/* * Copyright (c) 2018 Aurelien Jarno * Copyright (c) 2023 Gerson Fernando Budke * * SPDX-License-Identifier: Apache-2.0 */ #define DT_DRV_COMPAT atmel_sam_trng #include #include #include #include #include #include #include #include struct trng_sam_dev_cfg { Trng *regs; }; static inline bool _ready(Trng * const trng) { #ifdef TRNG_ISR_DATRDY return trng->TRNG_ISR & TRNG_ISR_DATRDY; #else return trng->INTFLAG.bit.DATARDY; #endif } static inline uint32_t _data(Trng * const trng) { #ifdef REG_TRNG_DATA (void) trng; return TRNG->DATA.reg; #else return trng->TRNG_ODATA; #endif } static int entropy_sam_wait_ready(Trng * const trng, uint32_t flags) { /* According to the reference manual, the generator provides * one 32-bit random value every 84 peripheral clock cycles. * MCK may not be smaller than HCLK/4, so it should not take * more than 336 HCLK ticks. Assuming the CPU can do 1 * instruction per HCLK the number of times to loop before * the TRNG is ready is less than 1000. And that is when * assuming the loop only takes 1 instruction. So looping a * million times should be more than enough. */ int timeout = 1000000; while (!_ready(trng)) { if (timeout-- == 0) { return -ETIMEDOUT; } if ((flags & ENTROPY_BUSYWAIT) == 0U) { /* This internal function is used by both get_entropy, * and get_entropy_isr APIs. The later may call this * function with the ENTROPY_BUSYWAIT flag set. In * that case make no assumption that the kernel is * initialized when the function is called; so, just * do busy-wait for the random data to be ready. */ k_yield(); } } return 0; } static int entropy_sam_get_entropy_internal(const struct device *dev, uint8_t *buffer, uint16_t length, uint32_t flags) { const struct trng_sam_dev_cfg *config = dev->config; Trng *const trng = config->regs; while (length > 0) { size_t to_copy; uint32_t value; int res; res = entropy_sam_wait_ready(trng, flags); if (res < 0) { return res; } value = _data(trng); to_copy = MIN(length, sizeof(value)); memcpy(buffer, &value, to_copy); buffer += to_copy; length -= to_copy; } return 0; } static int entropy_sam_get_entropy(const struct device *dev, uint8_t *buffer, uint16_t length) { return entropy_sam_get_entropy_internal(dev, buffer, length, 0); } static int entropy_sam_get_entropy_isr(const struct device *dev, uint8_t *buffer, uint16_t length, uint32_t flags) { uint16_t cnt = length; if ((flags & ENTROPY_BUSYWAIT) == 0U) { const struct trng_sam_dev_cfg *config = dev->config; /* No busy wait; return whatever data is available. */ Trng * const trng = config->regs; do { size_t to_copy; uint32_t value; if (!_ready(trng)) { /* Data not ready */ break; } value = _data(trng); to_copy = MIN(length, sizeof(value)); memcpy(buffer, &value, to_copy); buffer += to_copy; length -= to_copy; } while (length > 0); return cnt - length; } else { /* Allowed to busy-wait */ int ret = entropy_sam_get_entropy_internal(dev, buffer, length, flags); if (ret == 0) { /* Data retrieved successfully. */ return cnt; } return ret; } } static int entropy_sam_init(const struct device *dev) { const struct trng_sam_dev_cfg *config = dev->config; Trng *const trng = config->regs; #ifdef MCLK /* Enable the MCLK */ MCLK->APBCMASK.bit.TRNG_ = 1; /* Enable the TRNG */ trng->CTRLA.bit.ENABLE = 1; #else /* Enable TRNG in PMC */ const struct atmel_sam_pmc_config clock_cfg = SAM_DT_INST_CLOCK_PMC_CFG(0); (void)clock_control_on(SAM_DT_PMC_CONTROLLER, (clock_control_subsys_t)&clock_cfg); /* Enable the TRNG */ trng->TRNG_CR = TRNG_CR_KEY_PASSWD | TRNG_CR_ENABLE; #endif return 0; } static const struct entropy_driver_api entropy_sam_api = { .get_entropy = entropy_sam_get_entropy, .get_entropy_isr = entropy_sam_get_entropy_isr }; static const struct trng_sam_dev_cfg trng_sam_cfg = { .regs = (Trng *)DT_INST_REG_ADDR(0), }; DEVICE_DT_INST_DEFINE(0, entropy_sam_init, NULL, NULL, &trng_sam_cfg, PRE_KERNEL_1, CONFIG_ENTROPY_INIT_PRIORITY, &entropy_sam_api);