/* * Copyright (c) 2016, Wind River Systems, Inc. * * SPDX-License-Identifier: Apache-2.0 */ /** * @file * * @brief Public kernel APIs. */ #ifndef ZEPHYR_INCLUDE_KERNEL_H_ #define ZEPHYR_INCLUDE_KERNEL_H_ #if !defined(_ASMLANGUAGE) #include #include #include #include #include #include #include #include #ifdef __cplusplus extern "C" { #endif /* * Zephyr currently assumes the size of a couple standard types to simplify * print string formats. Let's make sure this doesn't change without notice. */ BUILD_ASSERT(sizeof(int32_t) == sizeof(int)); BUILD_ASSERT(sizeof(int64_t) == sizeof(long long)); BUILD_ASSERT(sizeof(intptr_t) == sizeof(long)); /** * @brief Kernel APIs * @defgroup kernel_apis Kernel APIs * @{ * @} */ #define K_ANY NULL #if CONFIG_NUM_COOP_PRIORITIES + CONFIG_NUM_PREEMPT_PRIORITIES == 0 #error Zero available thread priorities defined! #endif #define K_PRIO_COOP(x) (-(CONFIG_NUM_COOP_PRIORITIES - (x))) #define K_PRIO_PREEMPT(x) (x) #define K_HIGHEST_THREAD_PRIO (-CONFIG_NUM_COOP_PRIORITIES) #define K_LOWEST_THREAD_PRIO CONFIG_NUM_PREEMPT_PRIORITIES #define K_IDLE_PRIO K_LOWEST_THREAD_PRIO #define K_HIGHEST_APPLICATION_THREAD_PRIO (K_HIGHEST_THREAD_PRIO) #define K_LOWEST_APPLICATION_THREAD_PRIO (K_LOWEST_THREAD_PRIO - 1) #ifdef CONFIG_POLL #define Z_POLL_EVENT_OBJ_INIT(obj) \ .poll_events = SYS_DLIST_STATIC_INIT(&obj.poll_events), #define Z_DECL_POLL_EVENT sys_dlist_t poll_events; #else #define Z_POLL_EVENT_OBJ_INIT(obj) #define Z_DECL_POLL_EVENT #endif struct k_thread; struct k_mutex; struct k_sem; struct k_msgq; struct k_mbox; struct k_pipe; struct k_queue; struct k_fifo; struct k_lifo; struct k_stack; struct k_mem_slab; struct k_timer; struct k_poll_event; struct k_poll_signal; struct k_mem_domain; struct k_mem_partition; struct k_futex; struct k_event; enum execution_context_types { K_ISR = 0, K_COOP_THREAD, K_PREEMPT_THREAD, }; /* private, used by k_poll and k_work_poll */ struct k_work_poll; typedef int (*_poller_cb_t)(struct k_poll_event *event, uint32_t state); /** * @addtogroup thread_apis * @{ */ typedef void (*k_thread_user_cb_t)(const struct k_thread *thread, void *user_data); /** * @brief Iterate over all the threads in the system. * * This routine iterates over all the threads in the system and * calls the user_cb function for each thread. * * @param user_cb Pointer to the user callback function. * @param user_data Pointer to user data. * * @note @kconfig{CONFIG_THREAD_MONITOR} must be set for this function * to be effective. * @note This API uses @ref k_spin_lock to protect the _kernel.threads * list which means creation of new threads and terminations of existing * threads are blocked until this API returns. */ void k_thread_foreach(k_thread_user_cb_t user_cb, void *user_data); /** * @brief Iterate over all the threads in the system without locking. * * This routine works exactly the same like @ref k_thread_foreach * but unlocks interrupts when user_cb is executed. * * @param user_cb Pointer to the user callback function. * @param user_data Pointer to user data. * * @note @kconfig{CONFIG_THREAD_MONITOR} must be set for this function * to be effective. * @note This API uses @ref k_spin_lock only when accessing the _kernel.threads * queue elements. It unlocks it during user callback function processing. * If a new task is created when this @c foreach function is in progress, * the added new task would not be included in the enumeration. * If a task is aborted during this enumeration, there would be a race here * and there is a possibility that this aborted task would be included in the * enumeration. * @note If the task is aborted and the memory occupied by its @c k_thread * structure is reused when this @c k_thread_foreach_unlocked is in progress * it might even lead to the system behave unstable. * This function may never return, as it would follow some @c next task * pointers treating given pointer as a pointer to the k_thread structure * while it is something different right now. * Do not reuse the memory that was occupied by k_thread structure of aborted * task if it was aborted after this function was called in any context. */ void k_thread_foreach_unlocked( k_thread_user_cb_t user_cb, void *user_data); /** @} */ /** * @defgroup thread_apis Thread APIs * @ingroup kernel_apis * @{ */ #endif /* !_ASMLANGUAGE */ /* * Thread user options. May be needed by assembly code. Common part uses low * bits, arch-specific use high bits. */ /** * @brief system thread that must not abort * */ #define K_ESSENTIAL (BIT(0)) /** * @brief FPU registers are managed by context switch * * @details * This option indicates that the thread uses the CPU's floating point * registers. This instructs the kernel to take additional steps to save * and restore the contents of these registers when scheduling the thread. * No effect if @kconfig{CONFIG_FPU_SHARING} is not enabled. */ #define K_FP_IDX 1 #define K_FP_REGS (BIT(K_FP_IDX)) /** * @brief user mode thread * * This thread has dropped from supervisor mode to user mode and consequently * has additional restrictions */ #define K_USER (BIT(2)) /** * @brief Inherit Permissions * * @details * Indicates that the thread being created should inherit all kernel object * permissions from the thread that created it. No effect if * @kconfig{CONFIG_USERSPACE} is not enabled. */ #define K_INHERIT_PERMS (BIT(3)) /** * @brief Callback item state * * @details * This is a single bit of state reserved for "callback manager" * utilities (p4wq initially) who need to track operations invoked * from within a user-provided callback they have been invoked. * Effectively it serves as a tiny bit of zero-overhead TLS data. */ #define K_CALLBACK_STATE (BIT(4)) /** * @brief DSP registers are managed by context switch * * @details * This option indicates that the thread uses the CPU's DSP registers. * This instructs the kernel to take additional steps to save and * restore the contents of these registers when scheduling the thread. * No effect if @kconfig{CONFIG_DSP_SHARING} is not enabled. */ #define K_DSP_IDX 6 #define K_DSP_REGS (BIT(K_DSP_IDX)) /** * @brief AGU registers are managed by context switch * * @details * This option indicates that the thread uses the ARC processor's XY * memory and DSP feature. Often used with @kconfig{CONFIG_ARC_AGU_SHARING}. * No effect if @kconfig{CONFIG_ARC_AGU_SHARING} is not enabled. */ #define K_AGU_IDX 7 #define K_AGU_REGS (BIT(K_AGU_IDX)) /** * @brief FP and SSE registers are managed by context switch on x86 * * @details * This option indicates that the thread uses the x86 CPU's floating point * and SSE registers. This instructs the kernel to take additional steps to * save and restore the contents of these registers when scheduling * the thread. No effect if @kconfig{CONFIG_X86_SSE} is not enabled. */ #define K_SSE_REGS (BIT(7)) /* end - thread options */ #if !defined(_ASMLANGUAGE) /** * @brief Dynamically allocate a thread stack. * * Relevant stack creation flags include: * - @ref K_USER allocate a userspace thread (requires `CONFIG_USERSPACE=y`) * * @param size Stack size in bytes. * @param flags Stack creation flags, or 0. * * @retval the allocated thread stack on success. * @retval NULL on failure. * * @see CONFIG_DYNAMIC_THREAD */ __syscall k_thread_stack_t *k_thread_stack_alloc(size_t size, int flags); /** * @brief Free a dynamically allocated thread stack. * * @param stack Pointer to the thread stack. * * @retval 0 on success. * @retval -EBUSY if the thread stack is in use. * @retval -EINVAL if @p stack is invalid. * @retval -ENOSYS if dynamic thread stack allocation is disabled * * @see CONFIG_DYNAMIC_THREAD */ __syscall int k_thread_stack_free(k_thread_stack_t *stack); /** * @brief Create a thread. * * This routine initializes a thread, then schedules it for execution. * * The new thread may be scheduled for immediate execution or a delayed start. * If the newly spawned thread does not have a delayed start the kernel * scheduler may preempt the current thread to allow the new thread to * execute. * * Thread options are architecture-specific, and can include K_ESSENTIAL, * K_FP_REGS, and K_SSE_REGS. Multiple options may be specified by separating * them using "|" (the logical OR operator). * * Stack objects passed to this function must be originally defined with * either of these macros in order to be portable: * * - K_THREAD_STACK_DEFINE() - For stacks that may support either user or * supervisor threads. * - K_KERNEL_STACK_DEFINE() - For stacks that may support supervisor * threads only. These stacks use less memory if CONFIG_USERSPACE is * enabled. * * The stack_size parameter has constraints. It must either be: * * - The original size value passed to K_THREAD_STACK_DEFINE() or * K_KERNEL_STACK_DEFINE() * - The return value of K_THREAD_STACK_SIZEOF(stack) if the stack was * defined with K_THREAD_STACK_DEFINE() * - The return value of K_KERNEL_STACK_SIZEOF(stack) if the stack was * defined with K_KERNEL_STACK_DEFINE(). * * Using other values, or sizeof(stack) may produce undefined behavior. * * @param new_thread Pointer to uninitialized struct k_thread * @param stack Pointer to the stack space. * @param stack_size Stack size in bytes. * @param entry Thread entry function. * @param p1 1st entry point parameter. * @param p2 2nd entry point parameter. * @param p3 3rd entry point parameter. * @param prio Thread priority. * @param options Thread options. * @param delay Scheduling delay, or K_NO_WAIT (for no delay). * * @return ID of new thread. * */ __syscall k_tid_t k_thread_create(struct k_thread *new_thread, k_thread_stack_t *stack, size_t stack_size, k_thread_entry_t entry, void *p1, void *p2, void *p3, int prio, uint32_t options, k_timeout_t delay); /** * @brief Drop a thread's privileges permanently to user mode * * This allows a supervisor thread to be re-used as a user thread. * This function does not return, but control will transfer to the provided * entry point as if this was a new user thread. * * The implementation ensures that the stack buffer contents are erased. * Any thread-local storage will be reverted to a pristine state. * * Memory domain membership, resource pool assignment, kernel object * permissions, priority, and thread options are preserved. * * A common use of this function is to re-use the main thread as a user thread * once all supervisor mode-only tasks have been completed. * * @param entry Function to start executing from * @param p1 1st entry point parameter * @param p2 2nd entry point parameter * @param p3 3rd entry point parameter */ FUNC_NORETURN void k_thread_user_mode_enter(k_thread_entry_t entry, void *p1, void *p2, void *p3); /** * @brief Grant a thread access to a set of kernel objects * * This is a convenience function. For the provided thread, grant access to * the remaining arguments, which must be pointers to kernel objects. * * The thread object must be initialized (i.e. running). The objects don't * need to be. * Note that NULL shouldn't be passed as an argument. * * @param thread Thread to grant access to objects * @param ... list of kernel object pointers */ #define k_thread_access_grant(thread, ...) \ FOR_EACH_FIXED_ARG(k_object_access_grant, (;), thread, __VA_ARGS__) /** * @brief Assign a resource memory pool to a thread * * By default, threads have no resource pool assigned unless their parent * thread has a resource pool, in which case it is inherited. Multiple * threads may be assigned to the same memory pool. * * Changing a thread's resource pool will not migrate allocations from the * previous pool. * * @param thread Target thread to assign a memory pool for resource requests. * @param heap Heap object to use for resources, * or NULL if the thread should no longer have a memory pool. */ static inline void k_thread_heap_assign(struct k_thread *thread, struct k_heap *heap) { thread->resource_pool = heap; } #if defined(CONFIG_INIT_STACKS) && defined(CONFIG_THREAD_STACK_INFO) /** * @brief Obtain stack usage information for the specified thread * * User threads will need to have permission on the target thread object. * * Some hardware may prevent inspection of a stack buffer currently in use. * If this API is called from supervisor mode, on the currently running thread, * on a platform which selects @kconfig{CONFIG_NO_UNUSED_STACK_INSPECTION}, an * error will be generated. * * @param thread Thread to inspect stack information * @param unused_ptr Output parameter, filled in with the unused stack space * of the target thread in bytes. * @return 0 on success * @return -EBADF Bad thread object (user mode only) * @return -EPERM No permissions on thread object (user mode only) * #return -ENOTSUP Forbidden by hardware policy * @return -EINVAL Thread is uninitialized or exited (user mode only) * @return -EFAULT Bad memory address for unused_ptr (user mode only) */ __syscall int k_thread_stack_space_get(const struct k_thread *thread, size_t *unused_ptr); #endif #if (K_HEAP_MEM_POOL_SIZE > 0) /** * @brief Assign the system heap as a thread's resource pool * * Similar to k_thread_heap_assign(), but the thread will use * the kernel heap to draw memory. * * Use with caution, as a malicious thread could perform DoS attacks on the * kernel heap. * * @param thread Target thread to assign the system heap for resource requests * */ void k_thread_system_pool_assign(struct k_thread *thread); #endif /* (K_HEAP_MEM_POOL_SIZE > 0) */ /** * @brief Sleep until a thread exits * * The caller will be put to sleep until the target thread exits, either due * to being aborted, self-exiting, or taking a fatal error. This API returns * immediately if the thread isn't running. * * This API may only be called from ISRs with a K_NO_WAIT timeout, * where it can be useful as a predicate to detect when a thread has * aborted. * * @param thread Thread to wait to exit * @param timeout upper bound time to wait for the thread to exit. * @retval 0 success, target thread has exited or wasn't running * @retval -EBUSY returned without waiting * @retval -EAGAIN waiting period timed out * @retval -EDEADLK target thread is joining on the caller, or target thread * is the caller */ __syscall int k_thread_join(struct k_thread *thread, k_timeout_t timeout); /** * @brief Put the current thread to sleep. * * This routine puts the current thread to sleep for @a duration, * specified as a k_timeout_t object. * * @note if @a timeout is set to K_FOREVER then the thread is suspended. * * @param timeout Desired duration of sleep. * * @return Zero if the requested time has elapsed or if the thread was woken up * by the \ref k_wakeup call, the time left to sleep rounded up to the nearest * millisecond. */ __syscall int32_t k_sleep(k_timeout_t timeout); /** * @brief Put the current thread to sleep. * * This routine puts the current thread to sleep for @a duration milliseconds. * * @param ms Number of milliseconds to sleep. * * @return Zero if the requested time has elapsed or if the thread was woken up * by the \ref k_wakeup call, the time left to sleep rounded up to the nearest * millisecond. */ static inline int32_t k_msleep(int32_t ms) { return k_sleep(Z_TIMEOUT_MS(ms)); } /** * @brief Put the current thread to sleep with microsecond resolution. * * This function is unlikely to work as expected without kernel tuning. * In particular, because the lower bound on the duration of a sleep is * the duration of a tick, @kconfig{CONFIG_SYS_CLOCK_TICKS_PER_SEC} must be * adjusted to achieve the resolution desired. The implications of doing * this must be understood before attempting to use k_usleep(). Use with * caution. * * @param us Number of microseconds to sleep. * * @return Zero if the requested time has elapsed or if the thread was woken up * by the \ref k_wakeup call, the time left to sleep rounded up to the nearest * microsecond. */ __syscall int32_t k_usleep(int32_t us); /** * @brief Cause the current thread to busy wait. * * This routine causes the current thread to execute a "do nothing" loop for * @a usec_to_wait microseconds. * * @note The clock used for the microsecond-resolution delay here may * be skewed relative to the clock used for system timeouts like * k_sleep(). For example k_busy_wait(1000) may take slightly more or * less time than k_sleep(K_MSEC(1)), with the offset dependent on * clock tolerances. * * @note In case when @kconfig{CONFIG_SYSTEM_CLOCK_SLOPPY_IDLE} and * @kconfig{CONFIG_PM} options are enabled, this function may not work. * The timer/clock used for delay processing may be disabled/inactive. */ __syscall void k_busy_wait(uint32_t usec_to_wait); /** * @brief Check whether it is possible to yield in the current context. * * This routine checks whether the kernel is in a state where it is possible to * yield or call blocking API's. It should be used by code that needs to yield * to perform correctly, but can feasibly be called from contexts where that * is not possible. For example in the PRE_KERNEL initialization step, or when * being run from the idle thread. * * @return True if it is possible to yield in the current context, false otherwise. */ bool k_can_yield(void); /** * @brief Yield the current thread. * * This routine causes the current thread to yield execution to another * thread of the same or higher priority. If there are no other ready threads * of the same or higher priority, the routine returns immediately. */ __syscall void k_yield(void); /** * @brief Wake up a sleeping thread. * * This routine prematurely wakes up @a thread from sleeping. * * If @a thread is not currently sleeping, the routine has no effect. * * @param thread ID of thread to wake. */ __syscall void k_wakeup(k_tid_t thread); /** * @brief Query thread ID of the current thread. * * This unconditionally queries the kernel via a system call. * * @note Use k_current_get() unless absolutely sure this is necessary. * This should only be used directly where the thread local * variable cannot be used or may contain invalid values * if thread local storage (TLS) is enabled. If TLS is not * enabled, this is the same as k_current_get(). * * @return ID of current thread. */ __attribute_const__ __syscall k_tid_t k_sched_current_thread_query(void); /** * @brief Get thread ID of the current thread. * * @return ID of current thread. * */ __attribute_const__ static inline k_tid_t k_current_get(void) { #ifdef CONFIG_CURRENT_THREAD_USE_TLS /* Thread-local cache of current thread ID, set in z_thread_entry() */ extern __thread k_tid_t z_tls_current; return z_tls_current; #else return k_sched_current_thread_query(); #endif } /** * @brief Abort a thread. * * This routine permanently stops execution of @a thread. The thread is taken * off all kernel queues it is part of (i.e. the ready queue, the timeout * queue, or a kernel object wait queue). However, any kernel resources the * thread might currently own (such as mutexes or memory blocks) are not * released. It is the responsibility of the caller of this routine to ensure * all necessary cleanup is performed. * * After k_thread_abort() returns, the thread is guaranteed not to be * running or to become runnable anywhere on the system. Normally * this is done via blocking the caller (in the same manner as * k_thread_join()), but in interrupt context on SMP systems the * implementation is required to spin for threads that are running on * other CPUs. * * @param thread ID of thread to abort. */ __syscall void k_thread_abort(k_tid_t thread); /** * @brief Start an inactive thread * * If a thread was created with K_FOREVER in the delay parameter, it will * not be added to the scheduling queue until this function is called * on it. * * @param thread thread to start */ __syscall void k_thread_start(k_tid_t thread); k_ticks_t z_timeout_expires(const struct _timeout *timeout); k_ticks_t z_timeout_remaining(const struct _timeout *timeout); #ifdef CONFIG_SYS_CLOCK_EXISTS /** * @brief Get time when a thread wakes up, in system ticks * * This routine computes the system uptime when a waiting thread next * executes, in units of system ticks. If the thread is not waiting, * it returns current system time. */ __syscall k_ticks_t k_thread_timeout_expires_ticks(const struct k_thread *t); static inline k_ticks_t z_impl_k_thread_timeout_expires_ticks( const struct k_thread *t) { return z_timeout_expires(&t->base.timeout); } /** * @brief Get time remaining before a thread wakes up, in system ticks * * This routine computes the time remaining before a waiting thread * next executes, in units of system ticks. If the thread is not * waiting, it returns zero. */ __syscall k_ticks_t k_thread_timeout_remaining_ticks(const struct k_thread *t); static inline k_ticks_t z_impl_k_thread_timeout_remaining_ticks( const struct k_thread *t) { return z_timeout_remaining(&t->base.timeout); } #endif /* CONFIG_SYS_CLOCK_EXISTS */ /** * @cond INTERNAL_HIDDEN */ struct _static_thread_data { struct k_thread *init_thread; k_thread_stack_t *init_stack; unsigned int init_stack_size; k_thread_entry_t init_entry; void *init_p1; void *init_p2; void *init_p3; int init_prio; uint32_t init_options; const char *init_name; #ifdef CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME int32_t init_delay_ms; #else k_timeout_t init_delay; #endif }; #ifdef CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME #define Z_THREAD_INIT_DELAY_INITIALIZER(ms) .init_delay_ms = (ms) #define Z_THREAD_INIT_DELAY(thread) SYS_TIMEOUT_MS((thread)->init_delay_ms) #else #define Z_THREAD_INIT_DELAY_INITIALIZER(ms) .init_delay = SYS_TIMEOUT_MS(ms) #define Z_THREAD_INIT_DELAY(thread) (thread)->init_delay #endif #define Z_THREAD_INITIALIZER(thread, stack, stack_size, \ entry, p1, p2, p3, \ prio, options, delay, tname) \ { \ .init_thread = (thread), \ .init_stack = (stack), \ .init_stack_size = (stack_size), \ .init_entry = (k_thread_entry_t)entry, \ .init_p1 = (void *)p1, \ .init_p2 = (void *)p2, \ .init_p3 = (void *)p3, \ .init_prio = (prio), \ .init_options = (options), \ .init_name = STRINGIFY(tname), \ Z_THREAD_INIT_DELAY_INITIALIZER(delay) \ } /* * Refer to K_THREAD_DEFINE() and K_KERNEL_THREAD_DEFINE() for * information on arguments. */ #define Z_THREAD_COMMON_DEFINE(name, stack_size, \ entry, p1, p2, p3, \ prio, options, delay) \ struct k_thread _k_thread_obj_##name; \ STRUCT_SECTION_ITERABLE(_static_thread_data, \ _k_thread_data_##name) = \ Z_THREAD_INITIALIZER(&_k_thread_obj_##name, \ _k_thread_stack_##name, stack_size,\ entry, p1, p2, p3, prio, options, \ delay, name); \ const k_tid_t name = (k_tid_t)&_k_thread_obj_##name /** * INTERNAL_HIDDEN @endcond */ /** * @brief Statically define and initialize a thread. * * The thread may be scheduled for immediate execution or a delayed start. * * Thread options are architecture-specific, and can include K_ESSENTIAL, * K_FP_REGS, and K_SSE_REGS. Multiple options may be specified by separating * them using "|" (the logical OR operator). * * The ID of the thread can be accessed using: * * @code extern const k_tid_t ; @endcode * * @param name Name of the thread. * @param stack_size Stack size in bytes. * @param entry Thread entry function. * @param p1 1st entry point parameter. * @param p2 2nd entry point parameter. * @param p3 3rd entry point parameter. * @param prio Thread priority. * @param options Thread options. * @param delay Scheduling delay (in milliseconds), zero for no delay. * * @note Static threads with zero delay should not normally have * MetaIRQ priority levels. This can preempt the system * initialization handling (depending on the priority of the main * thread) and cause surprising ordering side effects. It will not * affect anything in the OS per se, but consider it bad practice. * Use a SYS_INIT() callback if you need to run code before entrance * to the application main(). */ #define K_THREAD_DEFINE(name, stack_size, \ entry, p1, p2, p3, \ prio, options, delay) \ K_THREAD_STACK_DEFINE(_k_thread_stack_##name, stack_size); \ Z_THREAD_COMMON_DEFINE(name, stack_size, entry, p1, p2, p3, \ prio, options, delay) /** * @brief Statically define and initialize a thread intended to run only in kernel mode. * * The thread may be scheduled for immediate execution or a delayed start. * * Thread options are architecture-specific, and can include K_ESSENTIAL, * K_FP_REGS, and K_SSE_REGS. Multiple options may be specified by separating * them using "|" (the logical OR operator). * * The ID of the thread can be accessed using: * * @code extern const k_tid_t ; @endcode * * @note Threads defined by this can only run in kernel mode, and cannot be * transformed into user thread via k_thread_user_mode_enter(). * * @warning Depending on the architecture, the stack size (@p stack_size) * may need to be multiples of CONFIG_MMU_PAGE_SIZE (if MMU) * or in power-of-two size (if MPU). * * @param name Name of the thread. * @param stack_size Stack size in bytes. * @param entry Thread entry function. * @param p1 1st entry point parameter. * @param p2 2nd entry point parameter. * @param p3 3rd entry point parameter. * @param prio Thread priority. * @param options Thread options. * @param delay Scheduling delay (in milliseconds), zero for no delay. */ #define K_KERNEL_THREAD_DEFINE(name, stack_size, \ entry, p1, p2, p3, \ prio, options, delay) \ K_KERNEL_STACK_DEFINE(_k_thread_stack_##name, stack_size); \ Z_THREAD_COMMON_DEFINE(name, stack_size, entry, p1, p2, p3, \ prio, options, delay) /** * @brief Get a thread's priority. * * This routine gets the priority of @a thread. * * @param thread ID of thread whose priority is needed. * * @return Priority of @a thread. */ __syscall int k_thread_priority_get(k_tid_t thread); /** * @brief Set a thread's priority. * * This routine immediately changes the priority of @a thread. * * Rescheduling can occur immediately depending on the priority @a thread is * set to: * * - If its priority is raised above the priority of the caller of this * function, and the caller is preemptible, @a thread will be scheduled in. * * - If the caller operates on itself, it lowers its priority below that of * other threads in the system, and the caller is preemptible, the thread of * highest priority will be scheduled in. * * Priority can be assigned in the range of -CONFIG_NUM_COOP_PRIORITIES to * CONFIG_NUM_PREEMPT_PRIORITIES-1, where -CONFIG_NUM_COOP_PRIORITIES is the * highest priority. * * @param thread ID of thread whose priority is to be set. * @param prio New priority. * * @warning Changing the priority of a thread currently involved in mutex * priority inheritance may result in undefined behavior. */ __syscall void k_thread_priority_set(k_tid_t thread, int prio); #ifdef CONFIG_SCHED_DEADLINE /** * @brief Set deadline expiration time for scheduler * * This sets the "deadline" expiration as a time delta from the * current time, in the same units used by k_cycle_get_32(). The * scheduler (when deadline scheduling is enabled) will choose the * next expiring thread when selecting between threads at the same * static priority. Threads at different priorities will be scheduled * according to their static priority. * * @note Deadlines are stored internally using 32 bit unsigned * integers. The number of cycles between the "first" deadline in the * scheduler queue and the "last" deadline must be less than 2^31 (i.e * a signed non-negative quantity). Failure to adhere to this rule * may result in scheduled threads running in an incorrect deadline * order. * * @note Despite the API naming, the scheduler makes no guarantees * the thread WILL be scheduled within that deadline, nor does it take * extra metadata (like e.g. the "runtime" and "period" parameters in * Linux sched_setattr()) that allows the kernel to validate the * scheduling for achievability. Such features could be implemented * above this call, which is simply input to the priority selection * logic. * * @note You should enable @kconfig{CONFIG_SCHED_DEADLINE} in your project * configuration. * * @param thread A thread on which to set the deadline * @param deadline A time delta, in cycle units * */ __syscall void k_thread_deadline_set(k_tid_t thread, int deadline); #endif #ifdef CONFIG_SCHED_CPU_MASK /** * @brief Sets all CPU enable masks to zero * * After this returns, the thread will no longer be schedulable on any * CPUs. The thread must not be currently runnable. * * @note You should enable @kconfig{CONFIG_SCHED_CPU_MASK} in your project * configuration. * * @param thread Thread to operate upon * @return Zero on success, otherwise error code */ int k_thread_cpu_mask_clear(k_tid_t thread); /** * @brief Sets all CPU enable masks to one * * After this returns, the thread will be schedulable on any CPU. The * thread must not be currently runnable. * * @note You should enable @kconfig{CONFIG_SCHED_CPU_MASK} in your project * configuration. * * @param thread Thread to operate upon * @return Zero on success, otherwise error code */ int k_thread_cpu_mask_enable_all(k_tid_t thread); /** * @brief Enable thread to run on specified CPU * * The thread must not be currently runnable. * * @note You should enable @kconfig{CONFIG_SCHED_CPU_MASK} in your project * configuration. * * @param thread Thread to operate upon * @param cpu CPU index * @return Zero on success, otherwise error code */ int k_thread_cpu_mask_enable(k_tid_t thread, int cpu); /** * @brief Prevent thread to run on specified CPU * * The thread must not be currently runnable. * * @note You should enable @kconfig{CONFIG_SCHED_CPU_MASK} in your project * configuration. * * @param thread Thread to operate upon * @param cpu CPU index * @return Zero on success, otherwise error code */ int k_thread_cpu_mask_disable(k_tid_t thread, int cpu); /** * @brief Pin a thread to a CPU * * Pin a thread to a CPU by first clearing the cpu mask and then enabling the * thread on the selected CPU. * * @param thread Thread to operate upon * @param cpu CPU index * @return Zero on success, otherwise error code */ int k_thread_cpu_pin(k_tid_t thread, int cpu); #endif /** * @brief Suspend a thread. * * This routine prevents the kernel scheduler from making @a thread * the current thread. All other internal operations on @a thread are * still performed; for example, kernel objects it is waiting on are * still handed to it. Note that any existing timeouts * (e.g. k_sleep(), or a timeout argument to k_sem_take() et. al.) * will be canceled. On resume, the thread will begin running * immediately and return from the blocked call. * * When the target thread is active on another CPU, the caller will block until * the target thread is halted (suspended or aborted). But if the caller is in * an interrupt context, it will spin waiting for that target thread active on * another CPU to halt. * * If @a thread is already suspended, the routine has no effect. * * @param thread ID of thread to suspend. */ __syscall void k_thread_suspend(k_tid_t thread); /** * @brief Resume a suspended thread. * * This routine allows the kernel scheduler to make @a thread the current * thread, when it is next eligible for that role. * * If @a thread is not currently suspended, the routine has no effect. * * @param thread ID of thread to resume. */ __syscall void k_thread_resume(k_tid_t thread); /** * @brief Set time-slicing period and scope. * * This routine specifies how the scheduler will perform time slicing of * preemptible threads. * * To enable time slicing, @a slice must be non-zero. The scheduler * ensures that no thread runs for more than the specified time limit * before other threads of that priority are given a chance to execute. * Any thread whose priority is higher than @a prio is exempted, and may * execute as long as desired without being preempted due to time slicing. * * Time slicing only limits the maximum amount of time a thread may continuously * execute. Once the scheduler selects a thread for execution, there is no * minimum guaranteed time the thread will execute before threads of greater or * equal priority are scheduled. * * When the current thread is the only one of that priority eligible * for execution, this routine has no effect; the thread is immediately * rescheduled after the slice period expires. * * To disable timeslicing, set both @a slice and @a prio to zero. * * @param slice Maximum time slice length (in milliseconds). * @param prio Highest thread priority level eligible for time slicing. */ void k_sched_time_slice_set(int32_t slice, int prio); /** * @brief Set thread time slice * * As for k_sched_time_slice_set, but (when * CONFIG_TIMESLICE_PER_THREAD=y) sets the timeslice for a specific * thread. When non-zero, this timeslice will take precedence over * the global value. * * When such a thread's timeslice expires, the configured callback * will be called before the thread is removed/re-added to the run * queue. This callback will occur in interrupt context, and the * specified thread is guaranteed to have been preempted by the * currently-executing ISR. Such a callback is free to, for example, * modify the thread priority or slice time for future execution, * suspend the thread, etc... * * @note Unlike the older API, the time slice parameter here is * specified in ticks, not milliseconds. Ticks have always been the * internal unit, and not all platforms have integer conversions * between the two. * * @note Threads with a non-zero slice time set will be timesliced * always, even if they are higher priority than the maximum timeslice * priority set via k_sched_time_slice_set(). * * @note The callback notification for slice expiration happens, as it * must, while the thread is still "current", and thus it happens * before any registered timeouts at this tick. This has the somewhat * confusing side effect that the tick time (c.f. k_uptime_get()) does * not yet reflect the expired ticks. Applications wishing to make * fine-grained timing decisions within this callback should use the * cycle API, or derived facilities like k_thread_runtime_stats_get(). * * @param th A valid, initialized thread * @param slice_ticks Maximum timeslice, in ticks * @param expired Callback function called on slice expiration * @param data Parameter for the expiration handler */ void k_thread_time_slice_set(struct k_thread *th, int32_t slice_ticks, k_thread_timeslice_fn_t expired, void *data); /** @} */ /** * @addtogroup isr_apis * @{ */ /** * @brief Determine if code is running at interrupt level. * * This routine allows the caller to customize its actions, depending on * whether it is a thread or an ISR. * * @funcprops \isr_ok * * @return false if invoked by a thread. * @return true if invoked by an ISR. */ bool k_is_in_isr(void); /** * @brief Determine if code is running in a preemptible thread. * * This routine allows the caller to customize its actions, depending on * whether it can be preempted by another thread. The routine returns a 'true' * value if all of the following conditions are met: * * - The code is running in a thread, not at ISR. * - The thread's priority is in the preemptible range. * - The thread has not locked the scheduler. * * @funcprops \isr_ok * * @return 0 if invoked by an ISR or by a cooperative thread. * @return Non-zero if invoked by a preemptible thread. */ __syscall int k_is_preempt_thread(void); /** * @brief Test whether startup is in the before-main-task phase. * * This routine allows the caller to customize its actions, depending on * whether it being invoked before the kernel is fully active. * * @funcprops \isr_ok * * @return true if invoked before post-kernel initialization * @return false if invoked during/after post-kernel initialization */ static inline bool k_is_pre_kernel(void) { extern bool z_sys_post_kernel; /* in init.c */ return !z_sys_post_kernel; } /** * @} */ /** * @addtogroup thread_apis * @{ */ /** * @brief Lock the scheduler. * * This routine prevents the current thread from being preempted by another * thread by instructing the scheduler to treat it as a cooperative thread. * If the thread subsequently performs an operation that makes it unready, * it will be context switched out in the normal manner. When the thread * again becomes the current thread, its non-preemptible status is maintained. * * This routine can be called recursively. * * Owing to clever implementation details, scheduler locks are * extremely fast for non-userspace threads (just one byte * inc/decrement in the thread struct). * * @note This works by elevating the thread priority temporarily to a * cooperative priority, allowing cheap synchronization vs. other * preemptible or cooperative threads running on the current CPU. It * does not prevent preemption or asynchrony of other types. It does * not prevent threads from running on other CPUs when CONFIG_SMP=y. * It does not prevent interrupts from happening, nor does it prevent * threads with MetaIRQ priorities from preempting the current thread. * In general this is a historical API not well-suited to modern * applications, use with care. */ void k_sched_lock(void); /** * @brief Unlock the scheduler. * * This routine reverses the effect of a previous call to k_sched_lock(). * A thread must call the routine once for each time it called k_sched_lock() * before the thread becomes preemptible. */ void k_sched_unlock(void); /** * @brief Set current thread's custom data. * * This routine sets the custom data for the current thread to @ value. * * Custom data is not used by the kernel itself, and is freely available * for a thread to use as it sees fit. It can be used as a framework * upon which to build thread-local storage. * * @param value New custom data value. * */ __syscall void k_thread_custom_data_set(void *value); /** * @brief Get current thread's custom data. * * This routine returns the custom data for the current thread. * * @return Current custom data value. */ __syscall void *k_thread_custom_data_get(void); /** * @brief Set current thread name * * Set the name of the thread to be used when @kconfig{CONFIG_THREAD_MONITOR} * is enabled for tracing and debugging. * * @param thread Thread to set name, or NULL to set the current thread * @param str Name string * @retval 0 on success * @retval -EFAULT Memory access error with supplied string * @retval -ENOSYS Thread name configuration option not enabled * @retval -EINVAL Thread name too long */ __syscall int k_thread_name_set(k_tid_t thread, const char *str); /** * @brief Get thread name * * Get the name of a thread * * @param thread Thread ID * @retval Thread name, or NULL if configuration not enabled */ const char *k_thread_name_get(k_tid_t thread); /** * @brief Copy the thread name into a supplied buffer * * @param thread Thread to obtain name information * @param buf Destination buffer * @param size Destination buffer size * @retval -ENOSPC Destination buffer too small * @retval -EFAULT Memory access error * @retval -ENOSYS Thread name feature not enabled * @retval 0 Success */ __syscall int k_thread_name_copy(k_tid_t thread, char *buf, size_t size); /** * @brief Get thread state string * * This routine generates a human friendly string containing the thread's * state, and copies as much of it as possible into @a buf. * * @param thread_id Thread ID * @param buf Buffer into which to copy state strings * @param buf_size Size of the buffer * * @retval Pointer to @a buf if data was copied, else a pointer to "". */ const char *k_thread_state_str(k_tid_t thread_id, char *buf, size_t buf_size); /** * @} */ /** * @addtogroup clock_apis * @{ */ /** * @brief Generate null timeout delay. * * This macro generates a timeout delay that instructs a kernel API * not to wait if the requested operation cannot be performed immediately. * * @return Timeout delay value. */ #define K_NO_WAIT Z_TIMEOUT_NO_WAIT /** * @brief Generate timeout delay from nanoseconds. * * This macro generates a timeout delay that instructs a kernel API to * wait up to @a t nanoseconds to perform the requested operation. * Note that timer precision is limited to the tick rate, not the * requested value. * * @param t Duration in nanoseconds. * * @return Timeout delay value. */ #define K_NSEC(t) Z_TIMEOUT_NS(t) /** * @brief Generate timeout delay from microseconds. * * This macro generates a timeout delay that instructs a kernel API * to wait up to @a t microseconds to perform the requested operation. * Note that timer precision is limited to the tick rate, not the * requested value. * * @param t Duration in microseconds. * * @return Timeout delay value. */ #define K_USEC(t) Z_TIMEOUT_US(t) /** * @brief Generate timeout delay from cycles. * * This macro generates a timeout delay that instructs a kernel API * to wait up to @a t cycles to perform the requested operation. * * @param t Duration in cycles. * * @return Timeout delay value. */ #define K_CYC(t) Z_TIMEOUT_CYC(t) /** * @brief Generate timeout delay from system ticks. * * This macro generates a timeout delay that instructs a kernel API * to wait up to @a t ticks to perform the requested operation. * * @param t Duration in system ticks. * * @return Timeout delay value. */ #define K_TICKS(t) Z_TIMEOUT_TICKS(t) /** * @brief Generate timeout delay from milliseconds. * * This macro generates a timeout delay that instructs a kernel API * to wait up to @a ms milliseconds to perform the requested operation. * * @param ms Duration in milliseconds. * * @return Timeout delay value. */ #define K_MSEC(ms) Z_TIMEOUT_MS(ms) /** * @brief Generate timeout delay from seconds. * * This macro generates a timeout delay that instructs a kernel API * to wait up to @a s seconds to perform the requested operation. * * @param s Duration in seconds. * * @return Timeout delay value. */ #define K_SECONDS(s) K_MSEC((s) * MSEC_PER_SEC) /** * @brief Generate timeout delay from minutes. * This macro generates a timeout delay that instructs a kernel API * to wait up to @a m minutes to perform the requested operation. * * @param m Duration in minutes. * * @return Timeout delay value. */ #define K_MINUTES(m) K_SECONDS((m) * 60) /** * @brief Generate timeout delay from hours. * * This macro generates a timeout delay that instructs a kernel API * to wait up to @a h hours to perform the requested operation. * * @param h Duration in hours. * * @return Timeout delay value. */ #define K_HOURS(h) K_MINUTES((h) * 60) /** * @brief Generate infinite timeout delay. * * This macro generates a timeout delay that instructs a kernel API * to wait as long as necessary to perform the requested operation. * * @return Timeout delay value. */ #define K_FOREVER Z_FOREVER #ifdef CONFIG_TIMEOUT_64BIT /** * @brief Generates an absolute/uptime timeout value from system ticks * * This macro generates a timeout delay that represents an expiration * at the absolute uptime value specified, in system ticks. That is, the * timeout will expire immediately after the system uptime reaches the * specified tick count. * * @param t Tick uptime value * @return Timeout delay value */ #define K_TIMEOUT_ABS_TICKS(t) \ Z_TIMEOUT_TICKS(Z_TICK_ABS((k_ticks_t)MAX(t, 0))) /** * @brief Generates an absolute/uptime timeout value from milliseconds * * This macro generates a timeout delay that represents an expiration * at the absolute uptime value specified, in milliseconds. That is, * the timeout will expire immediately after the system uptime reaches * the specified tick count. * * @param t Millisecond uptime value * @return Timeout delay value */ #define K_TIMEOUT_ABS_MS(t) K_TIMEOUT_ABS_TICKS(k_ms_to_ticks_ceil64(t)) /** * @brief Generates an absolute/uptime timeout value from microseconds * * This macro generates a timeout delay that represents an expiration * at the absolute uptime value specified, in microseconds. That is, * the timeout will expire immediately after the system uptime reaches * the specified time. Note that timer precision is limited by the * system tick rate and not the requested timeout value. * * @param t Microsecond uptime value * @return Timeout delay value */ #define K_TIMEOUT_ABS_US(t) K_TIMEOUT_ABS_TICKS(k_us_to_ticks_ceil64(t)) /** * @brief Generates an absolute/uptime timeout value from nanoseconds * * This macro generates a timeout delay that represents an expiration * at the absolute uptime value specified, in nanoseconds. That is, * the timeout will expire immediately after the system uptime reaches * the specified time. Note that timer precision is limited by the * system tick rate and not the requested timeout value. * * @param t Nanosecond uptime value * @return Timeout delay value */ #define K_TIMEOUT_ABS_NS(t) K_TIMEOUT_ABS_TICKS(k_ns_to_ticks_ceil64(t)) /** * @brief Generates an absolute/uptime timeout value from system cycles * * This macro generates a timeout delay that represents an expiration * at the absolute uptime value specified, in cycles. That is, the * timeout will expire immediately after the system uptime reaches the * specified time. Note that timer precision is limited by the system * tick rate and not the