/* * Copyright (c) 2021-2023 IoT.bzh * * SPDX-License-Identifier: Apache-2.0 * */ #define DT_DRV_COMPAT renesas_rcar_pfc #include "pfc_rcar.h" #include #include #include #include #include #include #define PFC_RCAR_PMMR 0x0 /* Gen3 only has one base address, Gen4 has one per GPIO controller */ #if defined(CONFIG_SOC_SERIES_RCAR_GEN3) #define PFC_RCAR_GPSR 0x100 #define PFC_RCAR_IPSR 0x200 #elif defined(CONFIG_SOC_SERIES_RCAR_GEN4) #define PFC_RCAR_GPSR 0x040 #define PFC_RCAR_IPSR 0x060 #else #error Unsupported SoC Series #endif /* swap both arguments */ #define PFC_REG_ADDRESS(idx, inst) DT_INST_REG_ADDR_BY_IDX(inst, idx) static uintptr_t reg_base[] = { LISTIFY(DT_NUM_REGS(DT_DRV_INST(0)), PFC_REG_ADDRESS, (,), 0) }; #define PFC_REG_SIZE(idx, inst) DT_INST_REG_SIZE_BY_IDX(inst, idx) static const uintptr_t __maybe_unused reg_sizes[] = { LISTIFY(DT_NUM_REGS(DT_DRV_INST(0)), PFC_REG_SIZE, (,), 0) }; #ifdef CONFIG_PINCTRL_RCAR_VOLTAGE_CONTROL /* POC Control Register can control IO voltage level that is supplied to the pin */ struct pfc_pocctrl_reg { uint32_t offset; const uint16_t pins[32]; }; #endif /* CONFIG_PINCTRL_RCAR_VOLTAGE_CONTROL */ /* * Each drive step is either encoded in 2 or 3 bits. * So based on a 24 mA maximum value each step is either * 24/4 mA or 24/8 mA. */ #define PFC_RCAR_DRIVE_MAX 24U #define PFC_RCAR_DRIVE_STEP(size) \ (size == 2 ? PFC_RCAR_DRIVE_MAX / 4 : PFC_RCAR_DRIVE_MAX / 8) /* Some registers such as IPSR GPSR or DRVCTRL are protected and * must be preceded to a write to PMMR with the inverse value. */ static void pfc_rcar_write(uintptr_t pfc_base, uint32_t offs, uint32_t val) { sys_write32(~val, pfc_base + PFC_RCAR_PMMR); sys_write32(val, pfc_base + offs); } /* Set the pin either in gpio or peripheral */ static void pfc_rcar_set_gpsr(uintptr_t pfc_base, uint16_t pin, bool peripheral) { #if defined(CONFIG_SOC_SERIES_RCAR_GEN3) /* On Gen3 we have multiple GPSR at one base address */ uint8_t bank = pin / 32; #elif defined(CONFIG_SOC_SERIES_RCAR_GEN4) /* On Gen4 we have one GPSR at multiple base address */ uint8_t bank = 0; #endif uint8_t bit = pin % 32; uint32_t val = sys_read32(pfc_base + PFC_RCAR_GPSR + bank * sizeof(uint32_t)); if (peripheral) { val |= BIT(bit); } else { val &= ~BIT(bit); } pfc_rcar_write(pfc_base, PFC_RCAR_GPSR + bank * sizeof(uint32_t), val); } /* Set peripheral function */ static void pfc_rcar_set_ipsr(uintptr_t pfc_base, const struct rcar_pin_func *rcar_func) { uint16_t reg_offs = PFC_RCAR_IPSR + rcar_func->bank * sizeof(uint32_t); uint32_t val = sys_read32(pfc_base + reg_offs); val &= ~(0xFU << rcar_func->shift); val |= (rcar_func->func << rcar_func->shift); pfc_rcar_write(pfc_base, reg_offs, val); } static uint32_t pfc_rcar_get_drive_reg(uint16_t pin, uint8_t *offset, uint8_t *size) { const struct pfc_drive_reg *drive_regs = pfc_rcar_get_drive_regs(); while (drive_regs->reg != 0U) { for (size_t i = 0U; i < ARRAY_SIZE(drive_regs->fields); i++) { if (drive_regs->fields[i].pin == pin) { *offset = drive_regs->fields[i].offset; *size = drive_regs->fields[i].size; return drive_regs->reg; } } drive_regs++; } return 0; } /* * Maximum drive strength