/*
 * Copyright 2024 NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <mem.h>
#include <zephyr/dt-bindings/clock/mcux_lpc_syscon_clock.h>
#include <zephyr/dt-bindings/reset/nxp_syscon_reset_common.h>
#include <zephyr/dt-bindings/gpio/gpio.h>
#include <arm/armv8-m.dtsi>
#include <zephyr/dt-bindings/memory-attr/memory-attr-arm.h>

/ {
	cpus: cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			compatible = "arm,cortex-m33f";
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <1>;

			mpu: mpu@e000ed90 {
				compatible = "arm,armv8m-mpu";
				reg = <0xe000ed90 0x40>;
			};
		};
	};

	pinctrl: pinctrl {
		compatible = "nxp,port-pinctrl";
		status = "okay";
	};
};

&sram {
	#address-cells = <1>;
	#size-cells = <1>;

	sramx: memory@4000000 {
		compatible =  "zephyr,memory-region", "mmio-sram";
		reg = <0x4000000 DT_SIZE_K(96)>;
		zephyr,memory-region = "SRAM1";
		zephyr,memory-attr = <( DT_MEM_ARM(ATTR_MPU_RAM) )>;
	};

	/* mcxn23x Memory configurations:
	 *
	 * RAM blocks RAMA through SRAM4 are contiguous address ranges
	 *
	 * MCXN23X: 352KB RAM, RAMX: 96K, RAMA: 32K, RAMB: 32K,
	 *                     RAMC: 64K, RAMD: 64K, RAME: 64K
	 */
	sram0: memory@20000000 {
		compatible = "mmio-sram";
		reg = <0x20000000 DT_SIZE_K(256)>;
	};
};

&peripheral {
	#address-cells = <1>;
	#size-cells = <1>;

	syscon: syscon@0 {
		compatible = "nxp,lpc-syscon";
		reg = <0x0 0x4000>;
		#clock-cells = <1>;
		reset: reset {
			compatible = "nxp,lpc-syscon-reset";
			#reset-cells = <1>;
		};
	};

	porta: pinmux@116000 {
		compatible = "nxp,port-pinmux";
		reg = <0x116000 0x1000>;
		clocks = <&syscon MCUX_PORT0_CLK>;
	};

	portb: pinmux@117000 {
		compatible = "nxp,port-pinmux";
		reg = <0x117000 0x1000>;
		clocks = <&syscon MCUX_PORT1_CLK>;
	};

	portc: pinmux@118000 {
		compatible = "nxp,port-pinmux";
		reg = <0x118000 0x1000>;
		clocks = <&syscon MCUX_PORT2_CLK>;
	};

	portd: pinmux@119000 {
		compatible = "nxp,port-pinmux";
		reg = <0x119000 0x1000>;
		clocks = <&syscon MCUX_PORT3_CLK>;
	};

	porte: pinmux@11a000 {
		compatible = "nxp,port-pinmux";
		reg = <0x11a000 0x1000>;
		clocks = <&syscon MCUX_PORT4_CLK>;
	};

	portf: pinmux@42000 {
		compatible = "nxp,port-pinmux";
		reg = <0x42000 0x1000>;
		clocks = <&syscon MCUX_PORT5_CLK>;
	};

	gpio0: gpio@96000 {
		compatible = "nxp,kinetis-gpio";
		status = "disabled";
		reg = <0x96000 0x1000>;
		interrupts = <17 0>,<18 0>;
		gpio-controller;
		#gpio-cells = <2>;
		nxp,kinetis-port = <&porta>;
	};

	gpio1: gpio@98000 {
		compatible = "nxp,kinetis-gpio";
		status = "disabled";
		reg = <0x98000 0x1000>;
		interrupts = <19 0>,<20 0>;
		gpio-controller;
		#gpio-cells = <2>;
		nxp,kinetis-port = <&portb>;
	};

	gpio2: gpio@9a000 {
		compatible = "nxp,kinetis-gpio";
		status = "disabled";
		reg = <0x9a000 0x1000>;
		interrupts = <21 0>,<22 0>;
		gpio-controller;
		#gpio-cells = <2>;
		nxp,kinetis-port = <&portc>;
	};

	gpio3: gpio@9c000 {
		compatible = "nxp,kinetis-gpio";
		status = "disabled";
		reg = <0x9c000 0x1000>;
		interrupts = <23 0>,<24 0>;
		gpio-controller;
		#gpio-cells = <2>;
		nxp,kinetis-port = <&portd>;
	};

