_CNTL_BROWN_OUT_CLOSE_FLASH_ENA_S 14 /* RTC_CNTL_BROWN_OUT_INT_WAIT : R/W ;bitpos:[13:4] ;default: 10'h1 ; */ /*description: brown out interrupt wait cycles*/ #define RTC_CNTL_BROWN_OUT_INT_WAIT 0x000003FF #define RTC_CNTL_BROWN_OUT_INT_WAIT_M ((RTC_CNTL_BROWN_OUT_INT_WAIT_V)<<(RTC_CNTL_BROWN_OUT_INT_WAIT_S)) #define RTC_CNTL_BROWN_OUT_INT_WAIT_V 0x3FF #define RTC_CNTL_BROWN_OUT_INT_WAIT_S 4 #define RTC_CNTL_TIME_LOW1_REG (DR_REG_RTCCNTL_BASE + 0x00DC) /* RTC_CNTL_TIMER_VALUE1_LOW : RO ;bitpos:[31:0] ;default: 32'h0 ; */ /*description: RTC timer low 32 bits*/ #define RTC_CNTL_TIMER_VALUE1_LOW 0xFFFFFFFF #define RTC_CNTL_TIMER_VALUE1_LOW_M ((RTC_CNTL_TIMER_VALUE1_LOW_V)<<(RTC_CNTL_TIMER_VALUE1_LOW_S)) #define RTC_CNTL_TIMER_VALUE1_LOW_V 0xFFFFFFFF #define RTC_CNTL_TIMER_VALUE1_LOW_S 0 #define RTC_CNTL_TIME_HIGH1_REG (DR_REG_RTCCNTL_BASE + 0x00E0) /* RTC_CNTL_TIMER_VALUE1_HIGH : RO ;bitpos:[15:0] ;default: 16'h0 ; */ /*description: RTC timer high 16 bits*/ #define RTC_CNTL_TIMER_VALUE1_HIGH 0x0000FFFF #define RTC_CNTL_TIMER_VALUE1_HIGH_M ((RTC_CNTL_TIMER_VALUE1_HIGH_V)<<(RTC_CNTL_TIMER_VALUE1_HIGH_S)) #define RTC_CNTL_TIMER_VALUE1_HIGH_V 0xFFFF #define RTC_CNTL_TIMER_VALUE1_HIGH_S 0 #define RTC_CNTL_XTAL32K_CLK_FACTOR_REG (DR_REG_RTCCNTL_BASE + 0x00E4) /* RTC_CNTL_XTAL32K_CLK_FACTOR : R/W ;bitpos:[31:0] ;default: 32'h0 ; */ /*description: xtal 32k watch dog backup clock factor*/ #define RTC_CNTL_XTAL32K_CLK_FACTOR 0xFFFFFFFF #define RTC_CNTL_XTAL32K_CLK_FACTOR_M ((RTC_CNTL_XTAL32K_CLK_FACTOR_V)<<(RTC_CNTL_XTAL32K_CLK_FACTOR_S)) #define RTC_CNTL_XTAL32K_CLK_FACTOR_V 0xFFFFFFFF #define RTC_CNTL_XTAL32K_CLK_FACTOR_S 0 #define RTC_CNTL_XTAL32K_CONF_REG (DR_REG_RTCCNTL_BASE + 0x00E8) /* RTC_CNTL_XTAL32K_STABLE_THRES : R/W ;bitpos:[31:28] ;default: 4'h0 ; */ /*description: if restarted xtal32k period is smaller than this*/ #define RTC_CNTL_XTAL32K_STABLE_THRES 0x0000000F #define RTC_CNTL_XTAL32K_STABLE_THRES_M ((RTC_CNTL_XTAL32K_STABLE_THRES_V)<<(RTC_CNTL_XTAL32K_STABLE_THRES_S)) #define RTC_CNTL_XTAL32K_STABLE_THRES_V 0xF #define RTC_CNTL_XTAL32K_STABLE_THRES_S 28 /* RTC_CNTL_XTAL32K_WDT_TIMEOUT : R/W ;bitpos:[27:20] ;default: 8'hff ; */ /*description: If no clock detected for this amount of time*/ #define RTC_CNTL_XTAL32K_WDT_TIMEOUT 0x000000FF #define RTC_CNTL_XTAL32K_WDT_TIMEOUT_M ((RTC_CNTL_XTAL32K_WDT_TIMEOUT_V)<<(RTC_CNTL_XTAL32K_WDT_TIMEOUT_S)) #define RTC_CNTL_XTAL32K_WDT_TIMEOUT_V 0xFF #define RTC_CNTL_XTAL32K_WDT_TIMEOUT_S 20 /* RTC_CNTL_XTAL32K_RESTART_WAIT : R/W ;bitpos:[19:4] ;default: 16'h0 ; */ /*description: cycles to wait to repower on xtal 32k*/ #define RTC_CNTL_XTAL32K_RESTART_WAIT 0x0000FFFF #define RTC_CNTL_XTAL32K_RESTART_WAIT_M ((RTC_CNTL_XTAL32K_RESTART_WAIT_V)<<(RTC_CNTL_XTAL32K_RESTART_WAIT_S)) #define RTC_CNTL_XTAL32K_RESTART_WAIT_V 0xFFFF #define RTC_CNTL_XTAL32K_RESTART_WAIT_S 4 /* RTC_CNTL_XTAL32K_RETURN_WAIT : R/W ;bitpos:[3:0] ;default: 4'h0 ; */ /*description: cycles to wait to return noral xtal 32k*/ #define RTC_CNTL_XTAL32K_RETURN_WAIT 0x0000000F #define RTC_CNTL_XTAL32K_RETURN_WAIT_M ((RTC_CNTL_XTAL32K_RETURN_WAIT_V)<<(RTC_CNTL_XTAL32K_RETURN_WAIT_S)) #define RTC_CNTL_XTAL32K_RETURN_WAIT_V 0xF #define RTC_CNTL_XTAL32K_RETURN_WAIT_S 