.. _lpcxpresso55s36: NXP LPCXpresso55S36 ################### Overview ******** The LPCXpresso55S36 board provides the ideal platform for evaluation of the LPC55S3x/LPC553x MCU family, based on the Arm® Cortex®-M33 architecture. Arduino® UNO compatible shield connectors are included, with additional expansion ports around the Arduino footprint, along with a PMod/host interface port and MikroElektronika Click module site. .. image:: lpcxpresso55S36.jpg :align: center :alt: LPCXpresso55S36 Hardware ******** - LPC55S36 Arm® Cortex®-M33 microcontroller running at up to 150 MHz - 256 KB flash and 96 KB SRAM on-chip - LPC-Link2 debug high speed USB probe with VCOM port - I2C and SPI USB bridging to the LPC device via LPC-Link2 probe - MikroElektronika Click expansion option - LPCXpresso expansion connectors compatible with Arduino UNO - PMod compatible expansion / host connector - Reset, ISP, wake, and user buttons for easy testing of software functionality - Tri-color LED - Full-speed USB device / host port - High-speed USB device / host port - UART header for external serial to USB cable - CAN Transceiver - Stereo audio codec with in/out line For more information about the LPC55S36 SoC and LPCXPresso55S36 board, see: - `LPC55S36 SoC Website`_ - `LPC55S36 Datasheet`_ - `LPC55S36 User Manual`_ - `LPCXpresso55S36 Website`_ - `LPCXpresso55S36 User Manual`_ - `LPCXpresso55S36 Development Board Design Files`_ Supported Features ================== NXP considers the LPCXpresso55S36 as a superset board for the LPC55(S)3x family of MCUs. This board is a focus for NXP's Full Platform Support for Zephyr, to better enable the entire LPC55(S)3x family. NXP prioritizes enabling this board with new support for Zephyr features. The lpcxpresso55s36 board configuration supports the hardware features below. Another similar superset board is the :ref:`lpcxpresso55s69`, and that board may have additional features already supported, which can also be re-used on this lpcxpresso55s36 board: +-----------+------------+-------------------------------------+ | Interface | Controller | Driver/Component | +===========+============+=====================================+ | NVIC | on-chip | nested vector interrupt controller | +-----------+------------+-------------------------------------+ | SYSTICK | on-chip | systick | +-----------+------------+-------------------------------------+ | IOCON | on-chip | pinmux | +-----------+------------+-------------------------------------+ | GPIO | on-chip | gpio | +-----------+------------+-------------------------------------+ | USART | on-chip | serial port-polling; | | | | serial port-interrupt | +-----------+------------+-------------------------------------+ | CLOCK | on-chip | clock_control | +-----------+------------+-------------------------------------+ | CAN | on-chip | canbus | +-----------+------------+-------------------------------------+ | IAP | on-chip | flash | +-----------+------------+-------------------------------------+ | PWM | on-chip | pwm | +-----------+------------+-------------------------------------+ | CSS | on-chip | entropy | +-----------+------------+-------------------------------------+ | USB FS | on-chip | USB Full Speed device | +-----------+------------+-------------------------------------+ | DAC | on-chip | dac | +-----------+------------+-------------------------------------+ Other hardware features are not currently enabled. Currently available targets for this board are: - *lpcxpresso55s36* Connections and IOs =================== The LPC55S36 SoC has IOCON registers, which can be used to configure the functionality of a pin. +---------+-----------------+----------------------------+ | Name | Function | Usage | +=========+=================+============================+ | PIO0_17 | GPIO | USR SW3 | +---------+-----------------+----------------------------+ | PIO0_22 | GPIO | GREEN LED | +---------+-----------------+----------------------------+ | PIO0_28 | GPIO | RED LED | +---------+-----------------+----------------------------+ | PIO0_29 | USART | USART RX | +---------+-----------------+----------------------------+ | PIO0_30 | USART | USART TX | +---------+-----------------+----------------------------+ | PIO1_11 | GPIO | BLUE_LED | +---------+-----------------+----------------------------+ | PIO1_18 | GPIO | Wakeup SW1 | +---------+-----------------+----------------------------+ | PIO1_20 | FLEXPPWM0_PWM0_A| pwm | +---------+-----------------+----------------------------+ | PIO1_17 | FLEXPPWM0_PWM0_B| pwm | +---------+-----------------+----------------------------+ | PIO1_6 | FLEXPPWM0_PWM1_A| pwm | +---------+-----------------+----------------------------+ | PIO1_22 | FLEXPPWM0_PWM1_B| pwm | +---------+-----------------+----------------------------+ | PIO1_8 | FLEXPPWM0_PWM2_A| pwm | +---------+-----------------+----------------------------+ | PIO1_4 | FLEXPPWM0_PWM2_B| pwm | +---------+-----------------+----------------------------+ | PIO1_21 | FLEXPPWM1_PWM0_A| pwm | +---------+-----------------+----------------------------+ | PIO0_3 | FLEXPPWM1_PWM0_B| pwm | +---------+-----------------+----------------------------+ | PIO1_23 | FLEXPPWM1_PWM1_A| pwm | +---------+-----------------+----------------------------+ | PIO0_21 | FLEXPPWM1_PWM1_B| pwm | +---------+-----------------+----------------------------+ | PIO1_25 | FLEXPPWM1_PWM2_A| pwm | +---------+-----------------+----------------------------+ | PIO0_31 | FLEXPPWM1_PWM2_B| pwm | +---------+-----------------+----------------------------+ | PIO1_2 | CAN0_TXD | CAN TX | +---------+-----------------+----------------------------+ | PIO1_3 | CAN0_RXD | CAN RX | +---------+-----------------+----------------------------+ | PIO0_22 | USB0_VBUS | USBFS VBUS | +---------+-----------------+----------------------------+ System Clock ============ The LPC55S36 SoC is configured to use PLL1 clocked from the external 24MHz crystal, running at 144MHz as a source for the system clock. When the flash controller is enabled, the core clock will be reduced to 96MHz. Other sources for the system clock are provided in the SOC, depending on your system requirements. Serial Port =========== The LPC55S36 SoC has 8 FLEXCOMM interfaces for serial communication. One is configured as USART for the console and the remaining are not used. Programming and Debugging ************************* Build and flash applications as usual (see :ref:`build_an_application` and :ref:`application_run` for more details). Configuring a Debug Probe ========================= A debug probe is used for both flashing and debugging the board. This board is configured by default to use the LPC-Link2 CMSIS-DAP Onboard Debug Probe, however the :ref:`pyocd-debug-host-tools` does not yet support the LPC55S36 so you must reconfigure the board for one of the J-Link debug probe instead. First install the :ref:`jlink-debug-host-tools` and make sure they are in your search path. Then follow the instructions in :ref:`lpclink2-jlink-onboard-debug-probe` to program the J-Link firmware. Please make sure you have the latest firmware for this board. Configuring a Console ===================== Connect a USB cable from your PC to J1 (LINK2), and use the serial terminal of your choice (minicom, putty, etc.) with the following settings: - Speed: 115200 - Data: 8 bits - Parity: None - Stop bits: 1 Flashing ======== Here is an example for the :ref:`hello_world` application. .. zephyr-app-commands:: :zephyr-app: samples/hello_world :board: lpcxpresso55s36 :goals: flash Open a serial terminal, reset the board (press the RESET button), and you should see the following message in the terminal: .. code-block:: console ***** Booting Zephyr OS v2.2.0 ***** Hello World! lpcxpresso55s36 Debugging ========= Here is an example for the :ref:`hello_world` application. .. zephyr-app-commands:: :zephyr-app: samples/hello_world :board: lpcxpresso55s36 :goals: debug Open a serial terminal, step through the application in your debugger, and you should see the following message in the terminal: .. code-block:: console ***** Booting Zephyr OS zephyr-v2.2.0 ***** Hello World! lpcxpresso55s36 .. _LPC55S36 SoC Website: https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc5500-cortex-m33/lpc553x-s3x-advanced-analog-armcortex-m33-based-mcu-family:LPC553x .. _LPC55S36 Datasheet: https://www.nxp.com/docs/en/data-sheet/LPC553x.pdf .. _LPC55S36 User Manual: https://www.nxp.com/docs/en/reference-manual/LPC553xRM.pdf .. _LPCxpresso55S36 Website: https://www.nxp.com/design/development-boards/lpcxpresso-boards/development-board-for-the-lpc553x-family-of-mcus:LPCXpresso55S36 .. _LPCXpresso55S36 User Manual: https://www.nxp.com/docs/en/user-manual/LPCXpresso55S36UM.pdf .. _LPCXpresso55S36 Development Board Design Files: https://www.nxp.com/webapp/Download?colCode=LPCXPRESSO5536_EVK-DESIGN-FILES