#!/bin/bash
#
# @echo off
#
# Compare results of two runs of tests
#
# (for comments see Do and asltsrun utilities).

# Compare the summary information of two runs
# arg1 - the first run test status lines file
# arg2 - the second run test status lines file
cmp_two_runs()
{
	local ret

	echo "diff old: $1 -- new: $2"
	diff -s "$1" "$2"
	ret=$?
	echo ""
	return $ret
}

# Chose line of file by head
# arg1 - file pathname
# arg2 - delimiter
# arg3 - string, the first element of line
chose_line_of_file()
{
	cat "$1" |\
	while [ 1 ]
	do
		read line
		if [ $? -ne 0 ] ; then
			break
		fi

		tcasename=`echo "$line" | awk -F"$2" '{print $2}'`
		if [ "$tcasename" == "$3" ]; then
			echo "$line"
			return 1
		fi
	done
}

# Compare and report two run times
#
# arg1 - run time 1
# arg2 - run time 2
#
# Return:
#     0 - T1 == T2
#     1 - T1 < T2
#     2 - T1 > T2
#   3 - bad layout of T1
#   4 - bad layout of T2
report_run_time_cmp()
{
	local rval=0 str ret t0 t1
	local diff01 diff01str


	str=`diff_of_str_times "$1" "$2"`
	ret=$?

	if [ $ret -gt 2 ] ; then
		echo "report_run_time_cmp: bad layout, <$1>, <$2>"
		return 3
	fi

	t0=`echo "$str" | awk -F"|" '{print $1}'`
	t1=`echo "$str" | awk -F"|" '{print $2}'`
	diff01=`echo "$str" | awk -F"|" '{print $3}'`
	diff01str=`echo "$str" | awk -F"|" '{print $4}'`

	if [ $ret -eq 2 ] ; then
		# 2 means arg1 is greater than arg2
		percent=$[ ($diff01 * 10000) / ($t1 * 100 + 1) ]
		echo "WARNING, TOTAL, time of tests run grown from $2 to $1, (+$diff01str, $percent% of $2)"
		rval=2
	elif [ $ret -eq 1 ] ; then
		# 1 means arg1 is less than arg2
		percent=$[ ($diff01 * 10000) / ($t0 * 100 + 1) ]
		echo "INFO,    TOTAL, time of tests run reduced from "$2" to "$1", (-$diff01str, $percent% of $2)"
		rval=1
	fi

	return $rval
}

# Compare and report two memory statistics
# arg1 - the test case name
# arg2 - component
# arg3 - the value on the first run
# arg4 - the value on the second run
report_mem_stat_cmp()
{
	local rval=0 x percent

	if [[ $4 -eq 0 ]]; then
		return 0
	fi

#
# We are only interested in memory differences that are greater than 10%
#
	if [[ $3 -gt $4 ]]; then
		x=$[ $3 - $4 ]
		percent=$[ ($x * 100) / $4 ]

		if [[ $percent -lt 10 ]]; then
			return 1
		fi
		echo "WARNING, $1, memory use grown ($2): $3, $4, (+$x, $percent% of $4)"
		rval=1
	elif [[ $3 -lt $4 ]]; then
		x=$[ $4 - $3 ]
		percent=$[ ($x * 100) / $4 ]

		if [[ $percent -lt 10 ]]; then
			return 2
		fi
		echo "INFO,    $1, memory use reduced ($2): $3, $4, (-$x, $percent% of $4)"
		rval=2
	fi
	return $rval
}

# Compare and report two exceptions statistics
# arg1 - the test case name
# arg2 - component
# arg3 - the value on the first run
# arg4 - the value on the second run
report_exceptions_stat_cmp()
{
	local rval=0

	if [[ $3 -gt $4 ]]; then
		echo "WARNING, $1, exceptions occurrence number grown ($2): $3, $4"
		rval=1
	elif [[ $3 -lt $4 ]]; then
		echo "INFO,    $1, exceptions occurrence number reduced ($2): $3, $4"
		rval=2
	fi
	return $rval
}

