/*
 * Copyright (c) 2019 STMicroelectronics
 *
 * SPDX-License-Identifier: Apache-2.0
 */

&arduino_spi {
	cs-gpios = <&arduino_header 1 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;	      /* A1 */

	spbtle_rf_x_nucleo_idb05a1: spbtle-rf@0 {
		compatible = "zephyr,bt-hci-spi";
		reg = <0>;
		reset-gpios = <&arduino_header 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* D7 */
		irq-gpios = <&arduino_header 0 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>;  /* A0 */
		spi-max-frequency = <2000000>;
		controller-data-delay-us = <0>;  /* No need for extra delay for BlueNRG-MS */
	};
};