# # Copyright (c) 2023 bytes at work AG # # SPDX-License-Identifier: Apache-2.0 # description: STM32 MIPI DSI host compatible: "st,stm32-mipi-dsi" include: [mipi-dsi-host.yaml, reset-device.yaml] properties: clocks: required: true clock-names: required: true description: | "dsiclk" DSI clock enable. "refclk" External crystal or oscillator clock. "pixelclk" LTDC pixel clock. "refclk" and "pixelclk" are only used to retrieve the frequency for timing calculation. resets: required: true hs-active-high: type: boolean description: | DSI host horizontal synchronization is active high. vs-active-high: type: boolean description: | DSI host vertical synchronization is active high. de-active-high: type: boolean description: | DSI host data enable is active high. non-continuous: type: boolean description: | DSI host enable non continuous clock. pll-ndiv: required: true type: int description: | DSI host dedicated PLL loop division factor. pll-idf: required: true type: int description: | DSI host dedicated PLL input division factor. pll-odf: required: true type: int description: | DSI HOST dedicated PLL output division factor. active-errors: type: int description: | Indicates which error interrupts will be enabled. This parameter can be any combination of DSI_Error_Data_Type and defaults to HAL_DSI_ERROR_NONE. lp-rx-filter: type: int description: | Use Low-Power Reception Filter. Cutoff frequency of low-pass filter at the input of LPRX. Defaults to 0 which disables the filter. host-timeouts: type: array description: | DSI HOST timeout parameters. phy-timings: type: array description: | DSI HOST PHY timing parameters. test-pattern: type: int enum: - 0 - 1 description: | Show DSI host color bars, select color bar orientation 0 : Vertical color bars 1 : Horizontal color bars