# Compare status lines of the same test case of two different runs
# arg1 - the first run test case status line
# arg2 - the second run test case status line
# arg3 - the test case name
cmp_two_status_lines()
{
	local rval=0

	local memtotal00
	local outstand00
	local outstand01
	local max00 max01 max02 max03 max04 max05
	local out00 out01 out02 out03 out04 out05

	local memtotal10
	local outstand10
	local outstand11
	local max10 max11 max12 max13 max14 max15
	local out10 out11 out12 out13 out14 out15

	local totalmem0
	local totaloutstand00
	local totaltime0
	local totaloutstand01

	local totalmem1
	local totaloutstand10
	local totaltime1
	local totaloutstand11

	local exceptionsnum0
	local exceptionsnum1

	if [ "$3" == TOTAL ]; then
		totaloutstand00=`echo "$1" | awk -F"|" '{print $3}'`
		totalmem0=`echo "$1" | awk -F"|" '{print $4}'`
		totaltime0=`echo "$1" | awk -F"|" '{print $5}'`
		totaloutstand01=`echo "$1" | awk -F"|" '{print $6}'`

		totaloutstand10=`echo "$2" | awk -F"|" '{print $3}'`
		totalmem1=`echo "$2" | awk -F"|" '{print $4}'`
		totaltime1=`echo "$2" | awk -F"|" '{print $5}'`
		totaloutstand11=`echo "$2" | awk -F"|" '{print $6}'`

		if [ x$totaloutstand01 == x ]; then
			# For obsolete layout
			return 0
		fi

		if [ x$totaloutstand11 == x ]; then
			# For obsolete layout
			return 0
		fi

		report_run_time_cmp "$totaltime0" "$totaltime1"
		if [ $? -eq 2 ]; then
			rval=1
		fi

		report_mem_stat_cmp "$3" total_memory $totalmem0 $totalmem1
		if [ $? -eq 1 ]; then
			rval=1
		fi

		report_mem_stat_cmp "$3" total_outstand0 $totaloutstand00 $totaloutstand10
		if [ $? -eq 1 ]; then
			rval=1
		fi

		report_mem_stat_cmp "$3" total_outstand1 $totaloutstand01 $totaloutstand11
		if [ $? -eq 1 ]; then
			rval=1
		fi

		return $rval
	fi

	memtotal00=`echo "$1" | awk -F"|" '{print $12}'`
	if [ x$memtotal00 == x ]; then
		# For obsolete layout
		return 0
	fi

	memtotal10=`echo "$2" | awk -F"|" '{print $12}'`
	if [ x$memtotal10 == x ]; then
		# For obsolete layout
		return 0
	fi

	if [ "$DO_COMPARE_OF_EXCEPTIONS" == "yes" ]; then
		exceptionsnum0=`echo "$1" | awk -F"|" '{print $28}'`
		exceptionsnum1=`echo "$2" | awk -F"|" '{print $28}'`
		report_exceptions_stat_cmp "$3" exceptionsnum $exceptionsnum0 $exceptionsnum1
		if [ $? -eq 1 ]; then
			rval=1
		fi
	fi

	if [ "$DO_COMPARE_OF_TEST_CASES" == "yes" ]; then

	outstand00=`echo "$1" | awk -F"|" '{print $10}'`
	max00=`echo "$1" | awk -F"|" '{print $13}'`
	max01=`echo "$1" | awk -F"|" '{print $14}'`
	max02=`echo "$1" | awk -F"|" '{print $15}'`
	max03=`echo "$1" | awk -F"|" '{print $16}'`
	max04=`echo "$1" | awk -F"|" '{print $17}'`
	max05=`echo "$1" | awk -F"|" '{print $18}'`
	out00=`echo "$1" | awk -F"|" '{print $19}'`
	out01=`echo "$1" | awk -F"|" '{print $20}'`
	out02=`echo "$1" | awk -F"|" '{print $21}'`
	out03=`echo "$1" | awk -F"|" '{print $22}'`
	out04=`echo "$1" | awk -F"|" '{print $23}'`
	out05=`echo "$1" | awk -F"|" '{print $24}'`
	outstand01=`echo "$1" | awk -F"|" '{print $25}'`

