/*
 * Copyright 2024 NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <arm/armv7-m.dtsi>
#include <zephyr/dt-bindings/clock/imx95_clock.h>
#include <dt-bindings/i2c/i2c.h>
#include <mem.h>

/ {
	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-m7";
			reg = <0>;

			#address-cells = <1>;
			#size-cells = <1>;

			mpu: mpu@e000ed90 {
				compatible = "arm,armv7m-mpu";
				reg = <0xe000ed90 0x40>;
			};
		};
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;

		scmi_shmem0: memory@44611000 {
			compatible = "arm,scmi-shmem";
			reg = <0x44611000 0x80>;
		};
	};

	firmware {
		scmi {
			compatible = "arm,scmi";
			shmem = <&scmi_shmem0>;
			mboxes = <&mu5 0>;
			mbox-names = "tx";

			#address-cells = <1>;
			#size-cells = <0>;

			scmi_clk: protocol@14 {
				compatible = "arm,scmi-clock";
				reg = <0x14>;
				#clock-cells = <1>;
			};

			scmi_iomuxc: protocol@19 {
				compatible = "arm,scmi-pinctrl";
				reg = <0x19>;

				pinctrl: pinctrl {
					compatible = "nxp,imx95-pinctrl", "nxp,imx93-pinctrl";
				};
			};
		};
	};

	soc {
		itcm: itcm@0 {
			compatible = "nxp,imx-itcm";
			reg = <0x0 DT_SIZE_K(256)>;
		};

		dtcm: dtcm@20000000 {
			compatible = "nxp,imx-dtcm";
			reg = <0x20000000 DT_SIZE_K(256)>;
		};

		edma2: dma@42000000 {
			compatible = "nxp,edma";
			reg = <0x42000000 (DT_SIZE_K(64) * 33)>;
			valid-channels = <30>, <31>;
			interrupts = <143 0>, <143 0>;
			#dma-cells = <2>;
			status = "disabled";
		};

		tpm3: pwm@424e0000 {
			compatible = "nxp,kinetis-tpm";
			reg = <0x424e0000 0x88>;
			interrupts = <73 0>;
			clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>;
			prescaler = <16>;
			status = "disabled";
			#pwm-cells = <3>;
		};

		tpm4: pwm@424f0000 {
			compatible = "nxp,kinetis-tpm";
			reg = <0x424f0000 0x88>;
			interrupts = <74 0>;
			clocks = <&scmi_clk IMX95_CLK_TPM4>;
			prescaler = <16>;
			status = "disabled";
			#pwm-cells = <3>;
		};

		tpm5: pwm@42500000 {
			compatible = "nxp,kinetis-tpm";
			reg = <0x42500000 0x88>;
			interrupts = <75 0>;
			clocks = <&scmi_clk IMX95_CLK_TPM5>;
			prescaler = <16>;
			status = "disabled";
			#pwm-cells = <3>;
		};

		tpm6: pwm@42510000 {
			compatible = "nxp,kinetis-tpm";
			reg = <0x42510000 0x88>;
			interrupts = <76 0>;
			clocks = <&scmi_clk IMX95_CLK_TPM6>;
			prescaler = <16>;
			status = "disabled";
			#pwm-cells = <3>;
		};

		lpi2c3: i2c@42530000 {
			compatible = "nxp,lpi2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x42530000 0x4000>;
			interrupts = <58 0>;
			clocks = <&scmi_clk IMX95_CLK_LPI2C3>;
			status = "disabled";
		};

		lpi2c4: i2c@42540000 {
			compatible = "nxp,lpi2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x42540000 0x4000>;
			interrupts = <59 0>;
			clocks = <&scmi_clk IMX95_CLK_LPI2C4>;
			status = "disabled";
		};

		lpuart3: serial@42570000 {
			compatible = "nxp,imx-lpuart", "nxp,lpuart";
			reg = <0x42570000 DT_SIZE_K(64)>;
			interrupts = <64 3>;
			clocks = <&scmi_clk IMX95_CLK_LPUART3>;
			status = "disabled";
		};

		lpuart4: serial@42580000 {
			compatible = "nxp,imx-lpuart", "nxp,lpuart";
			reg = <0x42580000 DT_SIZE_K(64)>;
			interrupts = <65 3>;
			clocks = <&scmi_clk IMX95_CLK_LPUART4>;
			status = "disabled";
		};

		lpuart5: serial@42590000 {
			compatible = "nxp,imx-lpuart", "nxp,lpuart";
			reg = <0x42590000 DT_SIZE_K(64)>;
			interrupts = <66 3>;
			clocks = <&scmi_clk IMX95_CLK_LPUART5>;
			status = "disabled";
		};

