/*
 * Copyright 2023 Google LLC
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <zephyr/dt-bindings/input/input-event-codes.h>

/ {
	test {
		#address-cells = <1>;
		#size-cells = <1>;

		test_adc: adc@adc0adc0 {
			compatible = "vnd,adc";
			reg = <0xadc0adc0 0x1000>;
			#io-channel-cells = <1>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "okay";

			channel@0 {
				reg = <0>;
				zephyr,gain = "ADC_GAIN_1";
				zephyr,reference = "ADC_REF_VDD_1";
				zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
			};
		};

		test_gpio: gpio@0 {
			compatible = "vnd,gpio";
			gpio-controller;
			reg = <0x0 0x1000>;
			#gpio-cells = <0x2>;
			status = "okay";
		};

		adc-keys {
			compatible = "adc-keys";
			io-channels = <&test_adc 0>;
			keyup-threshold-mv = <0>;
			button_0 {
				press-thresholds-mv = <1500>, <1750>;
				zephyr,code = <0>;
			};
			button_1 {
				press-thresholds-mv = <2500>, <1750>;
				zephyr,code = <1>;
			};
		};

		gpio-keys {
			compatible = "gpio-keys";
			debounce-interval-ms = <30>;
			button_0 {
				gpios = <&test_gpio 0 0>;
				zephyr,code = <0>;
			};
		};

		gpio-keys-polled {
			compatible = "gpio-keys";
			debounce-interval-ms = <30>;
			button_0 {
				gpios = <&test_gpio 0 0>;
				zephyr,code = <0>;
			};
			polling-mode;
		};

		evdev {
			compatible = "zephyr,native-linux-evdev";
		};

		kbd-matrix-0 {
			compatible = "gpio-kbd-matrix";
			row-gpios = <&test_gpio 0 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>,
				    <&test_gpio 1 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			col-gpios = <&test_gpio 2 GPIO_ACTIVE_LOW>,
				    <&test_gpio 3 GPIO_ACTIVE_LOW>,
				    <&test_gpio 4 GPIO_ACTIVE_LOW>;
			actual-key-mask = <0x0f 0x0a 0x0b>;

			keymap {
				compatible = "input-keymap";
				keymap = <0 1 2>;
				row-size = <2>;
				col-size = <2>;
			};
		};

		kbd-matrix-1 {
			compatible = "gpio-kbd-matrix";
			row-gpios = <&test_gpio 0 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>,
				    <&test_gpio 1 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>,
				    <&test_gpio 2 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>;
			col-gpios = <&test_gpio 3 GPIO_ACTIVE_HIGH>,
				    <&test_gpio 4 GPIO_ACTIVE_HIGH>;
			col-drive-inactive;
			idle-mode = "poll";
		};

		kbd-matrix-2 {
			compatible = "gpio-kbd-matrix";
			row-gpios = <&test_gpio 0 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>,
				    <&test_gpio 1 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>,
				    <&test_gpio 2 (GPIO_PULL_DOWN | GPIO_ACTIVE_HIGH)>;
			col-gpios = <&test_gpio 3 GPIO_ACTIVE_HIGH>,
				    <&test_gpio 4 GPIO_ACTIVE_HIGH>;
			poll-timeout-ms = <0>;
			idle-mode = "scan";
		};

		qdec-gpio {
			compatible = "gpio-qdec";
			gpios = <&test_gpio 0 0>, <&test_gpio 1 0>;
			steps-per-period = <4>;
			zephyr,axis = <0>;
			sample-time-us = <2000>;
			idle-timeout-ms = <200>;
		};

		qdec-gpio-polled {
			compatible = "gpio-qdec";
			gpios = <&test_gpio 0 0>, <&test_gpio 1 0>;
			led-gpios = <&test_gpio 2 0>;
			led-pre-us = <5>;
			steps-per-period = <4>;
			zephyr,axis = <0>;
			sample-time-us = <2000>;
			idle-timeout-ms = <200>;
			idle-poll-time-us = <5000>;
		};

		analog_axis {
			compatible = "analog-axis";
			axis-x {
				io-channels = <&test_adc 0>;
				out-min = <(-127)>;
				out-max = <127>;
				in-deadzone = <8>;
				in-min = <(-100)>;
				in-max = <100>;
				zephyr,axis = <0>;
				invert-input;
				invert-output;
			};
		};

		longpress: longpress {
			input = <&longpress>;
			compatible = "zephyr,input-longpress";
			input-codes = <0>;
			short-codes = <0>;
			long-codes = <0>;
			long-delay-ms = <100>;
		};

		double_tap: doubletap {
			input = <&double_tap>;
			compatible = "zephyr,input-double-tap";
			input-codes = <0>;
			double-tap-codes = <0>;
			double-tap-delay-ms = <0>;
		};

		test_uart: uart@55556666 {
			compatible = "vnd,serial";
			reg = <0x55556666 0x1000>;
			status = "okay";