requested timeout value. * * @param t Cycle uptime value * @return Timeout delay value */ #define K_TIMEOUT_ABS_CYC(t) K_TIMEOUT_ABS_TICKS(k_cyc_to_ticks_ceil64(t)) #endif /** * @} */ /** * @cond INTERNAL_HIDDEN */ struct k_timer { /* * _timeout structure must be first here if we want to use * dynamic timer allocation. timeout.node is used in the double-linked * list of free timers */ struct _timeout timeout; /* wait queue for the (single) thread waiting on this timer */ _wait_q_t wait_q; /* runs in ISR context */ void (*expiry_fn)(struct k_timer *timer); /* runs in the context of the thread that calls k_timer_stop() */ void (*stop_fn)(struct k_timer *timer); /* timer period */ k_timeout_t period; /* timer status */ uint32_t status; /* user-specific data, also used to support legacy features */ void *user_data; SYS_PORT_TRACING_TRACKING_FIELD(k_timer) #ifdef CONFIG_OBJ_CORE_TIMER struct k_obj_core obj_core; #endif }; #define Z_TIMER_INITIALIZER(obj, expiry, stop) \ { \ .timeout = { \ .node = {},\ .fn = z_timer_expiration_handler, \ .dticks = 0, \ }, \ .wait_q = Z_WAIT_Q_INIT(&obj.wait_q), \ .expiry_fn = expiry, \ .stop_fn = stop, \ .status = 0, \ .user_data = 0, \ } /** * INTERNAL_HIDDEN @endcond */ /** * @defgroup timer_apis Timer APIs * @ingroup kernel_apis * @{ */ /** * @typedef k_timer_expiry_t * @brief Timer expiry function type. * * A timer's expiry function is executed by the system clock interrupt handler * each time the timer expires. The expiry function is optional, and is only * invoked if the timer has been initialized with one. * * @param timer Address of timer. */ typedef void (*k_timer_expiry_t)(struct k_timer *timer); /** * @typedef k_timer_stop_t * @brief Timer stop function type. * * A timer's stop function is executed if the timer is stopped prematurely. * The function runs in the context of call that stops the timer. As * k_timer_stop() can be invoked from an ISR, the stop function must be * callable from interrupt context (isr-ok). * * The stop function is optional, and is only invoked if the timer has been * initialized with one. * * @param timer Address of timer. */ typedef void (*k_timer_stop_t)(struct k_timer *timer); /** * @brief Statically define and initialize a timer. * * The timer can be accessed outside the module where it is defined using: * * @code extern struct k_timer ; @endcode * * @param name Name of the timer variable. * @param expiry_fn Function to invoke each time the timer expires. * @param stop_fn Function to invoke if the timer is stopped while running. */ #define K_TIMER_DEFINE(name, expiry_fn, stop_fn) \ STRUCT_SECTION_ITERABLE(k_timer, name) = \ Z_TIMER_INITIALIZER(name, expiry_fn, stop_fn) /** * @brief Initialize a timer. * * This routine initializes a timer, prior to its first use. * * @param timer Address of timer. * @param expiry_fn Function to invoke each time the timer expires. * @param stop_fn Function to invoke if the timer is stopped while running. */ void k_timer_init(struct k_timer *timer, k_timer_expiry_t expiry_fn, k_timer_stop_t stop_fn); /** * @brief Start a timer. * * This routine starts a timer, and resets its status to zero. The timer * begins counting down using the specified duration and period values. * * Attempting to start a timer that is already running is permitted. * The timer's status is reset to zero and the timer begins counting down * using the new duration and period values. * * @param timer Address of timer. * @param duration Initial timer duration. * @param period Timer period. */ __syscall void k_timer_start(struct k_timer *timer, k_timeout_t duration, k_timeout_t period); /** * @brief Stop a timer. * * This routine stops a running timer prematurely. The timer's stop function, * if one exists, is invoked by the caller. * * Attempting to stop a timer that is not running is permitted, but has no * effect on the timer. * * @note The stop handler has to be callable from ISRs if @a k_timer_stop is to * be called from ISRs. * * @funcprops \isr_ok * * @param timer Address of timer. */ __syscall void k_timer_stop(struct k_timer *timer); /** * @brief Read timer status. * * This routine reads the timer's status, which indicates the number of times * it has expired since its status was last read. * * Calling this routine resets the timer's status to zero. * * @param timer Address of timer. * * @return Timer status. */ __syscall uint32_t k_timer_status_get(struct k_timer *timer); /** * @brief Synchronize thread to timer expiration. * * This routine blocks the calling thread until the timer's status is non-zero * (indicating that it has expired at least once since it was last examined) * or the timer is stopped. If the timer status is already non-zero, * or the timer is already stopped, the caller continues without waiting. * * Calling this routine resets the timer's status to zero. * * This routine must not be used by interrupt handlers, since they are not * allowed to block. * * @param timer Address of timer. * * @return Timer status. */ __syscall uint32_t k_timer_status_sync(struct k_timer *timer); #ifdef CONFIG_SYS_CLOCK_EXISTS /** * @brief Get next expiration time of a timer, in system ticks * * This routine returns the future system uptime reached at the next * time of expiration of the timer, in units of system ticks. If the * timer is not running, current system time is returned. * * @param timer The timer object * @return Uptime of expiration, in ticks */ __syscall k_ticks_t k_timer_expires_ticks(const struct k_timer *timer); static inline k_ticks_t z_impl_k_timer_expires_ticks( const struct k_timer *timer) { return z_timeout_expires(&timer->timeout); } /** * @brief Get time remaining before a timer next expires, in system ticks * * This routine computes the time remaining before a running timer * next expires, in units of system ticks. If the timer is not * running, it returns zero. */ __syscall k_ticks_t k_timer_remaining_ticks(const struct k_timer *timer); static inline k_ticks_t z_impl_k_timer_remaining_ticks( const struct k_timer *timer) { return z_timeout_remaining(&timer->timeout); } /** * @brief Get time remaining before a timer next expires. * * This routine computes the (approximate) time remaining before a running * timer next expires. If the timer is not running, it returns zero. * * @param timer Address of timer. * * @return Remaining time (in milliseconds). */ static inline uint32_t k_timer_remaining_get(struct k_timer *timer) { return k_ticks_to_ms_floor32(k_timer_remaining_ticks(timer)); } #endif /* CONFIG_SYS_CLOCK_EXISTS */ /** * @brief Associate user-specific data with a timer. * * This routine records the @a user_data with the @a timer, to be retrieved * later. * * It can be used e.g. in a timer handler shared across multiple subsystems to * retrieve data specific to the subsystem this timer is associated with. * * @param timer Address of timer. * @param user_data User data to associate with the timer. */ __syscall void k_timer_user_data_set(struct k_timer *timer, void *user_data); /** * @internal */ static inline void z_impl_k_timer_user_data_set(struct k_timer *timer, void *user_data) { timer->user_data = user_data; } /** * @brief Retrieve the user-specific data from a timer. * * @param timer Address of timer. * * @return The user data. */ __syscall void *k_timer_user_data_get(const struct k_timer *timer); static inline void *z_impl_k_timer_user_data_get(const struct k_timer *timer) { return timer->user_data; } /** @} */ /** * @addtogroup clock_apis * @ingroup kernel_apis * @{ */ /** * @brief Get system uptime, in system ticks. * * This routine returns the elapsed time since the system booted, in * ticks (c.f. @kconfig{CONFIG_SYS_CLOCK_TICKS_PER_SEC}), which is the * fundamental unit of resolution of kernel timekeeping. * * @return Current uptime in ticks. */ __syscall int64_t k_uptime_ticks(void); /** * @brief Get system uptime. * * This routine returns the elapsed time since the system booted, * in milliseconds. * * @note * While this function returns time in milliseconds, it does * not mean it has millisecond resolution. The actual resolution depends on * @kconfig{CONFIG_SYS_CLOCK_TICKS_PER_SEC} config option. * * @return Current uptime in milliseconds. */ static inline int64_t k_uptime_get(void) { return k_ticks_to_ms_floor64(k_uptime_ticks()); } /** * @brief Get system uptime (32-bit version). * * This routine returns the lower 32 bits of the system uptime in * milliseconds. * * Because correct conversion requires full precision of the system * clock there is no benefit to using this over k_uptime_get() unless * you know the application will never run long enough for the system * clock to approach 2^32 ticks. Calls to this function may involve * interrupt blocking and 64-bit math. * * @note * While this function returns time in milliseconds, it does * not mean it has millisecond resolution. The actual resolution depends on * @kconfig{CONFIG_SYS_CLOCK_TICKS_PER_SEC} config option * * @return The low 32 bits of the current uptime, in milliseconds. */ static inline uint32_t k_uptime_get_32(void) { return (uint32_t)k_uptime_get(); } /** * @brief Get elapsed time. * * This routine computes the elapsed time between the current system uptime * and an earlier reference time, in milliseconds. * * @param reftime Pointer to a reference time, which is updated to the current * uptime upon return. * * @return Elapsed time. */ static inline int64_t k_uptime_delta(int64_t *reftime) { int64_t uptime, delta; uptime = k_uptime_get(); delta = uptime - *reftime; *reftime = uptime; return delta; } /** * @brief Read the hardware clock. * * This routine returns the current time, as measured by the system's hardware * clock. * * @return Current hardware clock up-counter (in cycles). */ static inline uint32_t k_cycle_get_32(void) { return arch_k_cycle_get_32(); } /** * @brief Read the 64-bit hardware clock. * * This routine returns the current time in 64-bits, as measured by the * system's hardware clock, if available. * * @see CONFIG_TIMER_HAS_64BIT_CYCLE_COUNTER * * @return Current hardware clock up-counter (in cycles). */ static inline uint64_t k_cycle_get_64(void) { if (!IS_ENABLED(CONFIG_TIMER_HAS_64BIT_CYCLE_COUNTER)) { __ASSERT(0, "64-bit cycle counter not enabled on this platform. " "See CONFIG_TIMER_HAS_64BIT_CYCLE_COUNTER"); return 0; } return arch_k_cycle_get_64(); } /** * @} */ struct k_queue { sys_sflist_t data_q; struct k_spinlock lock; _wait_q_t wait_q; Z_DECL_POLL_EVENT SYS_PORT_TRACING_TRACKING_FIELD(k_queue) }; /** * @cond INTERNAL_HIDDEN */ #define Z_QUEUE_INITIALIZER(obj) \ { \ .data_q = SYS_SFLIST_STATIC_INIT(&obj.data_q), \ .lock = { }, \ .wait_q = Z_WAIT_Q_INIT(&obj.wait_q), \ Z_POLL_EVENT_OBJ_INIT(obj) \ } /** * INTERNAL_HIDDEN @endcond */ /** * @defgroup queue_apis Queue APIs * @ingroup kernel_apis * @{ */ /** * @brief Initialize a queue. * * This routine initializes a queue object, prior to its first use. * * @param queue Address of the queue. */ __syscall void k_queue_init(struct k_queue *queue); /** * @brief Cancel waiting on a queue. * * This routine causes first thread pending on @a queue, if any, to * return from k_queue_get() call with NULL value (as if timeout expired). * If the queue is being waited on by k_poll(), it will return with * -EINTR and K_POLL_STATE_CANCELLED state (and per above, subsequent * k_queue_get() will return NULL). * * @funcprops \isr_ok * * @param queue Address of the queue. */ __syscall void k_queue_cancel_wait(struct k_queue *queue); /** * @brief Append an element to the end of a queue. * * This routine appends a data item to @a queue. A queue data item must be * aligned on a word boundary, and the first word of the item is reserved * for the kernel's use. * * @funcprops \isr_ok * * @param queue Address of the queue. * @param data Address of the data item. */ void k_queue_append(struct k_queue *queue, void *data); /** * @brief Append an element to a queue. * * This routine appends a data item to @a queue. There is an implicit memory * allocation to create an additional temporary bookkeeping data structure from * the calling thread's resource pool, which is automatically freed when the * item is removed. The data itself is not copied. * * @funcprops \isr_ok * * @param queue Address of the queue. * @param data Address of the data item. * * @retval 0 on success * @retval -ENOMEM if there isn't sufficient RAM in the caller's resource pool */ __syscall int32_t k_queue_alloc_append(struct k_queue *queue, void *data); /** * @brief Prepend an element to a queue. * * This routine prepends a data item to @a queue. A queue data item must be * aligned on a word boundary, and the first word of the item is reserved * for the kernel's use. * * @funcprops \isr_ok * * @param queue Address of the queue. * @param data Address of the data item. */ void k_queue_prepend(struct k_queue *queue, void *data); /** * @brief Prepend an element to a queue. * * This routine prepends a data item to @a queue. There is an implicit memory * allocation to create an additional temporary bookkeeping data structure from * the calling thread's resource pool, which is automatically freed when the * item is removed. The data itself is not copied. * * @funcprops \isr_ok * * @param queue Address of the queue. * @param data Address of the data item. * * @retval 0 on success * @retval -ENOMEM if there isn't sufficient RAM in the caller's resource pool */ __syscall int32_t k_queue_alloc_prepend(struct k_queue *queue, void *data); /** * @brief Inserts an element to a queue. * * This routine inserts a data item to @a queue after previous item. A queue * data item must be aligned on a word boundary, and the first word of * the item is reserved for the kernel's use. * * @funcprops \isr_ok * * @param queue Address of the queue. * @param prev Address of the previous data item. * @param data Address of the data item. */ void k_queue_insert(struct k_queue *queue, void *prev, void *data); /** * @brief Atomically append a list of elements to a queue. * * This routine adds a list of data items to @a queue in one operation. * The data items must be in a singly-linked list, with the first word * in each data item pointing to the next data item; the list must be * NULL-terminated. * * @funcprops \isr_ok * * @param queue Address of the queue. * @param head Pointer to first node in singly-linked list. * @param tail Pointer to last node in singly-linked list. * * @retval 0 on success * @retval -EINVAL on invalid supplied data * */ int k_queue_append_list(struct k_queue *queue, void *head, void *tail); /** * @brief Atomically add a list of elements to a queue. * * This routine adds a list of data items to @a queue in one operation. * The data items must be in a singly-linked list implemented using a * sys_slist_t object. Upon completion, the original list is empty. * * @funcprops \isr_ok * * @param queue Address of the queue. * @param list Pointer to sys_slist_t object. * * @retval 0 on success * @retval -EINVAL on invalid data */ int k_queue_merge_slist(struct k_queue *queue, sys_slist_t *list); /** * @brief Get an element from a queue. * * This routine removes first data item from @a queue. The first word of the * data item is reserved for the kernel's use. * * @note @a timeout must be set to K_NO_WAIT if called from ISR. * * @funcprops \isr_ok * * @param queue Address of the queue. * @param timeout Non-negative waiting period to obtain a data item * or one of the special values K_NO_WAIT and * K_FOREVER. * * @return Address of the data item if successful; NULL if returned * without waiting, or waiting period timed out. */ __syscall void *k_queue_get(struct k_queue *queue, k_timeout_t timeout); /** * @brief Remove an element from a queue. * * This routine removes data item from @a queue. The first word of the * data item is reserved for the kernel's use. Removing elements from k_queue * rely on sys_slist_find_and_remove which is not a constant time operation. * * @note @a timeout must be set to K_NO_WAIT if called from ISR. * * @funcprops \isr_ok * * @param queue Address of the queue. * @param data Address of the data item. * * @return true if data item was removed */ bool k_queue_remove(struct k_queue *queue, void *data); /** * @brief Append an element to a queue only if it's not present already. * * This routine appends data item to @a queue. The first word of the data * item is reserved for the kernel's use. Appending elements to k_queue * relies on sys_slist_is_node_in_list which is not a constant time operation. * * @funcprops \isr_ok * * @param queue Address of the queue. * @param data Address of the data item. * * @return true if data item was added, false if not */ bool k_queue_unique_append(struct k_queue *queue, void *data); /** * @brief Query a queue to see if it has data available. * * Note that the data might be already gone by the time this function returns * if other threads are also trying to read from the queue. * * @funcprops \isr_ok * * @param queue Address of the queue. * * @return Non-zero if the queue is empty. * @return 0 if data is available. */ __syscall int k_queue_is_empty(struct k_queue *queue); static inline int z_impl_k_queue_is_empty(struct k_queue *queue) { return (int)sys_sflist_is_empty(&queue->data_q); } /** * @brief Peek element at the head of queue. * * Return element from the head of queue without removing it. * * @param queue Address of the queue. * * @return Head element, or NULL if queue is empty. */ __syscall void *k_queue_peek_head(struct k_queue *queue); /** * @brief Peek element at the tail of queue. * * Return element from the tail of queue without removing it. * * @param queue Address of the queue. * * @return Tail element, or NULL if queue is empty. */ __syscall void *k_queue_peek_tail(struct k_queue *queue); /** * @brief Statically define and initialize a queue. * * The queue can be accessed outside the module where it is defined using: * * @code extern struct k_queue ; @endcode * * @param name Name of the queue. */ #define K_QUEUE_DEFINE(name) \ STRUCT_SECTION_ITERABLE(k_queue, name) = \ Z_QUEUE_INITIALIZER(name) /** @} */ #ifdef CONFIG_USERSPACE /** * @brief futex structure * * A k_futex is a lightweight mutual exclusion primitive designed * to minimize kernel involvement. Uncontended operation relies * only on atomic access to shared memory. k_futex are tracked as * kernel objects and can live in user memory so that any access * bypasses the kernel object permission management mechanism. */ struct k_futex { atomic_t val; }; /** * @brief futex kernel data structure * * z_futex_data are the helper data structure for k_futex to complete * futex contended operation on kernel side, structure z_futex_data * of every futex object is invisible in user mode. */ struct z_futex_data { _wait_q_t wait_q; struct k_spinlock lock; }; #define Z_FUTEX_DATA_INITIALIZER(obj) \ { \ .wait_q = Z_WAIT_Q_INIT(&obj.wait_q) \ } /** * @defgroup futex_apis FUTEX APIs * @ingroup kernel_apis * @{ */ /** * @brief Pend the current thread on a futex * * Tests that the supplied futex contains the expected value, and if so, * goes to sleep until some other thread calls k_futex_wake() on it. * * @param futex Address of the futex. * @param expected Expected value of the futex, if it is different the caller * will not wait on it. * @param timeout Non-negative waiting period on the futex, or * one of the special values K_NO_WAIT or K_FOREVER. * @retval -EACCES Caller does not have read access to futex address. * @retval -EAGAIN If the futex value did not match the expected parameter. * @retval -EINVAL Futex parameter address not recognized by the kernel. * @retval -ETIMEDOUT Thread woke up due to timeout and not a futex wakeup. * @retval 0 if the caller went to sleep and was woken up. The caller * should check the futex's value on wakeup to determine if it needs * to block again. */ __syscall int k_futex_wait(struct k_futex *futex, int expected, k_timeout_t timeout); /** * @brief Wake one/all threads pending on a futex * * Wake up the highest priority thread pending on the supplied futex, or * wakeup all the threads pending on the supplied futex, and the behavior * depends on wake_all. * * @param futex Futex to wake up pending threads. * @param wake_all If true, wake up all pending threads; If false, * wakeup the highest priority thread. * @retval -EACCES Caller does not have access to the futex address. * @retval -EINVAL Futex parameter address not recognized by the kernel. * @retval Number of threads that were woken up. */ __syscall int k_futex_wake(struct k_futex *futex, bool wake_all); /** @} */ #endif /** * @defgroup event_apis Event APIs * @ingroup kernel_apis * @{ */ /** * Event Structure * @ingroup event_apis */ struct k_event { _wait_q_t wait_q; uint32_t events; struct k_spinlock lock; SYS_PORT_TRACING_TRACKING_FIELD(k_event) #ifdef CONFIG_OBJ_CORE_EVENT struct k_obj_core obj_core; #endif }; #define Z_EVENT_INITIALIZER(obj) \ { \ .wait_q = Z_WAIT_Q_INIT(&obj.wait_q), \ .events = 0 \ } /** * @brief Initialize an event object * * This routine initializes an event object, prior to its first use. * * @param event Address of the event object. */ __syscall void k_event_init(struct k_event *event); /** * @brief Post one or more events to an event object * * This routine posts one or more events to an event object. All tasks waiting * on the event object @a event whose waiting conditions become met by this * posting immediately unpend. * * Posting differs from setting in that posted events are merged together with * the current set of events tracked by the event object. * * @param event Address of the event object * @param events Set of events to post to @a event * * @retval Previous value of the events in @a event */ __syscall uint32_t k_event_post(struct k_event *event, uint32_t events); /** * @brief Set the events in an event object * * This routine sets the events stored in event object to the specified value. * All tasks waiting on the event object @a event whose waiting conditions * become met by this immediately unpend. * * Setting differs from posting in that set events replace the current set of * events tracked by the event object. * * @param event Address of the event object * @param events Set of events to set in @a event * * @retval Previous value of the events in @a event */ __syscall uint32_t k_event_set(struct k_event *event, uint32_t events); /** * @brief Set or clear the