/*
 * Copyright (c) 2021 Rafael Dias Menezes <rdmeneze@gmail.com>
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <arm/armv7-m.dtsi>
#include <zephyr/dt-bindings/gpio/gpio.h>
#include <zephyr/dt-bindings/i2c/i2c.h>
#include "gpio_gecko.h"

/ {
	chosen {
		zephyr,flash-controller = &msc;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

	};

	sram0: memory@20000000 {
	       compatible = "mmio-sram";
	};

	soc {
		msc: flash-controller@400e0000 {
			compatible = "silabs,gecko-flash-controller";
			reg = <0x400e0000 0x800>;
			interrupts = <24 0>;

			#address-cells = <1>;
			#size-cells = <1>;

			flash0: flash@0 {
				compatible = "soc-nv-flash";
				write-block-size = <4>;
				erase-block-size = <2048>;
			};
		};

		usart0: usart@40010000 { /* USART0 */
			compatible = "silabs,gecko-usart";
			reg = <0x40010000 0x400>;
			interrupts = <11 0 12 0>;
			interrupt-names = "rx", "tx";
			peripheral-id = <0>;
			status = "disabled";
		};

		usart1: usart@40010400 { /* USART1 */
			compatible = "silabs,gecko-usart";
			reg = <0x40010400 0x400>;
			interrupts = <19 0 20 0>;
			interrupt-names = "rx", "tx";
			peripheral-id = <1>;
			status = "disabled";
		};

		leuart0: leuart@4004a000 { /* LEUART0 */
			compatible = "silabs,gecko-leuart";
			reg = <0x4004a000 0x400>;
			interrupts = <21 0>;
			peripheral-id = <0>;
			status = "disabled";
		};

		i2c0: i2c@4000c000 {
			compatible = "silabs,gecko-i2c";
			clock-frequency = <I2C_BITRATE_STANDARD>;
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x4000c000 0x400>;
			interrupts = <16 0>;
			status = "disabled";
		};

		rtcc0: rtcc@40042000 {
			compatible = "silabs,gecko-rtcc";
			reg = <0x40042000 0x184>;
			interrupts = <29 0>;
			clock-frequency = <32768>;
			prescaler = <1>;
			status = "disabled";
		};

		gpio: gpio@4000a400 {
			compatible = "silabs,gecko-gpio";
			reg = <0x4000a400 0xf00>;
			interrupts = <9 2 17 2>;
			interrupt-names = "GPIO_EVEN", "GPIO_ODD";

			ranges;
			#address-cells = <1>;
			#size-cells = <1>;

			gpioa: gpio@4000a000 {
				compatible = "silabs,gecko-gpio-port";
				reg = <0x4000a000 0x30>;
				peripheral-id = <0>;
				gpio-controller;
				#gpio-cells = <2>;
				status = "disabled";
			};

			gpiob: gpio@4000a030 {
				compatible = "silabs,gecko-gpio-port";
				reg = <0x4000a030 0x30>;
				peripheral-id = <1>;
				gpio-controller;
				#gpio-cells = <2>;
				status = "disabled";
			};

			gpioc: gpio@4000a060 {
				compatible = "silabs,gecko-gpio-port";
				reg = <0x4000a060 0x30>;
				peripheral-id = <2>;
				gpio-controller;
				#gpio-cells = <2>;
				status = "disabled";
			};

			gpiod: gpio@4000a090 {
				compatible = "silabs,gecko-gpio-port";
				reg = <0x4000a090 0x30>;
				peripheral-id = <3>;
				gpio-controller;
				#gpio-cells = <2>;
				status = "disabled";
			};

			gpiof: gpio@4000a0f0 {
				compatible = "silabs,gecko-gpio-port";
				reg = <0x4000a0f0 0x30>;
				peripheral-id = <5>;
				gpio-controller;
				#gpio-cells = <2>;
				status = "disabled";
			};
			pinctrl: pin-controller {
				/* Pin controller is a "virtual" device since SiLabs SoCs do pin
				 * control in a distributed way (GPIO registers and PSEL
				 * registers on each peripheral).
				 */
				 compatible = "silabs,gecko-pinctrl";
			};
		};

                wdog0: wdog@40052000 {
                        compatible = "silabs,gecko-wdog";
                        reg = <0x40052000 0x400>;
                        peripheral-id = <0>;
                        interrupts = <2 0>;
                        status = "disabled";
                };
	};
};

&nvic {
	arm,num-irq-priority-bits = <3>;
};