/* * Copyright (c) 2022 The Chromium OS Authors * * SPDX-License-Identifier: Apache-2.0 */ #ifndef ZEPHYR_SUBSYS_USBC_PE_COMMON_INTERNAL_H_ #define ZEPHYR_SUBSYS_USBC_PE_COMMON_INTERNAL_H_ #include #include #include #include #include #include "usbc_timer.h" /** * @brief Used in sub-machines for message transmit and receive operation */ enum sm_msg_xmit { /* Wait for a message transmission sub-machine state */ SM_WAIT_FOR_TX, /* Wait for a message reception sub-machine state */ SM_WAIT_FOR_RX, }; /** * @brief Used in sub-machines for message source hard reset operation */ enum sm_hard_reset { /* Start the hard-reset sub-machine state */ SM_HARD_RESET_START, /* Wait for hard-reset to complete sub-machine state */ SM_HARD_RESET_WAIT, }; /** * @brief Policy Engine Errors */ enum pe_error { /** Transmit error */ ERR_XMIT, }; /** * @brief Policy Engine Layer States */ enum usbc_pe_state { /** PE_SNK_Startup */ PE_SNK_STARTUP, /** PE_SNK_Discovery */ PE_SNK_DISCOVERY, /** PE_SNK_Wait_for_Capabilities */ PE_SNK_WAIT_FOR_CAPABILITIES, /** PE_SNK_Evaluate_Capability */ PE_SNK_EVALUATE_CAPABILITY, /** PE_SNK_Select_Capability */ PE_SNK_SELECT_CAPABILITY, /** PE_SNK_Transition_Sink */ PE_SNK_TRANSITION_SINK, /** PE_SNK_Ready */ PE_SNK_READY, /** PE_SNK_Hard_Reset */ PE_SNK_HARD_RESET, /** PE_SNK_Transition_to_default */ PE_SNK_TRANSITION_TO_DEFAULT, /** PE_SNK_Give_Sink_Cap */ PE_SNK_GIVE_SINK_CAP, /** PE_SNK_Get_Source_Cap */ PE_SNK_GET_SOURCE_CAP, /** PE_SRC_Startup */ PE_SRC_STARTUP, /** PE_SRC_Discovery */ PE_SRC_DISCOVERY, /** PE_SRC_Send_Capabilities */ PE_SRC_SEND_CAPABILITIES, /** PE_SRC_Negotiate_capability */ PE_SRC_NEGOTIATE_CAPABILITY, /** PE_SRC_Capability_Response */ PE_SRC_CAPABILITY_RESPONSE, /** PE_SRC_Transition_Supply */ PE_SRC_TRANSITION_SUPPLY, /** PE_SRC_Ready */ PE_SRC_READY, /** PE_SRC_Hard_Reset */ PE_SRC_HARD_RESET, /** PE_SRC_Hard_Reset_Received */ PE_SRC_HARD_RESET_RECEIVED, /** PE_SRC_Transition_To_Default */ PE_SRC_TRANSITION_TO_DEFAULT, /** PE_SNK_Soft_Reset and PE_SRC_Soft_Reset */ PE_SOFT_RESET, /** PE_SNK_Chunk_Received or PE_SRC_Chunk_Received */ PE_CHUNK_RECEIVED, /**PE_Send_Soft_Reset */ PE_SEND_SOFT_RESET, /** PE_Send_Not_Supported */ PE_SEND_NOT_SUPPORTED, /** PE_DRS_Evaluate_Swap */ PE_DRS_EVALUATE_SWAP, /** PE_DRS_Send_Swap */ PE_DRS_SEND_SWAP, /** PE_Get_Sink_Cap */ PE_GET_SINK_CAP, /** PE_Suspend. Not part of the PD specification. */ PE_SUSPEND, /** * NOTE: The states below should not be called directly. They're used * internally by the state machine. */ /** PE_SENDER_RESPONSE_PARENT. Not part of the PD specification. */ PE_SENDER_RESPONSE_PARENT, /** PE_SRC_HARD_RESET_PARENT. Not part of the PD specification. */ PE_SRC_HARD_RESET_PARENT, /** Number of PE States */ PE_STATE_COUNT }; /** * @brief Policy Engine Layer Flags */ enum pe_flags { /** Accept message received from port partner */ PE_FLAGS_ACCEPT = 0, /** A message we requested to be sent has been transmitted */ PE_FLAGS_TX_COMPLETE = 1, /** A message sent by a port partner has been received */ PE_FLAGS_MSG_RECEIVED = 2, /** * A hard reset has been requested by the DPM but has not been sent, * not currently used */ PE_FLAGS_HARD_RESET_PENDING = 3, /** An explicit contract is in place with our port partner */ PE_FLAGS_EXPLICIT_CONTRACT = 4, /** * Waiting for Sink Capabailities timed out. Used for retry error * handling */ PE_FLAGS_SNK_WAIT_CAP_TIMEOUT = 5, /** * Flag to note current Atomic Message Sequence (AMS) is interruptible. * If this flag is not set the AMS is non-interruptible. This flag must * be set in the interruptible's message state entry. */ PE_FLAGS_INTERRUPTIBLE_AMS = 6, /** Flag to trigger sending a Data Role Swap */ PE_FLAGS_DR_SWAP_TO_DFP = 7, /** Flag is set when an AMS is initiated by the Device Policy Manager */ PE_FLAGS_DPM_INITIATED_AMS = 8, /** Flag to note message was discarded due to incoming message */ PE_FLAGS_MSG_DISCARDED = 9, /** Flag to trigger sending a soft reset */ PE_FLAGS_SEND_SOFT_RESET = 10, /** * This flag is set when a Wait message is received in response to a * Sink REQUEST */ PE_FLAGS_WAIT_SINK_REQUEST = 11, /** * This flag is set when a Wait message is received in response to a * Data Role Swap */ PE_FLAGS_WAIT_DATA_ROLE_SWAP = 12, /** * This flag is set when a protocol error occurs. */ PE_FLAGS_PROTOCOL_ERROR = 13, /** This flag is set when