/*
 * Copyright 2023 NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include "vmu_rt1170-pinctrl.dtsi"

/ {
	aliases {
		led0 = &green_led;
		led1 = &red_led;
		led2 = &blue_led;
		sdhc0 = &usdhc1;
	};

	leds {
		compatible = "gpio-leds";
		green_led: led-1 {
			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
			label = "Green LED";
		};

		red_led: led-2 {
			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
			label = "Red LED";
		};

		blue_led: led-3 {
			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
			label = "Blue LED";
		};
	};
};

&semc {
	status = "disabled";
};

&lpuart1 {
	status = "okay";
	pinctrl-0 = <&pinmux_lpuart1>;
	pinctrl-names = "default";
	current-speed = <115200>;
};

&lpuart3 {
	status = "okay";
	pinctrl-0 = <&pinmux_lpuart3>;
	pinctrl-names = "default";
	current-speed = <115200>;
};

&lpuart4 {
	status = "okay";
	pinctrl-0 = <&pinmux_lpuart4>;
	pinctrl-names = "default";
	current-speed = <115200>;
};

&lpuart5 {
	status = "okay";
	pinctrl-0 = <&pinmux_lpuart5>;
	pinctrl-names = "default";
	current-speed = <115200>;
};

&lpuart6 {
	status = "okay";
	pinctrl-0 = <&pinmux_lpuart6>;
	pinctrl-names = "default";
	current-speed = <115200>;
};

&lpuart8 {
	status = "okay";
	pinctrl-0 = <&pinmux_lpuart8>;
	pinctrl-names = "default";
	current-speed = <115200>;
};

&lpuart10 {
	status = "okay";
	pinctrl-0 = <&pinmux_lpuart10>;
	pinctrl-names = "default";
	current-speed = <115200>;
};

&lpuart11 {
	status = "okay";
	pinctrl-0 = <&pinmux_lpuart11>;
	pinctrl-names = "default";
	current-speed = <115200>;
};

&green_led {
	status = "okay";
};

&enet1g {
	pinctrl-0 = <&pinmux_enet>;
	pinctrl-names = "default";
};

&flexcan1 {
	pinctrl-0 = <&pinmux_flexcan1>;
	pinctrl-names = "default";
};

&flexcan2 {
	pinctrl-0 = <&pinmux_flexcan2>;
	pinctrl-names = "default";
};

&flexcan3 {
	pinctrl-0 = <&pinmux_flexcan3>;
	pinctrl-names = "default";
};

&lpi2c1 {
	pinctrl-0 =<&pinmux_lpi2c1>;
	pinctrl-names = "default";
};

&lpi2c2 {
	pinctrl-0 =<&pinmux_lpi2c2>;
	pinctrl-names = "default";
};

&lpi2c3 {
	pinctrl-0 =<&pinmux_lpi2c3>;
	pinctrl-names = "default";
};

&lpi2c6 {
	pinctrl-0 =<&pinmux_lpi2c6>;
	pinctrl-names = "default";
};

&lpspi1 {
	pinctrl-0 = <&pinmux_lpspi1>;
	pinctrl-names = "default";
};

&lpspi2 {
	pinctrl-0 = <&pinmux_lpspi2>;
	pinctrl-names = "default";
};

&lpspi3 {
	pinctrl-0 = <&pinmux_lpspi3>;
	pinctrl-names = "default";
};

&lpspi6 {
	pinctrl-0 = <&pinmux_lpspi6>;
	pinctrl-names = "default";
};

&lpadc1 {
	pinctrl-0 = <&pinmux_lpadc1>;
	pinctrl-names = "default";
};

&flexspi {
	pinctrl-0 = <&pinmux_flexspi1>;
	pinctrl-names = "default";
};

&usdhc1 {
	pinctrl-0 = <&pinmux_usdhc1>;
	pinctrl-names = "default";
};

&flexspi {
	status = "okay";
	ahb-prefetch;
	ahb-read-addr-opt;
	rx-clock-source = <1>;
	reg = <0x400cc000 0x4000>, <0x30000000 DT_SIZE_M(16)>;
	mx25um51345g: mx25um51345g@0 {
		compatible = "nxp,imx-flexspi-mx25um51345g";
		/* MX25UM51245G is 64MB, 512MBit flash part */
		size = <DT_SIZE_M(64 * 8)>;
		reg = <0>;
		spi-max-frequency = <200000000>;
		status = "okay";
		jedec-id = [c2 81 3a];
		erase-block-size = <4096>;
		write-block-size = <16>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			boot_partition: partition@0 {
				label = "mcuboot";
				reg = <0x00000000 DT_SIZE_K(128)>;
			};
			slot0_partition: partition@20000 {
				label = "image-0";
				reg = <0x00020000 DT_SIZE_K(3076)>;
			};
			slot1_partition: partition@321000 {
				label = "image-1";
				reg = <0x00321000 DT_SIZE_K(3072)>;
			};
			storage_partition: partition@621000 {
				label = "storage";
				reg = <0x00621000 DT_SIZE_M(57)>;
			};
		};
	};
};