	gpio4: gpio@9e000 {
		compatible = "nxp,kinetis-gpio";
		status = "disabled";
		reg = <0x9e000 0x1000>;
		interrupts = <25 0>,<26 0>;
		gpio-controller;
		#gpio-cells = <2>;
		nxp,kinetis-port = <&porte>;
	};

	gpio5: gpio@40000 {
		compatible = "nxp,kinetis-gpio";
		status = "disabled";
		reg = <0x40000 0x1000>;
		interrupts = <27 0>,<28 0>;
		gpio-controller;
		#gpio-cells = <2>;
		nxp,kinetis-port = <&portf>;
	};

	flexcomm0: flexcomm@92000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0x92000 0x1000>;
		interrupts = <35 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm0_lpuart0: lpuart@92000 {
			compatible = "nxp,lpuart";
			reg = <0x92000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM0_CLK>;
			status = "disabled";
		};
		flexcomm0_lpspi0: spi@92000 {
			compatible = "nxp,lpspi";
			reg = <0x92000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM0_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		flexcomm0_lpi2c0: lpi2c@92800 {
			compatible = "nxp,lpi2c";
			reg = <0x92800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM0_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm1: flexcomm@93000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0x93000 0x1000>;
		interrupts = <36 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm1_lpuart1: lpuart@93000 {
			compatible = "nxp,lpuart";
			reg = <0x93000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM1_CLK>;
			/* DMA channels 0 and 1, muxed to LPUART1 RX and TX */
			dmas = <&edma0 0 71>, <&edma0 1 72>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		flexcomm1_lpspi1: spi@93000 {
			compatible = "nxp,lpspi";
			reg = <0x93000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM1_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			/* DMA channels 0 and 1, muxed to LPSPI1 RX and TX */
			dmas = <&edma0 0 71>, <&edma0 1 72>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		flexcomm1_lpi2c1: lpi2c@93800 {
			compatible = "nxp,lpi2c";
			reg = <0x93800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM1_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm2: flexcomm@94000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0x94000 0x1000>;
		interrupts = <37 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm2_lpuart2: lpuart@94000 {
			compatible = "nxp,lpuart";
			reg = <0x94000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM2_CLK>;
			/* DMA channels 4 and 5, muxed to LPUART2 RX and TX */
			dmas = <&edma0 4 73>, <&edma0 5 74>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		flexcomm2_lpspi2: spi@94000 {
			compatible = "nxp,lpspi";
			reg = <0x94000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM2_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			/* DMA channels 4 and 5, muxed to LPSPI2 RX and TX */
			dmas = <&edma0 4 73>, <&edma0 5 74>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		flexcomm2_lpi2c2: lpi2c@94800 {
			compatible = "nxp,lpi2c";
			reg = <0x94800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM2_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm3: flexcomm@95000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0x95000 0x1000>;
		interrupts = <38 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm3_lpuart3: lpuart@95000 {
			compatible = "nxp,lpuart";
			reg = <0x95000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM3_CLK>;
			status = "disabled";
		};
		flexcomm3_lpspi3: spi@95000 {
			compatible = "nxp,lpspi";
			reg = <0x95000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM3_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		flexcomm3_lpi2c3: lpi2c@95800 {
			compatible = "nxp,lpi2c";
			reg = <0x95800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM3_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm4: flexcomm@b4000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0xb4000 0x1000>;
		interrupts = <39 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm4_lpuart4: lpuart@b4000 {
			compatible = "nxp,lpuart";
			reg = <0xb4000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM4_CLK>;
			/* DMA channels 2 and 3, muxed to LPUART4 RX and TX */
			dmas = <&edma0 2 77>, <&edma0 3 78>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		flexcomm4_lpspi4: spi@b4000 {
			compatible = "nxp,lpspi";
			reg = <0xb4000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM4_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			/* DMA channels 2 and 3, muxed to LPSPI4 RX and TX */
			dmas = <&edma0 2 77>, <&edma0 3 78>;
			dma-names = "rx", "tx";
			status = "disabled";
		};
		flexcomm4_lpi2c4: lpi2c@b4800 {
			compatible = "nxp,lpi2c";
			reg = <0xb4800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM4_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm5: flexcomm@b5000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0xb5000 0x1000>;
		interrupts = <40 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm5_lpuart5: lpuart@b5000 {
			compatible = "nxp,lpuart";
			reg = <0xb5000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM5_CLK>;
			status = "disabled";
		};
		flexcomm5_lpspi5: spi@b5000 {
			compatible = "nxp,lpspi";
			reg = <0xb5000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM5_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		flexcomm5_lpi2c5: lpi2c@b5800 {
			compatible = "nxp,lpi2c";
			reg = <0xb5800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM5_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm6: flexcomm@b6000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0xb6000 0x1000>;
		interrupts = <41 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm6_lpuart6: lpuart@b6000 {
			compatible = "nxp,lpuart";
			reg = <0xb6000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM6_CLK>;
			status = "disabled";
		};
		flexcomm6_lpspi6: spi@b6000 {
			compatible = "nxp,lpspi";
			reg = <0xb6000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM6_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		flexcomm6_lpi2c6: lpi2c@b6800 {
			compatible = "nxp,lpi2c";
			reg = <0xb6800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM6_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	flexcomm7: flexcomm@b7000 {
		compatible = "nxp,lp-flexcomm";
		reg = <0xb7000 0x1000>;
		interrupts = <42 0>;
		status = "disabled";