a transmit error occurs. */ PE_FLAGS_MSG_XMIT_ERROR = 14, /* The Port Partner is PD connected */ PE_FLAGS_PD_CONNECTED = 15, /* The Port partner has been PD connected at least once */ PE_FLAGS_HAS_BEEN_PD_CONNECTED = 16, /* A Protocol Error didn't generate a Soft Reset */ PE_FLAGS_PROTOCOL_ERROR_NO_SOFT_RESET = 17, /* This flag is set when the first AMS message is sent */ PE_FLAGS_FIRST_MSG_SENT = 18, /** Number of PE Flags */ PE_FLAGS_COUNT }; /** * @brief Policy Engine State Machine Object */ struct policy_engine { /** state machine context */ struct smf_ctx ctx; /** Port device */ const struct device *dev; /** state machine flags */ ATOMIC_DEFINE(flags, PE_FLAGS_COUNT); /** current port power role (SOURCE or SINK) */ enum tc_power_role power_role; /** current port data role (DFP or UFP) */ enum tc_data_role data_role; /** port address where soft resets are sent */ enum pd_packet_type soft_reset_sop; /** DPM request */ enum usbc_policy_request_t dpm_request; /** generic variable used for simple in state statemachines */ uint32_t submachine; #ifdef CONFIG_USBC_CSM_SOURCE_ONLY /** The Sink made a valid request of the Source if true */ bool snk_request_can_be_met; /** Outcome of the Sink request */ enum usbc_snk_req_reply_t snk_request_reply; /** Save Sink Request Object */ uint32_t snk_request; /** Present Contract stores the current Sink Request */ uint32_t present_contract; #endif /* Counters */ /** * This counter is used to retry the Hard Reset whenever there is no * response from the remote device. */ uint32_t hard_reset_counter; #ifdef CONFIG_USBC_CSM_SOURCE_ONLY /** * This counter tracks the number of times a Source Caps message was * sent. */ uint32_t caps_counter; #endif /* Timers */ /** tSenderResponse timer */ struct usbc_timer_t pd_t_sender_response; /** tChunkingNotSupported timer */ struct usbc_timer_t pd_t_chunking_not_supported; /** Time to wait before resending message after WAIT reception */ struct usbc_timer_t pd_t_wait_to_resend; #ifdef CONFIG_USBC_CSM_SINK_ONLY /** tTypeCSinkWaitCap timer */ struct usbc_timer_t pd_t_typec_sink_wait_cap; /** tPSTransition timer */ struct usbc_timer_t pd_t_ps_transition; /** tSinkRequest timer */ struct usbc_timer_t pd_t_sink_request; #else /** tTypeCSendSourceCap timer */ struct usbc_timer_t pd_t_typec_send_source_cap; /** tNoResponse timer */ struct usbc_timer_t pd_t_no_response; /** tPSHardReset timer */ struct usbc_timer_t pd_t_ps_hard_reset; #endif /* CONFIG_USBC_CSM_SINK_ONLY */ }; /** * @brief First message in AMS has been sent * * @param dev Pointer to the device structure for the driver instance */ void pe_first_msg_sent(const struct device *dev); /** * @brief Sets a Policy Engine state * * @param dev Pointer to the device structure for the driver instance * @param state next PE State to enter */ void pe_set_state(const struct device *dev, const enum usbc_pe_state state); /** * @brief Get the Policy Engine's current state * * @param dev Pointer to the device structure for the driver instance * @retval current PE state */ enum usbc_pe_state pe_get_state(const struct device *dev); /** * @brief Get the Policy Engine's previous state * * @param dev Pointer to the device structure for the driver instance * @retval last PE state */ enum usbc_pe_state pe_get_last_state(const struct device *dev); /** * @brief Send a soft reset message * * @param dev Pointer to the device structure for the driver instance * @param type SOP* to send soft reset message */ void pe_send_soft_reset(const struct device *dev, const enum pd_packet_type type); /** * @brief Send a Power Delivery Data Message * * @param dev Pointer to the device structure for the driver instance * @param type SOP* to send message * @param msg PD data message to send */ void pe_send_data_msg(const struct device *dev, const enum pd_packet_type type, const enum pd_data_msg_type msg); /** * @brief Send a Power Delivery Control Message * * @param dev Pointer to the device structure for the driver instance * @param type SOP* to send message * @param msg PD control message to send */ void pe_send_ctrl_msg(const struct device *dev, const enum pd_packet_type type, const enum pd_ctrl_msg_type msg); /** * @brief Request desired voltage from source. * * @param dev Pointer to the device structure for the driver instance * @param rdo Request Data Object to send */ void