# Copyright (c) 2023-2024 STMicroelectronics
# Copyright (c) 2023 PHYTEC Messtechnik GmbH
# SPDX-License-Identifier: Apache-2.0

description: |
    When setting the odr, lpf, avg properties in a .dts or .dtsi file
    you may include ilps22qs.h and use the macros defined there.

    Example:
    #include <zephyr/dt-bindings/sensor/ilps22qs.h>

    ilps22qs@5d {
      ...

      odr = <LPS2xDF_DT_ODR_10HZ>;
      lpf = <LPS2xDF_DT_LP_FILTER_ODR_4>;
      avg = <LPS2xDF_DT_AVG_128_SAMPLES>;
    };

include: sensor-device.yaml

properties:
  odr:
    type: int
    default: 0
    description: |
        Specify the output data rate expressed in samples per second (Hz).
        The default is the power-on reset value.

        - 0 # LPS2xDF_DT_ODR_POWER_DOWN
        - 1 # LPS2xDF_DT_ODR_1HZ
        - 2 # LPS2xDF_DT_ODR_4HZ
        - 3 # LPS2xDF_DT_ODR_10HZ
        - 4 # LPS2xDF_DT_ODR_25HZ
        - 5 # LPS2xDF_DT_ODR_50HZ
        - 6 # LPS2xDF_DT_ODR_75HZ
        - 7 # LPS2xDF_DT_ODR_100HZ
        - 8 # LPS2xDF_DT_ODR_200HZ

    enum: [0, 1, 2, 3, 4, 5, 6, 7, 8]

  lpf:
    type: int
    default: 0
    description: |
        Specify the low pass filter value to be applied to pressure data.
        The default is the power-on reset value.

        - 0 # LPS2xDF_DT_LP_FILTER_OFF
        - 1 # LPS2xDF_DT_LP_FILTER_ODR_4
        - 3 # LPS2xDF_DT_LP_FILTER_ODR_9

    enum: [0, 1, 3]

  avg:
    type: int
    default: 0
    description: |
        Specify the average filter value (i.e. number of samples) to be applied
        to pressure and temperature data.
        The default is the power-on reset value.

        - 0 # LPS2xDF_DT_AVG_4_SAMPLES
        - 1 # LPS2xDF_DT_AVG_8_SAMPLES
        - 2 # LPS2xDF_DT_AVG_16_SAMPLES
        - 3 # LPS2xDF_DT_AVG_32_SAMPLES
        - 4 # LPS2xDF_DT_AVG_64_SAMPLES
        - 5 # LPS2xDF_DT_AVG_128_SAMPLES
        - 6 # LPS2xDF_DT_AVG_256_SAMPLES
        - 7 # LPS2xDF_DT_AVG_512_SAMPLES

    enum: [0, 1, 2, 3, 4, 5, 6, 7]

  fs:
    type: int
    default: 0
    description: |
        Specify the full-scale mode.
        The default is the power-on reset value.

        - 0 # ILPS22QS_DT_FS_MODE_1_1260
        - 1 # ILPS22QS_DT_FS_MODE_2_4060
    enum: [0, 1]