events in an event object * * This routine sets the events stored in event object to the specified value. * All tasks waiting on the event object @a event whose waiting conditions * become met by this immediately unpend. Unlike @ref k_event_set, this routine * allows specific event bits to be set and cleared as determined by the mask. * * @param event Address of the event object * @param events Set of events to set/clear in @a event * @param events_mask Mask to be applied to @a events * * @retval Previous value of the events in @a events_mask */ __syscall uint32_t k_event_set_masked(struct k_event *event, uint32_t events, uint32_t events_mask); /** * @brief Clear the events in an event object * * This routine clears (resets) the specified events stored in an event object. * * @param event Address of the event object * @param events Set of events to clear in @a event * * @retval Previous value of the events in @a event */ __syscall uint32_t k_event_clear(struct k_event *event, uint32_t events); /** * @brief Wait for any of the specified events * * This routine waits on event object @a event until any of the specified * events have been delivered to the event object, or the maximum wait time * @a timeout has expired. A thread may wait on up to 32 distinctly numbered * events that are expressed as bits in a single 32-bit word. * * @note The caller must be careful when resetting if there are multiple threads * waiting for the event object @a event. * * @param event Address of the event object * @param events Set of desired events on which to wait * @param reset If true, clear the set of events tracked by the event object * before waiting. If false, do not clear the events. * @param timeout Waiting period for the desired set of events or one of the * special values K_NO_WAIT and K_FOREVER. * * @retval set of matching events upon success * @retval 0 if matching events were not received within the specified time */ __syscall uint32_t k_event_wait(struct k_event *event, uint32_t events, bool reset, k_timeout_t timeout); /** * @brief Wait for all of the specified events * * This routine waits on event object @a event until all of the specified * events have been delivered to the event object, or the maximum wait time * @a timeout has expired. A thread may wait on up to 32 distinctly numbered * events that are expressed as bits in a single 32-bit word. * * @note The caller must be careful when resetting if there are multiple threads * waiting for the event object @a event. * * @param event Address of the event object * @param events Set of desired events on which to wait * @param reset If true, clear the set of events tracked by the event object * before waiting. If false, do not clear the events. * @param timeout Waiting period for the desired set of events or one of the * special values K_NO_WAIT and K_FOREVER. * * @retval set of matching events upon success * @retval 0 if matching events were not received within the specified time */ __syscall uint32_t k_event_wait_all(struct k_event *event, uint32_t events, bool reset, k_timeout_t timeout); /** * @brief Test the events currently tracked in the event object * * @param event Address of the event object * @param events_mask Set of desired events to test * * @retval Current value of events in @a events_mask */ static inline uint32_t k_event_test(struct k_event *event, uint32_t events_mask) { return k_event_wait(event, events_mask, false, K_NO_WAIT); } /** * @brief Statically define and initialize an event object * * The event can be accessed outside the module where it is defined using: * * @code extern struct k_event ; @endcode * * @param name Name of the event object. */ #define K_EVENT_DEFINE(name) \ STRUCT_SECTION_ITERABLE(k_event, name) = \ Z_EVENT_INITIALIZER(name); /** @} */ struct k_fifo { struct k_queue _queue; #ifdef CONFIG_OBJ_CORE_FIFO struct k_obj_core obj_core; #endif }; /** * @cond INTERNAL_HIDDEN */ #define Z_FIFO_INITIALIZER(obj) \ { \ ._queue = Z_QUEUE_INITIALIZER(obj._queue) \ } /** * INTERNAL_HIDDEN @endcond */ /** * @defgroup fifo_apis FIFO APIs * @ingroup kernel_apis * @{ */ /** * @brief Initialize a FIFO queue. * * This routine initializes a FIFO queue, prior to its first use. * * @param fifo Address of the FIFO queue. */ #define k_fifo_init(fifo) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_fifo, init, fifo); \ k_queue_init(&(fifo)->_queue); \ K_OBJ_CORE_INIT(K_OBJ_CORE(fifo), _obj_type_fifo); \ K_OBJ_CORE_LINK(K_OBJ_CORE(fifo)); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_fifo, init, fifo); \ }) /** * @brief Cancel waiting on a FIFO queue. * * This routine causes first thread pending on @a fifo, if any, to * return from k_fifo_get() call with NULL value (as if timeout * expired). * * @funcprops \isr_ok * * @param fifo Address of the FIFO queue. */ #define k_fifo_cancel_wait(fifo) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_fifo, cancel_wait, fifo); \ k_queue_cancel_wait(&(fifo)->_queue); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_fifo, cancel_wait, fifo); \ }) /** * @brief Add an element to a FIFO queue. * * This routine adds a data item to @a fifo. A FIFO data item must be * aligned on a word boundary, and the first word of the item is reserved * for the kernel's use. * * @funcprops \isr_ok * * @param fifo Address of the FIFO. * @param data Address of the data item. */ #define k_fifo_put(fifo, data) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_fifo, put, fifo, data); \ k_queue_append(&(fifo)->_queue, data); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_fifo, put, fifo, data); \ }) /** * @brief Add an element to a FIFO queue. * * This routine adds a data item to @a fifo. There is an implicit memory * allocation to create an additional temporary bookkeeping data structure from * the calling thread's resource pool, which is automatically freed when the * item is removed. The data itself is not copied. * * @funcprops \isr_ok * * @param fifo Address of the FIFO. * @param data Address of the data item. * * @retval 0 on success * @retval -ENOMEM if there isn't sufficient RAM in the caller's resource pool */ #define k_fifo_alloc_put(fifo, data) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_fifo, alloc_put, fifo, data); \ int fap_ret = k_queue_alloc_append(&(fifo)->_queue, data); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_fifo, alloc_put, fifo, data, fap_ret); \ fap_ret; \ }) /** * @brief Atomically add a list of elements to a FIFO. * * This routine adds a list of data items to @a fifo in one operation. * The data items must be in a singly-linked list, with the first word of * each data item pointing to the next data item; the list must be * NULL-terminated. * * @funcprops \isr_ok * * @param fifo Address of the FIFO queue. * @param head Pointer to first node in singly-linked list. * @param tail Pointer to last node in singly-linked list. */ #define k_fifo_put_list(fifo, head, tail) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_fifo, put_list, fifo, head, tail); \ k_queue_append_list(&(fifo)->_queue, head, tail); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_fifo, put_list, fifo, head, tail); \ }) /** * @brief Atomically add a list of elements to a FIFO queue. * * This routine adds a list of data items to @a fifo in one operation. * The data items must be in a singly-linked list implemented using a * sys_slist_t object. Upon completion, the sys_slist_t object is invalid * and must be re-initialized via sys_slist_init(). * * @funcprops \isr_ok * * @param fifo Address of the FIFO queue. * @param list Pointer to sys_slist_t object. */ #define k_fifo_put_slist(fifo, list) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_fifo, put_slist, fifo, list); \ k_queue_merge_slist(&(fifo)->_queue, list); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_fifo, put_slist, fifo, list); \ }) /** * @brief Get an element from a FIFO queue. * * This routine removes a data item from @a fifo in a "first in, first out" * manner. The first word of the data item is reserved for the kernel's use. * * @note @a timeout must be set to K_NO_WAIT if called from ISR. * * @funcprops \isr_ok * * @param fifo Address of the FIFO queue. * @param timeout Waiting period to obtain a data item, * or one of the special values K_NO_WAIT and K_FOREVER. * * @return Address of the data item if successful; NULL if returned * without waiting, or waiting period timed out. */ #define k_fifo_get(fifo, timeout) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_fifo, get, fifo, timeout); \ void *fg_ret = k_queue_get(&(fifo)->_queue, timeout); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_fifo, get, fifo, timeout, fg_ret); \ fg_ret; \ }) /** * @brief Query a FIFO queue to see if it has data available. * * Note that the data might be already gone by the time this function returns * if other threads is also trying to read from the FIFO. * * @funcprops \isr_ok * * @param fifo Address of the FIFO queue. * * @return Non-zero if the FIFO queue is empty. * @return 0 if data is available. */ #define k_fifo_is_empty(fifo) \ k_queue_is_empty(&(fifo)->_queue) /** * @brief Peek element at the head of a FIFO queue. * * Return element from the head of FIFO queue without removing it. A usecase * for this is if elements of the FIFO object are themselves containers. Then * on each iteration of processing, a head container will be peeked, * and some data processed out of it, and only if the container is empty, * it will be completely remove from the FIFO queue. * * @param fifo Address of the FIFO queue. * * @return Head element, or NULL if the FIFO queue is empty. */ #define k_fifo_peek_head(fifo) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_fifo, peek_head, fifo); \ void *fph_ret = k_queue_peek_head(&(fifo)->_queue); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_fifo, peek_head, fifo, fph_ret); \ fph_ret; \ }) /** * @brief Peek element at the tail of FIFO queue. * * Return element from the tail of FIFO queue (without removing it). A usecase * for this is if elements of the FIFO queue are themselves containers. Then * it may be useful to add more data to the last container in a FIFO queue. * * @param fifo Address of the FIFO queue. * * @return Tail element, or NULL if a FIFO queue is empty. */ #define k_fifo_peek_tail(fifo) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_fifo, peek_tail, fifo); \ void *fpt_ret = k_queue_peek_tail(&(fifo)->_queue); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_fifo, peek_tail, fifo, fpt_ret); \ fpt_ret; \ }) /** * @brief Statically define and initialize a FIFO queue. * * The FIFO queue can be accessed outside the module where it is defined using: * * @code extern struct k_fifo ; @endcode * * @param name Name of the FIFO queue. */ #define K_FIFO_DEFINE(name) \ STRUCT_SECTION_ITERABLE(k_fifo, name) = \ Z_FIFO_INITIALIZER(name) /** @} */ struct k_lifo { struct k_queue _queue; #ifdef CONFIG_OBJ_CORE_LIFO struct k_obj_core obj_core; #endif }; /** * @cond INTERNAL_HIDDEN */ #define Z_LIFO_INITIALIZER(obj) \ { \ ._queue = Z_QUEUE_INITIALIZER(obj._queue) \ } /** * INTERNAL_HIDDEN @endcond */ /** * @defgroup lifo_apis LIFO APIs * @ingroup kernel_apis * @{ */ /** * @brief Initialize a LIFO queue. * * This routine initializes a LIFO queue object, prior to its first use. * * @param lifo Address of the LIFO queue. */ #define k_lifo_init(lifo) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_lifo, init, lifo); \ k_queue_init(&(lifo)->_queue); \ K_OBJ_CORE_INIT(K_OBJ_CORE(lifo), _obj_type_lifo); \ K_OBJ_CORE_LINK(K_OBJ_CORE(lifo)); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_lifo, init, lifo); \ }) /** * @brief Add an element to a LIFO queue. * * This routine adds a data item to @a lifo. A LIFO queue data item must be * aligned on a word boundary, and the first word of the item is * reserved for the kernel's use. * * @funcprops \isr_ok * * @param lifo Address of the LIFO queue. * @param data Address of the data item. */ #define k_lifo_put(lifo, data) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_lifo, put, lifo, data); \ k_queue_prepend(&(lifo)->_queue, data); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_lifo, put, lifo, data); \ }) /** * @brief Add an element to a LIFO queue. * * This routine adds a data item to @a lifo. There is an implicit memory * allocation to create an additional temporary bookkeeping data structure from * the calling thread's resource pool, which is automatically freed when the * item is removed. The data itself is not copied. * * @funcprops \isr_ok * * @param lifo Address of the LIFO. * @param data Address of the data item. * * @retval 0 on success * @retval -ENOMEM if there isn't sufficient RAM in the caller's resource pool */ #define k_lifo_alloc_put(lifo, data) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_lifo, alloc_put, lifo, data); \ int lap_ret = k_queue_alloc_prepend(&(lifo)->_queue, data); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_lifo, alloc_put, lifo, data, lap_ret); \ lap_ret; \ }) /** * @brief Get an element from a LIFO queue. * * This routine removes a data item from @a LIFO in a "last in, first out" * manner. The first word of the data item is reserved for the kernel's use. * * @note @a timeout must be set to K_NO_WAIT if called from ISR. * * @funcprops \isr_ok * * @param lifo Address of the LIFO queue. * @param timeout Waiting period to obtain a data item, * or one of the special values K_NO_WAIT and K_FOREVER. * * @return Address of the data item if successful; NULL if returned * without waiting, or waiting period timed out. */ #define k_lifo_get(lifo, timeout) \ ({ \ SYS_PORT_TRACING_OBJ_FUNC_ENTER(k_lifo, get, lifo, timeout); \ void *lg_ret = k_queue_get(&(lifo)->_queue, timeout); \ SYS_PORT_TRACING_OBJ_FUNC_EXIT(k_lifo, get, lifo, timeout, lg_ret); \ lg_ret; \ }) /** * @brief Statically define and initialize a LIFO queue. * * The LIFO queue can be accessed outside the module where it is defined using: * * @code extern struct k_lifo ; @endcode * * @param name Name of the fifo. */ #define K_LIFO_DEFINE(name) \ STRUCT_SECTION_ITERABLE(k_lifo, name) = \ Z_LIFO_INITIALIZER(name) /** @} */ /** * @cond INTERNAL_HIDDEN */ #define K_STACK_FLAG_ALLOC ((uint8_t)1) /* Buffer was allocated */ typedef uintptr_t stack_data_t; struct k_stack { _wait_q_t wait_q; struct k_spinlock lock; stack_data_t *base, *next, *top; uint8_t flags; SYS_PORT_TRACING_TRACKING_FIELD(k_stack) #ifdef CONFIG_OBJ_CORE_STACK struct k_obj_core obj_core; #endif }; #define Z_STACK_INITIALIZER(obj, stack_buffer, stack_num_entries) \ { \ .wait_q = Z_WAIT_Q_INIT(&obj.wait_q), \ .base = stack_buffer, \ .next = stack_buffer, \ .top = stack_buffer + stack_num_entries, \ } /** * INTERNAL_HIDDEN @endcond */ /** * @defgroup stack_apis Stack APIs * @ingroup kernel_apis * @{ */ /** * @brief Initialize a stack. * * This routine initializes a stack object, prior to its first use. * * @param stack Address of the stack. * @param buffer Address of array used to hold stacked values. * @param num_entries Maximum number of values that can be stacked. */ void k_stack_init(struct k_stack *stack, stack_data_t *buffer, uint32_t num_entries); /** * @brief Initialize a stack. * * This routine initializes a stack object, prior to its first use. Internal * buffers will be allocated from the calling thread's resource pool. * This memory will be released if k_stack_cleanup() is called, or * userspace is enabled and the stack object loses all references to it. * * @param stack Address of the stack. * @param num_entries Maximum number of values that can be stacked. * * @return -ENOMEM if memory couldn't be allocated */ __syscall int32_t k_stack_alloc_init(struct k_stack *stack, uint32_t num_entries); /** * @brief Release a stack's allocated buffer * * If a stack object was given a dynamically allocated buffer via * k_stack_alloc_init(), this will free it. This function does nothing * if the buffer wasn't dynamically allocated. * * @param stack Address of the stack. * @retval 0 on success * @retval -EAGAIN when object is still in use */ int k_stack_cleanup(struct k_stack *stack); /** * @brief Push an element onto a stack. * * This routine adds a stack_data_t value @a data to @a stack. * * @funcprops \isr_ok * * @param stack Address of the stack. * @param data Value to push onto the stack. * * @retval 0 on success * @retval -ENOMEM if stack is full */ __syscall int k_stack_push(struct k_stack *stack, stack_data_t data); /** * @brief Pop an element from a stack. * * This routine removes a stack_data_t value from @a stack in a "last in, * first out" manner and stores the value in @a data. * * @note @a timeout must be set to K_NO_WAIT if called from ISR. * * @funcprops \isr_ok * * @param stack Address of the stack. * @param data Address of area to hold the value popped from the stack. * @param timeout Waiting period to obtain a value, * or one of the special values K_NO_WAIT and * K_FOREVER. * * @retval 0 Element popped from stack. * @retval -EBUSY Returned without waiting. * @retval -EAGAIN Waiting period timed out. */ __syscall int k_stack_pop(struct k_stack *stack, stack_data_t *data, k_timeout_t timeout); /** * @brief Statically define and initialize a stack * * The stack can be accessed outside the module where it is defined using: * * @code extern struct k_stack ; @endcode * * @param name Name of the stack. * @param stack_num_entries Maximum number of values that can be stacked. */ #define K_STACK_DEFINE(name, stack_num_entries) \ stack_data_t __noinit \ _k_stack_buf_##name[stack_num_entries]; \ STRUCT_SECTION_ITERABLE(k_stack, name) = \ Z_STACK_INITIALIZER(name, _k_stack_buf_##name, \ stack_num_entries) /** @} */ /** * @cond INTERNAL_HIDDEN */ struct k_work; struct k_work_q; struct k_work_queue_config; extern struct k_work_q k_sys_work_q; /** * INTERNAL_HIDDEN @endcond */ /** * @defgroup mutex_apis Mutex APIs * @ingroup kernel_apis * @{ */ /** * Mutex Structure * @ingroup mutex_apis */ struct k_mutex { /** Mutex wait queue */ _wait_q_t wait_q; /** Mutex owner */ struct k_thread *owner; /** Current lock count */ uint32_t lock_count; /** Original thread priority */ int owner_orig_prio; SYS_PORT_TRACING_TRACKING_FIELD(k_mutex) #ifdef CONFIG_OBJ_CORE_MUTEX struct k_obj_core obj_core; #endif }; /** * @cond INTERNAL_HIDDEN */ #define Z_MUTEX_INITIALIZER(obj) \ { \ .wait_q = Z_WAIT_Q_INIT(&obj.wait_q), \ .owner = NULL, \ .lock_count = 0, \ .owner_orig_prio = K_LOWEST_APPLICATION_THREAD_PRIO, \ } /** * INTERNAL_HIDDEN @endcond */ /** * @brief Statically define and initialize a mutex. * * The mutex can be accessed outside the module where it is defined using: * * @code extern struct k_mutex ; @endcode * * @param name Name of the mutex. */ #define K_MUTEX_DEFINE(name) \ STRUCT_SECTION_ITERABLE(k_mutex, name) = \ Z_MUTEX_INITIALIZER(name) /** * @brief Initialize a mutex. * * This routine initializes a mutex object, prior to its first use. * * Upon completion, the mutex is available and does not have an owner. * * @param mutex Address of the mutex. * * @retval 0 Mutex object created * */ __syscall int k_mutex_init(struct k_mutex *mutex); /** * @brief Lock a mutex. * * This routine locks @a mutex. If the mutex is locked by another thread, * the calling thread waits until the mutex becomes available or until * a timeout occurs. * * A thread is permitted to lock a mutex it has already locked. The operation * completes immediately and the lock count is increased by 1. * * Mutexes may not be locked in ISRs. * * @param mutex Address of the mutex. * @param timeout Waiting period to lock the mutex, * or one of the special values K_NO_WAIT and * K_FOREVER. * * @retval 0 Mutex locked. * @retval -EBUSY Returned without waiting. * @retval -EAGAIN Waiting period timed out. */ __syscall int k_mutex_lock(struct k_mutex *mutex, k_timeout_t timeout); /** * @brief Unlock a mutex. * * This routine unlocks @a mutex. The mutex must already be locked by the * calling thread. * * The mutex cannot be claimed by another thread until it has been unlocked by * the calling thread as many times as it was previously locked by that * thread. * * Mutexes may not be unlocked in ISRs, as mutexes must only be manipulated * in thread context due to ownership and priority inheritance semantics. * * @param mutex Address of the mutex. * * @retval 0 Mutex unlocked. * @retval -EPERM The current thread does not own the mutex * @retval -EINVAL The mutex is not locked * */ __syscall int k_mutex_unlock(struct k_mutex *mutex); /** * @} */ struct k_condvar { _wait_q_t wait_q; #ifdef CONFIG_OBJ_CORE_CONDVAR struct k_obj_core obj_core; #endif }; #define Z_CONDVAR_INITIALIZER(obj) \ { \ .wait_q = Z_WAIT_Q_INIT(&obj.wait_q), \ } /** * @defgroup condvar_apis Condition Variables APIs * @ingroup kernel_apis * @{ */ /** * @brief Initialize a condition variable * * @param condvar pointer to a @p k_condvar structure * @retval 0 Condition variable created successfully */ __syscall int k_condvar_init(struct k_condvar *condvar); /** * @brief Signals one thread that is pending on the condition variable * * @param condvar pointer to a @p k_condvar structure * @retval 0 On success */ __syscall int k_condvar_signal(struct k_condvar *condvar); /** * @brief Unblock all threads that are pending on the condition * variable * * @param condvar pointer to a @p k_condvar structure * @return An integer with number of woken threads on success */ __syscall int k_condvar_broadcast(struct k_condvar *condvar); /** * @brief Waits on the condition variable releasing the mutex lock * * Atomically releases the currently owned mutex, blocks the current thread * waiting on the condition variable specified by @a condvar, * and finally acquires the mutex again. * * The waiting thread unblocks only after another thread calls * k_condvar_signal, or k_condvar_broadcast with the same condition variable. * * @param condvar pointer to a @p k_condvar structure * @param mutex Address of the mutex. * @param timeout Waiting period for the condition variable * or one of the special values K_NO_WAIT and K_FOREVER. * @retval 0 On success * @retval -EAGAIN Waiting period timed out. */ __syscall int k_condvar_wait(struct k_condvar *condvar, struct k_mutex *mutex, k_timeout_t timeout); /** * @brief Statically define and initialize a condition variable. * * The condition variable can be accessed outside the module where it is * defined using: * * @code extern struct k_condvar ; @endcode * * @param name Name of the condition variable. */ #define K_CONDVAR_DEFINE(name) \ STRUCT_SECTION_ITERABLE(k_condvar, name) = \ Z_CONDVAR_INITIALIZER(name) /** * @} */ /** * @cond INTERNAL_HIDDEN */ struct k_sem { _wait_q_t wait_q; unsigned int count; unsigned int limit; Z_DECL_POLL_EVENT SYS_PORT_TRACING_TRACKING_FIELD(k_sem) #ifdef CONFIG_OBJ_CORE_SEM struct k_obj_core obj_core; #endif }; #define Z_SEM_INITIALIZER(obj, initial_count, count_limit) \ { \ .wait_q = Z_WAIT_Q_INIT(&obj.wait_q), \ .count = initial_count, \ .limit = count_limit, \ Z_POLL_EVENT_OBJ_INIT(obj) \ } /** * INTERNAL_HIDDEN @endcond */ /** * @defgroup semaphore_apis Semaphore APIs * @ingroup kernel_apis * @{ */ /** * @brief Maximum limit value allowed for a semaphore. * * This is intended for use when a semaphore does not have * an explicit maximum limit, and instead is just used for * counting purposes. * */ #define K_SEM_MAX_LIMIT UINT_MAX /** * @brief Initialize a semaphore. * * This routine initializes a semaphore object, prior to its first use. * * @param sem Address of the semaphore. * @param initial_count Initial semaphore count. * @param limit Maximum permitted semaphore count. * * @see K_SEM_MAX_LIMIT * * @retval 0 Semaphore created successfully * @retval -EINVAL Invalid values * */ __syscall int k_sem_init(struct k_sem *sem, unsigned int initial_count, unsigned int limit); /** * @brief Take a semaphore. * * This routine takes @a sem. * * @note @a timeout must be set to K_NO_WAIT if called from ISR. * * @funcprops \isr_ok * * @param sem Address of the semaphore. * @param timeout Waiting period to take the semaphore, * or one of the special values K_NO_WAIT and K_FOREVER. * * @retval 0 Semaphore taken. * @retval -EBUSY Returned without waiting. * @retval -EAGAIN Waiting period timed out, * or the semaphore was reset during the waiting period. */ __syscall int k_sem_take(struct k_sem *sem, k_timeout_t timeout); /** * @brief Give a semaphore. * * This routine gives @a sem, unless the semaphore is already at its maximum * permitted count. * * @funcprops \isr_ok * * @param sem Address of the semaphore. */ __syscall void k_sem_give(struct k_sem *sem); /** * @brief Resets a semaphore's count to zero. * * This routine sets the count of @a sem to zero. * Any outstanding semaphore takes will be aborted * with -EAGAIN. * * @param sem Address of the semaphore. */ __syscall void k_sem_reset(struct k_sem *sem); /** * @brief Get a semaphore's count. * * This routine returns the current count of @a sem. * * @param sem Address of the semaphore. * * @return Current semaphore count. */ __syscall unsigned int k_sem_count_get(struct k_sem *sem); /** * @internal */ static inline unsigned int z_impl_k_sem_count_get(struct k_sem *sem) { return sem->count; } /** * @brief Statically define and initialize a semaphore. * * The semaphore can be accessed outside the module where it is defined using: * * @code extern struct k_sem ; @endcode * * @param name Name of the semaphore. * @param initial_count Initial semaphore count. * @param count_limit Maximum permitted semaphore count. */ #define K_SEM_DEFINE(name, initial_count, count_limit) \ STRUCT_SECTION_ITERABLE(k_sem, name) = \ Z_SEM_INITIALIZER(name, initial_count, count_limit); \ BUILD_ASSERT(((count_limit) != 0) && \ ((initial_count) <= (count_limit)) && \ ((count_limit) <= K_SEM_MAX_LIMIT)); /** @} */ /** * @cond INTERNAL_HIDDEN */ struct k_work_delayable; struct k_work_sync; /** * INTERNAL_HIDDEN @endcond */ /** * @defgroup workqueue_apis Work Queue APIs * @ingroup kernel_apis * @{ */ /** @brief The signature for a work item handler function. * * The function will be invoked by the thread animating a work queue. * * @param work the work item that provided the handler. */ typedef void (*k_work_handler_t)(struct k_work *work); /** @brief Initialize a (non-delayable) work structure. * * This must be invoked before submitting a work structure for the first time. * It need not be invoked again on the same work structure. It can be * re-invoked to change the associated handler, but this must be done when the * work item is idle. * * @funcprops \isr_ok * * @param work the work structure to be initialized. * * @param handler the handler to be invoked by the work item. */ void k_work_init(struct k_work *work, k_work_handler_t handler); /** @brief Busy state flags from the work item. * * A zero return value indicates the work item appears to be idle. * * @note This is a live snapshot of state, which may change before the result * is checked. Use locks where appropriate. * * @funcprops \isr_ok * * @param work pointer to the work item. * * @return a mask of flags K_WORK_DELAYED, K_WORK_QUEUED, * K_WORK_RUNNING, K_WORK_CANCELING, and K_WORK_FLUSHING. */ int k_work_busy_get(const struct k_work *work); /** @brief Test whether a work item is currently pending. * * Wrapper to determine whether a work item is in a non-idle dstate. * * @note This is a live snapshot of state, which may change before the result * is checked. Use locks where appropriate. * * @funcprops \isr_ok * * @param work pointer to the work item. * * @return true if and only if k_work_busy_get() returns a non-zero value. */ static inline bool k_work_is_pending(const struct k_work *work); /** @brief Submit a work item to a queue. * * @param queue pointer to the work queue on which the item should run. If * NULL the queue from the most recent submission will be used. * * @funcprops \isr_ok * * @param work pointer to the work item. * * @retval 0 if work was already submitted to a queue * @retval 1 if work was not submitted and has been queued to @p queue * @retval 2 if work was running and has been queued to the queue that was * running it * @retval -EBUSY * * if work submission was rejected because the work item is cancelling; or * * @p queue is draining; or * * @p queue is plugged. * @retval -EINVAL if @p queue is null and the work item has never been run. * @retval -ENODEV if @p queue has not been started. */ int k_work_submit_to_queue(struct k_work_q *queue, struct k_work *work); /** @brief Submit a work item to the system queue. * * @funcprops \isr_ok * * @param work pointer to the work item. * * @return as with k_work_submit_to_queue(). */ int k_work_submit(struct k_work *work); /** @brief Wait for last-submitted instance to complete. * * Resubmissions may occur while waiting, including chained submissions (from * within the handler). * * @note Be careful of caller and work queue thread relative priority. If * this function sleeps it will not return until the work queue thread * completes the tasks that allow this thread to resume. * * @note Behavior is undefined if this function is invoked on @p work from a * work queue running @p work. * * @param work pointer to the work item. * * @param sync pointer to an opaque item containing state related to the * pending cancellation. The object must persist until the call returns, and * be accessible from both the caller thread and the work queue thread. The * object must not be used for any other flush or cancel operation until this * one completes. On architectures with CONFIG_KERNEL_COHERENCE the object * must be allocated in coherent memory. * * @retval true if call had to wait for completion * @retval false if work was already idle */ bool k_work_flush(struct k_work *work, struct k_work_sync *sync); /** @brief Cancel a work item. * * This attempts to prevent a pending (non-delayable) work item from being * processed by removing it from the work queue. If the item is being * processed, the work item will continue to be processed, but resubmissions * are rejected until cancellation completes. * * If this returns zero cancellation is complete, otherwise something * (probably a work queue thread) is still referencing the item. * * See also k_work_cancel_sync(). * * @funcprops \isr_ok * * @param work pointer to the work item. * * @return the k_work_busy_get() status indicating the state of the item after all * cancellation steps performed by this call are completed. */ int k_work_cancel(struct k_work *work); /** @brief Cancel a work item and wait for it to complete. * * Same as k_work_cancel() but does not return until cancellation is complete. * This can be invoked by a thread after k_work_cancel() to synchronize with a * previous cancellation. * * On return the work structure will be idle unless something submits it after * the cancellation was complete. * * @note Be careful of caller and work queue thread relative priority. If * this function sleeps it will not return until the work queue thread * completes the tasks that allow this thread to resume. * * @note Behavior is undefined if this function is invoked on @p work from a * work queue running @p work. * * @param work pointer to the work item. * * @param sync pointer to an opaque item containing state related to the * pending cancellation. The object must persist until the call returns, and * be accessible from both the caller thread and the work queue thread. The * object must not be used for any other flush or cancel operation until this * one completes. On architectures with CONFIG_KERNEL_COHERENCE the object * must be allocated in coherent memory. * * @retval true if work was pending (call had to wait for cancellation of a * running handler to complete, or scheduled or submitted operations were * cancelled); * @retval false otherwise */ bool k_work_cancel_sync(struct k_work *work, struct k_work_sync *sync); /** @brief Initialize a work queue structure. * * This must be invoked before starting a work queue structure for the first time. * It need not be invoked again on the same work queue structure. * * @funcprops \isr_ok * * @param queue the queue structure to be initialized. */ void k_work_queue_init(struct k_work_q *queue); /** @brief Initialize a work queue. * * This configures the work queue thread and starts it running. The function * should not be re-invoked on a queue. * * @param queue pointer to the queue structure. It must be initialized * in zeroed/bss memory or with @ref k_work_queue_init before * use. * * @param stack pointer to the work thread stack area. * * @param stack_size size of the the work thread stack area, in bytes. * * @param prio initial thread priority * * @param cfg optional additional configuration parameters. Pass @c * NULL if not required, to use the defaults documented in * k_work_queue_config. */ void k_work_queue_start(struct k_work_q *queue, k_thread_stack_t *stack, size_t stack_size, int prio, const struct k_work_queue_config *cfg); /** @brief Access the thread that animates a work queue. * * This is necessary to grant a work queue thread access to things the work * items it will process are expected to use. * * @param queue pointer to the queue structure. * * @return the thread associated with the work queue. */ static inline k_tid_t k_work_queue_thread_get(struct k_work_q *queue); /** @brief Wait until the work queue has drained, optionally plugging it. * * This blocks submission to the work queue except when coming from queue * thread, and blocks the caller until no more work items are available in the * queue. * * If @p plug is true then submission will continue to be blocked after the * drain operation completes until k_work_queue_unplug() is invoked. * * Note that work items that are delayed are not yet associated with their * work queue. They must be cancelled externally if a goal is to ensure the * work queue remains empty. The @p plug feature can be used to prevent * delayed items from being submitted after the drain completes. * * @param queue pointer to the queue structure. * * @param plug if true the work queue will continue to block new submissions * after all items have drained. * * @retval 1 if call had to wait for the drain to complete * @retval 0 if call did not have to wait * @retval negative if wait was interrupted or failed */ int k_work_queue_drain(struct k_work_q *queue, bool plug); /** @brief Release a work queue to accept new submissions. * * This releases the block on new submissions placed when k_work_queue_drain() * is invoked with the @p plug option enabled. If this is invoked before the * drain completes new items may be submitted as soon as the drain completes. * * @funcprops \isr_ok * * @param queue pointer to the queue structure. * * @retval 0 if successfully unplugged * @retval -EALREADY if the work queue was not plugged. */ int k_work_queue_unplug(struct k_work_q *queue); /** @brief Initialize a delayable work structure. * * This must be invoked before scheduling a delayable work structure for the * first time. It need not be invoked again on the same work structure. It * can be re-invoked to change the associated handler, but this must be done * when the work item is idle. * * @funcprops \isr_ok * * @param dwork the delayable work structure to be initialized. * * @param handler the handler to be invoked by the work item. */ void k_work_init_delayable(struct k_work_delayable *dwork, k_work_handler_t handler); /** * @brief Get the parent delayable work structure from a work pointer. * * This function is necessary when a @c k_work_handler_t function is passed to * k_work_schedule_for_queue() and the handler needs to access data from the * container of the containing `k_work_delayable`. * * @param work Address passed to the work handler * * @return Address of the containing @c k_work_delayable structure. */ static inline struct k_work_delayable * k_work_delayable_from_work(struct k_work *work); /** @brief Busy state flags from the delayable work item. * * @funcprops \isr_ok * * @note This is a live snapshot of state, which may change before the result * can be inspected. Use locks where appropriate. * * @param dwork pointer to the delayable work item. * * @return a mask of flags K_WORK_DELAYED, K_WORK_QUEUED, K_WORK_RUNNING, * K_WORK_CANCELING, and K_WORK_FLUSHING. A zero return value indicates the * work item appears to be idle. */ int k_work_delayable_busy_get(const struct k_work_delayable *dwork); /** @brief Test whether a delayed work item is currently pending. * * Wrapper to determine whether a delayed work item is in a non-idle state. * * @note This is a live snapshot of state, which may change before the result * can be inspected. Use locks where appropriate. * * @funcprops \isr_ok * * @param dwork pointer to the delayable work item. * * @return true if and only if k_work_delayable_busy_get() returns a non-zero * value. */ static inline bool k_work_delayable_is_pending( const struct k_work_delayable *dwork); /** @brief Get the absolute tick count at which a scheduled delayable work * will be submitted. * * @note This is a live snapshot of state, which may change before the result * can be inspected. Use locks where appropriate. * * @funcprops \isr_ok * * @param dwork pointer to the delayable work item. * * @return the tick count when the timer that will schedule the work item will * expire, or the current tick count if the work is not scheduled. */ static inline k_ticks_t k_work_delayable_expires_get( const struct k_work_delayable *dwork); /** @brief Get the number of ticks until a scheduled delayable work will be * submitted. * * @note This is a live snapshot of state, which may change before the result * can be inspected. Use locks where appropriate. * * @funcprops \isr_ok * * @param dwork pointer to the delayable work item. * * @return the number of ticks until the timer that will schedule the work * item will expire, or zero if the item is not scheduled. */ static inline k_ticks_t k_work_delayable_remaining_get( const struct k_work_delayable *dwork); /** @brief Submit an idle work item to a queue after a delay. * * Unlike k_work_reschedule_for_queue() this is a no-op if the work item is * already scheduled or submitted, even if @p delay is @c K_NO_WAIT. * * @funcprops \isr_ok * * @param queue the queue on which the work item should be submitted after the * delay. * * @param dwork pointer to the delayable work item. * * @param delay the time to wait before submitting the work item. If @c * K_NO_WAIT and the work is not pending this is equivalent to * k_work_submit_to_queue(). * * @retval 0 if work was already scheduled or submitted. * @retval 1 if work has been scheduled. * @retval -EBUSY if @p delay is @c K_NO_WAIT and * k_work_submit_to_queue() fails with this code. * @retval -EINVAL if @p delay is @c K_NO_WAIT and * k_work_submit_to_queue() fails with this code. * @retval -ENODEV if @p delay is @c K_NO_WAIT and * k_work_submit_to_queue() fails with this code. */ int k_work_schedule_for_queue(struct k_work_q *queue, struct k_work_delayable *dwork, k_timeout_t delay); /** @brief Submit an idle work item to the system work queue after a * delay. * * This is a thin wrapper around k_work_schedule_for_queue(), with all the API * characteristics of that function. * * @param dwork pointer to the delayable work item. * * @param delay the time to wait before submitting the work item. If @c * K_NO_WAIT this is equivalent to k_work_submit_to_queue(). * * @return as with k_work_schedule_for_queue(). */ int k_work_schedule(struct k_work_delayable *dwork, k_timeout_t delay); /** @brief Reschedule a work item to a queue after a delay. * * Unlike k_work_schedule_for_queue() this function can change the deadline of * a scheduled work item, and will schedule a work item that is in any state * (e.g. is idle, submitted, or running). This function does not affect * ("unsubmit") a work item that has been submitted to a queue. * * @funcprops \isr_ok * * @param queue the queue on which the work item should be submitted after the * delay. * * @param dwork pointer to the delayable work item. * * @param delay the time to wait before submitting the work item. If @c * K_NO_WAIT this is equivalent to k_work_submit_to_queue() after canceling * any previous scheduled submission. * * @note If delay is @c K_NO_WAIT ("no delay") the return values are as with * k_work_submit_to_queue(). * * @retval 0 if delay is @c K_NO_WAIT and work was already on a queue * @retval 1 if * * delay is @c K_NO_WAIT and work was not submitted but has now been queued * to @p queue; or * * delay not @c K_NO_WAIT and work has been scheduled * @retval 2 if delay is @c K_NO_WAIT and work was running and has been queued * to the queue that was running it * @retval -EBUSY if @p delay is @c K_NO_WAIT and * k_work_submit_to_queue() fails with this code. * @retval -EINVAL if @p delay is @c K_NO_WAIT and * k_work_submit_to_queue() fails with this code. * @retval -ENODEV if @p delay is @c K_NO_WAIT and * k_work_submit_to_queue() fails with this code. */ int k_work_reschedule_for_queue(struct k_work_q *queue, struct k_work_delayable *dwork, k_timeout_t delay); /** @brief Reschedule a work item to the system work queue after a * delay. * * This is a thin wrapper around k_work_reschedule_for_queue(), with all the * API characteristics of that function. * * @param dwork pointer to the delayable work item. * * @param delay the time to wait before submitting the work item. * * @return as with k_work_reschedule_for_queue(). */ int k_work_reschedule(struct k_work_delayable *dwork, k_timeout_t delay); /** @brief Flush delayable work. * * If the work is scheduled, it is immediately submitted. Then the caller * blocks until the work completes, as with k_work_flush(). * * @note Be careful of caller and work queue thread relative priority. If * this function sleeps it will not return until the work queue thread * completes the tasks that allow this thread to resume. * * @note Behavior is undefined if this function is invoked on @p dwork from a * work queue running @p dwork. * * @param dwork pointer to the delayable work item. * * @param sync pointer to an opaque item containing state related to the * pending cancellation. The object must persist until the call returns, and * be accessible from both the caller thread and the work queue thread. The * object must not be used for any other flush or cancel operation until this * one completes. On architectures with CONFIG_KERNEL_COHERENCE the object * must be allocated in coherent memory. * * @retval true if call had to wait for completion * @retval false if work was already idle */ bool k_work_flush_delayable(struct k_work_delayable *dwork, struct k_work_sync *sync); /** @brief Cancel delayable work. * * Similar to k_work_cancel() but for delayable work. If the work is * scheduled or submitted it is canceled. This function does not wait for the * cancellation to complete. * * @note The work may still be running when this returns. Use * k_work_flush_delayable() or k_work_cancel_delayable_sync() to ensure it is * not running. * * @note Canceling delayable work does not prevent rescheduling it. It does * prevent submitting it until the cancellation completes. * * @funcprops \isr_ok * * @param dwork pointer to the delayable work item. * * @return the k_work_delayable_busy_get() status indicating the state of the * item after all cancellation steps performed by this call are completed. */ int k_work_cancel_delayable(struct k_work_delayable *dwork); /** @brief Cancel delayable work and wait. * * Like k_work_cancel_delayable() but waits until the work becomes idle. * * @note Canceling delayable work does not prevent rescheduling it. It does * prevent submitting it until the cancellation completes. * * @note Be careful of caller and work queue thread relative priority. If * this function sleeps it will not return until the work queue thread * completes the tasks that allow this thread to resume. * * @note Behavior is undefined if this function is invoked on @p dwork from a * work queue running @p dwork. * * @param dwork pointer to the delayable work item. * * @param sync pointer to an opaque item containing state related to the * pending cancellation. The object must persist until the call returns, and * be accessible from both the caller thread and the work queue thread. The * object must not be used for any other flush or cancel operation until this * one completes. On architectures with CONFIG_KERNEL_COHERENCE the object * must be allocated in coherent memory. * * @retval true if work was not idle (call had to wait for cancellation of a * running handler to complete, or scheduled or submitted operations were * cancelled); * @retval false otherwise */ bool k_work_cancel_delayable_sync(struct k_work_delayable *dwork, struct k_work_sync *sync); enum { /** * @cond INTERNAL_HIDDEN */ /* The atomic API is used for all work and queue flags fields to * enforce sequential consistency in SMP environments. */ /* Bits that represent the work item states. At least nine of the * combinations are distinct valid stable states. */ K_WORK_RUNNING_BIT = 0, K_WORK_CANCELING_BIT = 1, K_WORK_QUEUED_BIT = 2, K_WORK_DELAYED_BIT = 3, K_WORK_FLUSHING_BIT = 4, K_WORK_MASK = BIT(K_WORK_DELAYED_BIT) | BIT(K_WORK_QUEUED_BIT) | BIT(K_WORK_RUNNING_BIT) | BIT(K_WORK_CANCELING_BIT) | BIT(K_WORK_FLUSHING_BIT), /* Static work flags */ K_WORK_DELAYABLE_BIT = 8, K_WORK_DELAYABLE = BIT(K_WORK_DELAYABLE_BIT), /* Dynamic work queue flags */ K_WORK_QUEUE_STARTED_BIT = 0, K_WORK_QUEUE_STARTED = BIT(K_WORK_QUEUE_STARTED_BIT), K_WORK_QUEUE_BUSY_BIT = 1, K_WORK_QUEUE_BUSY = BIT(K_WORK_QUEUE_BUSY_BIT), K_WORK_QUEUE_DRAIN_BIT = 2, K_WORK_QUEUE_DRAIN = BIT(K_WORK_QUEUE_DRAIN_BIT), K_WORK_QUEUE_PLUGGED_BIT = 3, K_WORK_QUEUE_PLUGGED = BIT(K_WORK_QUEUE_PLUGGED_BIT), /* Static work queue flags */ K_WORK_QUEUE_NO_YIELD_BIT = 8, K_WORK_QUEUE_NO_YIELD = BIT(K_WORK_QUEUE_NO_YIELD_BIT), /** * INTERNAL_HIDDEN @endcond */ /* Transient work flags */ /** @brief Flag indicating a work item that is running under a work * queue thread. * * Accessed via k_work_busy_get(). May co-occur with other flags. */ K_WORK_RUNNING = BIT(K_WORK_RUNNING_BIT), /** @brief Flag indicating a work item that is being canceled. * * Accessed via k_work_busy_get(). May co-occur with other flags. */ K_WORK_CANCELING = BIT(K_WORK_CANCELING_BIT), /** @brief Flag indicating a work item that has been submitted to a * queue but has not started running. * * Accessed via k_work_busy_get(). May co-occur with other flags. */ K_WORK_QUEUED = BIT(K_WORK_QUEUED_BIT), /** @brief Flag indicating a delayed work item that is scheduled for * submission to a queue. * * Accessed via k_work_busy_get(). May co-occur with other flags. */ K_WORK_DELAYED = BIT(K_WORK_DELAYED_BIT), /** @brief Flag indicating a synced work item that is being flushed. * * Accessed via k_work_busy_get(). May co-occur with other flags. */ K_WORK_FLUSHING = BIT(K_WORK_FLUSHING_BIT), }; /** @brief A structure used to submit work. */ struct k_work { /* All fields are protected by the work module spinlock. No fields * are to be accessed except through kernel API. */ /* Node to link into k_work_q pending list. */ sys_snode_t node; /* The function to be invoked by the work queue thread. */ k_work_handler_t handler; /* The queue on which the work item was last submitted. */ struct k_work_q *queue; /* State of the work item. * * The item can be DELAYED, QUEUED, and RUNNING simultaneously. * * It can be RUNNING and CANCELING simultaneously. */ uint32_t flags; }; #define Z_WORK_INITIALIZER(work_handler) { \ .handler = work_handler, \ } /** @brief A structure used to submit work after a delay. */ struct k_work_delayable { /* The work item. */ struct k_work work; /* Timeout used to submit work after a delay. */ struct _timeout timeout; /* The queue to which the work should be submitted. */ struct k_work_q *queue; }; #define Z_WORK_DELAYABLE_INITIALIZER(work_handler) { \ .work = { \ .handler = work_handler, \ .flags = K_WORK_DELAYABLE, \ }, \ } /** * @brief Initialize a statically-defined delayable work item. * * This macro can be used to initialize a statically-defined delayable * work item, prior to its first use. For example, * * @code static K_WORK_DELAYABLE_DEFINE(, ); @endcode * * Note that if the runtime dependencies support initialization with * k_work_init_delayable() using that will eliminate the initialized * object in ROM that is produced by this macro and copied in at * system startup. * * @param work Symbol name for delayable work item object * @param work_handler Function to invoke each time work item is processed. */ #define K_WORK_DELAYABLE_DEFINE(work, work_handler) \ struct k_work_delayable work \ = Z_WORK_DELAYABLE_INITIALIZER(work_handler) /** * @cond INTERNAL_HIDDEN */ /* Record used to wait for work to flush. * * The work item is inserted into the queue that will process (or is * processing) the item, and will be processed as soon as the item * completes. When the flusher is processed the semaphore will be * signaled, releasing the thread waiting for the flush. */ struct z_work_flusher { struct k_work work; struct k_sem sem; }; /* Record used to wait for work to complete a cancellation. * * The work item is inserted into a global queue of pending cancels. * When a cancelling work item goes idle any matching waiters are * removed from pending_cancels and are woken. */ struct z_work_canceller { sys_snode_t node; struct k_work *work; struct k_sem sem; }; /** * INTERNAL_HIDDEN @endcond */ /** @brief A structure holding internal state for a pending synchronous * operation on a work item or queue. * * Instances of this type are provided by the caller for invocation of * k_work_flush(), k_work_cancel_sync() and sibling flush and cancel APIs. A * referenced object must persist until the call returns, and be accessible * from both the caller thread and the work queue thread. * * @note If CONFIG_KERNEL_COHERENCE is enabled the object must be allocated in * coherent memory; see arch_mem_coherent(). The stack on these architectures * is generally not coherent. be stack-allocated. Violations are detected by * runtime assertion. */ struct k_work_sync { union { struct z_work_flusher flusher; struct z_work_canceller canceller; }; }; /** @brief A structure holding optional configuration items for a work * queue. * * This structure, and values it references, are not retained by * k_work_queue_start(). */ struct k_work_queue_config { /** The name to be given to the work queue thread. * * If left null the thread will not have a name. */ const char *name; /** Control whether the work queue thread should yield between * items. * * Yielding between items helps guarantee the work queue * thread does not starve other threads, including cooperative * ones released by a work item. This is the default behavior. * * Set this to @c true to prevent the work queue thread from * yielding between items. This may be appropriate when a * sequence of items should complete without yielding * control. */ bool no_yield; }; /** @brief A structure used to hold work until it can be processed. */ struct k_work_q { /* The thread that animates the work. */ struct k_thread thread; /* All the following fields must be accessed only while the * work module spinlock is held. */ /* List of k_work items to be worked. */ sys_slist_t pending; /* Wait queue for idle work thread. */ _wait_q_t notifyq; /* Wait queue for threads waiting for the queue to drain. */ _wait_q_t drainq; /* Flags describing queue state. */ uint32_t flags; }; /* Provide the implementation for inline functions declared above */ static inline bool k_work_is_pending(const struct k_work *work) { return k_work_busy_get(work) != 0; } static inline struct k_work_delayable * k_work_delayable_from_work(struct k_work *work) { return CONTAINER_OF(work, struct k_work_delayable, work); } static inline bool k_work_delayable_is_pending( const struct k_work_delayable *dwork) { return k_work_delayable_busy_get(dwork) != 0; } static inline k_ticks_t k_work_delayable_expires_get( const struct k_work_delayable *dwork) { return z_timeout_expires(&dwork->timeout); } static inline k_ticks_t k_work_delayable_remaining_get( const struct k_work_delayable *dwork) { return z_timeout_remaining(&dwork->timeout); } static inline k_tid_t k_work_queue_thread_get(struct k_work_q *queue) { return &queue->thread; } /** @} */ struct k_work_user; /** * @addtogroup workqueue_apis * @{ */ /** * @typedef k_work_user_handler_t * @brief Work item handler function type for user work queues. * * A work item's handler function is executed by a user workqueue's thread * when the work item is processed by the workqueue. * * @param work Address of the work item. */ typedef void (*k_work_user_handler_t)(struct k_work_user *work); /** * @cond INTERNAL_HIDDEN */ struct k_work_user_q { struct k_queue queue; struct k_thread thread; }; enum { K_WORK_USER_STATE_PENDING, /* Work item pending state */ }; struct k_work_user { void *_reserved; /* Used by k_queue implementation. */ k_work_user_handler_t handler; atomic_t flags; }; /** * INTERNAL_HIDDEN @endcond */ #if defined(__cplusplus) && ((__cplusplus - 0) < 202002L) #define Z_WORK_USER_INITIALIZER(work_handler) { NULL, work_handler, 0 } #else #define Z_WORK_USER_INITIALIZER(work_handler) \ { \ ._reserved = NULL, \ .handler = work_handler, \ .flags = 0 \ } #endif /** * @brief Initialize a statically-defined user work item. * * This macro can be used to initialize a statically-defined user work * item, prior to its first use. For example, * * @code static K_WORK_USER_DEFINE(, ); @endcode * * @param work Symbol name for work item object * @param work_handler Function to invoke each time work item is processed. */ #define K_WORK_USER_DEFINE(work, work_handler) \ struct k_work_user work = Z_WORK_USER_INITIALIZER(work_handler) /** * @brief Initialize a userspace work item. * * This routine initializes a user workqueue work item, prior to its * first use. * * @param work Address of work item. * @param handler Function to invoke each time work item is processed. */ static inline void k_work_user_init(struct k_work_user *work, k_work_user_handler_t handler) { *work = (struct k_work_user)Z_WORK_USER_INITIALIZER(handler); } /** * @brief Check if a userspace work item is pending. * * This routine indicates if user work item @a work is pending in a workqueue's * queue. * * @note Checking if the work is pending gives no guarantee that the * work will still be pending when this information is used. It is up to * the caller to make sure that this information is used in a safe manner. * * @funcprops \isr_ok * * @param work Address of work item. * * @return true if work item is pending, or false if it is not pending. */ static inline bool k_work_user_is_pending(struct k_work_user *work) { return atomic_test_bit(&work->flags, K_WORK_USER_STATE_PENDING); } /** * @brief Submit a work item to a user mode workqueue * * Submits a work item to a workqueue that runs in user mode. A temporary * memory allocation is made from the caller's resource pool which is freed * once the worker thread consumes the k_work item. The workqueue * thread must have memory access to the k_work item being submitted. The caller * must have permission granted on the work_q parameter's queue object. * * @funcprops \isr_ok * * @param work_q Address of workqueue. * @param work Address of work item. * * @retval -EBUSY if the work item was already in some workqueue * @retval -ENOMEM if no memory for thread resource pool allocation * @retval 0 Success */ static inline int k_work_user_submit_to_queue(struct k_work_user_q *work_q, struct k_work_user *work) { int ret = -EBUSY; if (!atomic_test_and_set_bit(&work->flags, K_WORK_USER_STATE_PENDING)) { ret = k_queue_alloc_append(&work_q->queue, work); /* Couldn't insert into the queue. Clear the pending bit * so the work item can be submitted again */ if (ret != 0) { atomic_clear_bit(&work->flags, K_WORK_USER_STATE_PENDING); } } return ret; } /** * @brief Start a workqueue in user mode * * This works identically to k_work_queue_start() except it is callable from * user mode, and the worker thread created will run in user mode. The caller * must have permissions granted on both the work_q parameter's thread and * queue objects, and the same restrictions on priority apply as * k_thread_create(). * * @param work_q Address of workqueue. * @param stack Pointer to work queue thread's stack space, as defined by * K_THREAD_STACK_DEFINE() * @param stack_size Size of the work queue thread's stack (in bytes), which * should either be the same constant passed to * K_THREAD_STACK_DEFINE() or the value of K_THREAD_STACK_SIZEOF(). * @param prio Priority of the work queue's thread. * @param name optional thread name. If not null a copy is made into the * thread's name buffer. */ void k_work_user_queue_start(struct k_work_user_q *work_q, k_thread_stack_t *stack, size_t stack_size, int prio, const char *name); /** * @brief Access the user mode thread that animates a work queue. * * This is necessary to grant a user mode work queue thread access to things * the work items it will process are expected to use. * * @param work_q pointer to the user mode queue structure. * * @return the user mode thread associated with the work queue. */ static inline k_tid_t k_work_user_queue_thread_get(struct k_work_user_q *work_q) { return &work_q->thread; } /** @} */ /** * @cond INTERNAL_HIDDEN */ struct k_work_poll { struct k_work work; struct k_work_q *workq; struct z_poller poller; struct k_poll_event *events; int num_events; k_work_handler_t real_handler; struct _timeout timeout; int poll_result; }; /** * INTERNAL_HIDDEN @endcond */ /** * @addtogroup workqueue_apis * @{ */ /** * @brief Initialize a statically-defined work item. * * This macro can be used to initialize a statically-defined workqueue work * item, prior to its first use. For example, * * @code static K_WORK_DEFINE(, ); @endcode * * @param work Symbol name for work item object * @param work_handler Function to invoke each time work item is processed. */ #define K_WORK_DEFINE(work, work_handler) \ struct k_work work = Z_WORK_INITIALIZER(work_handler) /** * @brief Initialize a triggered work item. * * This routine initializes a workqueue triggered work item, prior to * its first use. * * @param work Address of triggered work item. * @param handler Function to invoke each time work item is processed. */ void k_work_poll_init(struct k_work_poll *work, k_work_handler_t handler); /** * @brief Submit a triggered work item. * * This routine schedules work item @a work to be processed by workqueue * @a work_q when one of the given @a events is signaled. The routine * initiates internal poller for the work item and then returns to the caller. * Only when one of the watched events happen the work item is actually * submitted to the workqueue and becomes pending. * * Submitting a previously submitted triggered work item that is still * waiting for the event cancels the existing submission and reschedules it * the using the new event list. Note that this behavior is inherently subject * to race conditions with the pre-existing triggered work item and work queue, * so care must be taken to synchronize such resubmissions externally. * * @funcprops \isr_ok * * @warning * Provided array of events as well as a triggered work item must be placed * in persistent memory (valid until work handler execution or work * cancellation) and cannot be modified after submission. * * @param work_q Address of workqueue. * @param work Address of delayed work item. * @param events An array of events which trigger the work. * @param num_events The number of events in the array. * @param timeout Timeout after which the work will be scheduled * for execution even if not triggered. * * * @retval 0 Work item started watching for events. * @retval -EINVAL Work item is being processed or has completed its work. * @retval -EADDRINUSE Work item is pending on a different workqueue. */ int k_work_poll_submit_to_queue(struct k_work_q *work_q, struct k_work_poll *work, struct k_poll_event *events, int num_events, k_timeout_t timeout); /** * @brief Submit a triggered work item to the system workqueue. * * This routine schedules work item @a work to be processed by system * workqueue when one of the given @a events is signaled. The routine * initiates internal poller for the work item and then returns to the caller. * Only when one of the watched events happen the work item is actually * submitted to the workqueue and becomes pending. * * Submitting a previously submitted triggered work item that is still * waiting for the event cancels the existing submission and reschedules it * the using the new event list. Note that this behavior is inherently subject * to race conditions with the pre-existing triggered work item and work queue, * so care must be taken to synchronize such resubmissions externally. * * @funcprops \isr_ok * * @warning * Provided array of events as well as a triggered work item must not be * modified until the item has been processed by the workqueue. * * @param work Address of delayed work item. * @param events An array of events which trigger the work. * @param num_events The number of events in the array. * @param timeout Timeout after which the work will be scheduled * for execution even if not triggered. * * @retval 0 Work item started watching for events. * @retval -EINVAL Work item is being processed or has completed its work. * @retval -EADDRINUSE Work item is pending on a different workqueue. */ int k_work_poll_submit(struct k_work_poll *work, struct k_poll_event *events, int num_events, k_timeout_t timeout); /** * @brief Cancel a triggered work item. * * This routine cancels the submission of triggered work item @a work. * A triggered work item can only be canceled if no event triggered work * submission. * * @funcprops \isr_ok * * @param work Address of delayed work item. * * @retval 0 Work item canceled. * @retval -EINVAL Work item is being processed or has completed its work. */ int k_work_poll_cancel(struct k_work_poll *work); /** @} */ /** * @defgroup msgq_apis Message Queue APIs * @ingroup kernel_apis * @{ */ /** * @brief Message Queue Structure */ struct k_msgq { /** Message queue wait queue */ _wait_q_t wait_q; /** Lock */ struct k_spinlock lock; /** Message size */ size_t msg_size; /** Maximal number of messages */ uint32_t max_msgs; /** Start of message buffer */ char *buffer_start; /** End of message buffer */ char *buffer_end; /** Read pointer */ char *read_ptr; /** Write pointer */ char *write_ptr; /** Number of used messages */ uint32_t used_msgs; Z_DECL_POLL_EVENT /** Message queue */ uint8_t flags; SYS_PORT_TRACING_TRACKING_FIELD(k_msgq) #ifdef CONFIG_OBJ_CORE_MSGQ struct k_obj_core obj_core; #endif }; /** * @cond INTERNAL_HIDDEN */ #define Z_MSGQ_INITIALIZER(obj, q_buffer, q_msg_size, q_max_msgs) \ { \ .wait_q = Z_WAIT_Q_INIT(&obj.wait_q), \ .msg_size = q_msg_size, \ .max_msgs = q_max_msgs, \ .buffer_start = q_buffer, \ .buffer_end = q_buffer + (q_max_msgs * q_msg_size), \ .read_ptr = q_buffer, \ .write_ptr = q_buffer, \ .used_msgs = 0, \ Z_POLL_EVENT_OBJ_INIT(obj) \ } /** * INTERNAL_HIDDEN @endcond */ #define K_MSGQ_FLAG_ALLOC BIT(0) /** * @brief Message Queue Attributes */ struct k_msgq_attrs { /** Message Size */ size_t msg_size; /** Maximal number of messages */ uint32_t max_msgs; /** Used messages */ uint32_t used_msgs; }; /** * @brief Statically define and initialize a message queue. * * The message queue's ring buffer contains space for @a q_max_msgs messages, * each of which is @a q_msg_size bytes long. Alignment of the message queue's * ring buffer is not necessary, setting @a q_align to 1 is sufficient. * * The message queue can be accessed outside the module where it is defined * using: * * @code extern struct k_msgq ; @endcode * * @param q_name Name of the message queue. * @param q_msg_size Message size (in bytes). * @param q_max_msgs Maximum number of messages that can be queued. * @param q_align Alignment of the message queue's ring buffer (power of 2). * */ #define K_MSGQ_DEFINE(q_name, q_msg_size, q_max_msgs, q_align) \ static char __noinit __aligned(q_align) \ _k_fifo_buf_##q_name[(q_max_msgs) * (q_msg_size)]; \ STRUCT_SECTION_ITERABLE(k_msgq, q_name) = \ Z_MSGQ_INITIALIZER(q_name, _k_fifo_buf_##q_name, \ (q_msg_size), (q_max_msgs)) /** * @brief Initialize a message queue. * * This routine initializes a message queue object, prior to its first use. * * The message queue's ring buffer must contain space for @a max_msgs messages, * each of which is @a msg_size bytes long. Alignment of the message queue's * ring buffer is not necessary. * * @param msgq Address of the message queue. * @param buffer Pointer to ring buffer that holds queued messages. * @param msg_size Message size (in bytes). * @param max_msgs Maximum number of messages that can be queued. */ void k_msgq_init(struct k_msgq *msgq, char *buffer, size_t msg_size, uint32_t max_msgs); /** * @brief Initialize a message queue. * * This routine initializes a message queue object, prior to its first use, * allocating its internal ring buffer from the calling thread's resource * pool. * * Memory allocated for the ring buffer can be released by calling * k_msgq_cleanup(), or if userspace is enabled and the msgq object loses * all of its references. * * @param msgq Address of the message queue. * @param msg_size Message size (in bytes). * @param max_msgs Maximum number of messages that can be queued. * * @return 0 on success, -ENOMEM if there was insufficient memory in the * thread's resource pool, or -EINVAL if the size parameters cause * an integer overflow. */ __syscall int k_msgq_alloc_init(struct k_msgq *msgq, size_t msg_size, uint32_t max_msgs); /** * @brief Release allocated buffer for a queue * * Releases memory allocated for the ring buffer. * * @param msgq message queue to cleanup * * @retval 0 on success * @retval -EBUSY Queue not empty */ int k_msgq_cleanup(struct k_msgq *msgq); /** * @brief Send a message to a message queue. * * This routine sends a message to message queue @a q. * * @note The message content is copied from @a data into @a msgq and the @a data * pointer is not retained, so the message content will not be modified * by this function. * * @funcprops \isr_ok * * @param msgq Address of the message queue. * @param data Pointer to the message. * @param timeout Non-negative waiting period to add the message, * or one of the special values K_NO_WAIT and * K_FOREVER. * * @retval 0 Message sent. * @retval -ENOMSG Returned without waiting or queue purged. * @retval -EAGAIN Waiting period timed out. */ __syscall int k_msgq_put(struct k_msgq *msgq, const void *data, k_timeout_t timeout); /** * @brief Receive a message from a message queue. * * This routine receives a message from message queue @a q in a "first in, * first out" manner. * * @note @a timeout must be set to K_NO_WAIT if called from ISR. * * @funcprops \isr_ok * * @param msgq Address of the message queue. * @param data Address of area to hold the received message. * @param timeout Waiting period to receive the message, * or one of the special values