0 #define RTC_CNTL_USB_CONF_REG (DR_REG_RTCCNTL_BASE + 0x00EC) /* RTC_CNTL_IO_MUX_RESET_DISABLE : R/W ;bitpos:[18] ;default: 1'd0 ; */ /*description: */ #define RTC_CNTL_IO_MUX_RESET_DISABLE (BIT(18)) #define RTC_CNTL_IO_MUX_RESET_DISABLE_M (BIT(18)) #define RTC_CNTL_IO_MUX_RESET_DISABLE_V 0x1 #define RTC_CNTL_IO_MUX_RESET_DISABLE_S 18 #define RTC_CNTL_SLP_REJECT_CAUSE_REG (DR_REG_RTCCNTL_BASE + 0x00F0) /* RTC_CNTL_REJECT_CAUSE : RO ;bitpos:[17:0] ;default: 18'd0 ; */ /*description: sleep reject cause*/ #define RTC_CNTL_REJECT_CAUSE 0x0003FFFF #define RTC_CNTL_REJECT_CAUSE_M ((RTC_CNTL_REJECT_CAUSE_V)<<(RTC_CNTL_REJECT_CAUSE_S)) #define RTC_CNTL_REJECT_CAUSE_V 0x3FFFF #define RTC_CNTL_REJECT_CAUSE_S 0 #define RTC_CNTL_OPTION1_REG (DR_REG_RTCCNTL_BASE + 0x00F4) /* RTC_CNTL_FORCE_DOWNLOAD_BOOT : R/W ;bitpos:[0] ;default: 1'd0 ; */ /*description: */ #define RTC_CNTL_FORCE_DOWNLOAD_BOOT (BIT(0)) #define RTC_CNTL_FORCE_DOWNLOAD_BOOT_M (BIT(0)) #define RTC_CNTL_FORCE_DOWNLOAD_BOOT_V 0x1 #define RTC_CNTL_FORCE_DOWNLOAD_BOOT_S 0 #define RTC_CNTL_SLP_WAKEUP_CAUSE_REG (DR_REG_RTCCNTL_BASE + 0x00F8) /* RTC_CNTL_WAKEUP_CAUSE : RO ;bitpos:[16:0] ;default: 17'd0 ; */ /*description: sleep wakeup cause*/ #define RTC_CNTL_WAKEUP_CAUSE 0x0001FFFF #define RTC_CNTL_WAKEUP_CAUSE_M ((RTC_CNTL_WAKEUP_CAUSE_V)<<(RTC_CNTL_WAKEUP_CAUSE_S)) #define RTC_CNTL_WAKEUP_CAUSE_V 0x1FFFF #define RTC_CNTL_WAKEUP_CAUSE_S 0 #define RTC_CNTL_ULP_CP_TIMER_1_REG (DR_REG_RTCCNTL_BASE + 0x00FC) /* RTC_CNTL_ULP_CP_TIMER_SLP_CYCLE : R/W ;bitpos:[31:8] ;default: 24'd200 ; */ /*description: sleep cycles for ULP-coprocessor timer*/ #define RTC_CNTL_ULP_CP_TIMER_SLP_CYCLE 0x00FFFFFF #define RTC_CNTL_ULP_CP_TIMER_SLP_CYCLE_M ((RTC_CNTL_ULP_CP_TIMER_SLP_CYCLE_V)<<(RTC_CNTL_ULP_CP_TIMER_SLP_CYCLE_S)) #define RTC_CNTL_ULP_CP_TIMER_SLP_CYCLE_V 0xFFFFFF #define RTC_CNTL_ULP_CP_TIMER_SLP_CYCLE_S 8 #define RTC_CNTL_INT_ENA_W1TS_REG (DR_REG_RTCCNTL_BASE + 0x0100) /* RTC_CNTL_BBPLL_CAL_INT_ENA_W1TS : WO ;bitpos:[20] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BBPLL_CAL_INT_ENA_W1TS (BIT(20)) #define RTC_CNTL_BBPLL_CAL_INT_ENA_W1TS_M (BIT(20)) #define RTC_CNTL_BBPLL_CAL_INT_ENA_W1TS_V 0x1 #define RTC_CNTL_BBPLL_CAL_INT_ENA_W1TS_S 20 /* RTC_CNTL_GLITCH_DET_INT_ENA_W1TS : WO ;bitpos:[19] ;default: 1'b0 ; */ /*description: enbale gitch det interrupt*/ #define RTC_CNTL_GLITCH_DET_INT_ENA_W1TS (BIT(19)) #define RTC_CNTL_GLITCH_DET_INT_ENA_W1TS_M (BIT(19)) #define RTC_CNTL_GLITCH_DET_INT_ENA_W1TS_V 0x1 #define RTC_CNTL_GLITCH_DET_INT_ENA_W1TS_S 19 /* RTC_CNTL_XTAL32K_DEAD_INT_ENA_W1TS : WO ;bitpos:[16] ;default: 1'b0 ; */ /*description: enable xtal32k_dead interrupt*/ #define RTC_CNTL_XTAL32K_DEAD_INT_ENA_W1TS (BIT(16)) #define RTC_CNTL_XTAL32K_DEAD_INT_ENA_W1TS_M (BIT(16)) #define RTC_CNTL_XTAL32K_DEAD_INT_ENA_W1TS_V 0x1 #define RTC_CNTL_XTAL32K_DEAD_INT_ENA_W1TS_S 16 /* RTC_CNTL_SWD_INT_ENA_W1TS : WO ;bitpos:[15] ;default: 1'b0 ; */ /*description: enable super watch dog interrupt*/ #define RTC_CNTL_SWD_INT_ENA_W1TS (BIT(15)) #define RTC_CNTL_SWD_INT_ENA_W1TS_M (BIT(15)) #define RTC_CNTL_SWD_INT_ENA_W1TS_V 0x1 #define RTC_CNTL_SWD_INT_ENA_W1TS_S 15 /* RTC_CNTL_MAIN_TIMER_INT_ENA_W1TS : WO ;bitpos:[10] ;default: 1'b0 ; */ /*description: enable RTC main timer interrupt*/ #define RTC_CNTL_MAIN_TIMER_INT_ENA_W1TS (BIT(10)) #define RTC_CNTL_MAIN_TIMER_INT_ENA_W1TS_M (BIT(10)) #define RTC_CNTL_MAIN_TIMER_INT_ENA_W1TS_V 0x1 #define RTC_CNTL_MAIN_TIMER_INT_ENA_W1TS_S 10 /* RTC_CNTL_BROWN_OUT_INT_ENA_W1TS : WO ;bitpos:[9] ;default: 1'b0 ; */ /*description: enable brown out interrupt*/ #define RTC_CNTL_BROWN_OUT_INT_ENA_W1TS (BIT(9)) #define RTC_CNTL_BROWN_OUT_INT_ENA_W1TS_M (BIT(9)) #define RTC_CNTL_BROWN_OUT_INT_ENA_W1TS_V 0x1 #define RTC_CNTL_BROWN_OUT_INT_ENA_W1TS_S 9 /* RTC_CNTL_WDT_INT_ENA_W1TS : WO ;bitpos:[3] ;default: 1'b0 ; */ /*description: enable RTC WDT interrupt*/ #define RTC_CNTL_WDT_INT_ENA_W1TS (BIT(3)) #define RTC_CNTL_WDT_INT_ENA_W1TS_M (BIT(3)) #define RTC_CNTL_WDT_INT_ENA_W1TS_V 0x1 #define RTC_CNTL_WDT_INT_ENA_W1TS_S 3 /* RTC_CNTL_SLP_REJECT_INT_ENA_W1TS : WO ;bitpos:[1] ;default: 1'b0 ; */ /*description: enable sleep reject interrupt*/ #define RTC_CNTL_SLP_REJECT_INT_ENA_W1TS (BIT(1)) #define RTC_CNTL_SLP_REJECT_INT_ENA_W1TS_M (BIT(1)) #define RTC_CNTL_SLP_REJECT_INT_ENA_W1TS_V 0x1 #define RTC_CNTL_SLP_REJECT_INT_ENA_W1TS_S 1 /* RTC_CNTL_SLP_WAKEUP_INT_ENA_W1TS : WO ;bitpos:[0] ;default: 1'b0 ; */ /*description: enable sleep wakeup interrupt*/ #define RTC_CNTL_SLP_WAKEUP_INT_ENA_W1TS (BIT(0)) #define RTC_CNTL_SLP_WAKEUP_INT_ENA_W1TS_M (BIT(0)) #define RTC_CNTL_SLP_WAKEUP_INT_ENA_W1TS_V 0x1 #define RTC_CNTL_SLP_WAKEUP_INT_ENA_W1TS_S 0 #define RTC_CNTL_INT_ENA_W1TC_REG (DR_REG_RTCCNTL_BASE + 0x0104) /* RTC_CNTL_BBPLL_CAL_INT_ENA_W1TC : WO ;bitpos:[20] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_BBPLL_CAL_INT_ENA_W1TC (BIT(20)) #define RTC_CNTL_BBPLL_CAL_INT_ENA_W1TC_M (BIT(20)) #define RTC_CNTL_BBPLL_CAL_INT_ENA_W1TC_V 0x1 #define RTC_CNTL_BBPLL_CAL_INT_ENA_W1TC_S 20 /* RTC_CNTL_GLITCH_DET_INT_ENA_W1TC : WO ;bitpos:[19] ;default: 1'b0 ; */ /*description: enbale gitch det interrupt*/ #define RTC_CNTL_GLITCH_DET_INT_ENA_W1TC (BIT(19)) #define RTC_CNTL_GLITCH_DET_INT_ENA_W1TC_M (BIT(19)) #define RTC_CNTL_GLITCH_DET_INT_ENA_W1TC_V 0x1 #define RTC_CNTL_GLITCH_DET_INT_ENA_W1TC_S 19 /* RTC_CNTL_XTAL32K_DEAD_INT_ENA_W1TC : WO ;bitpos:[16] ;default: 1'b0 ; */ /*description: enable xtal32k_dead interrupt*/ #define RTC_CNTL_XTAL32K_DEAD_INT_ENA_W1TC (BIT(16)) #define RTC_CNTL_XTAL32K_DEAD_INT_ENA_W1TC_M (BIT(16)) #define RTC_CNTL_XTAL32K_DEAD_INT_ENA_W1TC_V 0x1 #define RTC_CNTL_XTAL32K_DEAD_INT_ENA_W1TC_S 16 /* RTC_CNTL_SWD_INT_ENA_W1TC : WO ;bitpos:[15] ;default: 1'b0 ; */ /*description: enable super watch dog interrupt*/ #define RTC_CNTL_SWD_INT_ENA_W1TC (BIT(15)) #define RTC_CNTL_SWD_INT_ENA_W1TC_M (BIT(15)) #define RTC_CNTL_SWD_INT_ENA_W1TC_V 0x1 #define RTC_CNTL_SWD_INT_ENA_W1TC_S 15 /* RTC_CNTL_MAIN_TIMER_INT_ENA_W1TC : WO ;bitpos:[10] ;default: 1'b0 ; */ /*description: enable RTC main timer interrupt*/ #define RTC_CNTL_MAIN_TIMER_INT_ENA_W1TC (BIT(10)) #define RTC_CNTL_MAIN_TIMER_INT_ENA_W1TC_M (BIT(10)) #define RTC_CNTL_MAIN_TIMER_INT_ENA_W1TC_V 0x1 #define RTC_CNTL_MAIN_TIMER_INT_ENA_W1TC_S 10 /* RTC_CNTL_BROWN_OUT_INT_ENA_W1TC : WO ;bitpos:[9] ;default: 1'b0 ; */ /*description: enable brown out interrupt*/ #define