		ranges = <>;
		#address-cells = <1>;
		#size-cells = <1>;

		flexcomm7_lpuart7: lpuart@b7000 {
			compatible = "nxp,lpuart";
			reg = <0xb7000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM7_CLK>;
			status = "disabled";
		};
		flexcomm7_lpspi7: spi@b7000 {
			compatible = "nxp,lpspi";
			reg = <0xb7000 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM7_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
		flexcomm7_lpi2c7: lpi2c@b7800 {
			compatible = "nxp,lpi2c";
			reg = <0xb7800 0x1000>;
			clocks = <&syscon MCUX_FLEXCOMM7_CLK>;
			#address-cells = <1>;
			#size-cells = <0>;
			status = "disabled";
		};
	};

	edma0: dma-controller@80000 {
		#dma-cells = <2>;
		compatible = "nxp,mcux-edma";
		nxp,version = <4>;
		dma-channels = <16>;
		dma-requests = <120>;

		reg = <0x80000 0x1000>;
		interrupts = <1 0>, <2 0>, <3 0>, <4 0>,
			<5 0>, <6 0>, <7 0>, <8 0>,
			<9 0>, <10 0>, <11 0>, <12 0>,
			<13 0>, <14 0>, <15 0>, <16 0>;
		no-error-irq;
		status = "disabled";
	};

	edma1: dma-controller@a0000 {
		#dma-cells = <2>;
		compatible = "nxp,mcux-edma";
		nxp,version = <4>;
		dma-channels = <16>;
		dma-requests = <120>;

		reg = <0xa0000 0x1000>;
		interrupts = <77 0>, <78 0>, <79 0>, <80 0>,
			<81 0>, <82 0>, <83 0>, <84 0>,
			<85 0>, <86 0>, <87 0>, <88 0>,
			<89 0>, <90 0>, <91 0>, <92 0>;
		no-error-irq;
		status = "disabled";
	};

	fmu: flash-controller@43000 {
		compatible = "nxp,msf1";
		reg = <0x43000 0x1000>;
		interrupts = <138 0>;
		status = "disabled";

		#address-cells = <1>;
		#size-cells = <1>;

		flash: flash@0 {
			compatible = "soc-nv-flash";
			reg = <0 DT_SIZE_M(1)>;
			erase-block-size = <8192>;
			/* MCXN23x ROM Flash API supports writing of 128B pages. */
			write-block-size = <128>;
		};
	};

	os_timer: timers@49000 {
		compatible = "nxp,os-timer";
		reg = <0x49000 0x1000>;
		interrupts = <57 0>;
		status = "disabled";
	};

	wwdt0: watchdog@16000 {
		compatible = "nxp,lpc-wwdt";
		reg = <0x16000 0x1000>;
		interrupts = <152 0>;
		status = "disabled";
		clk-divider = <1>;
	};

