# Copyright (c) 2024 Jerónimo Agulló
# SPDX-License-Identifier: Apache-2.0

description: |
    GPIO pins exposed on micromod headers.

    The micromod standard leverages the M.2 connector with 76 pins for
    swap between a myriad of supported boards and carriers.

    The micromod standard consists of two lanes with the following
    supported buses:
    * An 6-pin Power Supply header.  No pins on this header are exposed
      by this binding.
    * Reset, Boot pins and SWD pins not exposed by this binding.
    * 2 UART buses. First with RTS and CTS pins, while the 2nd with only
    RX and TX pins. Neither of them are exposed by this binding.
    * 2 i2c buses. Only the corresponding interrupt pin is exposed by
    this binding.
    * 2 SPI buses not exposed by this binding. Only SPI CS control pin
      is exposed by this binding.
    * Audio line not exposed by this binding.
    * 2 analog pins (A0 and A1).
    * 2 digital pins (D0 and D1).
    * 12 General purpose pins (G0 - G11).

    This binding provides a nexus mapping for the analog, digital and
    general purpose gpios in the order depicted below:

      - 00 -> A0                      PIN 34
      - 01 -> A1                      PIN 38
      - 02 -> D0                      PIN 10
      - 03 -> D1/CAM_TRIG             PIN 18
      - 04 -> I2C_INT#                PIN 16
      - 05 -> G0/BUS0                 PIN 40
      - 06 -> G1/BUS1                 PIN 42
      - 07 -> G2/BUS2                 PIN 44
      - 08 -> G3/BUS3                 PIN 46
      - 09 -> G4/BUS4                 PIN 48
      - 10 -> G5/BUS5                 PIN 73
      - 11 -> G6/BUS6                 PIN 71
      - 12 -> G7/BUS7                 PIN 69
      - 13 -> G8                      PIN 67
      - 14 -> G9/ADC_D-/CAM_HSYNC     PIN 65
      - 15 -> G10/ADC_D+/CAM_VSYNC    PIN 63
      - 16 -> G11/SWO                 PIN  8
      - 17 -> SPI_CS                  PIN 55


compatible: "sparkfun,micromod-gpio"

include: [gpio-nexus.yaml, base.yaml]