/*
 * Copyright (c) 2025 Microchip Technology Inc.
 *
 * SPDX-License-Identifier: Apache-2.0
 */
#include <zephyr/dt-bindings/sensor/mtch9010.h>

&sercom1 {
	status = "okay";
	compatible = "atmel,sam0-uart";
	current-speed = <38400>;
	rxpo = <3>;
	txpo = <1>;

	pinctrl-0 = <&sercom1_default>;
	pinctrl-names = "default";

	my9010: mtch9010 {
		compatible = "microchip,mtch9010";

		uart-config-enable;
		operating-mode = "MTCH9010_CAPACITIVE";
		extended-output-enable;
		extended-output-format = "MTCH9010_OUTPUT_FORMAT_BOTH";
		detect-value = <100>;

		wake-gpios = <&portb 14 GPIO_ACTIVE_LOW>;
		output-gpios = <&portb 15 GPIO_ACTIVE_HIGH>;
		heartbeat-gpios = <&porta 20 GPIO_ACTIVE_HIGH>;
	};
};