			#address-cells = <1>;
			#size-cells = <0>;

			sbus {
				compatible = "futaba,sbus";
				right_stick_x {
					channel = <1>;
					type = <INPUT_EV_ABS>;
					zephyr,code = <INPUT_ABS_RX>;
				};
			};
		};

		i2c@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "vnd,i2c";
			reg = <0x1 0x1000>;
			status = "okay";
			clock-frequency = <100000>;

			ft5336@0 {
				compatible = "focaltech,ft5336";
				reg = <0x0>;
				int-gpios = <&test_gpio 0 0>;
			};

			gt911@1 {
				compatible = "goodix,gt911";
				reg = <0x1>;
				irq-gpios = <&test_gpio 0 0>;
				reset-gpios = <&test_gpio 1 0>;
			};

			cst816s@2 {
				compatible = "hynitron,cst816s";
				reg = <0x2>;
				irq-gpios = <&test_gpio 0 0>;
				rst-gpios = <&test_gpio 1 0>;
			};

			cap12xx@3 {
				compatible = "microchip,cap12xx";
				reg = <0x3>;
				int-gpios = <&test_gpio 0 0>;
				input-codes = <0 1 2>;
			};

			stmpe811@4 {
				compatible = "st,stmpe811";
				reg = <0x4>;
				int-gpios = <&test_gpio 0 0>;
				panel-driver-settling-time-us = <10>;
				touch-detect-delay-us = <10>;
				touch-average-control = <1>;
				tracking-index = <0>;
			};

			pat@5 {
				compatible = "pixart,pat912x";
				reg = <0x5>;
				motion-gpios = <&test_gpio 0 0>;
				zephyr,axis-x = <0>;
				zephyr,axis-y = <1>;
				res-x-cpi = <0>;
				res-y-cpi = <0>;
				invert-x;
				invert-y;
				sleep1-enable;
				sleep2-enable;
			};

			cf1133@6 {
				compatible = "sitronix,cf1133";
				reg = <0x6>;
				int-gpios = <&test_gpio 0 0>;
			};

			chsc6x@7 {
				compatible = "chipsemi,chsc6x";
				reg = <0x7>;
				irq-gpios = <&test_gpio 0 0>;
			};

			pinnacle@8 {
				compatible = "cirque,pinnacle";
				reg = <0x8>;
				data-ready-gpios = <&test_gpio 0 0>;
				data-mode = "relative";
				primary-tap-enable;
				swap-xy;
			};

			touch_dev: ili2132a@9 {
				compatible = "ilitek,ili2132a";
				reg = <0x9>;
				irq-gpios = <&test_gpio 0 0>;
				rst-gpios = <&test_gpio 1 0>;
			};

			nunchuk@a {
				reg = <0xa>;
				compatible= "nintendo,nunchuk";
			};
		};

		spi@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "vnd,spi";
			reg = <0x2 0x1000>;
			status = "okay";
			clock-frequency = <2000000>;

			/* one entry for every devices */
			cs-gpios = <&test_gpio 0 0>,
				   <&test_gpio 1 0>,
				   <&test_gpio 2 0>,
				   <&test_gpio 3 0>;

			xpt2046@0 {
				compatible = "xptek,xpt2046";
				spi-max-frequency = <0>;
				reg = <0x0>;
				int-gpios = <&test_gpio 0 0>;
				touchscreen-size-x = <10>;
				touchscreen-size-y = <10>;
				min-x = <0>;
				min-y = <0>;
				max-x = <1>;
				max-y = <1>;
			};

			pmw3610@1 {
				compatible = "pixart,pmw3610";
				spi-max-frequency = <0>;
				reg = <0x1>;
				motion-gpios = <&test_gpio 0 0>;
				reset-gpios = <&test_gpio 1 0>;
				zephyr,axis-x = <0>;
				zephyr,axis-y = <1>;
				invert-x;
				invert-y;
				force-awake;
				smart-mode;
			};

			pinnacle@2 {
				compatible = "cirque,pinnacle";
				reg = <0x2>;
				spi-max-frequency = <0>;
				data-ready-gpios = <&test_gpio 0 0>;
				data-mode = "absolute";
				idle-packets-count = <20>;
				clipping-enable;
				scaling-enable;
				invert-x;
				invert-y;
			};

			paw32xx@3 {
				compatible = "pixart,paw32xx";
				reg = <3>;
				spi-max-frequency = <0>;
				motion-gpios = <&test_gpio 0 0>;
				zephyr,axis-x = <0>;
				zephyr,axis-y = <1>;
				invert-x;
				invert-y;
				res-cpi = <800>;
			};
		};
	};
};