is 24mA. This value can be lowered * using DRVCTRLx registers, some pins have 8 steps (3 bits size encoded) * some have 4 steps (2 bits size encoded). */ static int pfc_rcar_set_drive_strength(uintptr_t pfc_base, uint16_t pin, uint8_t strength) { uint8_t offset, size, step; uint32_t reg, val; reg = pfc_rcar_get_drive_reg(pin, &offset, &size); if (reg == 0U) { return -EINVAL; } step = PFC_RCAR_DRIVE_STEP(size); if ((strength < step) || (strength > PFC_RCAR_DRIVE_MAX)) { return -EINVAL; } /* Convert the value from mA based on a full drive strength * value of 24mA. */ strength = (strength / step) - 1U; /* clear previous drive strength value */ val = sys_read32(pfc_base + reg); val &= ~GENMASK(offset + size - 1U, offset); val |= strength << offset; pfc_rcar_write(pfc_base, reg, val); return 0; } static const struct pfc_bias_reg *pfc_rcar_get_bias_reg(uint16_t pin, uint8_t *bit) { const struct pfc_bias_reg *bias_regs = pfc_rcar_get_bias_regs(); /* Loop around all the registers to find the bit for a given pin */ while (bias_regs->puen && bias_regs->pud) { for (size_t i = 0U; i < ARRAY_SIZE(bias_regs->pins); i++) { if (bias_regs->pins[i] == pin) { *bit = i; return bias_regs; } } bias_regs++; } return NULL; } int pfc_rcar_set_bias(uintptr_t pfc_base, uint16_t pin, uint16_t flags) { uint32_t val; uint8_t bit; const struct pfc_bias_reg *bias_reg = pfc_rcar_get_bias_reg(pin, &bit); if (bias_reg == NULL) { return -EINVAL; } /* pull enable/disable*/ val = sys_read32(pfc_base + bias_reg->puen); if ((flags & RCAR_PIN_FLAGS_PUEN) == 0U) { sys_write32(val & ~BIT(bit), pfc_base + bias_reg->puen); return 0; } sys_write32(val | BIT(bit), pfc_base + bias_reg->puen); /* pull - up/down */ val = sys_read32(pfc_base + bias_reg->pud); if (flags & RCAR_PIN_FLAGS_PUD) { sys_write32(val | BIT(bit), pfc_base + bias_reg->pud); } else { sys_write32(val & ~BIT(bit), pfc_base + bias_reg->pud); } return 0; } #ifdef CONFIG_PINCTRL_RCAR_VOLTAGE_CONTROL const struct pfc_pocctrl_reg pfc_r8a77951_r8a77961_volt_regs[] = { { .offset = 0x0380, .pins = { [0] = RCAR_GP_PIN(3, 0), /* SD0_CLK */ [1] = RCAR_GP_PIN(3, 1), /* SD0_CMD */ [2] = RCAR_GP_PIN(3, 2), /* SD0_DAT0 */ [3] = RCAR_GP_PIN(3, 3), /* SD0_DAT1 */ [4] = RCAR_GP_PIN(3, 4), /* SD0_DAT2 */ [5] = RCAR_GP_PIN(3, 5), /* SD0_DAT3 */ [6] = RCAR_GP_PIN(3, 6), /* SD1_CLK */ [7] = RCAR_GP_PIN(3, 7), /* SD1_CMD */ [8] = RCAR_GP_PIN(3, 8), /* SD1_DAT0 */ [9] = RCAR_GP_PIN(3, 9), /* SD1_DAT1 */ [10] = RCAR_GP_PIN(3, 10), /* SD1_DAT2 */ [11] = RCAR_GP_PIN(3, 11), /* SD1_DAT3 */ [12] = RCAR_GP_PIN(4, 0), /* SD2_CLK */ [13] = RCAR_GP_PIN(4, 1), /* SD2_CMD */ [14] = RCAR_GP_PIN(4, 2), /* SD2_DAT0 */ [15] = RCAR_GP_PIN(4, 3), /* SD2_DAT1 */ [16] = RCAR_GP_PIN(4, 4), /* SD2_DAT2 */ [17] = RCAR_GP_PIN(4, 5), /* SD2_DAT3 */ [18] = RCAR_GP_PIN(4, 6), /* SD2_DS */ [19] = RCAR_GP_PIN(4, 7), /* SD3_CLK */ [20] = RCAR_GP_PIN(4, 8), /* SD3_CMD */ [21] = RCAR_GP_PIN(4, 9), /* SD3_DAT0 */ [22] = RCAR_GP_PIN(4, 10), /* SD3_DAT1 */ [23] = RCAR_GP_PIN(4, 11), /* SD3_DAT2 */ [24] = RCAR_GP_PIN(4, 12), /* SD3_DAT3 */ [25] = RCAR_GP_PIN(4, 13), /* SD3_DAT4 */ [26] = RCAR_GP_PIN(4, 14), /* SD3_DAT5 */ [27] = RCAR_GP_PIN(4, 15), /* SD3_DAT6 */ [28] = RCAR_GP_PIN(4, 16), /* SD3_DAT7 */ [29] = RCAR_GP_PIN(4, 17), /* SD3_DS */ [30] = -1, [31] = -1, } }, { /* sentinel */ }, }; static const struct pfc_pocctrl_reg *pfc_rcar_get_io_voltage_regs(void) { return pfc_r8a77951_r8a77961_volt_regs; } static const struct pfc_pocctrl_reg *pfc_rcar_get_pocctrl_reg(uint16_t pin, uint8_t *bit) { const struct pfc_pocctrl_reg *voltage_regs = pfc_rcar_get_io_voltage_regs(); BUILD_ASSERT(ARRAY_SIZE(voltage_regs->pins) < UINT8_MAX); /* Loop around all the registers to find the bit for a given pin */ while (voltage_regs && voltage_regs->offset) { uint8_t i; for (i = 0U; i < ARRAY_SIZE(voltage_regs->pins); i++) { if (voltage_regs->pins[i] == pin) { *bit = i; return voltage_regs; } } voltage_regs++; } return NULL; } static void pfc_rcar_set_voltage(uintptr_t pfc_base, uint16_t pin, uint16_t voltage) { uint32_t val; uint8_t bit; const struct pfc_pocctrl_reg *voltage_reg; voltage_reg = pfc_rcar_get_pocctrl_reg(pin, &bit); if (!voltage_reg) { return; } val = sys_read32(pfc_base + voltage_reg->offset); switch (voltage) { case PIN_VOLTAGE_1P8V: if (!(val & BIT(bit))) { return; } val &= ~BIT(bit); break; case PIN_VOLTAGE_3P3V: if (val & BIT(bit)) { return; } val |= BIT(bit); break; default: break; } pfc_rcar_write(pfc_base, voltage_reg->offset, val); } #endif /* CONFIG_PINCTRL_RCAR_VOLTAGE_CONTROL */ int pinctrl_configure_pin(const pinctrl_soc_pin_t *pin) { int ret = 0; uint8_t reg_index; uintptr_t pfc_base; ret = pfc_rcar_get_reg_index(pin->pin, ®_index); if (ret) { return ret; } if (reg_index >= ARRAY_SIZE(reg_base)) { return -EINVAL; } pfc_base = reg_base[reg_index]; /* Set pin as GPIO if capable */ if (RCAR_IS_GP_PIN(pin->pin)) { pfc_rcar_set_gpsr(pfc_base, pin->pin, false); } else if ((pin->flags & RCAR_PIN_FLAGS_FUNC_SET) == 0U) { /* A function must be set for non GPIO capable pin */ return -EINVAL; } #ifdef CONFIG_PINCTRL_RCAR_VOLTAGE_CONTROL if (pin->voltage != PIN_VOLTAGE_NONE) { pfc_rcar_set_voltage(pfc_base, pin->pin, pin->voltage); } #endif /* Select function for pin */ if ((pin->flags & RCAR_PIN_FLAGS_FUNC_SET) != 0U) { if ((pin->flags & RCAR_PIN_FLAGS_FUNC_DUMMY) == 0U) { pfc_rcar_set_ipsr(pfc_base, &pin->func); } if (RCAR_IS_GP_PIN(pin->pin)) { pfc_rcar_set_gpsr(pfc_base, pin->pin, true); } if ((pin->flags & RCAR_PIN_FLAGS_PULL_SET) != 0U) { ret = pfc_rcar_set_bias(pfc_base, pin->pin, pin->flags); if (ret < 0) { return ret; } } } if (pin->drive_strength != 0U) { ret = pfc_rcar_set_drive_strength(pfc_base, pin->pin, pin->drive_strength); } return ret; } int pinctrl_configure_pins(const pinctrl_soc_pin_t *pins, uint8_t pin_cnt, uintptr_t reg) { int ret = 0; ARG_UNUSED(reg); while (pin_cnt-- > 0U) { ret = pinctrl_configure_pin(pins++); if (ret < 0) { break; } } return ret; } #if defined(DEVICE_MMIO_IS_IN_RAM) __boot_func static int pfc_rcar_driver_init(void) { for (unsigned int i = 0; i < ARRAY_SIZE(reg_base); i++) { device_map(reg_base + i, reg_base[i], reg_sizes[i], K_MEM_CACHE_NONE); } return 0; } SYS_INIT(pfc_rcar_driver_init, PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT); #endif