# Copyright (c) 2023 Antmicro <www.antmicro.com>
# SPDX-License-Identifier: Apache-2.0

description: Ambiq STIMER

compatible: "ambiq,stimer"

include: base.yaml

properties:
  reg:
    required: true

  interrupts:
    required: true

  clk-source:
    type: int
    required: true
    description: |
      clk-source specifies the clock source that used by the system timer.
      For Apollo3:
      0 - NOCLK : No clock enabled.
      1 - HFRC_DIV16 : 3MHz from the HFRC clock divider.
      2 - HFRC_DIV256 : 187.5KHz from the HFRC clock divider.
      3 - XTAL_DIV1 : 32768Hz from the crystal oscillator.
      4 - XTAL_DIV2 : 16384Hz from the crystal oscillator.
      5 - XTAL_DIV32 : 1024Hz from the crystal oscillator.
      6 - LFRC_DIV1 : Approximately 1KHz from the LFRC oscillator (uncalibrated).
      7 - CTIMER0A : Use CTIMER 0 section A as a prescaler.
      8 - CTIMER0B : Use CTIMER 0 section B (or A and B linked together) as a prescaler.
      For Apollo4:
      0 - NOCLK : No clock enabled.
      1 - HFRC_6MHZ : 6MHz from the HFRC clock divider.
      2 - HFRC_375KHZ : 375KHz from the HFRC clock divider.
      3 - XTAL_32KHZ : 32768Hz from the crystal oscillator.
      4 - XTAL_16KHZ : 16384Hz from the crystal oscillator.
      5 - XTAL_1KHZ : 1024Hz from the crystal oscillator.
      6 - LFRC_1KHZ : Approximately 1KHz from the LFRC oscillator (uncalibrated).
      7 - CTIMER0 : Use CTIMER 0 for the clock source (allows prescaling from other system clocks).
      8 - CTIMER1 : Use CTIMER 1 for the clock source (allows prescaling from other system clocks).