/*
 * Copyright 2024 NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;

#include <nxp/nxp_ke17z512.dtsi>
#include "frdm_ke17z512-pinctrl.dtsi"
#include <zephyr/dt-bindings/input/input-event-codes.h>
#include <zephyr/dt-bindings/pwm/pwm.h>

/ {
	model = "NXP Freedom KE17Z512 board";
	compatible = "nxp,ke17z512", "nxp,mke17z9", "nxp,ke1xz";

	chosen {
		zephyr,sram = &sram_u;
		zephyr,flash = &flash0;
		zephyr,code-partition = &slot0_partition;
		zephyr,uart-mcumgr = &lpuart2;
		zephyr,console = &lpuart2;
		zephyr,shell-uart = &lpuart2;
	};

	aliases {
		watchdog0 = &wdog;
		led0 = &red_led;
		led1 = &green_led;
		led2 = &blue_led;
		sw0 = &user_button_2;
		sw1 = &user_button_3;
		pwm-led0 = &red_pwm_led;
		pwm-led1 = &green_pwm_led;
		pwm-led2 = &blue_pwm_led;
		mcuboot-button0 = &user_button_2;
	};

	leds {
		compatible = "gpio-leds";
		red_led: led_0 {
			gpios = <&gpiod 10 GPIO_ACTIVE_LOW>;
			label = "Red LED";
		};
		green_led: led_1 {
			gpios = <&gpiod 5 GPIO_ACTIVE_LOW>;
			label = "Green LED";
		};
		blue_led: led_2 {
			gpios = <&gpiod 12 GPIO_ACTIVE_LOW>;
			label = "Blue LED";
		};
	};

	pwmleds {
		compatible = "pwm-leds";
		red_pwm_led: led_pwm_0 {
			pwms = <&ftm2 0 PWM_HZ(20) PWM_POLARITY_INVERTED>;
			label = "RED RGB PWM LED";
		};
		green_pwm_led: led_pwm_1 {
			pwms = <&ftm2 3 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
			label = "GREEN RGB PWM LED";
		};
		blue_pwm_led: led_pwm_2 {
			pwms = <&ftm2 2 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
			label = "BLUE RGB PWM LED";
		};
	};

	gpio_keys {
		compatible = "gpio-keys";
		user_button_2: button_0 {
			label = "User SW2";
			gpios = <&gpioe 14 GPIO_ACTIVE_LOW>;
			zephyr,code = <INPUT_KEY_0>;
		};
		user_button_3: button_1 {
			label = "User SW3";
			gpios = <&gpiod 3 GPIO_ACTIVE_LOW>;
			zephyr,code = <INPUT_KEY_1>;
		};
	};
};

&idle {
	min-residency-us = <1>;
};

&stop {
	min-residency-us = <20000>;
	exit-latency-us = <13>;
};

&lpuart2 {
	dmas = <&edma 5 6>, <&edma 6 7>;
	dma-names = "rx", "tx";
	status = "okay";
	pinctrl-0 = <&lpuart2_default>;
	pinctrl-names = "default";
	current-speed = <115200>;
};

&adc0 {
	status = "okay";
	sample-time = <12>;
	vref-mv = <3300>;
	pinctrl-0 = <&adc0_default>;
	pinctrl-names = "default";
};

&gpiod {
	status = "okay";
};

&scg {
	bus_clk {
		clock-div = <2>;
	};
};

&gpioe {
	status = "okay";
};

&rtc {
	status = "okay";
	clock-source = "LPO";
};

&lpi2c0 {
	status = "okay";
	pinctrl-0 = <&lpi2c0_default>;
	pinctrl-names = "default";
};

&lpi2c1 {
	status = "okay";
	pinctrl-0 = <&lpi2c1_default>;
	pinctrl-names = "default";
};

&ftm2 {
	status = "okay";
	compatible = "nxp,ftm-pwm";
	#pwm-cells = <3>;
	clocks = <&scg KINETIS_SCG_SIRC_CLK>;
	prescaler = <128>;
	pinctrl-0 = <&ftm2_default>;
	pinctrl-names = "default";
	clock-source = "system";
};

&flash0 {

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;
		boot_partition: partition@0 {
			label = "mcuboot";
			reg = <0x00000000 DT_SIZE_K(64)>;
			read-only;
		};
		/* The MCUBoot swap-move algorithm uses the last 3 sectors
		 * of the primary slot0 for swap status and move.
		 */
		slot0_partition: partition@10000 {
			label = "image-0";
			reg = <0x00010000 (DT_SIZE_K(202) + DT_SIZE_K(6))>;
		};
		slot1_partition: partition@44000 {
			label = "image-1";
			reg = <0x00044000 DT_SIZE_K(202)>;
		};
		storage_partition: partition@76800 {
			label = "storage";
			reg = <0x00076800 DT_SIZE_K(38)>;
		};
	};
};

&lpspi0 {
	dmas = <&edma 0 14>, <&edma 1 15>;
	dma-names = "rx", "tx";
	status = "okay";
	pinctrl-0 = <&lpspi0_default>;
	pinctrl-names = "default";
};

&edma {
	status = "okay";
};

&wdog {
	status = "okay";
};