/*
 * Copyright (c) 2024 A Labs GmbH
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * This overlay defines a fake LoRa PHY node which is required to build the driver.
 */

#include <zephyr/dt-bindings/lora/sx126x.h>

/ {
	chosen {
		zephyr,code-partition = &slot0_partition;
	};

	aliases {
		lora0 = &lora;
	};

	test {
		#address-cells = <1>;
		#size-cells = <1>;

		test_spi: spi@33334444 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "vnd,spi";
			reg = <0x33334444 0x1000>;
			status = "okay";
			clock-frequency = <2000000>;

			cs-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;

			lora: lora@0 {
				compatible = "semtech,sx1262";
				status = "okay";
				reg = <0>;
				reset-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
				busy-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
				tx-enable-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
				rx-enable-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
				dio1-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
				dio2-tx-enable;
				dio3-tcxo-voltage = <SX126X_DIO3_TCXO_3V3>;
				tcxo-power-startup-delay-ms = <5>;
				spi-max-frequency = <1000000>;
			};
		};
	};
};