/* * Copyright (c) 2020 Thomas Stranger * * SPDX-License-Identifier: Apache-2.0 */ #include / { soc { compatible = "st,stm32g0b0", "st,stm32g0", "simple-bus"; pinctrl: pin-controller@50000000 { gpioe: gpio@50001000 { compatible = "st,stm32-gpio"; gpio-controller; #gpio-cells = <2>; reg = <0x50001000 0x400>; clocks = <&rcc STM32_CLOCK(IOP, 4U)>; }; }; usart5: serial@40005000 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40005000 0x400>; clocks = <&rcc STM32_CLOCK(APB1, 8U)>; resets = <&rctl STM32_RESET(APB1L, 8U)>; interrupts = <29 0>; status = "disabled"; }; usart6: serial@40013c00 { compatible = "st,stm32-usart", "st,stm32-uart"; reg = <0x40013c00 0x400>; clocks = <&rcc STM32_CLOCK(APB1, 9U)>; resets = <&rctl STM32_RESET(APB1L, 9U)>; interrupts = <29 0>; status = "disabled"; }; timers4: timers@40000800 { compatible = "st,stm32-timers"; reg = <0x40000800 0x400>; clocks = <&rcc STM32_CLOCK(APB1, 2U)>; resets = <&rctl STM32_RESET(APB1L, 2U)>; interrupts = <16 0>; interrupt-names = "global"; st,prescaler = <0>; status = "disabled"; pwm { compatible = "st,stm32-pwm"; status = "disabled"; #pwm-cells = <3>; }; }; i2c3: i2c@40008800 { compatible = "st,stm32-i2c-v2"; clock-frequency = ; #address-cells = <1>; #size-cells = <0>; reg = <0x40008800 0x400>; clocks = <&rcc STM32_CLOCK(APB1, 23U)>; interrupts = <24 0>; interrupt-names = "combined"; status = "disabled"; }; spi3: spi@40003c00 { compatible = "st,stm32-spi-fifo", "st,stm32-spi"; #address-cells = <1>; #size-cells = <0>; reg = <0x40003c00 0x400>; clocks = <&rcc STM32_CLOCK(APB1, 15U)>; interrupts = <26 3>; status = "disabled"; }; dma2: dma@40020400 { compatible = "st,stm32-dma-v2"; #dma-cells = <3>; reg = <0x40020400 0x400>; interrupts = <11 0 11 0 11 0 11 0 11 0>; clocks = <&rcc STM32_CLOCK(AHB1, 1U)>; dma-requests = <5>; dma-offset = <7>; status = "disabled"; }; dmamux1: dmamux@40020800 { dma-channels = <12>; }; usb: usb@40005c00 { compatible = "st,stm32-usb"; reg = <0x40005c00 0x400>; interrupts = <8 0>; interrupt-names = "usb"; num-bidir-endpoints = <8>; ram-size = <2048>; phys = <&usb_fs_phy>; clocks = <&rcc STM32_CLOCK(APB1, 13U)>, <&rcc STM32_SRC_HSI48 USB_SEL(0)>; status = "disabled"; }; }; usb_fs_phy: usbphy { compatible = "usb-nop-xceiv"; #phy-cells = <0>; }; smbus3: smbus3 { compatible = "st,stm32-smbus"; #address-cells = <1>; #size-cells = <0>; i2c = <&i2c3>; status = "disabled"; }; };