K_NO_WAIT and * K_FOREVER. * * @retval 0 Message received. * @retval -ENOMSG Returned without waiting. * @retval -EAGAIN Waiting period timed out. */ __syscall int k_msgq_get(struct k_msgq *msgq, void *data, k_timeout_t timeout); /** * @brief Peek/read a message from a message queue. * * This routine reads a message from message queue @a q in a "first in, * first out" manner and leaves the message in the queue. * * @funcprops \isr_ok * * @param msgq Address of the message queue. * @param data Address of area to hold the message read from the queue. * * @retval 0 Message read. * @retval -ENOMSG Returned when the queue has no message. */ __syscall int k_msgq_peek(struct k_msgq *msgq, void *data); /** * @brief Peek/read a message from a message queue at the specified index * * This routine reads a message from message queue at the specified index * and leaves the message in the queue. * k_msgq_peek_at(msgq, data, 0) is equivalent to k_msgq_peek(msgq, data) * * @funcprops \isr_ok * * @param msgq Address of the message queue. * @param data Address of area to hold the message read from the queue. * @param idx Message queue index at which to peek * * @retval 0 Message read. * @retval -ENOMSG Returned when the queue has no message at index. */ __syscall int k_msgq_peek_at(struct k_msgq *msgq, void *data, uint32_t idx); /** * @brief Purge a message queue. * * This routine discards all unreceived messages in a message queue's ring * buffer. Any threads that are blocked waiting to send a message to the * message queue are unblocked and see an -ENOMSG error code. * * @param msgq Address of the message queue. */ __syscall void k_msgq_purge(struct k_msgq *msgq); /** * @brief Get the amount of free space in a message queue. * * This routine returns the number of unused entries in a message queue's * ring buffer. * * @param msgq Address of the message queue. * * @return Number of unused ring buffer entries. */ __syscall uint32_t k_msgq_num_free_get(struct k_msgq *msgq); /** * @brief Get basic attributes of a message queue. * * This routine fetches basic attributes of message queue into attr argument. * * @param msgq Address of the message queue. * @param attrs pointer to message queue attribute structure. */ __syscall void k_msgq_get_attrs(struct k_msgq *msgq, struct k_msgq_attrs *attrs); static inline uint32_t z_impl_k_msgq_num_free_get(struct k_msgq *msgq) { return msgq->max_msgs - msgq->used_msgs; } /** * @brief Get the number of messages in a message queue. * * This routine returns the number of messages in a message queue's ring buffer. * * @param msgq Address of the message queue. * * @return Number of messages. */ __syscall uint32_t k_msgq_num_used_get(struct k_msgq *msgq); static inline uint32_t z_impl_k_msgq_num_used_get(struct k_msgq *msgq) { return msgq->used_msgs; } /** @} */ /** * @defgroup mailbox_apis Mailbox APIs * @ingroup kernel_apis * @{ */ /** * @brief Mailbox Message Structure * */ struct k_mbox_msg { /** size of message (in bytes) */ size_t size; /** application-defined information value */ uint32_t info; /** sender's message data buffer */ void *tx_data; /** source thread id */ k_tid_t rx_source_thread; /** target thread id */ k_tid_t tx_target_thread; /** internal use only - thread waiting on send (may be a dummy) */ k_tid_t _syncing_thread; #if (CONFIG_NUM_MBOX_ASYNC_MSGS > 0) /** internal use only - semaphore used during asynchronous send */ struct k_sem *_async_sem; #endif }; /** * @brief Mailbox Structure * */ struct k_mbox { /** Transmit messages queue */ _wait_q_t tx_msg_queue; /** Receive message queue */ _wait_q_t rx_msg_queue; struct k_spinlock lock; SYS_PORT_TRACING_TRACKING_FIELD(k_mbox) #ifdef CONFIG_OBJ_CORE_MAILBOX struct k_obj_core obj_core; #endif }; /** * @cond INTERNAL_HIDDEN */ #define Z_MBOX_INITIALIZER(obj) \ { \ .tx_msg_queue = Z_WAIT_Q_INIT(&obj.tx_msg_queue), \ .rx_msg_queue = Z_WAIT_Q_INIT(&obj.rx_msg_queue), \ } /** * INTERNAL_HIDDEN @endcond */ /** * @brief Statically define and initialize a mailbox. * * The mailbox is to be accessed outside the module where it is defined using: * * @code extern struct k_mbox ; @endcode * * @param name Name of the mailbox. */ #define K_MBOX_DEFINE(name) \ STRUCT_SECTION_ITERABLE(k_mbox, name) = \ Z_MBOX_INITIALIZER(name) \ /** * @brief Initialize a mailbox. * * This routine initializes a mailbox object, prior to its first use. * * @param mbox Address of the mailbox. */ void k_mbox_init(struct k_mbox *mbox); /** * @brief Send a mailbox message in a synchronous manner. * * This routine sends a message to @a mbox and waits for a receiver to both * receive and process it. The message data may be in a buffer or non-existent * (i.e. an empty message). * * @param mbox Address of the mailbox. * @param tx_msg Address of the transmit message descriptor. * @param timeout Waiting period for the message to be received, * or one of the special values K_NO_WAIT * and K_FOREVER. Once the message has been received, * this routine waits as long as necessary for the message * to be completely processed. * * @retval 0 Message sent. * @retval -ENOMSG Returned without waiting. * @retval -EAGAIN Waiting period timed out. */ int k_mbox_put(struct k_mbox *mbox, struct k_mbox_msg *tx_msg, k_timeout_t timeout); /** * @brief Send a mailbox message in an asynchronous manner. * * This routine sends a message to @a mbox without waiting for a receiver * to process it. The message data may be in a buffer or non-existent * (i.e. an empty message). Optionally, the semaphore @a sem will be given * when the message has been both received and completely processed by * the receiver. * * @param mbox Address of the mailbox. * @param tx_msg Address of the transmit message descriptor. * @param sem Address of a semaphore, or NULL if none is needed. */ void k_mbox_async_put(struct k_mbox *mbox, struct k_mbox_msg *tx_msg, struct k_sem *sem); /** * @brief Receive a mailbox message. * * This routine receives a message from @a mbox, then optionally retrieves * its data and disposes of the message. * * @param mbox Address of the mailbox. * @param rx_msg Address of the receive message descriptor. * @param buffer Address of the buffer to receive data, or NULL to defer data * retrieval and message disposal until later. * @param timeout Waiting period for a message to be received, * or one of the special values K_NO_WAIT and K_FOREVER. * * @retval 0 Message received. * @retval -ENOMSG Returned without waiting. * @retval -EAGAIN Waiting period timed out. */ int k_mbox_get(struct k_mbox *mbox, struct k_mbox_msg *rx_msg, void *buffer, k_timeout_t timeout); /** * @brief Retrieve mailbox message data into a buffer. * * This routine completes the processing of a received message by retrieving * its data into a buffer, then disposing of the message. * * Alternatively, this routine can be used to dispose of a received message * without retrieving its data. * * @param rx_msg Address of the receive message descriptor. * @param buffer Address of the buffer to receive data, or NULL to discard * the data. */ void k_mbox_data_get(struct k_mbox_msg *rx_msg, void *buffer); /** @} */ /** * @defgroup pipe_apis Pipe APIs * @ingroup kernel_apis * @{ */ /** Pipe Structure */ struct k_pipe { unsigned char *buffer; /**< Pipe buffer: may be NULL */ size_t size; /**< Buffer size */ size_t bytes_used; /**< # bytes used in buffer */ size_t read_index; /**< Where in buffer to read from */ size_t write_index; /**< Where in buffer to write */ struct k_spinlock lock; /**< Synchronization lock */ struct { _wait_q_t readers; /**< Reader wait queue */ _wait_q_t writers; /**< Writer wait queue */ } wait_q; /** Wait queue */ Z_DECL_POLL_EVENT uint8_t flags; /**< Flags */ SYS_PORT_TRACING_TRACKING_FIELD(k_pipe) #ifdef CONFIG_OBJ_CORE_PIPE struct k_obj_core obj_core; #endif }; /** * @cond INTERNAL_HIDDEN */ #define K_PIPE_FLAG_ALLOC BIT(0) /** Buffer was allocated */ #define Z_PIPE_INITIALIZER(obj, pipe_buffer, pipe_buffer_size) \ { \ .buffer = pipe_buffer, \ .size = pipe_buffer_size, \ .bytes_used = 0, \ .read_index = 0, \ .write_index = 0, \ .lock = {}, \ .wait_q = { \ .readers = Z_WAIT_Q_INIT(&obj.wait_q.readers), \ .writers = Z_WAIT_Q_INIT(&obj.wait_q.writers) \ }, \ Z_POLL_EVENT_OBJ_INIT(obj) \ .flags = 0, \ } /** * INTERNAL_HIDDEN @endcond */ /** * @brief Statically define and initialize a pipe. * * The pipe can be accessed outside the module where it is defined using: * * @code extern struct k_pipe ; @endcode * * @param name Name of the pipe. * @param pipe_buffer_size Size of the pipe's ring buffer (in bytes), * or zero if no ring buffer is used. * @param pipe_align Alignment of the pipe's ring buffer (power of 2). * */ #define K_PIPE_DEFINE(name, pipe_buffer_size, pipe_align) \ static unsigned char __noinit __aligned(pipe_align) \ _k_pipe_buf_##name[pipe_buffer_size]; \ STRUCT_SECTION_ITERABLE(k_pipe, name) = \ Z_PIPE_INITIALIZER(name, _k_pipe_buf_##name, pipe_buffer_size) /** * @brief Initialize a pipe. * * This routine initializes a pipe object, prior to its first use. * * @param pipe Address of the pipe. * @param buffer Address of the pipe's ring buffer, or NULL if no ring buffer * is used. * @param size Size of the pipe's ring buffer (in bytes), or zero if no ring * buffer is used. */ void k_pipe_init(struct k_pipe *pipe, unsigned char *buffer, size_t size); /** * @brief Release a pipe's allocated buffer * * If a pipe object was given a dynamically allocated buffer via * k_pipe_alloc_init(), this will free it. This function does nothing * if the buffer wasn't dynamically allocated. * * @param pipe Address of the pipe. * @retval 0 on success * @retval -EAGAIN nothing to cleanup */ int k_pipe_cleanup(struct k_pipe *pipe); /** * @brief Initialize a pipe and allocate a buffer for it * * Storage for the buffer region will be allocated from the calling thread's * resource pool. This memory will be released if k_pipe_cleanup() is called, * or userspace is enabled and the pipe object loses all references to it. * * This function should only be called on uninitialized pipe objects. * * @param pipe Address of the pipe. * @param size Size of the pipe's ring buffer (in bytes), or zero if no ring * buffer is used. * @retval 0 on success * @retval -ENOMEM if memory couldn't be allocated */ __syscall int k_pipe_alloc_init(struct k_pipe *pipe, size_t size); /** * @brief Write data to a pipe. * * This routine writes up to @a bytes_to_write bytes of data to @a pipe. * * @param pipe Address of the pipe. * @param data Address of data to write. * @param bytes_to_write Size of data (in bytes). * @param bytes_written Address of area to hold the number of bytes written. * @param min_xfer Minimum number of bytes to write. * @param timeout Waiting period to wait for the data to be written, * or one of the special values K_NO_WAIT and K_FOREVER. * * @retval 0 At least @a min_xfer bytes of data were written. * @retval -EIO Returned without waiting; zero data bytes were written. * @retval -EAGAIN Waiting period timed out; between zero and @a min_xfer * minus one data bytes were written. */ __syscall int k_pipe_put(struct k_pipe *pipe, const void *data, size_t bytes_to_write, size_t *bytes_written, size_t min_xfer, k_timeout_t timeout); /** * @brief Read data from a pipe. * * This routine reads up to @a bytes_to_read bytes of data from @a pipe. * * @param pipe Address of the pipe. * @param data Address to place the data read from pipe. * @param bytes_to_read Maximum number of data bytes to read. * @param bytes_read Address of area to hold the number of bytes read. * @param min_xfer Minimum number of data bytes to read. * @param timeout Waiting period to wait for the data to be read, * or one of the special values K_NO_WAIT and K_FOREVER. * * @retval 0 At least @a min_xfer bytes of data were read. * @retval -EINVAL invalid parameters supplied * @retval -EIO Returned without waiting; zero data bytes were read. * @retval -EAGAIN Waiting period timed out; between zero and @a min_xfer * minus one data bytes were read. */ __syscall int k_pipe_get(struct k_pipe *pipe, void *data, size_t bytes_to_read, size_t *bytes_read, size_t min_xfer, k_timeout_t timeout); /** * @brief Query the number of bytes that may be read from @a pipe. * * @param pipe Address of the pipe. * * @retval a number n such that 0 <= n <= @ref k_pipe.size; the * result is zero for unbuffered pipes. */ __syscall size_t k_pipe_read_avail(struct k_pipe *pipe); /** * @brief Query the number of bytes that may be written to @a pipe * * @param pipe Address of the pipe. * * @retval a number n such that 0 <= n <= @ref k_pipe.size; the * result is zero for unbuffered pipes. */ __syscall size_t k_pipe_write_avail(struct k_pipe *pipe); /** * @brief Flush the pipe of write data * * This routine flushes the pipe. Flushing the pipe is equivalent to reading * both all the data in the pipe's buffer and all the data waiting to go into * that pipe into a large temporary buffer and discarding the buffer. Any * writers that were previously pended become unpended. * * @param pipe Address of the pipe. */ __syscall void k_pipe_flush(struct k_pipe *pipe); /** * @brief Flush the pipe's internal buffer * * This routine flushes the pipe's internal buffer. This is equivalent to * reading up to N bytes from the pipe (where N is the size of the pipe's * buffer) into a temporary buffer and then discarding that buffer. If there * were writers previously pending, then some may unpend as they try to fill * up the pipe's emptied buffer. * * @param pipe Address of the pipe. */ __syscall void k_pipe_buffer_flush(struct k_pipe *pipe); /** @} */ /** * @cond INTERNAL_HIDDEN */ struct k_mem_slab_info { uint32_t num_blocks; size_t block_size; uint32_t num_used; #ifdef CONFIG_MEM_SLAB_TRACE_MAX_UTILIZATION uint32_t max_used; #endif }; struct k_mem_slab { _wait_q_t wait_q; struct k_spinlock lock; char *buffer; char *free_list; struct k_mem_slab_info info; SYS_PORT_TRACING_TRACKING_FIELD(k_mem_slab) #ifdef CONFIG_OBJ_CORE_MEM_SLAB struct k_obj_core obj_core; #endif }; #define Z_MEM_SLAB_INITIALIZER(_slab, _slab_buffer, _slab_block_size, \ _slab_num_blocks) \ { \ .wait_q = Z_WAIT_Q_INIT(&(_slab).wait_q), \ .lock = {}, \ .buffer = _slab_buffer, \ .free_list = NULL, \ .info = {_slab_num_blocks, _slab_block_size, 0} \ } /** * INTERNAL_HIDDEN @endcond */ /** * @defgroup mem_slab_apis Memory Slab APIs * @ingroup kernel_apis * @{ */ /** * @brief Statically define and initialize a memory slab in a public (non-static) scope. * * The memory slab's buffer contains @a slab_num_blocks memory blocks * that are @a slab_block_size bytes long. The buffer is aligned to a * @a slab_align -byte boundary. To ensure that each memory block is similarly * aligned to this boundary, @a slab_block_size must also be a multiple of * @a slab_align. * * The memory slab can be accessed outside the module where it is defined * using: * * @code extern struct k_mem_slab ; @endcode * * @note This macro cannot be used together with a static keyword. * If such a use-case is desired, use @ref K_MEM_SLAB_DEFINE_STATIC * instead. * * @param name Name of the memory slab. * @param slab_block_size Size of each memory block (in bytes). * @param slab_num_blocks Number memory blocks. * @param slab_align Alignment of the memory slab's buffer (power of 2). */ #define K_MEM_SLAB_DEFINE(name, slab_block_size, slab_num_blocks, slab_align) \ char __noinit_named(k_mem_slab_buf_##name) \ __aligned(WB_UP(slab_align)) \ _k_mem_slab_buf_##name[(slab_num_blocks) * WB_UP(slab_block_size)]; \ STRUCT_SECTION_ITERABLE(k_mem_slab, name) = \ Z_MEM_SLAB_INITIALIZER(name, _k_mem_slab_buf_##name, \ WB_UP(slab_block_size), slab_num_blocks) /** * @brief Statically define and initialize a memory slab in a private (static) scope. * * The memory slab's buffer contains @a slab_num_blocks memory blocks * that are @a slab_block_size bytes long. The buffer is aligned to a * @a slab_align -byte boundary. To ensure that each memory block is similarly * aligned to this boundary, @a slab_block_size must also be a multiple of * @a slab_align. * * @param name Name of the memory slab. * @param slab_block_size Size of each memory block (in bytes). * @param slab_num_blocks Number memory blocks. * @param slab_align Alignment of the memory slab's buffer (power of 2). */ #define K_MEM_SLAB_DEFINE_STATIC(name, slab_block_size, slab_num_blocks, slab_align) \ static char __noinit_named(k_mem_slab_buf_##name) \ __aligned(WB_UP(slab_align)) \ _k_mem_slab_buf_##name[(slab_num_blocks) * WB_UP(slab_block_size)]; \ static STRUCT_SECTION_ITERABLE(k_mem_slab, name) = \ Z_MEM_SLAB_INITIALIZER(name, _k_mem_slab_buf_##name, \ WB_UP(slab_block_size), slab_num_blocks) /** * @brief Initialize a memory slab. * * Initializes a memory slab, prior to its first use. * * The memory slab's buffer contains @a slab_num_blocks memory blocks * that are @a slab_block_size bytes long. The buffer must be aligned to an * N-byte boundary matching a word boundary, where N is a power of 2 * (i.e. 4 on 32-bit systems, 8, 16, ...). * To ensure that each memory block is similarly aligned to this boundary, * @a slab_block_size must also be a multiple of N. * * @param slab Address of the memory slab. * @param buffer Pointer to buffer used for the memory blocks. * @param block_size Size of each memory block (in bytes). * @param num_blocks Number of memory blocks. * * @retval 0 on success * @retval -EINVAL invalid data supplied * */ int k_mem_slab_init(struct k_mem_slab *slab, void *buffer, size_t block_size, uint32_t num_blocks); /** * @brief Allocate memory from a memory slab. * * This routine allocates a memory block from a memory slab. * * @note @a timeout must be set to K_NO_WAIT if called from ISR. * @note When CONFIG_MULTITHREADING=n any @a timeout is treated as K_NO_WAIT. * * @funcprops \isr_ok * * @param slab Address of the memory slab. * @param mem Pointer to block address area. * @param timeout Non-negative waiting period to wait for operation to complete. * Use K_NO_WAIT to return without waiting, * or K_FOREVER to wait as long as necessary. * * @retval 0 Memory allocated. The block address area pointed at by @a mem * is set to the starting address of the memory block. * @retval -ENOMEM Returned without waiting. * @retval -EAGAIN Waiting period timed out. * @retval -EINVAL Invalid data supplied */ int k_mem_slab_alloc(struct k_mem_slab *slab, void **mem, k_timeout_t timeout); /** * @brief Free memory allocated from a memory slab. * * This routine releases a previously allocated memory block back to its * associated memory slab. * * @param slab Address of the memory slab. * @param mem Pointer to the memory block (as returned by k_mem_slab_alloc()). */ void k_mem_slab_free(struct k_mem_slab *slab, void *mem); /** * @brief Get the number of used blocks in a memory slab. * * This routine gets the number of memory blocks that are currently * allocated in @a slab. * * @param slab Address of the memory slab. * * @return Number of allocated memory blocks. */ static inline uint32_t k_mem_slab_num_used_get(struct k_mem_slab *slab) { return slab->info.num_used; } /** * @brief Get the number of maximum used blocks so far in a memory slab. * * This routine gets the maximum number of memory blocks that were * allocated in @a slab. * * @param slab Address of the memory slab. * * @return Maximum number of allocated memory blocks. */ static inline uint32_t k_mem_slab_max_used_get(struct k_mem_slab *slab) { #ifdef CONFIG_MEM_SLAB_TRACE_MAX_UTILIZATION return slab->info.max_used; #else ARG_UNUSED(slab); return 0; #endif } /** * @brief Get the number of unused blocks in a memory slab. * * This routine gets the number of memory blocks that are currently * unallocated in @a slab. * * @param slab Address of the memory slab. * * @return Number of unallocated memory blocks. */ static inline uint32_t k_mem_slab_num_free_get(struct k_mem_slab *slab) { return slab->info.num_blocks - slab->info.num_used; } /** * @brief Get the memory stats for a memory slab * * This routine gets the runtime memory usage stats for the slab @a slab. * * @param slab Address of the memory slab * @param stats Pointer to memory into which to copy memory usage statistics * * @retval 0 Success * @retval -EINVAL Any parameter points to NULL */ int k_mem_slab_runtime_stats_get(struct k_mem_slab *slab, struct sys_memory_stats *stats); /** * @brief Reset the maximum memory usage for a slab * * This routine resets the maximum memory usage for the slab @a slab to its * current usage. * * @param slab Address of the memory slab * * @retval 0 Success * @retval -EINVAL Memory slab is NULL */ int k_mem_slab_runtime_stats_reset_max(struct k_mem_slab *slab); /** @} */ /** * @addtogroup heap_apis * @{ */ /* kernel synchronized heap struct */ struct k_heap { struct sys_heap heap; _wait_q_t wait_q; struct k_spinlock lock; }; /** * @brief Initialize a k_heap * * This constructs a synchronized k_heap object over a memory region * specified by the user. Note that while any alignment and size can * be passed as valid parameters, internal alignment restrictions * inside the inner sys_heap mean that not all bytes may be usable as * allocated memory. * * @param h Heap struct to initialize * @param mem Pointer to memory. * @param bytes Size of memory region, in bytes */ void k_heap_init(struct k_heap *h, void *mem, size_t bytes) __attribute_nonnull(1); /** @brief Allocate aligned memory from a k_heap * * Behaves in all ways like k_heap_alloc(), except that the returned * memory (if available) will have a starting address in memory which * is a multiple of the specified power-of-two alignment value in * bytes. The resulting memory can be returned to the heap using * k_heap_free(). * * @note @a timeout must be set to K_NO_WAIT if called from ISR. * @note When CONFIG_MULTITHREADING=n any @a timeout is treated as K_NO_WAIT. * * @funcprops \isr_ok * * @param h Heap from which to allocate * @param align Alignment in bytes, must be a power of two * @param bytes Number of bytes requested * @param timeout How long to wait, or K_NO_WAIT * @return Pointer to memory the caller can now use */ void *k_heap_aligned_alloc(struct k_heap *h, size_t align, size_t bytes, k_timeout_t timeout) __attribute_nonnull(1); /** * @brief Allocate memory from a k_heap * * Allocates and returns a memory buffer from the memory region owned * by the heap. If no memory is available immediately, the call will * block for the specified timeout (constructed via the standard * timeout API, or K_NO_WAIT or K_FOREVER) waiting for memory to be * freed. If the allocation cannot be performed by the expiration of * the timeout, NULL will be returned. * Allocated memory is aligned on a multiple of pointer sizes. * * @note @a timeout must be set to K_NO_WAIT if called from ISR. * @note When CONFIG_MULTITHREADING=n any @a timeout is treated as K_NO_WAIT. * * @funcprops \isr_ok * * @param h Heap from which to allocate * @param bytes Desired size of block to allocate * @param timeout How long to wait, or K_NO_WAIT * @return A pointer to valid heap memory, or NULL */ void *k_heap_alloc(struct k_heap *h, size_t bytes, k_timeout_t timeout) __attribute_nonnull(1); /** * @brief Free memory allocated by k_heap_alloc() * * Returns the specified memory block, which must have been returned * from k_heap_alloc(), to the heap for use by other callers. Passing * a NULL block is legal, and has no effect. * * @param h Heap to which to return the memory * @param mem A valid memory block, or NULL */ void k_heap_free(struct k_heap *h, void *mem) __attribute_nonnull(1); /* Hand-calculated minimum heap sizes needed to return a successful * 1-byte allocation. See details in lib/os/heap.