/*
 * Copyright(c) 2024 John Sanpe <sanpeqf@gmail.com>
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;
#include <st/h7/stm32h750Xb.dtsi>
#include <st/h7/stm32h750vbtx-pinctrl.dtsi>
#include <zephyr/dt-bindings/input/input-event-codes.h>

/ {
	model = "VCC-GND Studio STM32H750VB";
	compatible = "st,stm32h750vb";

	aliases {
		led0 = &yellow_led;
		led1 = &blue_led;
		sw0 = &user_button;
		spi-flash0 = &w25q128jv;
	};

	chosen {
		zephyr,console = &usart1;
		zephyr,shell-uart = &usart1;
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
		zephyr,flash-controller = &w25q128jv;
	};

	leds {
		compatible = "gpio-leds";
		red_led: led_1 {
			gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>;
			label = "LED1";
			status = "disabled";
		};
		green_led: led_2 {
			gpios = <&gpioa 14 GPIO_ACTIVE_HIGH>;
			label = "LED2";
			status = "disabled";
		};
		yellow_led: led_3 {
			gpios = <&gpioa 15 GPIO_ACTIVE_HIGH>;
			label = "LED3";
		};
		blue_led: led_4 {
			gpios = <&gpiob 4 GPIO_ACTIVE_HIGH>;
			label = "LED4";
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		user_button: button {
			gpios = <&gpiob 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
			zephyr,code = <INPUT_KEY_0>;
			label = "USR";
		};
	};
};

&clk_hse {
	clock-frequency = <DT_FREQ_M(25)>;
	status = "okay";
};

&clk_lse {
	status = "okay";
};

&pll {
	div-m = <5>;
	mul-n = <192>;
	div-p = <2>;
	div-q = <4>;
	div-r = <4>;
	clocks = <&clk_hse>;
	status = "okay";
};

&rcc {
	clocks = <&pll>;
	clock-frequency = <DT_FREQ_M(480)>;
	d1cpre = <1>;
	hpre = <2>;
	d1ppre = <2>;
	d2ppre1 = <2>;
	d2ppre2 = <2>;
	d3ppre = <2>;
};

&usart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pa10>;
	current-speed = <115200>;
	status = "okay";
};

&sdmmc1 {
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc1_d0_pc8 &sdmmc1_d1_pc9
		     &sdmmc1_d2_pc10 &sdmmc1_d3_pc11
		     &sdmmc1_ck_pc12 &sdmmc1_cmd_pd2>;
	cd-gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&quadspi {
	pinctrl-names = "default";
	pinctrl-0 = <&quadspi_clk_pb2 &quadspi_bk1_ncs_pb10
		     &quadspi_bk1_io0_pd11 &quadspi_bk1_io1_pd12
		     &quadspi_bk1_io2_pe2 &quadspi_bk1_io3_pd13>;
	status = "okay";

	w25q128jv: qspi-nor-flash@90000000 {
		compatible = "st,stm32-qspi-nor";
		reg = <0x90000000 DT_SIZE_M(16)>;
		qspi-max-frequency = <80000000>;
		spi-bus-width = <4>;
		status = "okay";

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			storage_partition: partition@0 {
				label = "storage";
				reg = <0x0 DT_SIZE_M(16)>;
			};
		};
	};
};