/*
 * Copyright (c) 2017 Christian Taedcke
 * Copyright (c) 2019 Lemonbeat GmbH
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include "efm32pg_stk3402a-pinctrl.dtsi"
#include <zephyr/dt-bindings/input/input-event-codes.h>

/ {
	model = "Silicon Labs EFM32PG STK3402A board";

	chosen {
		zephyr,console = &usart0;
		zephyr,shell-uart = &usart0;
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
	};

	/* These aliases are provided for compatibility with samples */
	aliases {
		led0 = &led0;
		led1 = &led1;
		pwm-led0 = &pwm_led0;
		sw0 = &button0;
		sw1 = &button1;
		watchdog0 = &wdog0;
		watchdog1 = &wdog1;
	};

	leds {
		compatible = "gpio-leds";
		led0: led_0 {
			gpios = <&gpiof 4 0>;
			label = "LED 0";
		};
		led1: led_1 {
			gpios = <&gpiof 5 0>;
			label = "LED 1";
		};
	};

	buttons {
		compatible = "gpio-keys";
		button0: button_0 {
			/* gpio flags need validation */
			gpios = <&gpiof 6 GPIO_ACTIVE_LOW>;
			label = "User Push Button 0";
			zephyr,code = <INPUT_KEY_0>;
		};
		button1: button_1 {
			/* gpio flags need validation */
			gpios = <&gpiof 7 GPIO_ACTIVE_LOW>;
			label = "User Push Button 1";
			zephyr,code = <INPUT_KEY_1>;
		};
	};

	pwmleds {
		compatible = "pwm-leds";
		status = "okay";
		pwm_led0: pwm_led0 {
			pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_NORMAL>;
		};
	};
};

&cpu0 {
	clock-frequency = <40000000>;
};

&usart0 {
	current-speed = <115200>;
	pinctrl-0 = <&usart0_default>;
	pinctrl-names = "default";
	status = "okay";
};

&leuart0 {
	current-speed = <9600>;
	location-rx = <GECKO_LOCATION(18) GECKO_PORT_D GECKO_PIN(11)>;
	location-tx = <GECKO_LOCATION(18) GECKO_PORT_D GECKO_PIN(10)>;
	status = "okay";
};

&i2c0 {
	location-sda = <GECKO_LOCATION(15) GECKO_PORT_C GECKO_PIN(10)>;
	location-scl = <GECKO_LOCATION(15) GECKO_PORT_C GECKO_PIN(11)>;
	status = "okay";
};

&rtcc0 {
	prescaler = <1>;
	status = "okay";
};

&timer0 {
	status = "okay";

	pwm0: pwm {
		status = "okay";
		pin-location = <GECKO_LOCATION(28) GECKO_PORT_F GECKO_PIN(4)>;
		prescaler = <1024>;
	};
};

&gpio {
	location-swo = <0>;
	status = "okay";
};

&gpioa {
	status = "okay";

	board-controller-enable {
		gpio-hog;
		gpios = <5 GPIO_ACTIVE_HIGH>;
		output-high;
	};
};

&gpiob {
	status = "okay";
};

&gpiod {
	status = "okay";
};

&gpiof {
	status = "okay";
};

&wdog0 {
	status = "okay";
};

&wdog1 {
	status = "okay";
};


&flash0 {

	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		/* Set 6Kb of storage at the end of the 1024Kb of flash */
		storage_partition: partition@fe800 {
			label = "storage";
			reg = <0x000fe800 0x00001800>;
		};

	};
};

&trng0 {
	status = "okay";
};

&adc0 {
	status = "okay";
};