		lpuart6: serial@425a0000 {
			compatible = "nxp,imx-lpuart", "nxp,lpuart";
			reg = <0x425a0000 DT_SIZE_K(64)>;
			interrupts = <67 3>;
			clocks = <&scmi_clk IMX95_CLK_LPUART6>;
			status = "disabled";
		};

		sai3: dai@42650000 {
			compatible = "nxp,dai-sai";
			reg = <0x42650000 DT_SIZE_K(64)>;
			clocks = <&scmi_clk IMX95_CLK_SAI3>;
			clock-names = "mclk1";
			interrupts = <170 0>;
			dai-index = <3>;
			mclk-is-output;
			dmas = <&edma2 30 60>, <&edma2 31 61>;
			dma-names = "tx", "rx";
			status = "disabled";
		};

		lpuart7: serial@42690000 {
			compatible = "nxp,imx-lpuart", "nxp,lpuart";
			reg = <0x42690000 DT_SIZE_K(64)>;
			interrupts = <68 3>;
			clocks = <&scmi_clk IMX95_CLK_LPUART7>;
			status = "disabled";
		};

		lpuart8: serial@426a0000 {
			compatible = "nxp,imx-lpuart", "nxp,lpuart";
			reg = <0x426a0000 DT_SIZE_K(64)>;
			interrupts = <69 3>;
			clocks = <&scmi_clk IMX95_CLK_LPUART8>;
			status = "disabled";
		};

		lpi2c5: i2c@426b0000 {
			compatible = "nxp,lpi2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x426b0000 0x4000>;
			interrupts = <181 0>;
			clocks = <&scmi_clk IMX95_CLK_LPI2C5>;
			status = "disabled";
		};

		lpi2c6: i2c@426c0000 {
			compatible = "nxp,lpi2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x426c0000 0x4000>;
			interrupts = <182 0>;
			clocks = <&scmi_clk IMX95_CLK_LPI2C6>;
			status = "disabled";
		};

		lpi2c7: i2c@426d0000 {
			compatible = "nxp,lpi2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x426d0000 0x4000>;
			interrupts = <183 0>;
			clocks = <&scmi_clk IMX95_CLK_LPI2C7>;
			status = "disabled";
		};

		lpi2c8: i2c@426e0000 {
			compatible = "nxp,lpi2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x426e0000 0x4000>;
			interrupts = <184 0>;
			clocks = <&scmi_clk IMX95_CLK_LPI2C8>;
			status = "disabled";
		};

		tpm1: pwm@44310000 {
			compatible = "nxp,kinetis-tpm";
			reg = <0x44310000 0x88>;
			interrupts = <29 0>;
			clocks = <&scmi_clk IMX95_CLK_BUSAON>;
			prescaler = <16>;
			status = "disabled";
			#pwm-cells = <3>;
		};

		tpm2: pwm@44320000 {
			compatible = "nxp,kinetis-tpm";
			reg = <0x44320000 0x88>;
			interrupts = <30 0>;
			clocks = <&scmi_clk IMX95_CLK_TPM2>;
			prescaler = <16>;
			status = "disabled";
			#pwm-cells = <3>;
		};

		lpi2c1: i2c@44340000 {
			compatible = "nxp,lpi2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x44340000 0x4000>;
			interrupts = <13 0>;
			clocks = <&scmi_clk IMX95_CLK_LPI2C1>;
			status = "disabled";
		};

		lpi2c2: i2c@44350000 {
			compatible = "nxp,lpi2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x44350000 0x4000>;
			interrupts = <14 0>;
			clocks = <&scmi_clk IMX95_CLK_LPI2C2>;
			status = "disabled";
		};

		lpuart1: serial@44380000 {
			compatible = "nxp,imx-lpuart", "nxp,lpuart";
			reg = <0x44380000 DT_SIZE_K(64)>;
			interrupts = <19 3>;
			clocks = <&scmi_clk IMX95_CLK_LPUART1>;
			status = "disabled";
		};

		lpuart2: serial@44390000 {
			compatible = "nxp,imx-lpuart", "nxp,lpuart";
			reg = <0x44390000 DT_SIZE_K(64)>;
			interrupts = <20 3>;
			clocks = <&scmi_clk IMX95_CLK_LPUART2>;
			status = "disabled";
		};

		mu5: mailbox@44610000 {
			compatible = "nxp,mbox-imx-mu";
			reg = <0x44610000 DT_SIZE_K(4)>;
			interrupts = <205 0>;
			#mbox-cells = <1>;
		};
	};
};

&nvic {
	arm,num-irq-priority-bits = <4>;
};