/*
 * Copyright (c) 2018, Cypress
 * Copyright (c) 2020-2021, ATL Electronics
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <mem.h>
#include <zephyr/dt-bindings/gpio/gpio.h>

#include "psoc6-pinctrl.dtsi"

/ {
	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-m0+";
			reg = <0>;
		};
		cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-m4f";
			reg = <1>;
		};
	};

	flash-controller@40250000 {
			compatible = "cypress,psoc6-flash-controller";
			reg = <0x40250000 0x10000>;

			#address-cells = <1>;
			#size-cells = <1>;


			flash0: flash@10000000 {
				compatible = "soc-nv-flash";
				reg = <0x10000000 DT_SIZE_K(384)>;
				write-block-size = <4>;
			};

			flash1: flash@10060000 {
				compatible = "soc-nv-flash";
				reg = <0x10060000 DT_SIZE_K(640)>;
				write-block-size = <4>;
			};
	};

	sram0: memory@8000000 {
		compatible = "mmio-sram";
		reg = <0x08000000 DT_SIZE_K(140)>;
	};

	sram1: memory@8023000 {
		compatible = "zephyr,memory-region", "mmio-sram";
		reg = <0x08023000 DT_SIZE_K(4)>;
		zephyr,memory-region = "SRAM1";
	};

	sram2: memory@8024000 {
		compatible = "zephyr,memory-region", "mmio-sram";
		reg = <0x08024000 DT_SIZE_K(112)>;
		zephyr,memory-region = "SRAM2";
	};

	soc {
		pinctrl@40310000 {
			compatible = "cypress,psoc6-pinctrl";
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x40310000 0x40310000 0x2024>;

			hsiom: hsiom@40310000 {
				compatible = "cypress,psoc6-hsiom";
				reg = <0x40310000 0x2024>;
				interrupts = <15 1>, <16 1>;
				status = "disabled";
			};

			gpio_prt0: gpio@40320000 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320000 0x80>;
				interrupts = <0 1>;
				gpio-controller;
				ngpios = <6>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt1: gpio@40320080 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320080 0x80>;
				interrupts = <1 1>;
				gpio-controller;
				ngpios = <6>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt2: gpio@40320100 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320100 0x80>;
				interrupts = <2 1>;
				gpio-controller;
				ngpios = <8>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt3: gpio@40320180 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320180 0x80>;
				interrupts = <3 1>;
				gpio-controller;
				ngpios = <6>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt4: gpio@40320200 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320200 0x80>;
				interrupts = <4 1>;
				gpio-controller;
				ngpios = <4>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt5: gpio@40320280 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320280 0x80>;
				interrupts = <5 1>;
				gpio-controller;
				ngpios = <8>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt6: gpio@40320300 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320300 0x80>;
				interrupts = <6 1>;
				gpio-controller;
				ngpios = <8>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt7: gpio@40320380 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320380 0x80>;
				interrupts = <7 1>;
				gpio-controller;
				ngpios = <8>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt8: gpio@40320400 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320400 0x80>;
				interrupts = <8 1>;
				gpio-controller;
				ngpios = <8>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt9: gpio@40320480 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320480 0x80>;
				interrupts = <9 1>;
				gpio-controller;
				ngpios = <8>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt10: gpio@40320500 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320500 0x80>;
				interrupts = <10 1>;
				gpio-controller;
				ngpios = <8>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt11: gpio@40320580 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320580 0x80>;
				interrupts = <11 1>;
				gpio-controller;
				ngpios = <8>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt12: gpio@40320600 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320600 0x80>;
				interrupts = <12 1>;
				gpio-controller;
				ngpios = <8>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt13: gpio@40320680 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320680 0x80>;
				interrupts = <13 1>;
				gpio-controller;
				ngpios = <8>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
			gpio_prt14: gpio@40320700 {
				compatible = "cypress,psoc6-gpio";
				reg = <0x40320700 0x80>;
				interrupts = <14 1>;
				gpio-controller;
				ngpios = <2>;
				#gpio-cells = <2>;
				#cypress,pin-cells = <2>;
				status = "disabled";
			};
		};