RTC_CNTL_BROWN_OUT_INT_ENA_W1TC (BIT(9)) #define RTC_CNTL_BROWN_OUT_INT_ENA_W1TC_M (BIT(9)) #define RTC_CNTL_BROWN_OUT_INT_ENA_W1TC_V 0x1 #define RTC_CNTL_BROWN_OUT_INT_ENA_W1TC_S 9 /* RTC_CNTL_WDT_INT_ENA_W1TC : WO ;bitpos:[3] ;default: 1'b0 ; */ /*description: enable RTC WDT interrupt*/ #define RTC_CNTL_WDT_INT_ENA_W1TC (BIT(3)) #define RTC_CNTL_WDT_INT_ENA_W1TC_M (BIT(3)) #define RTC_CNTL_WDT_INT_ENA_W1TC_V 0x1 #define RTC_CNTL_WDT_INT_ENA_W1TC_S 3 /* RTC_CNTL_SLP_REJECT_INT_ENA_W1TC : WO ;bitpos:[1] ;default: 1'b0 ; */ /*description: enable sleep reject interrupt*/ #define RTC_CNTL_SLP_REJECT_INT_ENA_W1TC (BIT(1)) #define RTC_CNTL_SLP_REJECT_INT_ENA_W1TC_M (BIT(1)) #define RTC_CNTL_SLP_REJECT_INT_ENA_W1TC_V 0x1 #define RTC_CNTL_SLP_REJECT_INT_ENA_W1TC_S 1 /* RTC_CNTL_SLP_WAKEUP_INT_ENA_W1TC : WO ;bitpos:[0] ;default: 1'b0 ; */ /*description: enable sleep wakeup interrupt*/ #define RTC_CNTL_SLP_WAKEUP_INT_ENA_W1TC (BIT(0)) #define RTC_CNTL_SLP_WAKEUP_INT_ENA_W1TC_M (BIT(0)) #define RTC_CNTL_SLP_WAKEUP_INT_ENA_W1TC_V 0x1 #define RTC_CNTL_SLP_WAKEUP_INT_ENA_W1TC_S 0 #define RTC_CNTL_RETENTION_CTRL_REG (DR_REG_RTCCNTL_BASE + 0x0108) /* RTC_CNTL_RETENTION_WAIT : R/W ;bitpos:[31:27] ;default: 5'd20 ; */ /*description: wait cycles for rention operation*/ #define RTC_CNTL_RETENTION_WAIT 0x0000001F #define RTC_CNTL_RETENTION_WAIT_M ((RTC_CNTL_RETENTION_WAIT_V)<<(RTC_CNTL_RETENTION_WAIT_S)) #define RTC_CNTL_RETENTION_WAIT_V 0x1F #define RTC_CNTL_RETENTION_WAIT_S 27 /* RTC_CNTL_RETENTION_EN : R/W ;bitpos:[26] ;default: 1'd0 ; */ /*description: */ #define RTC_CNTL_RETENTION_EN (BIT(26)) #define RTC_CNTL_RETENTION_EN_M (BIT(26)) #define RTC_CNTL_RETENTION_EN_V 0x1 #define RTC_CNTL_RETENTION_EN_S 26 /* RTC_CNTL_RETENTION_CLKOFF_WAIT : R/W ;bitpos:[25:22] ;default: 4'd3 ; */ /*description: */ #define RTC_CNTL_RETENTION_CLKOFF_WAIT 0x0000000F #define RTC_CNTL_RETENTION_CLKOFF_WAIT_M ((RTC_CNTL_RETENTION_CLKOFF_WAIT_V)<<(RTC_CNTL_RETENTION_CLKOFF_WAIT_S)) #define RTC_CNTL_RETENTION_CLKOFF_WAIT_V 0xF #define RTC_CNTL_RETENTION_CLKOFF_WAIT_S 22 /* RTC_CNTL_RETENTION_DONE_WAIT : R/W ;bitpos:[21:19] ;default: 3'd2 ; */ /*description: */ #define RTC_CNTL_RETENTION_DONE_WAIT 0x00000007 #define RTC_CNTL_RETENTION_DONE_WAIT_M ((RTC_CNTL_RETENTION_DONE_WAIT_V)<<(RTC_CNTL_RETENTION_DONE_WAIT_S)) #define RTC_CNTL_RETENTION_DONE_WAIT_V 0x7 #define RTC_CNTL_RETENTION_DONE_WAIT_S 19 /* RTC_CNTL_RETENTION_CLK_SEL : R/W ;bitpos:[18] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_RETENTION_CLK_SEL (BIT(18)) #define RTC_CNTL_RETENTION_CLK_SEL_M (BIT(18)) #define RTC_CNTL_RETENTION_CLK_SEL_V 0x1 #define RTC_CNTL_RETENTION_CLK_SEL_S 18 #define RTC_CNTL_FIB_SEL_REG (DR_REG_RTCCNTL_BASE + 0x010C) /* RTC_CNTL_FIB_SEL : R/W ;bitpos:[2:0] ;default: 3'd7 ; */ /*description: select use analog fib signal*/ #define RTC_CNTL_FIB_SEL 0x00000007 #define RTC_CNTL_FIB_SEL_M ((RTC_CNTL_FIB_SEL_V)<<(RTC_CNTL_FIB_SEL_S)) #define RTC_CNTL_FIB_SEL_V 0x7 #define RTC_CNTL_FIB_SEL_S 0 #define RTC_CNTL_FIB_GLITCH_RST BIT(0) #define RTC_CNTL_FIB_BOR_RST BIT(1) #define RTC_CNTL_FIB_SUPER_WDT_RST BIT(2) #define RTC_CNTL_GPIO_WAKEUP_REG (DR_REG_RTCCNTL_BASE + 0x0110) /* RTC_CNTL_GPIO_PIN0_WAKEUP_ENABLE : R/W ;bitpos:[31] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN0_WAKEUP_ENABLE (BIT(31)) #define RTC_CNTL_GPIO_PIN0_WAKEUP_ENABLE_M (BIT(31)) #define RTC_CNTL_GPIO_PIN0_WAKEUP_ENABLE_V 0x1 #define RTC_CNTL_GPIO_PIN0_WAKEUP_ENABLE_S 31 /* RTC_CNTL_GPIO_PIN1_WAKEUP_ENABLE : R/W ;bitpos:[30] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN1_WAKEUP_ENABLE (BIT(30)) #define RTC_CNTL_GPIO_PIN1_WAKEUP_ENABLE_M (BIT(30)) #define RTC_CNTL_GPIO_PIN1_WAKEUP_ENABLE_V 0x1 #define RTC_CNTL_GPIO_PIN1_WAKEUP_ENABLE_S 30 /* RTC_CNTL_GPIO_PIN2_WAKEUP_ENABLE : R/W ;bitpos:[29] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN2_WAKEUP_ENABLE (BIT(29)) #define RTC_CNTL_GPIO_PIN2_WAKEUP_ENABLE_M (BIT(29)) #define RTC_CNTL_GPIO_PIN2_WAKEUP_ENABLE_V 0x1 #define RTC_CNTL_GPIO_PIN2_WAKEUP_ENABLE_S 29 /* RTC_CNTL_GPIO_PIN3_WAKEUP_ENABLE : R/W ;bitpos:[28] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN3_WAKEUP_ENABLE (BIT(28)) #define RTC_CNTL_GPIO_PIN3_WAKEUP_ENABLE_M (BIT(28)) #define RTC_CNTL_GPIO_PIN3_WAKEUP_ENABLE_V 0x1 #define RTC_CNTL_GPIO_PIN3_WAKEUP_ENABLE_S 28 /* RTC_CNTL_GPIO_PIN4_WAKEUP_ENABLE : R/W ;bitpos:[27] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN4_WAKEUP_ENABLE (BIT(27)) #define RTC_CNTL_GPIO_PIN4_WAKEUP_ENABLE_M (BIT(27)) #define RTC_CNTL_GPIO_PIN4_WAKEUP_ENABLE_V 0x1 #define RTC_CNTL_GPIO_PIN4_WAKEUP_ENABLE_S 27 /* RTC_CNTL_GPIO_PIN5_WAKEUP_ENABLE : R/W ;bitpos:[26] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN5_WAKEUP_ENABLE (BIT(26)) #define RTC_CNTL_GPIO_PIN5_WAKEUP_ENABLE_M (BIT(26)) #define RTC_CNTL_GPIO_PIN5_WAKEUP_ENABLE_V 0x1 #define RTC_CNTL_GPIO_PIN5_WAKEUP_ENABLE_S 26 /* RTC_CNTL_GPIO_PIN0_INT_TYPE : R/W ;bitpos:[25:23] ;default: 3'd0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN0_INT_TYPE 0x00000007 #define RTC_CNTL_GPIO_PIN0_INT_TYPE_M ((RTC_CNTL_GPIO_PIN0_INT_TYPE_V)<<(RTC_CNTL_GPIO_PIN0_INT_TYPE_S)) #define RTC_CNTL_GPIO_PIN0_INT_TYPE_V 0x7 #define RTC_CNTL_GPIO_PIN0_INT_TYPE_S 23 /* RTC_CNTL_GPIO_PIN1_INT_TYPE : R/W ;bitpos:[22:20] ;default: 3'd0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN1_INT_TYPE 0x00000007 #define RTC_CNTL_GPIO_PIN1_INT_TYPE_M ((RTC_CNTL_GPIO_PIN1_INT_TYPE_V)<<(RTC_CNTL_GPIO_PIN1_INT_TYPE_S)) #define RTC_CNTL_GPIO_PIN1_INT_TYPE_V 0x7 #define RTC_CNTL_GPIO_PIN1_INT_TYPE_S 20 /* RTC_CNTL_GPIO_PIN2_INT_TYPE : R/W ;bitpos:[19:17] ;default: 3'd0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN2_INT_TYPE 0x00000007 #define RTC_CNTL_GPIO_PIN2_INT_TYPE_M ((RTC_CNTL_GPIO_PIN2_INT_TYPE_V)<<(RTC_CNTL_GPIO_PIN2_INT_TYPE_S)) #define RTC_CNTL_GPIO_PIN2_INT_TYPE_V 0x7 #define RTC_CNTL_GPIO_PIN2_INT_TYPE_S 17 /* RTC_CNTL_GPIO_PIN3_INT_TYPE : R/W ;bitpos:[16:14] ;default: 3'd0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN3_INT_TYPE 0x00000007 #define RTC_CNTL_GPIO_PIN3_INT_TYPE_M ((RTC_CNTL_GPIO_PIN3_INT_TYPE_V)<<(RTC_CNTL_GPIO_PIN3_INT_TYPE_S)) #define RTC_CNTL_GPIO_PIN3_INT_TYPE_V 0x7 #define RTC_CNTL_GPIO_PIN3_INT_TYPE_S 14 /* RTC_CNTL_GPIO_PIN4_INT_TYPE : R/W ;bitpos:[13:11] ;default: 3'd0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN4_INT_TYPE 0x00000007 #define RTC_CNTL_GPIO_PIN4_INT_TYPE_M ((RTC_CNTL_GPIO_PIN4_INT_TYPE_V)<<(RTC_CNTL_GPIO_PIN4_INT_TYPE_S)) #define