	flexpwm0: flexpwm@ce000 {
		compatible = "nxp,flexpwm";
		reg = <0xce000 0x1000>;
		interrupt-names = "RELOAD-ERROR", "FAULT";
		interrupts = <112 0>, <113 0>;
		flexpwm0_pwm0: pwm0 {
			compatible = "nxp,imx-pwm";
			index = <0>;
			interrupts = <114 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm0_pwm1: pwm1 {
			compatible = "nxp,imx-pwm";
			index = <1>;
			interrupts = <115 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm0_pwm2: pwm2 {
			compatible = "nxp,imx-pwm";
			index = <2>;
			interrupts = <116 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm0_pwm3: pwm3 {
			compatible = "nxp,imx-pwm";
			index = <3>;
			interrupts = <117 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};
	};

	flexpwm1: flexpwm@d0000 {
		compatible = "nxp,flexpwm";
		reg = <0xd0000 0x1000>;
		interrupt-names = "RELOAD-ERROR", "FAULT";
		interrupts = <118 0>, <119 0>;
		flexpwm1_pwm0: pwm0 {
			compatible = "nxp,imx-pwm";
			index = <0>;
			interrupts = <120 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm1_pwm1: pwm1 {
			compatible = "nxp,imx-pwm";
			index = <1>;
			interrupts = <121 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm1_pwm2: pwm2 {
			compatible = "nxp,imx-pwm";
			index = <2>;
			interrupts = <122 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};

		flexpwm1_pwm3: pwm3 {
			compatible = "nxp,imx-pwm";
			index = <3>;
			interrupts = <123 0>;
			#pwm-cells = <3>;
			clocks = <&syscon MCUX_BUS_CLK>;
			nxp,prescaler = <128>;
			status = "disabled";
			run-in-wait;
		};
	};

	ctimer0: ctimer@c000 {
		compatible = "nxp,lpc-ctimer";
		reg = <0xc000 0x1000>;
		interrupts = <31 0>;
		status = "disabled";
		clk-source = <1>;
		clocks = <&syscon MCUX_CTIMER0_CLK>;
		mode = <0>;
		input = <0>;
		prescale = <0>;
	};

	ctimer1: ctimer@d000 {
		compatible = "nxp,lpc-ctimer";
		reg = <0xd000 0x1000>;
		interrupts = <32 0>;
		status = "disabled";
		clk-source = <1>;
		clocks = <&syscon MCUX_CTIMER1_CLK>;
		mode = <0>;
		input = <0>;
		prescale = <0>;
	};

	ctimer2: ctimer@e000 {
		compatible = "nxp,lpc-ctimer";
		reg = <0xe000 0x1000>;
		interrupts = <34 0>;
		status = "disabled";
		clk-source = <1>;
		clocks = <&syscon MCUX_CTIMER2_CLK>;
		mode = <0>;
		input = <0>;
		prescale = <0>;
	};

	ctimer3: ctimer@f000 {
		compatible = "nxp,lpc-ctimer";
		reg = <0xf000 0x1000>;
		interrupts = <55 0>;
		status = "disabled";
		clk-source = <1>;
		clocks = <&syscon MCUX_CTIMER3_CLK>;
		mode = <0>;
		input = <0>;
		prescale = <0>;
	};

	ctimer4: ctimer@10000 {
		compatible = "nxp,lpc-ctimer";
		reg = <0x10000 0x1000>;
		interrupts = <56 0>;
		status = "disabled";
		clk-source = <1>;
		clocks = <&syscon MCUX_CTIMER4_CLK>;
		mode = <0>;
		input = <0>;
		prescale = <0>;
	};

	vref: vref@111000 {
		compatible = "nxp,vref";
		regulator-name = "mcxn23x-vref";
		reg = <0x111000 0x14>;
		status = "disabled";
		#nxp,reference-cells = <1>;
		nxp,buffer-startup-delay-us = <400>;
		nxp,bandgap-startup-time-us = <20>;
		regulator-min-microvolt = <1000000>;
		regulator-max-microvolt = <2100000>;
	};

	lpadc0: lpadc@10d000 {
		compatible = "nxp,lpc-lpadc";
		reg = <0x10d000 0x1000>;
		interrupts = <45 0>;
		status = "disabled";
		clk-divider = <1>;
		clk-source = <0>;
		voltage-ref= <1>;
		calibration-average = <128>;
		power-level = <0>;
		offset-value-a = <0>;
		offset-value-b = <0>;
		#io-channel-cells = <1>;
		clocks = <&syscon MCUX_LPADC1_CLK>;
		nxp,references = <&vref 1800>;
	};

