/* * Trace Recorder for Tracealyzer v4.6.6 * Copyright 2021 Percepio AB * www.percepio.com * * SPDX-License-Identifier: Apache-2.0 * * The generic core of the trace recorder's snapshot mode. */ #include #if (TRC_CFG_RECORDER_MODE == TRC_RECORDER_MODE_SNAPSHOT) #if (TRC_USE_TRACEALYZER_RECORDER == 1) #include #include #ifndef TRC_CFG_RECORDER_DATA_INIT #define TRC_CFG_RECORDER_DATA_INIT 1 #endif #if ((TRC_HWTC_TYPE == TRC_CUSTOM_TIMER_INCR) || (TRC_HWTC_TYPE == TRC_CUSTOM_TIMER_DECR)) #error "CUSTOM timestamping mode is not (yet) supported in snapshot mode!" #endif /* DO NOT CHANGE */ #define TRACE_MINOR_VERSION 7 /* Keeps track of the task's stack low mark */ typedef struct { void* tcb; uint32_t uiPreviousLowMark; } TaskStackMonitorEntry_t; TraceKernelPortDataBuffer_t xKernelPortDataBuffer; #if (TRC_CFG_INCLUDE_ISR_TRACING == 1) /******************************************************************************* * isrstack * * Keeps track of nested interrupts. ******************************************************************************/ static traceHandle isrstack[TRC_CFG_MAX_ISR_NESTING]; /******************************************************************************* * isPendingContextSwitch * * Used to indicate if there is a pending context switch. * If there is a pending context switch the recorder will not create an event * when returning from the ISR. ******************************************************************************/ int32_t isPendingContextSwitch = 0; #endif /* (TRC_CFG_INCLUDE_ISR_TRACING == 1) */ /******************************************************************************* * readyEventsEnabled * * This can be used to dynamically disable ready events. ******************************************************************************/ #if !defined TRC_CFG_INCLUDE_READY_EVENTS || TRC_CFG_INCLUDE_READY_EVENTS == 1 static int readyEventsEnabled = 1; #endif /*!defined TRC_CFG_INCLUDE_READY_EVENTS || TRC_CFG_INCLUDE_READY_EVENTS == 1*/ /******************************************************************************* * uiTraceTickCount * * This variable is should be updated by the Kernel tick interrupt. This does * not need to be modified when developing a new timer port. It is preferred to * keep any timer port changes in the HWTC macro definitions, which typically * give sufficient flexibility. ******************************************************************************/ uint32_t uiTraceTickCount = 0; /******************************************************************************* * trace_disable_timestamp * * This can be used to disable timestamps as it will cause * prvTracePortGetTimeStamp() to return the previous timestamp. ******************************************************************************/ uint32_t trace_disable_timestamp = 0; /******************************************************************************* * last_timestamp * * The most recent timestamp. ******************************************************************************/ static uint32_t last_timestamp = 0; /******************************************************************************* * uiTraceSystemState * * Indicates if we are currently performing a context switch or just running application code. ******************************************************************************/ volatile uint32_t uiTraceSystemState = TRC_STATE_IN_STARTUP; /******************************************************************************* * recorder_busy * * Flag that shows if inside a critical section of the recorder. ******************************************************************************/ volatile int recorder_busy = 0; /******************************************************************************* * timestampFrequency * * Holds the value set by vTraceSetFrequency. ******************************************************************************/ uint32_t timestampFrequency = 0; /******************************************************************************* * nISRactive * * The number of currently active (including preempted) ISRs. ******************************************************************************/ int8_t nISRactive = 0; /******************************************************************************* * handle_of_last_logged_task * * The current task. ******************************************************************************/ traceHandle handle_of_last_logged_task = 0; /******************************************************************************* * vTraceStopHookPtr * * Called when the recorder is stopped, set by vTraceSetStopHook. ******************************************************************************/ TRACE_STOP_HOOK vTraceStopHookPtr = (TRACE_STOP_HOOK)0; /******************************************************************************* * init_hwtc_count * * Initial TRC_HWTC_COUNT value, for detecting if the time-stamping source is * enabled. If using the OS periodic timer for time-stamping, this might not * have been configured on the earliest events during the startup. ******************************************************************************/ uint32_t init_hwtc_count; /******************************************************************************* * CurrentFilterMask * * The filter mask that will be checked against each object's FilterGroup to see * if they should be included in the trace or not. ******************************************************************************/ uint16_t CurrentFilterMask TRC_CFG_RECORDER_DATA_ATTRIBUTE; /******************************************************************************* * CurrentFilterGroup * * The current filter group that will be assigned to newly created objects. ******************************************************************************/ uint16_t CurrentFilterGroup TRC_CFG_RECORDER_DATA_ATTRIBUTE; /******************************************************************************* * objectHandleStacks * * A set of stacks that keeps track of available object handles for each class. * The stacks are empty initially, meaning that allocation of new handles will be * based on a counter (for each object class). Any delete operation will * return the handle to the corresponding stack, for reuse on the next