pe_send_request_msg(const struct device *dev, const uint32_t rdo); /** * @brief Transitions state after receiving an extended message. * * @param dev Pointer to the device structure for the driver instance */ void extended_message_not_supported(const struct device *dev); /** * @brief Check if a specific control message was received * * @param dev Pointer to the device structure for the driver instance * @param header message header containing the message * @param mt message type to check * @retval true if the header contains the message type, else false */ bool received_control_message(const struct device *dev, const union pd_header header, const enum pd_ctrl_msg_type mt); /** * @brief Check if a specific data message was received * * @param dev Pointer to the device structure for the driver instance * @param header message header containing the message * @param mt message type to check * @param true if the header contains the message type, else false */ bool received_data_message(const struct device *dev, const union pd_header header, const enum pd_data_msg_type mt); /** * @brief Check a DPM policy * * @param dev Pointer to the device structure for the driver instance * @param pc The DPM policy to check * @retval true if the DPM approves the check, else false */ bool policy_check(const struct device *dev, const enum usbc_policy_check_t pc); /** * @brief Notify the DPM of a policy change * * @param dev Pointer to the device structure for the driver instance * @param notify The notification to send the DPM */ void policy_notify(const struct device *dev, const enum usbc_policy_notify_t notify); /** * @brief Notify the DPM of a WAIT message reception * * @param dev Pointer to the device structure for the driver instance * @param notify Wait message to send to DPM * @retval true if the Policy Engine should wait and try the action again */ bool policy_wait_notify(const struct device *dev, const enum usbc_policy_wait_t notify); /** * @brief Send the received source caps to the DPM * * @param dev Pointer to the device structure for the driver instance * @param pdos pointer to pdos to send * @param num_pdos number of pdos to send */ void policy_set_src_cap(const struct device *dev, const uint32_t *pdos, const int num_pdos); /** * @brief Check if the sink request can be met by the DPM */ enum usbc_snk_req_reply_t policy_check_sink_request(const struct device *dev, const uint32_t request_msg); /** * @brief Check if the Present Contract is still valid. * * @note The contract is considered "invalid" if the previous current/voltage * are no longer available AND the sink fails to make a valid request. */ bool policy_present_contract_is_valid(const struct device *dev, const uint32_t present_contract); /** * @brief Get a Request Data Object from the DPM * * @param dev Pointer to the device structure for the driver instance * @retval the RDO from the DPM */ uint32_t policy_get_request_data_object(const struct device *dev); /** * @brief Check if the sink is a default level * * @param dev Pointer to the device structure for the driver instance * @retval true if sink is at default value, else false */ bool policy_is_snk_at_default(const struct device *dev); /** * @brief Get sink caps from the DPM * * @param dev Pointer to the device structure for the driver instance * @param pdos pointer to pdo sink caps * @param num_pdos number of pdo sink caps */ void policy_get_snk_cap(const struct device *dev, uint32_t **pdos, int *num_pdos); /** * @brief Check if Source Power Supply is ready */ bool policy_is_ps_ready(const struct device *dev); /** * @brief Informs the Device Policy Manager that the Sink * is unable to use the current Source Caps and should * should enable a different set of Source Caps. True * is returned if new Source Caps are available, else * false. */ bool policy_change_src_caps(const struct device *dev); /** * @brief End and atomic messaging sequence */ void pe_dpm_end_ams(const struct device *dev); /** * @brief Handle common DPM requests * * @param dev Pointer to the device structure for the driver instance * @retval true if request was handled, else false */ bool common_dpm_requests(const struct device *dev); /** * @brief This function must only be called in the subsystem init function. * * @param dev Pointer to the device structure for the driver instance. */ void pe_subsys_init(const