[ch] */ #define Z_HEAP_MIN_SIZE (sizeof(void *) > 4 ? 56 : 44) /** * @brief Define a static k_heap in the specified linker section * * This macro defines and initializes a static memory region and * k_heap of the requested size in the specified linker section. * After kernel start, &name can be used as if k_heap_init() had * been called. * * Note that this macro enforces a minimum size on the memory region * to accommodate metadata requirements. Very small heaps will be * padded to fit. * * @param name Symbol name for the struct k_heap object * @param bytes Size of memory region, in bytes * @param in_section __attribute__((section(name)) */ #define Z_HEAP_DEFINE_IN_SECT(name, bytes, in_section) \ char in_section \ __aligned(8) /* CHUNK_UNIT */ \ kheap_##name[MAX(bytes, Z_HEAP_MIN_SIZE)]; \ STRUCT_SECTION_ITERABLE(k_heap, name) = { \ .heap = { \ .init_mem = kheap_##name, \ .init_bytes = MAX(bytes, Z_HEAP_MIN_SIZE), \ }, \ } /** * @brief Define a static k_heap * * This macro defines and initializes a static memory region and * k_heap of the requested size. After kernel start, &name can be * used as if k_heap_init() had been called. * * Note that this macro enforces a minimum size on the memory region * to accommodate metadata requirements. Very small heaps will be * padded to fit. * * @param name Symbol name for the struct k_heap object * @param bytes Size of memory region, in bytes */ #define K_HEAP_DEFINE(name, bytes) \ Z_HEAP_DEFINE_IN_SECT(name, bytes, \ __noinit_named(kheap_buf_##name)) /** * @brief Define a static k_heap in uncached memory * * This macro defines and initializes a static memory region and * k_heap of the requested size in uncached memory. After kernel * start, &name can be used as if k_heap_init() had been called. * * Note that this macro enforces a minimum size on the memory region * to accommodate metadata requirements. Very small heaps will be * padded to fit. * * @param name Symbol name for the struct k_heap object * @param bytes Size of memory region, in bytes */ #define K_HEAP_DEFINE_NOCACHE(name, bytes) \ Z_HEAP_DEFINE_IN_SECT(name, bytes, __nocache) /** * @} */ /** * @defgroup heap_apis Heap APIs * @ingroup kernel_apis * @{ */ /** * @brief Allocate memory from the heap with a specified alignment. * * This routine provides semantics similar to aligned_alloc(); memory is * allocated from the heap with a specified alignment. However, one minor * difference is that k_aligned_alloc() accepts any non-zero @p size, * whereas aligned_alloc() only accepts a @p size that is an integral * multiple of @p align. * * Above, aligned_alloc() refers to: * C11 standard (ISO/IEC 9899:2011): 7.22.3.1 * The aligned_alloc function (p: 347-348) * * @param align Alignment of memory requested (in bytes). * @param size Amount of memory requested (in bytes). * * @return Address of the allocated memory if successful; otherwise NULL. */ void *k_aligned_alloc(size_t align, size_t size); /** * @brief Allocate memory from the heap. * * This routine provides traditional malloc() semantics. Memory is * allocated from the heap memory pool. * Allocated memory is aligned on a multiple of pointer sizes. * * @param size Amount of memory requested (in bytes). * * @return Address of the allocated memory if successful; otherwise NULL. */ void *k_malloc(size_t size); /** * @brief Free memory allocated from heap. * * This routine provides traditional free() semantics. The memory being * returned must have been allocated from the heap memory pool. * * If @a ptr is NULL, no operation is performed. * * @param ptr Pointer to previously allocated memory. */ void k_free(void *ptr); /** * @brief Allocate memory from heap, array style * * This routine provides traditional calloc() semantics. Memory is * allocated from the heap memory pool and zeroed. * * @param nmemb Number of elements in the requested array * @param size Size of each array element (in bytes). * * @return Address of the allocated memory if successful; otherwise NULL. */ void *k_calloc(size_t nmemb, size_t size); /** @} */ /* polling API - PRIVATE */ #ifdef CONFIG_POLL #define _INIT_OBJ_POLL_EVENT(obj) do { (obj)->poll_event = NULL; } while (false) #else #define _INIT_OBJ_POLL_EVENT(obj) do { } while (false) #endif /* private - types bit positions */ enum _poll_types_bits { /* can be used to ignore an event */ _POLL_TYPE_IGNORE, /* to be signaled by k_poll_signal_raise() */ _POLL_TYPE_SIGNAL, /* semaphore availability */ _POLL_TYPE_SEM_AVAILABLE, /* queue/FIFO/LIFO data availability */ _POLL_TYPE_DATA_AVAILABLE, /* msgq data availability */ _POLL_TYPE_MSGQ_DATA_AVAILABLE, /* pipe data availability */ _POLL_TYPE_PIPE_DATA_AVAILABLE, _POLL_NUM_TYPES }; #define Z_POLL_TYPE_BIT(type) (1U << ((type) - 1U)) /* private - states bit positions */ enum _poll_states_bits { /* default state when creating event */ _POLL_STATE_NOT_READY, /* signaled by k_poll_signal_raise() */ _POLL_STATE_SIGNALED, /* semaphore is available */ _POLL_STATE_SEM_AVAILABLE, /* data is available to read on queue/FIFO/LIFO */ _POLL_STATE_DATA_AVAILABLE, /* queue/FIFO/LIFO wait was cancelled */ _POLL_STATE_CANCELLED, /* data is available to read on a message queue */ _POLL_STATE_MSGQ_DATA_AVAILABLE, /* data is available to read from a pipe */ _POLL_STATE_PIPE_DATA_AVAILABLE, _POLL_NUM_STATES }; #define Z_POLL_STATE_BIT(state) (1U << ((state) - 1U)) #define _POLL_EVENT_NUM_UNUSED_BITS \ (32 - (0 \ + 8 /* tag */ \ + _POLL_NUM_TYPES \ + _POLL_NUM_STATES \ + 1 /* modes */ \ )) /* end of polling API - PRIVATE */ /** * @defgroup poll_apis Async polling APIs * @ingroup kernel_apis * @{ */ /* Public polling API */ /* public - values for k_poll_event.type bitfield */ #define K_POLL_TYPE_IGNORE 0 #define K_POLL_TYPE_SIGNAL Z_POLL_TYPE_BIT(_POLL_TYPE_SIGNAL) #define K_POLL_TYPE_SEM_AVAILABLE Z_POLL_TYPE_BIT(_POLL_TYPE_SEM_AVAILABLE) #define K_POLL_TYPE_DATA_AVAILABLE Z_POLL_TYPE_BIT(_POLL_TYPE_DATA_AVAILABLE) #define K_POLL_TYPE_FIFO_DATA_AVAILABLE K_POLL_TYPE_DATA_AVAILABLE #define K_POLL_TYPE_MSGQ_DATA_AVAILABLE Z_POLL_TYPE_BIT(_POLL_TYPE_MSGQ_DATA_AVAILABLE) #define K_POLL_TYPE_PIPE_DATA_AVAILABLE Z_POLL_TYPE_BIT(_POLL_TYPE_PIPE_DATA_AVAILABLE) /* public - polling modes */ enum k_poll_modes { /* polling thread does not take ownership of objects when available */ K_POLL_MODE_NOTIFY_ONLY = 0, K_POLL_NUM_MODES }; /* public - values for k_poll_event.state bitfield */ #define K_POLL_STATE_NOT_READY 0 #define K_POLL_STATE_SIGNALED Z_POLL_STATE_BIT(_POLL_STATE_SIGNALED) #define K_POLL_STATE_SEM_AVAILABLE Z_POLL_STATE_BIT(_POLL_STATE_SEM_AVAILABLE) #define K_POLL_STATE_DATA_AVAILABLE Z_POLL_STATE_BIT(_POLL_STATE_DATA_AVAILABLE) #define K_POLL_STATE_FIFO_DATA_AVAILABLE K_POLL_STATE_DATA_AVAILABLE #define K_POLL_STATE_MSGQ_DATA_AVAILABLE Z_POLL_STATE_BIT(_POLL_STATE_MSGQ_DATA_AVAILABLE) #define K_POLL_STATE_PIPE_DATA_AVAILABLE Z_POLL_STATE_BIT(_POLL_STATE_PIPE_DATA_AVAILABLE) #define K_POLL_STATE_CANCELLED Z_POLL_STATE_BIT(_POLL_STATE_CANCELLED) /* public - poll signal object */ struct k_poll_signal { /** PRIVATE - DO NOT TOUCH */ sys_dlist_t poll_events; /** * 1 if the event has been signaled, 0 otherwise. Stays set to 1 until * user resets it to 0. */ unsigned int signaled; /** custom result value passed to k_poll_signal_raise() if needed */ int result; }; #define K_POLL_SIGNAL_INITIALIZER(obj) \ { \ .poll_events = SYS_DLIST_STATIC_INIT(&obj.poll_events), \ .signaled = 0, \ .result = 0, \ } /** * @brief Poll Event * */ struct k_poll_event { /** PRIVATE - DO NOT TOUCH */ sys_dnode_t _node; /** PRIVATE - DO NOT TOUCH */ struct z_poller *poller; /** optional user-specified tag, opaque, untouched by the API */ uint32_t tag:8; /** bitfield of event types (bitwise-ORed K_POLL_TYPE_xxx values) */ uint32_t type:_POLL_NUM_TYPES; /** bitfield of event states (bitwise-ORed K_POLL_STATE_xxx values) */ uint32_t state:_POLL_NUM_STATES; /** mode of operation, from enum k_poll_modes */ uint32_t mode:1; /** unused bits in 32-bit word */ uint32_t unused:_POLL_EVENT_NUM_UNUSED_BITS; /** per-type data */ union { void *obj; struct k_poll_signal *signal; struct k_sem *sem; struct k_fifo *fifo; struct k_queue *queue; struct k_msgq *msgq; #ifdef CONFIG_PIPES struct k_pipe *pipe; #endif }; }; #define K_POLL_EVENT_INITIALIZER(_event_type, _event_mode, _event_obj) \ { \ .poller = NULL, \ .type = _event_type, \ .state = K_POLL_STATE_NOT_READY, \ .mode = _event_mode, \ .unused = 0, \ { \ .obj = _event_obj, \ }, \ } #define K_POLL_EVENT_STATIC_INITIALIZER(_event_type, _event_mode, _event_obj, \ event_tag) \ { \ .tag = event_tag, \ .type = _event_type, \ .state = K_POLL_STATE_NOT_READY, \ .mode = _event_mode, \ .unused = 0, \ { \ .obj = _event_obj, \ }, \ } /** * @brief Initialize one struct k_poll_event instance * * After this routine is called on a poll event, the event it ready to be * placed in an event array to be passed to k_poll(). * * @param event The event to initialize. * @param type A bitfield of the types of event, from the K_POLL_TYPE_xxx * values. Only values that apply to the same object being polled * can be used together. Choosing K_POLL_TYPE_IGNORE disables the * event. * @param mode Future. Use K_POLL_MODE_NOTIFY_ONLY. * @param obj Kernel object or poll signal. */ void k_poll_event_init(struct k_poll_event *event, uint32_t type, int mode, void *obj); /** * @brief Wait for one or many of multiple poll events to occur * * This routine allows a thread to wait concurrently for one or many of * multiple poll events to have occurred. Such events can be a kernel object * being available, like a semaphore, or a poll signal event. * * When an event notifies that a kernel object is available, the kernel object * is not "given" to the thread calling k_poll(): it merely signals the fact * that the object was available when the k_poll() call was in effect. Also, * all threads trying to acquire an object the regular way, i.e. by pending on * the object, have precedence over the thread polling on the object. This * means that the polling thread will never get the poll event on an object * until the object becomes available and its pend queue is empty. For this * reason, the k_poll() call is more effective when the objects being polled * only have one thread, the polling thread, trying to acquire them. * * When k_poll() returns 0, the caller should loop on all the events that were * passed to k_poll() and check the state field for the values that were * expected and take the associated actions. * * Before being reused for another call to k_poll(), the user has to reset the * state field to K_POLL_STATE_NOT_READY. * * When called from user mode, a temporary memory allocation is required from * the caller's resource pool. * * @param events An array of events to be polled for. * @param num_events The number of events in the array. * @param timeout Waiting period for an event to be ready, * or one of the special values K_NO_WAIT and K_FOREVER. * * @retval 0 One or more events are ready. * @retval -EAGAIN Waiting period timed out. * @retval -EINTR Polling has been interrupted, e.g. with * k_queue_cancel_wait(). All output events are still set and valid, * cancelled event(s) will be set to K_POLL_STATE_CANCELLED. In other * words, -EINTR status means that at least one of output events is * K_POLL_STATE_CANCELLED. * @retval -ENOMEM Thread resource pool insufficient memory (user mode only) * @retval -EINVAL Bad parameters (user mode only) */ __syscall int k_poll(struct k_poll_event *events, int num_events, k_timeout_t timeout); /** * @brief Initialize a poll signal object. * * Ready a poll signal object to be signaled via k_poll_signal_raise(). * * @param sig A poll signal. */ __syscall void k_poll_signal_init(struct k_poll_signal *sig); /* * @brief Reset a poll signal object's state to unsignaled. * * @param sig A poll signal object */ __syscall void k_poll_signal_reset(struct k_poll_signal *sig); /** * @brief Fetch the signaled state and result value of a poll signal * * @param sig A poll signal object * @param signaled An integer buffer which will be written nonzero if the * object was signaled * @param result An integer destination buffer which will be written with the * result value if the object was signaled, or an undefined * value if it was not. */ __syscall void k_poll_signal_check(struct k_poll_signal *sig, unsigned int *signaled, int *result); /** * @brief Signal a poll signal object. * * This routine makes ready a poll signal, which is basically a poll event of * type K_POLL_TYPE_SIGNAL. If a thread was polling on that event, it will be * made ready to run. A @a result value can be specified. * * The poll signal contains a 'signaled' field that, when set by * k_poll_signal_raise(), stays set until the user sets it back to 0 with * k_poll_signal_reset(). It thus has to be reset by the user before being * passed again to k_poll() or k_poll() will consider it being signaled, and * will return immediately. * * @note The result is stored and the 'signaled' field is set even if * this function returns an error indicating that an expiring poll was * not notified. The next k_poll() will detect the missed raise. * * @param sig A poll signal. * @param result The value to store in the result field of the signal. * * @retval 0 The signal was delivered successfully. * @retval -EAGAIN The polling thread's timeout is in the process of expiring. */ __syscall int k_poll_signal_raise(struct k_poll_signal *sig, int result); /** @} */ /** * @defgroup cpu_idle_apis CPU Idling APIs * @ingroup kernel_apis * @{ */ /** * @brief Make the CPU idle. * * This function makes the CPU idle until an event wakes it up. * * In a regular system, the idle thread should be the only thread responsible * for making the CPU idle and triggering any type of power management. * However, in some more constrained systems, such as a single-threaded system, * the only thread would be responsible for this if needed. * * @note In some architectures, before returning, the function unmasks interrupts * unconditionally. */ static inline void k_cpu_idle(void) { arch_cpu_idle(); } /** * @brief Make the CPU idle in an atomic fashion. * * Similar to k_cpu_idle(), but must be called with interrupts locked. * * Enabling interrupts and entering a low-power mode will be atomic, * i.e. there will be no period of time where interrupts are enabled before * the processor enters a low-power mode. * * After waking up from the low-power mode, the interrupt lockout state will * be restored as if by irq_unlock(key). * * @param key Interrupt locking key obtained from irq_lock(). */ static inline void k_cpu_atomic_idle(unsigned int key) { arch_cpu_atomic_idle(key); } /** * @} */ /** * @cond INTERNAL_HIDDEN * @internal */ #ifdef ARCH_EXCEPT /* This architecture has direct support for triggering a CPU exception */ #define z_except_reason(reason) ARCH_EXCEPT(reason) #else #if !defined(CONFIG_ASSERT_NO_FILE_INFO) #define __EXCEPT_LOC() __ASSERT_PRINT("@ %s:%d\n", __FILE__, __LINE__) #else #define __EXCEPT_LOC() #endif /* NOTE: This is the implementation for arches that do not implement * ARCH_EXCEPT() to generate a real CPU exception. * * We won't have a real exception frame to determine the PC value when * the oops occurred, so print file and line number before we jump into * the fatal error handler. */ #define z_except_reason(reason) do { \ __EXCEPT_LOC(); \ z_fatal_error(reason, NULL); \ } while (false) #endif /* _ARCH__EXCEPT */ /** * INTERNAL_HIDDEN @endcond */ /** * @brief Fatally terminate a thread * * This should be called when a thread has encountered an unrecoverable * runtime condition and needs to terminate. What this ultimately * means is determined by the _fatal_error_handler() implementation, which * will be called will reason code K_ERR_KERNEL_OOPS. * * If this is called from ISR context, the default system fatal error handler * will treat it as an unrecoverable system error, just like k_panic(). */ #define k_oops() z_except_reason(K_ERR_KERNEL_OOPS) /** * @brief Fatally terminate the system * * This should be called when the Zephyr kernel has encountered an * unrecoverable runtime condition and needs to terminate. What this ultimately * means is determined by the _fatal_error_handler() implementation, which * will be called will reason code K_ERR_KERNEL_PANIC. */ #define k_panic() z_except_reason(K_ERR_KERNEL_PANIC) /** * @cond INTERNAL_HIDDEN */ /* * private APIs that are utilized by one or more public APIs */ /** * @internal */ #ifdef CONFIG_MULTITHREADING /** * @internal */ void z_init_static_threads(void); #else /** * @internal */ #define z_init_static_threads() do { } while (false) #endif /** * @internal */ void z_timer_expiration_handler(struct _timeout *t); /** * INTERNAL_HIDDEN @endcond */ #ifdef CONFIG_PRINTK /** * @brief Emit a character buffer to the console device * * @param c String of characters to print * @param n The length of the string * */ __syscall void k_str_out(char *c, size_t n); #endif /** * @defgroup float_apis Floating Point APIs * @ingroup kernel_apis * @{ */ /** * @brief Disable preservation of floating point context information. * * This routine informs the kernel that the specified thread * will no longer be using the floating point registers. * * @warning * Some architectures apply restrictions on how the disabling of floating * point preservation may be requested, see arch_float_disable. * * @warning * This routine should only be used to disable floating point support for * a thread that currently has such support enabled. * * @param thread ID of thread. * * @retval 0 On success. * @retval -ENOTSUP If the floating point disabling is not implemented. * -EINVAL If the floating point disabling could not be performed. */ __syscall int k_float_disable(struct k_thread *thread); /** * @brief Enable preservation of floating point context information. * * This routine informs the kernel that the specified thread * will use the floating point registers. * Invoking this routine initializes the thread's floating point context info * to that of an FPU that has been reset. The next time the thread is scheduled * by z_swap() it will either inherit an FPU that is guaranteed to be in a * "sane" state (if the most recent user of the FPU was cooperatively swapped * out) or the thread's own floating point context will be loaded (if the most * recent user of the FPU was preempted, or if this thread is the first user * of the FPU). Thereafter, the kernel will protect the thread's FP context * so that it is not altered during a preemptive context switch. * * The @a options parameter indicates which floating point register sets will * be used by the specified thread. * * For x86 options: * * - K_FP_REGS indicates x87 FPU and MMX registers only * - K_SSE_REGS indicates SSE registers (and also x87 FPU and MMX registers) * * @warning * Some architectures apply restrictions on how the enabling of floating * point preservation may be requested, see arch_float_enable. * * @warning * This routine should only be used to enable floating point support for * a thread that currently has such support enabled. * * @param thread ID of thread. * @param options architecture dependent options * * @retval 0 On success. * @retval -ENOTSUP If the floating point enabling is not implemented. * -EINVAL If the floating point enabling could not be performed. */ __syscall int k_float_enable(struct k_thread *thread, unsigned int options); /** * @} */ /** * @brief Get the runtime statistics of a thread * * @param thread ID of thread. * @param stats Pointer to struct to copy statistics into. * @return -EINVAL if null pointers, otherwise 0 */ int k_thread_runtime_stats_get(k_tid_t thread, k_thread_runtime_stats_t *stats); /** * @brief Get the runtime statistics of all threads * * @param stats Pointer to struct to copy statistics into. * @return -EINVAL if null pointers, otherwise 0 */ int k_thread_runtime_stats_all_get(k_thread_runtime_stats_t *stats); /** * @brief Enable gathering of runtime statistics for specified thread * * This routine enables the gathering of runtime statistics for the specified * thread. * * @param thread ID of thread * @return -EINVAL if invalid thread ID, otherwise 0 */ int k_thread_runtime_stats_enable(k_tid_t thread); /** * @brief Disable gathering of runtime statistics for specified thread * * This routine disables the gathering of runtime statistics for the specified * thread. * * @param thread ID of thread * @return -EINVAL if invalid thread ID, otherwise 0 */ int k_thread_runtime_stats_disable(k_tid_t thread); /** * @brief Enable gathering of system runtime statistics * * This routine enables the gathering of system runtime statistics. Note that * it does not affect the gathering of similar statistics for individual * threads. */ void k_sys_runtime_stats_enable(void); /** * @brief Disable gathering of system runtime statistics * * This routine disables the gathering of system runtime statistics. Note that * it does not affect the gathering of similar statistics for individual * threads. */ void k_sys_runtime_stats_disable(void); #ifdef __cplusplus } #endif #include #include #endif /* !_ASMLANGUAGE */ #endif /* ZEPHYR_INCLUDE_KERNEL_H_ */