	lpadc1: lpadc@10e000 {
		compatible = "nxp,lpc-lpadc";
		reg = <0x10e000 0x1000>;
		interrupts = <46 0>;
		status = "disabled";
		clk-divider = <1>;
		clk-source = <0>;
		voltage-ref= <0>;
		calibration-average = <128>;
		power-level = <1>;
		offset-value-a = <0>;
		offset-value-b = <0>;
		#io-channel-cells = <1>;
		clocks = <&syscon MCUX_LPADC2_CLK>;
	};

	usb1: usbd@10b000 {
		compatible = "nxp,ehci";
		reg = <0x10b000 0x1000>;
		interrupts = <67 0>;
		interrupt-names = "usb_otg";
		num-bidir-endpoints = <8>;
		status = "disabled";
	};

	lpcmp0: lpcmp@51000 {
		compatible = "nxp,lpcmp";
		reg = <0x51000 0x1000>;
		interrupts = <109 0>;
		status = "disabled";
		#io-channel-cells = <2>;
	};

	lpcmp1: lpcmp@52000 {
		compatible = "nxp,lpcmp";
		reg = <0x52000 0x1000>;
		interrupts = <110 0>;
		status = "disabled";
		#io-channel-cells = <2>;
	};

	flexcan0: can@d4000 {
		compatible = "nxp,flexcan";
		reg = <0xd4000 0x4000>;
		interrupts = <62 0>;
		interrupt-names = "common";
		clocks = <&syscon MCUX_FLEXCAN0_CLK>;
		clk-source = <0>;
		status = "disabled";
	};

	flexcan1: can@d8000 {
		compatible = "nxp,flexcan";
		reg = <0xd8000 0x4000>;
		interrupts = <63 0>;
		interrupt-names = "common";
		clocks = <&syscon MCUX_FLEXCAN1_CLK>;
		clk-source = <0>;
		status = "disabled";
	};

	flexio0: flexio@105000 {
		compatible = "nxp,flexio";
		reg = <0x105000 0x1000>;
		status = "disabled";
		interrupts = <105 0>;
		clocks = <&syscon MCUX_FLEXIO0_CLK>;
		flexio0_lcd: flexio0-lcd {
			compatible = "nxp,mipi-dbi-flexio-lcdif";
			status = "disabled";
		};
	};

	lptmr0: lptmr@4a000 {
		compatible = "nxp,lptmr";
		reg = <0x4a000 0x1000>;
		interrupts = <143 0>;
		clock-frequency = <16000>;
		prescaler = <1>;
		clk-source = <1>;
		resolution = <32>;
	};

	lptmr1: lptmr@4b000 {
		compatible = "nxp,lptmr";
		reg = <0x4b000 0x1000>;
		interrupts = <144 0>;
		clock-frequency = <16000>;
		prescaler = <1>;
		clk-source = <1>;
		resolution = <32>;
	};

	mrt0: mrt@13000 {
		compatible = "nxp,mrt";
		reg = <0x13000 0x1000>;
		interrupts = <30 0>;
		num-channels = <4>;
		num-bits = <24>;
		clocks = <&syscon MCUX_MRT_CLK>;
		resets = <&reset NXP_SYSCON_RESET(1, 0)>;
		#address-cells = <1>;
		#size-cells = <0>;

		mrt0_channel0: mrt0_channel@0 {
			compatible = "nxp,mrt-channel";
			reg = <0>;
			status = "disabled";
		};
		mrt0_channel1: mrt0_channel@1 {
			compatible = "nxp,mrt-channel";
			reg = <1>;
			status = "disabled";
		};
		mrt0_channel2: mrt0_channel@2 {
			compatible = "nxp,mrt-channel";
			reg = <2>;
			status = "disabled";
		};
		mrt0_channel3: mrt0_channel@3 {
			compatible = "nxp,mrt-channel";
			reg = <3>;
			status = "disabled";
		};
	};

	rtc: rtc@4c000 {
		compatible = "nxp,irtc";
		reg = <0x4c000 0x1000>;
		status = "disabled";
		interrupts = <52 0>;
		prescaler = <1>;
		clock-frequency = <16384>;
		clock-src = <0>;
		alarms-count = <1>;
	};
};

&systick {
	/*
	 * MCXN23X relies by default on the OS Timer for system clock
	 * implementation, so the SysTick node is not to be enabled.
	 */
	status = "disabled";
};

&nvic {
	arm,num-irq-priority-bits = <3>;
};