/*
 * Copyright (c) 2018 Philémon Jaermann
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <st/f4/stm32f401.dtsi>
#include <zephyr/dt-bindings/clock/stm32f410_clock.h>
#include <zephyr/dt-bindings/memory-controller/stm32-fmc-sdram.h>

/ {
	clocks {
		plli2s: plli2s {
			compatible = "st,stm32f411-plli2s-clock";
		};
	};

	soc {
		compatible = "st,stm32f446", "st,stm32f4", "simple-bus";

		i2s1: i2s@40013000 {
			compatible = "st,stm32-i2s";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x40013000 0x400>;
			clocks = <&rcc STM32_CLOCK(APB2, 12U)>;
			interrupts = <35 5>;
			dmas = <&dma2 3 3 0x400 0x3
				&dma2 2 3 0x400 0x3>;
			dma-names = "tx", "rx";
			status = "disabled";
		};

		usart3: serial@40004800 {
			compatible = "st,stm32-usart", "st,stm32-uart";
			reg = <0x40004800 0x400>;
			clocks = <&rcc STM32_CLOCK(APB1, 18U)>;
			resets = <&rctl STM32_RESET(APB1, 18U)>;
			interrupts = <39 0>;
			status = "disabled";
		};

		uart4: serial@40004c00 {
			compatible ="st,stm32-uart";
			reg = <0x40004c00 0x400>;
			clocks = <&rcc STM32_CLOCK(APB1, 19U)>;
			resets = <&rctl STM32_RESET(APB1, 19U)>;
			interrupts = <52 0>;
			status = "disabled";
		};

		uart5: serial@40005000 {
			compatible = "st,stm32-uart";
			reg = <0x40005000 0x400>;
			clocks = <&rcc STM32_CLOCK(APB1, 20U)>;
			resets = <&rctl STM32_RESET(APB1, 20U)>;
			interrupts = <53 0>;
			status = "disabled";
		};

		can1: can@40006400 {
			compatible = "st,stm32-bxcan";
			reg = <0x40006400 0x400>;
			interrupts = <19 0>, <20 0>, <21 0>, <22 0>;
			interrupt-names = "TX", "RX0", "RX1", "SCE";
			clocks = <&rcc STM32_CLOCK(APB1, 25U)>;
			status = "disabled";
		};

		can2: can@40006800 {
			compatible = "st,stm32-bxcan";
			reg = <0x40006800 0x400>;
			interrupts = <63 0>, <64 0>, <65 0>, <66 0>;
			interrupt-names = "TX", "RX0", "RX1", "SCE";
			/* also enabling clock for can1 (master instance) */
			clocks = <&rcc STM32_CLOCK(APB1, 26U)>;
			master-can-reg = <0x40006400>;
			status = "disabled";
		};

		usbotg_fs: usb@50000000 {
			num-bidir-endpoints = <6>;
			clocks = <&rcc STM32_CLOCK(AHB2, 7U)>,
				 <&rcc STM32_SRC_PLL_Q CK48M_SEL(0)>;
		};

		usbotg_hs: usb@40040000 {
			compatible = "st,stm32-otghs";
			reg = <0x40040000 0x40000>;
			interrupts = <77 0>, <74 0>, <75 0>;
			interrupt-names = "otghs", "ep1_out", "ep1_in";
			num-bidir-endpoints = <9>;
			ram-size = <4096>;
			maximum-speed = "full-speed";
			phys = <&otghs_fs_phy>;
			clocks = <&rcc STM32_CLOCK(AHB1, 29U)>,
				 <&rcc STM32_SRC_PLL_Q CK48M_SEL(0)>;
			status = "disabled";
		};

		backup_sram: memory@40024000 {
			compatible = "zephyr,memory-region", "st,stm32-backup-sram";
			reg = <0x40024000 DT_SIZE_K(4)>;
			clocks = <&rcc STM32_CLOCK(AHB1, 18U)>;
			zephyr,memory-region = "BACKUP_SRAM";
			status = "disabled";
		};

		adc2: adc@40012100 {
			compatible = "st,stm32-adc";
			reg = <0x40012100 0x050>;
			clocks = <&rcc STM32_CLOCK(APB2, 9U)>;
			interrupts = <18 0>;
			status = "disabled";
			#io-channel-cells = <1>;
			resolutions = <STM32_ADC_RES(12, 0x00)
				       STM32_ADC_RES(10, 0x01)
				       STM32_ADC_RES(8, 0x02)
				       STM32_ADC_RES(6, 0x03)>;
			sampling-times = <3 15 28 56 84 112 144 480>;
			st,adc-clock-source = "SYNC";
			st,adc-sequencer = "FULLY_CONFIGURABLE";
			st,adc-oversampler = "OVERSAMPLER_NONE";
		};

		adc3: adc@40012200 {
			compatible = "st,stm32-adc";
			reg = <0x40012200 0x050>;
			clocks = <&rcc STM32_CLOCK(APB2, 10U)>;
			interrupts = <18 0>;
			status = "disabled";
			#io-channel-cells = <1>;
			resolutions = <STM32_ADC_RES(12, 0x00)
				       STM32_ADC_RES(10, 0x01)
				       STM32_ADC_RES(8, 0x02)
				       STM32_ADC_RES(6, 0x03)>;
			sampling-times = <3 15 28 56 84 112 144 480>;
			st,adc-clock-source = "SYNC";
			st,adc-sequencer = "FULLY_CONFIGURABLE";
			st,adc-oversampler = "OVERSAMPLER_NONE";
		};

		dac1: dac@40007400 {
			compatible = "st,stm32-dac";
			reg = <0x40007400 0x400>;
			clocks = <&rcc STM32_CLOCK(APB1, 29U)>;
			status = "disabled";
			#io-channel-cells = <1>;
		};

		fmc: memory-controller@a0000000 {
			compatible = "st,stm32-fmc";
			reg = <0xa0000000 0x400>;
			clocks = <&rcc STM32_CLOCK(AHB3, 0U)>;
			status = "disabled";

			sdram: sdram {
				compatible = "st,stm32-fmc-sdram";
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};
		};
	};

	die_temp: dietemp {
		io-channels = <&adc1 18>;
	};

	otghs_fs_phy: otghs_fs_phy {
		compatible = "usb-nop-xceiv";
		#phy-cells = <0>;
	};
};