		spi0: spi@40610000 {
			compatible = "cypress,psoc6-spi";
			reg = <0x40610000 0x10000>;
			interrupts = <41 6>;
			peripheral-id = <0>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};
		spi1: spi@40620000 {
			compatible = "cypress,psoc6-spi";
			reg = <0x40620000 0x10000>;
			interrupts = <42 6>;
			peripheral-id = <1>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};
		spi2: spi@40630000 {
			compatible = "cypress,psoc6-spi";
			reg = <0x40630000 0x10000>;
			interrupts = <43 6>;
			peripheral-id = <2>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};
		spi3: spi@40640000 {
			compatible = "cypress,psoc6-spi";
			reg = <0x40640000 0x10000>;
			interrupts = <44 6>;
			peripheral-id = <3>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};
		spi4: spi@40650000 {
			compatible = "cypress,psoc6-spi";
			reg = <0x40650000 0x10000>;
			interrupts = <45 6>;
			peripheral-id = <4>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};
		spi5: spi@40660000 {
			compatible = "cypress,psoc6-spi";
			reg = <0x40660000 0x10000>;
			interrupts = <46 6>;
			peripheral-id = <5>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};
		spi6: spi@40670000 {
			compatible = "cypress,psoc6-spi";
			reg = <0x40670000 0x10000>;
			interrupts = <47 6>;
			peripheral-id = <6>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};
		spi7: spi@40680000 {
			compatible = "cypress,psoc6-spi";
			reg = <0x40680000 0x10000>;
			interrupts = <48 6>;
			peripheral-id = <7>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};
		spi8: spi@40690000 {
			compatible = "cypress,psoc6-spi";
			reg = <0x40690000 0x10000>;
			interrupts = <18 6>;
			peripheral-id = <8>;
			status = "disabled";
			#address-cells = <1>;
			#size-cells = <0>;
		};

		uart0: uart@40610000 {
			compatible = "cypress,psoc6-uart";
			reg = <0x40610000 0x10000>;
			interrupts = <41 6>;
			peripheral-id = <0>;
			status = "disabled";
		};
		uart1: uart@40620000 {
			compatible = "cypress,psoc6-uart";
			reg = <0x40620000 0x10000>;
			interrupts = <42 6>;
			peripheral-id = <1>;
			status = "disabled";
		};
		uart2: uart@40630000 {
			compatible = "cypress,psoc6-uart";
			reg = <0x40630000 0x10000>;
			interrupts = <43 6>;
			peripheral-id = <2>;
			status = "disabled";
		};
		uart3: uart@40640000 {
			compatible = "cypress,psoc6-uart";
			reg = <0x40640000 0x10000>;
			interrupts = <44 6>;
			peripheral-id = <3>;
			status = "disabled";
		};
		uart4: uart@40650000 {
			compatible = "cypress,psoc6-uart";
			reg = <0x40650000 0x10000>;
			interrupts = <45 6>;
			peripheral-id = <4>;
			status = "disabled";
		};
		uart5: uart@40660000 {
			compatible = "cypress,psoc6-uart";
			reg = <0x40660000 0x10000>;
			interrupts = <46 6>;
			peripheral-id = <5>;
			status = "disabled";
		};
		uart6: uart@40670000 {
			compatible = "cypress,psoc6-uart";
			reg = <0x40670000 0x10000>;
			interrupts = <47 6>;
			peripheral-id = <6>;
			status = "disabled";
		};
		uart7: uart@40680000 {
			compatible = "cypress,psoc6-uart";
			reg = <0x40680000 0x10000>;
			interrupts = <48 6>;
			peripheral-id = <7>;
			status = "disabled";
		};
		uart8: uart@40690000 {
			compatible = "cypress,psoc6-uart";
			reg = <0x40690000 0x10000>;
			interrupts = <18 6>;
			peripheral-id = <8>;
			status = "disabled";
		};

		uid: device_uid@16000600 {
			compatible = "cypress,psoc6-uid";
			reg = <0x16000600 0xb>;
			status = "okay";
		};
	};
};