/*
 * Copyright (c) 2023 PSICONTROl nv
 * Copyright (c) 2023 STMicroelectronics
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <st/u5/stm32u5.dtsi>


/ {
	soc {
		compatible = "st,stm32u595", "st,stm32u5", "simple-bus";

		pinctrl: pin-controller@42020000 {
			compatible = "st,stm32-pinctrl";
			#address-cells = <1>;
			#size-cells = <1>;
			reg = <0x42020000 0x2800>;

			gpioj: gpio@42022400 {
				compatible = "st,stm32-gpio";
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x42022400 0x400>;
				clocks = <&rcc STM32_CLOCK(AHB2, 9U)>;
			};
		};

		usart6: serial@40006400 {
			compatible = "st,stm32-usart", "st,stm32-uart";
			reg = <0x40006400 0x400>;
			clocks = <&rcc STM32_CLOCK(APB1, 25U)>;
			resets = <&rctl STM32_RESET(APB1L, 25U)>;
			interrupts = <126 0>;
			status = "disabled";
		};

		i2c5: i2c@40009800 {
			compatible = "st,stm32-i2c-v2";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40009800 0x400>;
			clocks = <&rcc STM32_CLOCK(APB1_2, 6U)>;
			interrupts = <128 0>, <127 0>;
			interrupt-names = "event", "error";
			status = "disabled";
		};

		i2c6: i2c@40009c00 {
			compatible = "st,stm32-i2c-v2";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40009c00 0x400>;
			clocks = <&rcc STM32_CLOCK(APB1_2, 7U)>;
			interrupts = <130 0>, <129 0>;
			interrupt-names = "event", "error";
			status = "disabled";
		};

		/* Available in STM32U59x/5Ax/5Fx/5Gx SoCs */
		adc2: adc@42028100 {
			compatible = "st,stm32-adc";
			reg = <0x42028100 0x400>;
			clocks = <&rcc STM32_CLOCK(AHB2, 10U)>,
				 <&rcc STM32_SRC_HCLK ADCDAC_SEL(0)>;
			interrupts = <37 0>;
			status = "disabled";
			#io-channel-cells = <1>;
			resolutions = <STM32_ADC_RES(14, 0x00)
				       STM32_ADC_RES(12, 0x01)
				       STM32_ADC_RES(10, 0x02)
				       STM32_ADC_RES(8, 0x03)>;
			sampling-times = <5 6 12 20 36 68 391 814>;
			st,adc-clock-source = "ASYNC";
			st,adc-sequencer = "FULLY_CONFIGURABLE";
			st,adc-oversampler = "OVERSAMPLER_EXTENDED";
		};

		/*
		 * Available in STM32U59x/5Ax/5Fx/5Gx SoCs
		 * dual mode: adc1 and adc2 coupled
		 */
		adc1_2: adc@42028300 {
			compatible = "st,stm32-adc";
			reg = <0x42028300 0x400>;
			clocks = <&rcc STM32_CLOCK(AHB2, 10U)>;
			interrupts = <37 0>;
			status = "disabled";
			#io-channel-cells = <1>;
			resolutions = <STM32_ADC_RES(14, 0x00)
				       STM32_ADC_RES(12, 0x01)
				       STM32_ADC_RES(10, 0x02)
				       STM32_ADC_RES(8, 0x03)>;
			sampling-times = <5 6 12 20 36 68 391 814>;
			st,adc-clock-source = "ASYNC";
			st,adc-sequencer = "FULLY_CONFIGURABLE";
			st,adc-oversampler = "OVERSAMPLER_EXTENDED";
		};

		usbotg_hs: otghs@42040000 {
			compatible = "st,stm32-otghs";
			reg = <0x42040000 0x20000>;
			interrupts = <73 0>;
			interrupt-names = "otghs";
			num-bidir-endpoints = <9>;
			ram-size = <4096>;
			maximum-speed = "high-speed";
			clocks = <&rcc STM32_CLOCK(AHB2, 14U)>;
			phys = <&otghs_phy>;
			status = "disabled";
		};
	};

	otghs_phy: otghs_phy {
		compatible = "st,stm32u5-otghs-phy";
		clocks = <&rcc STM32_CLOCK(AHB2, 15U)>,
			 <&rcc STM32_SRC_HSE OTGHS_SEL(0)>;
		#phy-cells = <0>;
	};

	smbus5: smbus5 {
		compatible = "st,stm32-smbus";
		#address-cells = <1>;
		#size-cells = <0>;
		i2c = <&i2c5>;
		status = "disabled";
	};

	smbus6: smbus6 {
		compatible = "st,stm32-smbus";
		#address-cells = <1>;
		#size-cells = <0>;
		i2c = <&i2c6>;
		status = "disabled";
	};
};