/* * Copyright (c) 2024 Andrew Featherstone * * SPDX-License-Identifier: Apache-2.0 */ #include #include #include #include "rpi_pico2-pinctrl.dtsi" #include "../common/rpi_pico-led.dtsi" / { chosen { zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,console = &uart0; zephyr,shell-uart = &uart0; zephyr,code-partition = &code_partition; }; aliases { watchdog0 = &wdt0; }; pico_header: connector { compatible = "raspberrypi,pico-header"; #gpio-cells = <2>; gpio-map-mask = <0xffffffff 0xffffffc0>; gpio-map-pass-thru = <0 0x3f>; gpio-map = <0 0 &gpio0 0 0>, /* GP0 */ <1 0 &gpio0 1 0>, /* GP1 */ <2 0 &gpio0 2 0>, /* GP2 */ <3 0 &gpio0 3 0>, /* GP3 */ <4 0 &gpio0 4 0>, /* GP4 */ <5 0 &gpio0 5 0>, /* GP5 */ <6 0 &gpio0 6 0>, /* GP6 */ <7 0 &gpio0 7 0>, /* GP7 */ <8 0 &gpio0 8 0>, /* GP8 */ <9 0 &gpio0 9 0>, /* GP9 */ <10 0 &gpio0 10 0>, /* GP10 */ <11 0 &gpio0 11 0>, /* GP11 */ <12 0 &gpio0 12 0>, /* GP12 */ <13 0 &gpio0 13 0>, /* GP13 */ <14 0 &gpio0 14 0>, /* GP14 */ <15 0 &gpio0 15 0>, /* GP15 */ <16 0 &gpio0 16 0>, /* GP16 */ <17 0 &gpio0 17 0>, /* GP17 */ <18 0 &gpio0 18 0>, /* GP18 */ <19 0 &gpio0 19 0>, /* GP19 */ <20 0 &gpio0 20 0>, /* GP20 */ <21 0 &gpio0 21 0>, /* GP21 */ <22 0 &gpio0 22 0>, /* GP22 */ <26 0 &gpio0 26 0>, /* GP26 */ <27 0 &gpio0 27 0>, /* GP27 */ <28 0 &gpio0 28 0>; /* GP28 */ }; }; &flash0 { reg = <0x10000000 DT_SIZE_M(4)>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; /* Reserved memory for an image definition block. The block is much * smaller than 256 bytes, but in practice the linker places the vector * table at a much larger alignment offset. */ image_def: partition@0 { label = "image_def"; reg = <0x00000000 0x100>; read-only; }; /* * Usable flash. Starts at 0x100, after the image definition block. * The partition size is 4MB minus the 0x100 bytes taken by the * image definition. */ code_partition: partition@100 { label = "code-partition"; reg = <0x100 (DT_SIZE_M(4) - 0x100)>; read-only; }; }; }; &uart0 { current-speed = <115200>; status = "okay"; pinctrl-0 = <&uart0_default>; pinctrl-names = "default"; }; &gpio0 { status = "okay"; }; &spi0 { clock-frequency = ; pinctrl-0 = <&spi0_default>; pinctrl-names = "default"; }; &i2c0 { clock-frequency = ; pinctrl-0 = <&i2c0_default>; pinctrl-names = "default"; status = "okay"; }; &i2c1 { clock-frequency = ; pinctrl-0 = <&i2c1_default>; pinctrl-names = "default"; status = "okay"; }; &adc { pinctrl-0 = <&adc_default>; pinctrl-names = "default"; status = "okay"; }; &pwm { pinctrl-0 = <&pwm_ch4b_default>; pinctrl-names = "default"; divider-int-0 = <255>; }; &timer0 { status = "okay"; }; zephyr_udc0: &usbd { status = "okay"; }; pico_serial: &uart0 {};