RTC_CNTL_GPIO_PIN4_INT_TYPE_V 0x7 #define RTC_CNTL_GPIO_PIN4_INT_TYPE_S 11 /* RTC_CNTL_GPIO_PIN5_INT_TYPE : R/W ;bitpos:[10:8] ;default: 3'd0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN5_INT_TYPE 0x00000007 #define RTC_CNTL_GPIO_PIN5_INT_TYPE_M ((RTC_CNTL_GPIO_PIN5_INT_TYPE_V)<<(RTC_CNTL_GPIO_PIN5_INT_TYPE_S)) #define RTC_CNTL_GPIO_PIN5_INT_TYPE_V 0x7 #define RTC_CNTL_GPIO_PIN5_INT_TYPE_S 8 /* RTC_CNTL_GPIO_PIN_CLK_GATE : R/W ;bitpos:[7] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN_CLK_GATE (BIT(7)) #define RTC_CNTL_GPIO_PIN_CLK_GATE_M (BIT(7)) #define RTC_CNTL_GPIO_PIN_CLK_GATE_V 0x1 #define RTC_CNTL_GPIO_PIN_CLK_GATE_S 7 /* RTC_CNTL_GPIO_WAKEUP_STATUS_CLR : R/W ;bitpos:[6] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_WAKEUP_STATUS_CLR (BIT(6)) #define RTC_CNTL_GPIO_WAKEUP_STATUS_CLR_M (BIT(6)) #define RTC_CNTL_GPIO_WAKEUP_STATUS_CLR_V 0x1 #define RTC_CNTL_GPIO_WAKEUP_STATUS_CLR_S 6 /* RTC_CNTL_GPIO_WAKEUP_STATUS : RO ;bitpos:[5:0] ;default: 6'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_WAKEUP_STATUS 0x0000003F #define RTC_CNTL_GPIO_WAKEUP_STATUS_M ((RTC_CNTL_GPIO_WAKEUP_STATUS_V)<<(RTC_CNTL_GPIO_WAKEUP_STATUS_S)) #define RTC_CNTL_GPIO_WAKEUP_STATUS_V 0x3F #define RTC_CNTL_GPIO_WAKEUP_STATUS_S 0 #define RTC_CNTL_DBG_SEL_REG (DR_REG_RTCCNTL_BASE + 0x0114) /* RTC_CNTL_DEBUG_SEL4 : R/W ;bitpos:[31:27] ;default: 5'd0 ; */ /*description: */ #define RTC_CNTL_DEBUG_SEL4 0x0000001F #define RTC_CNTL_DEBUG_SEL4_M ((RTC_CNTL_DEBUG_SEL4_V)<<(RTC_CNTL_DEBUG_SEL4_S)) #define RTC_CNTL_DEBUG_SEL4_V 0x1F #define RTC_CNTL_DEBUG_SEL4_S 27 /* RTC_CNTL_DEBUG_SEL3 : R/W ;bitpos:[26:22] ;default: 5'd0 ; */ /*description: */ #define RTC_CNTL_DEBUG_SEL3 0x0000001F #define RTC_CNTL_DEBUG_SEL3_M ((RTC_CNTL_DEBUG_SEL3_V)<<(RTC_CNTL_DEBUG_SEL3_S)) #define RTC_CNTL_DEBUG_SEL3_V 0x1F #define RTC_CNTL_DEBUG_SEL3_S 22 /* RTC_CNTL_DEBUG_SEL2 : R/W ;bitpos:[21:17] ;default: 5'd0 ; */ /*description: */ #define RTC_CNTL_DEBUG_SEL2 0x0000001F #define RTC_CNTL_DEBUG_SEL2_M ((RTC_CNTL_DEBUG_SEL2_V)<<(RTC_CNTL_DEBUG_SEL2_S)) #define RTC_CNTL_DEBUG_SEL2_V 0x1F #define RTC_CNTL_DEBUG_SEL2_S 17 /* RTC_CNTL_DEBUG_SEL1 : R/W ;bitpos:[16:12] ;default: 5'd0 ; */ /*description: */ #define RTC_CNTL_DEBUG_SEL1 0x0000001F #define RTC_CNTL_DEBUG_SEL1_M ((RTC_CNTL_DEBUG_SEL1_V)<<(RTC_CNTL_DEBUG_SEL1_S)) #define RTC_CNTL_DEBUG_SEL1_V 0x1F #define RTC_CNTL_DEBUG_SEL1_S 12 /* RTC_CNTL_DEBUG_SEL0 : R/W ;bitpos:[11:7] ;default: 5'd0 ; */ /*description: */ #define RTC_CNTL_DEBUG_SEL0 0x0000001F #define RTC_CNTL_DEBUG_SEL0_M ((RTC_CNTL_DEBUG_SEL0_V)<<(RTC_CNTL_DEBUG_SEL0_S)) #define RTC_CNTL_DEBUG_SEL0_V 0x1F #define RTC_CNTL_DEBUG_SEL0_S 7 /* RTC_CNTL_DEBUG_BIT_SEL : R/W ;bitpos:[6:2] ;default: 5'd0 ; */ /*description: */ #define RTC_CNTL_DEBUG_BIT_SEL 0x0000001F #define RTC_CNTL_DEBUG_BIT_SEL_M ((RTC_CNTL_DEBUG_BIT_SEL_V)<<(RTC_CNTL_DEBUG_BIT_SEL_S)) #define RTC_CNTL_DEBUG_BIT_SEL_V 0x1F #define RTC_CNTL_DEBUG_BIT_SEL_S 2 /* RTC_CNTL_DEBUG_12M_NO_GATING : R/W ;bitpos:[1] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_DEBUG_12M_NO_GATING (BIT(1)) #define RTC_CNTL_DEBUG_12M_NO_GATING_M (BIT(1)) #define RTC_CNTL_DEBUG_12M_NO_GATING_V 0x1 #define RTC_CNTL_DEBUG_12M_NO_GATING_S 1 #define RTC_CNTL_DBG_MAP_REG (DR_REG_RTCCNTL_BASE + 0x0118) /* RTC_CNTL_GPIO_PIN0_FUN_SEL : R/W ;bitpos:[31:28] ;default: 4'd0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN0_FUN_SEL 0x0000000F #define RTC_CNTL_GPIO_PIN0_FUN_SEL_M ((RTC_CNTL_GPIO_PIN0_FUN_SEL_V)<<(RTC_CNTL_GPIO_PIN0_FUN_SEL_S)) #define RTC_CNTL_GPIO_PIN0_FUN_SEL_V 0xF #define RTC_CNTL_GPIO_PIN0_FUN_SEL_S 28 /* RTC_CNTL_GPIO_PIN1_FUN_SEL : R/W ;bitpos:[27:24] ;default: 4'd0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN1_FUN_SEL 0x0000000F #define RTC_CNTL_GPIO_PIN1_FUN_SEL_M ((RTC_CNTL_GPIO_PIN1_FUN_SEL_V)<<(RTC_CNTL_GPIO_PIN1_FUN_SEL_S)) #define RTC_CNTL_GPIO_PIN1_FUN_SEL_V 0xF #define RTC_CNTL_GPIO_PIN1_FUN_SEL_S 24 /* RTC_CNTL_GPIO_PIN2_FUN_SEL : R/W ;bitpos:[23:20] ;default: 4'd0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN2_FUN_SEL 0x0000000F #define RTC_CNTL_GPIO_PIN2_FUN_SEL_M ((RTC_CNTL_GPIO_PIN2_FUN_SEL_V)<<(RTC_CNTL_GPIO_PIN2_FUN_SEL_S)) #define RTC_CNTL_GPIO_PIN2_FUN_SEL_V 0xF #define RTC_CNTL_GPIO_PIN2_FUN_SEL_S 20 /* RTC_CNTL_GPIO_PIN3_FUN_SEL : R/W ;bitpos:[19:16] ;default: 4'd0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN3_FUN_SEL 0x0000000F #define RTC_CNTL_GPIO_PIN3_FUN_SEL_M ((RTC_CNTL_GPIO_PIN3_FUN_SEL_V)<<(RTC_CNTL_GPIO_PIN3_FUN_SEL_S)) #define RTC_CNTL_GPIO_PIN3_FUN_SEL_V 0xF #define RTC_CNTL_GPIO_PIN3_FUN_SEL_S 16 /* RTC_CNTL_GPIO_PIN4_FUN_SEL : R/W ;bitpos:[15:12] ;default: 4'd0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN4_FUN_SEL 0x0000000F #define RTC_CNTL_GPIO_PIN4_FUN_SEL_M ((RTC_CNTL_GPIO_PIN4_FUN_SEL_V)<<(RTC_CNTL_GPIO_PIN4_FUN_SEL_S)) #define RTC_CNTL_GPIO_PIN4_FUN_SEL_V 0xF #define RTC_CNTL_GPIO_PIN4_FUN_SEL_S 12 /* RTC_CNTL_GPIO_PIN5_FUN_SEL : R/W ;bitpos:[11:8] ;default: 4'd0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN5_FUN_SEL 0x0000000F #define RTC_CNTL_GPIO_PIN5_FUN_SEL_M ((RTC_CNTL_GPIO_PIN5_FUN_SEL_V)<<(RTC_CNTL_GPIO_PIN5_FUN_SEL_S)) #define RTC_CNTL_GPIO_PIN5_FUN_SEL_V 0xF #define RTC_CNTL_GPIO_PIN5_FUN_SEL_S 8 /* RTC_CNTL_GPIO_PIN0_MUX_SEL : R/W ;bitpos:[7] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN0_MUX_SEL (BIT(7)) #define RTC_CNTL_GPIO_PIN0_MUX_SEL_M (BIT(7)) #define RTC_CNTL_GPIO_PIN0_MUX_SEL_V 0x1 #define RTC_CNTL_GPIO_PIN0_MUX_SEL_S 7 /* RTC_CNTL_GPIO_PIN1_MUX_SEL : R/W ;bitpos:[6] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN1_MUX_SEL (BIT(6)) #define RTC_CNTL_GPIO_PIN1_MUX_SEL_M (BIT(6)) #define RTC_CNTL_GPIO_PIN1_MUX_SEL_V 0x1 #define RTC_CNTL_GPIO_PIN1_MUX_SEL_S 6 /* RTC_CNTL_GPIO_PIN2_MUX_SEL : R/W ;bitpos:[5] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN2_MUX_SEL (BIT(5)) #define RTC_CNTL_GPIO_PIN2_MUX_SEL_M (BIT(5)) #define RTC_CNTL_GPIO_PIN2_MUX_SEL_V 0x1 #define RTC_CNTL_GPIO_PIN2_MUX_SEL_S 5 /* RTC_CNTL_GPIO_PIN3_MUX_SEL : R/W ;bitpos:[4] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN3_MUX_SEL (BIT(4)) #define RTC_CNTL_GPIO_PIN3_MUX_SEL_M (BIT(4)) #define RTC_CNTL_GPIO_PIN3_MUX_SEL_V 0x1 #define RTC_CNTL_GPIO_PIN3_MUX_SEL_S 4 /* RTC_CNTL_GPIO_PIN4_MUX_SEL : R/W ;bitpos:[3] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN4_MUX_SEL (BIT(3)) #define RTC_CNTL_GPIO_PIN4_MUX_SEL_M (BIT(3)) #define