	outstand10=`echo "$2" | awk -F"|" '{print $10}'`
	max10=`echo "$2" | awk -F"|" '{print $13}'`
	max11=`echo "$2" | awk -F"|" '{print $14}'`
	max12=`echo "$2" | awk -F"|" '{print $15}'`
	max13=`echo "$2" | awk -F"|" '{print $16}'`
	max14=`echo "$2" | awk -F"|" '{print $17}'`
	max15=`echo "$2" | awk -F"|" '{print $18}'`
	out10=`echo "$2" | awk -F"|" '{print $19}'`
	out11=`echo "$2" | awk -F"|" '{print $20}'`
	out12=`echo "$2" | awk -F"|" '{print $21}'`
	out13=`echo "$2" | awk -F"|" '{print $22}'`
	out14=`echo "$2" | awk -F"|" '{print $23}'`
	out15=`echo "$2" | awk -F"|" '{print $24}'`
	outstand11=`echo "$2" | awk -F"|" '{print $25}'`


	report_mem_stat_cmp "$3" memtotal $memtotal00 $memtotal10
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" outstand0 $outstand00 $outstand10
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" outstand1 $outstand01 $outstand11
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" max0 $max00 $max10
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" max1 $max01 $max11
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" max2 $max02 $max12
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" max3 $max03 $max13
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" max4 $max04 $max14
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" max5 $max05 $max15
	if [ $? -eq 1 ]; then
		rval=1
	fi

	report_mem_stat_cmp "$3" out0 $out00 $out10
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" out1 $out01 $out11
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" out2 $out02 $out12
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" out3 $out03 $out13
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" out4 $out04 $out14
	if [ $? -eq 1 ]; then
		rval=1
	fi
	report_mem_stat_cmp "$3" out5 $out05 $out15
	if [ $? -eq 1 ]; then
		rval=1
	fi

	fi


	return $rval
}

# Unpack file into array,
# element of array is a line of file.
# arg1 - path name of file
unpack_file_into_array()
{
	x=`cat "$1" | sort |\
	while [ 1 ]
	do
		read line
		if [ $? -ne 0 ] ; then
			break
		fi
		echo "$line"
	done`
	echo "$x"
}

# Compare the memory consumption statistics of two runs
# arg1 - the first run test cases status lines file
# arg2 - the second run test cases status lines file
cmp_memory_of_two_runs()
{
	local rval=0 index=0 index_of_last_found=0 length=0

	ARRAY=

	file1=`unpack_file_into_array "$1"`
	file2=`unpack_file_into_array "$2"`

	# Put second input into array

	for line in $file2
	do
		if [ x"$line" == x ]; then
			continue
		fi
		ARRAY[$index]="$line"
		index=$[ $index + 1 ]
	done

	length=$index

	if [ "$length" -eq 0 ]; then
		echo "Empty file <$2>"
		return 0
	fi

	# Run through the first input and check equivalent line from the
	# array of second input, do one pass only through both inputs (they
	# are sorted identically).