struct device *dev); /** * @brief Start the Policy Engine Layer state machine. This is only called * from the Type-C state machine. * * @param dev Pointer to the device structure for the driver instance */ void pe_start(const struct device *dev); /** * @brief Suspend the Policy Engine Layer state machine. This is only called * from the Type-C state machine. * * @param dev Pointer to the device structure for the driver instance */ void pe_suspend(const struct device *dev); /** * @brief Run the Policy Engine Layer state machine. This is called from the * subsystems port stack thread * * @param dev Pointer to the device structure for the driver instance * @param dpm_request Device Policy Manager request */ void pe_run(const struct device *dev, const int32_t dpm_request); /** * @brief Query if the Policy Engine is running * * @param dev Pointer to the device structure for the driver instance * * @retval TRUE if the Policy Engine is running * @retval FALSE if the Policy Engine is not running */ bool pe_is_running(const struct device *dev); /** * @brief Informs the Policy Engine that a message was successfully sent * * @param dev Pointer to the device structure for the driver instance */ void pe_message_sent(const struct device *dev); /** * @brief Informs the Policy Engine of an error. * * @param dev Pointer to the device structure for the driver instance * @param e policy error * @param type port partner address where error was generated */ void pe_report_error(const struct device *dev, const enum pe_error e, const enum pd_packet_type type); /** * @brief Informs the Policy Engine that a transmit message was discarded * because of an incoming message. * * @param dev Pointer to the device structure for the driver instance */ void pe_report_discard(const struct device *dev); /** * @brief Called by the Protocol Layer to informs the Policy Engine * that a message has been received. * * @param dev Pointer to the device structure for the driver instance */ void pe_message_received(const struct device *dev); /** * @brief Informs the Policy Engine that a hard reset was received. * * @param dev Pointer to the device structure for the driver instance */ void pe_got_hard_reset(const struct device *dev); /** * @brief Informs the Policy Engine that a soft reset was received. * * @param dev Pointer to the device structure for the driver instance */ void pe_got_soft_reset(const struct device *dev); /** * @brief Informs the Policy Engine that a hard reset was sent. * * @param dev Pointer to the device structure for the driver instance */ void pe_hard_reset_sent(const struct device *dev); /** * @brief Indicates if an explicit contract is in place * * @param dev Pointer to the device structure for the driver instance * * @retval true if an explicit contract is in place, else false */ bool pe_is_explicit_contract(const struct device *dev); /* * @brief Informs the Policy Engine that it should invalidate the * explicit contract. * * @param dev Pointer to the device structure for the driver instance */ void pe_invalidate_explicit_contract(const struct device *dev); /** * @brief Return true if the PE is within an atomic messaging sequence * that it initiated with a SOP* port partner. * * @note The PRL layer polls this instead of using AMS_START and AMS_END * notification from the PE that is called out by the spec * * @param dev Pointer to the device structure for the driver instance */ bool pe_dpm_initiated_ams(const struct device *dev); /** * @brief Get the current data role * * @param dev Pointer to the device structure for the driver instance * * @retval data role */ enum tc_data_role pe_get_data_role(const struct device *dev); /** * @brief Sets the data role and updates the TCPC * * @param dev Pointer to the device structure for the driver instance * @param dr Data Role to be set */ void pe_set_data_role(const struct device *dev, enum tc_data_role dr); /** * @brief Get the current power role * * @param dev Pointer to the device structure for the driver instance * * @retval power role */ enum tc_power_role pe_get_power_role(const struct device *dev); /** * @brief Get cable plug role * * @param dev Pointer to the device structure for the driver instance * * @retval cable plug role */ enum tc_cable_plug pe_get_cable_plug(const struct device *dev); #endif /* ZEPHYR_SUBSYS_USBC_PE_COMMON_INTERNAL_H_ */