RTC_CNTL_GPIO_PIN4_MUX_SEL_V 0x1 #define RTC_CNTL_GPIO_PIN4_MUX_SEL_S 3 /* RTC_CNTL_GPIO_PIN5_MUX_SEL : R/W ;bitpos:[2] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_GPIO_PIN5_MUX_SEL (BIT(2)) #define RTC_CNTL_GPIO_PIN5_MUX_SEL_M (BIT(2)) #define RTC_CNTL_GPIO_PIN5_MUX_SEL_V 0x1 #define RTC_CNTL_GPIO_PIN5_MUX_SEL_S 2 #define RTC_CNTL_SENSOR_CTRL_REG (DR_REG_RTCCNTL_BASE + 0x011C) /* RTC_CNTL_FORCE_XPD_SAR : R/W ;bitpos:[31:30] ;default: 2'b0 ; */ /*description: */ #define RTC_CNTL_FORCE_XPD_SAR 0x00000003 #define RTC_CNTL_FORCE_XPD_SAR_M ((RTC_CNTL_FORCE_XPD_SAR_V)<<(RTC_CNTL_FORCE_XPD_SAR_S)) #define RTC_CNTL_FORCE_XPD_SAR_V 0x3 #define RTC_CNTL_FORCE_XPD_SAR_S 30 /* RTC_CNTL_SAR2_PWDET_CCT : R/W ;bitpos:[29:27] ;default: 3'd0 ; */ /*description: */ #define RTC_CNTL_SAR2_PWDET_CCT 0x00000007 #define RTC_CNTL_SAR2_PWDET_CCT_M ((RTC_CNTL_SAR2_PWDET_CCT_V)<<(RTC_CNTL_SAR2_PWDET_CCT_S)) #define RTC_CNTL_SAR2_PWDET_CCT_V 0x7 #define RTC_CNTL_SAR2_PWDET_CCT_S 27 #define RTC_CNTL_DBG_SAR_SEL_REG (DR_REG_RTCCNTL_BASE + 0x0120) /* RTC_CNTL_SAR_DEBUG_SEL : R/W ;bitpos:[31:27] ;default: 5'd0 ; */ /*description: */ #define RTC_CNTL_SAR_DEBUG_SEL 0x0000001F #define RTC_CNTL_SAR_DEBUG_SEL_M ((RTC_CNTL_SAR_DEBUG_SEL_V)<<(RTC_CNTL_SAR_DEBUG_SEL_S)) #define RTC_CNTL_SAR_DEBUG_SEL_V 0x1F #define RTC_CNTL_SAR_DEBUG_SEL_S 27 #define RTC_CNTL_PG_CTRL_REG (DR_REG_RTCCNTL_BASE + 0x0124) /* RTC_CNTL_POWER_GLITCH_EN : R/W ;bitpos:[31] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_POWER_GLITCH_EN (BIT(31)) #define RTC_CNTL_POWER_GLITCH_EN_M (BIT(31)) #define RTC_CNTL_POWER_GLITCH_EN_V 0x1 #define RTC_CNTL_POWER_GLITCH_EN_S 31 /* RTC_CNTL_POWER_GLITCH_EFUSE_SEL : R/W ;bitpos:[30] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_POWER_GLITCH_EFUSE_SEL (BIT(30)) #define RTC_CNTL_POWER_GLITCH_EFUSE_SEL_M (BIT(30)) #define RTC_CNTL_POWER_GLITCH_EFUSE_SEL_V 0x1 #define RTC_CNTL_POWER_GLITCH_EFUSE_SEL_S 30 /* RTC_CNTL_POWER_GLITCH_FORCE_PU : R/W ;bitpos:[29] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_POWER_GLITCH_FORCE_PU (BIT(29)) #define RTC_CNTL_POWER_GLITCH_FORCE_PU_M (BIT(29)) #define RTC_CNTL_POWER_GLITCH_FORCE_PU_V 0x1 #define RTC_CNTL_POWER_GLITCH_FORCE_PU_S 29 /* RTC_CNTL_POWER_GLITCH_FORCE_PD : R/W ;bitpos:[28] ;default: 1'b0 ; */ /*description: */ #define RTC_CNTL_POWER_GLITCH_FORCE_PD (BIT(28)) #define RTC_CNTL_POWER_GLITCH_FORCE_PD_M (BIT(28)) #define RTC_CNTL_POWER_GLITCH_FORCE_PD_V 0x1 #define RTC_CNTL_POWER_GLITCH_FORCE_PD_S 28 /* RTC_CNTL_POWER_GLITCH_DSENSE : R/W ;bitpos:[27:26] ;default: 2'b0 ; */ /*description: */ #define RTC_CNTL_POWER_GLITCH_DSENSE 0x00000003 #define RTC_CNTL_POWER_GLITCH_DSENSE_M ((RTC_CNTL_POWER_GLITCH_DSENSE_V)<<(RTC_CNTL_POWER_GLITCH_DSENSE_S)) #define RTC_CNTL_POWER_GLITCH_DSENSE_V 0x3 #define RTC_CNTL_POWER_GLITCH_DSENSE_S 26 #define RTC_CNTL_DATE_REG (DR_REG_RTCCNTL_BASE + 0x01fc) /* RTC_CNTL_CNTL_DATE : R/W ;bitpos:[27:0] ;default: 28'h2007270 ; */ /*description: */ #define RTC_CNTL_CNTL_DATE 0x0FFFFFFF #define RTC_CNTL_CNTL_DATE_M ((RTC_CNTL_CNTL_DATE_V)<<(RTC_CNTL_CNTL_DATE_S)) #define RTC_CNTL_CNTL_DATE_V 0xFFFFFFF #define RTC_CNTL_CNTL_DATE_S 0 #ifdef __cplusplus } #endif #endif /*_SOC_RTC_CNTL_REG_H_ */