/*
 * NOTE: Autogenerated file by gen_board_pinctrl.py
 * for MK82FN256VLL15/signal_configuration.xml
 *
 * Copyright (c) 2022, NXP
 * SPDX-License-Identifier: Apache-2.0
 */


#include <nxp/kinetis/MK82FN256VLL15-pinctrl.h>

&pinctrl {
	adc0_default: adc0_default {
		group0 {
			pinmux = <ADC0_SE15_PTC1>;
			drive-strength = "low";
			slew-rate = "fast";
		};
	};

	ftm3_default: ftm3_default {
		group0 {
			pinmux = <FTM3_CH4_PTC8>,
				<FTM3_CH5_PTC9>,
				<FTM3_CH6_PTC10>;
			drive-strength = "low";
			slew-rate = "fast";
		};
	};

	i2c0_default: i2c0_default {
		group0 {
			pinmux = <I2C0_SCL_PTB2>,
				<I2C0_SDA_PTB3>;
			drive-strength = "low";
			drive-open-drain;
			slew-rate = "fast";
		};
	};

	i2c3_default: i2c3_default {
		group0 {
			pinmux = <I2C3_SCL_PTA2>,
				<I2C3_SDA_PTA1>;
			drive-strength = "low";
			drive-open-drain;
			bias-pull-up;
			slew-rate = "fast";
		};
	};

	lpuart0_default: lpuart0_default {
		group0 {
			pinmux = <LPUART0_RX_PTB16>,
				<LPUART0_TX_PTB17>;
			drive-strength = "low";
			slew-rate = "fast";
		};
	};

	lpuart4_default: lpuart4_default {
		group0 {
			pinmux = <LPUART4_RX_PTC14>,
				<LPUART4_TX_PTC15>;
			drive-strength = "low";
			slew-rate = "fast";
		};
	};

	spi0_default: spi0_default {
		group0 {
			pinmux = <SPI0_SCK_PTD1>,
				<SPI0_SOUT_PTD2>,
				<SPI0_SIN_PTD3>,
				<SPI0_PCS1_PTD4>;
			drive-strength = "low";
			slew-rate = "fast";
		};
	};

	spi1_default: spi1_default {
		group0 {
			pinmux = <SPI1_SCK_PTE1>,
				<SPI1_SOUT_PTE2>,
				<SPI1_SIN_PTE4>,
				<SPI1_PCS0_PTE5>;
			drive-strength = "low";
			slew-rate = "fast";
		};
	};

};