	for i in $file1
	do
		tcasename0=`echo "$i" | awk -F"|" '{print $2}'`

		if [ x"$tcasename0" == x ]; then
			continue
		fi

		index=$index_of_last_found

		while [ 1 ]
		do
			if [ "$index" -ge "$length" ]; then
				break
			fi

			line="${ARRAY[$index]}"
			index=$[ $index + 1 ]
			tcasename1=`echo "$line" | awk -F"|" '{print $2}'`
			if [ "$tcasename1" == "$tcasename0" ]; then
				index_of_last_found=$index
				cmp_two_status_lines "$i" "$line" "$tcasename0"
				if [ $? -ne 0 ]; then
					rval=1
				fi
				if [ "$DO_COMPARE_TOTAL_ONLY" == yes -a "$tcasename0" == TOTAL ]; then
					echo "!!!!!!!, REDUCED MODE OF STAT CMP: only TOTAL statistics was compared!"
					return $rval
				fi

				break
			fi
		done
	done

	return $rval
}

# Determine the test status lines files
# corresponding to the first and the second
# runs and initiate comparing of them.
# arg1 - second multi-result directory
# arg2 - second bitmap of mode
# arg3 - first multi-result directory
# arg4 - first bitmap of mode
do_compare_two_runs()
{
	local rval=100 ret mark path0 path1 exists0 exists1 path2 path3
	local modepart0 modename0
	local modepart1 modename1

	modepart0=`get_mode_string $2 0`
	modename0=`get_mode_string $2 1`
	modepart1=`get_mode_string $4 0`
	modename1=`get_mode_string $4 1`

	path0="$1/$modepart0/__STATUS_OF_TESTS"
	path1="$3/$modepart1/__STATUS_OF_TESTS"

	echo ""
	mark="================"
	echo "$mark Comparing results of <$modename0> and <$modename1>:"

	exists0=0
	exists1=0
	ret=1

	if [ -f "$path0" ]; then
		exists0=1
	fi
	if [ -f "$path1" ]; then
		exists1=1
	fi

	if [ $exists0 == 1 -a $exists1 == 1 ]; then
		cmp_two_runs "$path0" "$path1"
		ret=$?

		if [ "$DO_MEMSTAT" == "yes" ]; then
			path2="$3/$modepart1/__STATUS_OF_TEST_CASES"
			path3="$1/$modepart0/__STATUS_OF_TEST_CASES"
			cmp_memory_of_two_runs "$path2" "$path3"
		fi
	fi

	if [ $exists0 == 1 -a $exists1 == 1 ]; then
		if [ $ret == 0 ]; then
			rval=$CMP_CMP_OP
			echo "$mark `cmp_result_opcode_to_str $rval`"
		else
			rval=$CMP_MISCMP_OP
			echo "$mark `cmp_result_opcode_to_str $rval`"
			UTILSTATUS=1
		fi
	elif [ $exists0 == 1 ]; then
		rval=$CMP_NO_SECOND_OP
		echo "$mark `cmp_result_opcode_to_str $rval`"
	elif [ $exists1 == 1 ]; then
		rval=$CMP_NO_FIRST_OP
		echo "$mark `cmp_result_opcode_to_str $rval`"
	else
		rval=$CMP_NO_BOTH_OP
		echo "$mark `cmp_result_opcode_to_str $rval`"
	fi

	echo ""
	echo "Failures in new version: `grep -c FAIL $path1` -- $path1"
	echo "Failures in old version: `grep -c FAIL $path0` -- $path0"
	echo ""
	return $rval
}

# Convert opcode of result of comparing to string
# arg1 - opcode of result of comparing
cmp_result_opcode_to_str()
{
	local msg

	case $1 in
		$CMP_CMP_OP) msg=compared;;
		$CMP_MISCMP_OP) msg=miscompared;;
		$CMP_NO_SECOND_OP) msg="- (the SUMMARY file of second run doesn't exist)";;
		$CMP_NO_FIRST_OP) msg="- (the SUMMARY file of first run doesn't exist)";;
		$CMP_NO_BOTH_OP) msg="- (the SUMMARY files of both runs don't exist)";;
		*) msg="???"
	esac

	echo "$msg"
}

# ############################## MAIN ###############################

# Initialize the common variables

# Constants

# Opcodes of result of comparing
CMP_CMP_OP=0
CMP_MISCMP_OP=1
CMP_NO_SECOND_OP=2
CMP_NO_FIRST_OP=3
CMP_NO_BOTH_OP=4