allocate. ******************************************************************************/ objectHandleStackType objectHandleStacks TRC_CFG_RECORDER_DATA_ATTRIBUTE; /******************************************************************************* * traceErrorMessage * * The last error message of the recorder. NULL if no error message. ******************************************************************************/ const char* traceErrorMessage TRC_CFG_RECORDER_DATA_ATTRIBUTE; #if defined(TRC_CFG_ENABLE_STACK_MONITOR) && (TRC_CFG_ENABLE_STACK_MONITOR == 1) && (TRC_CFG_SCHEDULING_ONLY == 0) /******************************************************************************* * tasksInStackMonitor * * Keeps track of all stack low marks for tasks. ******************************************************************************/ TaskStackMonitorEntry_t tasksInStackMonitor[TRC_CFG_STACK_MONITOR_MAX_TASKS] TRC_CFG_RECORDER_DATA_ATTRIBUTE; /******************************************************************************* * tasksNotIncluded * * The number of tasks that did not fit in the stack monitor. ******************************************************************************/ int tasksNotIncluded TRC_CFG_RECORDER_DATA_ATTRIBUTE; #endif /* defined(TRC_CFG_ENABLE_STACK_MONITOR) && (TRC_CFG_ENABLE_STACK_MONITOR == 1) && (TRC_CFG_SCHEDULING_ONLY == 0) */ /******************************************************************************* * RecorderData * * The main data structure in snapshot mode, when using the default static memory * allocation (TRC_RECORDER_BUFFER_ALLOCATION_STATIC). The recorder uses a pointer * RecorderDataPtr to access the data, to also allow for dynamic or custom data * allocation (see TRC_CFG_RECORDER_BUFFER_ALLOCATION). ******************************************************************************/ #if (TRC_CFG_RECORDER_BUFFER_ALLOCATION == TRC_RECORDER_BUFFER_ALLOCATION_STATIC) RecorderDataType RecorderData TRC_CFG_RECORDER_DATA_ATTRIBUTE; #endif /* Pointer to the main data structure, when in snapshot mode */ RecorderDataType* RecorderDataPtr TRC_CFG_RECORDER_DATA_ATTRIBUTE; #if (TRC_CFG_RECORDER_DATA_INIT != 0) uint32_t RecorderInitialized = 0; #else /* (TRC_CFG_RECORDER_DATA_INIT != 0) */ uint32_t RecorderInitialized TRC_CFG_RECORDER_DATA_ATTRIBUTE; #endif /* (TRC_CFG_RECORDER_DATA_INIT != 0) */ /*************** Private Functions *******************************************/ static void prvStrncpy(char* dst, const char* src, uint32_t maxLength); static uint8_t prvTraceGetObjectState(uint8_t objectclass, traceHandle id); static void prvTraceGetChecksum(const char *pname, uint8_t* pcrc, uint8_t* plength); static void* prvTraceNextFreeEventBufferSlot(void); static uint16_t prvTraceGetDTS(uint16_t param_maxDTS); static TraceStringHandle_t prvTraceOpenSymbol(const char* name, TraceStringHandle_t userEventChannel); static void prvTraceUpdateCounters(void); void vTraceStoreMemMangEvent(uint32_t ecode, uint32_t address, int32_t signed_size); #if (TRC_CFG_SNAPSHOT_MODE == TRC_SNAPSHOT_MODE_RING_BUFFER) static void prvCheckDataToBeOverwrittenForMultiEntryEvents(uint8_t nEntries); #endif static TraceStringHandle_t prvTraceCreateSymbolTableEntry(const char* name, uint8_t crc6, uint8_t len, TraceStringHandle_t channel); static TraceStringHandle_t prvTraceLookupSymbolTableEntry(const char* name, uint8_t crc6, uint8_t len, TraceStringHandle_t channel); #if (TRC_CFG_INCLUDE_ISR_TRACING == 0) /* ISR tracing is turned off */ void prvTraceIncreaseISRActive(void); void prvTraceDecreaseISRActive(void); #endif /*(TRC_CFG_INCLUDE_ISR_TRACING == 0)*/ #if (TRC_CFG_USE_16BIT_OBJECT_HANDLES == 1) static uint8_t prvTraceGet8BitHandle(traceHandle handle); #else #define prvTraceGet8BitHandle(x) ((uint8_t)x) #endif #if (TRC_CFG_SCHEDULING_ONLY == 0) static uint32_t prvTraceGetParam(uint32_t, uint32_t); #endif /******************************************************************************* * prvTracePortGetTimeStamp * * Returns the current time based on the HWTC macros which provide a hardware * isolation layer towards the hardware timer/counter. * * The HWTC macros and prvTracePortGetTimeStamp is the main porting issue * or the trace recorder library. Typically you should not need to change * the code of prvTracePortGetTimeStamp if using the HWTC macros. * ******************************************************************************/ void prvTracePortGetTimeStamp(uint32_t *puiTimestamp); static void prvTraceTaskInstanceFinish(int8_t direct); /******************************************************************************* * prvTraceInitTimestamps * * This will only be called once the recorder is started, and we can assume that * all hardware has been initialized. ******************************************************************************/ static void prvTraceInitTimestamps(void); static void prvTraceStart(void); static void prvTraceStop(void); #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1)) #if (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 1) static void vTraceUBData_Helper(traceUBChannel channelPair, va_list vl); static void prvTraceUBHelper1(traceUBChannel channel, TraceStringHandle_t eventLabel, TraceStringHandle_t formatLabel, va_list vl); static void prvTraceUBHelper2(traceUBChannel channel, uint32_t* data, uint32_t noOfSlots); #endif /* (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 1) */ #endif /* ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1)) */ uint16_t uiIndexOfObject(traceHandle objecthandle, uint8_t objectclass); /******************************************************************************* * prvTraceError * * Called by various parts in the recorder. Stops the recorder and stores a * pointer to an error message, which is printed by the monitor task. ******************************************************************************/ void prvTraceError(const char* msg); /********* Public Functions **************************************************/ #if (TRC_CFG_RECORDER_BUFFER_ALLOCATION == TRC_RECORDER_BUFFER_ALLOCATION_CUSTOM) traceResult xTraceSetBuffer(TraceRecorderDataBuffer_t* pxBuffer) { if (pxBuffer == 0) { return TRC_FAIL; } RecorderDataPtr = (RecorderDataType*)pxBuffer; return TRC_SUCCESS; } #endif traceResult xTraceGetEventBuffer(void** ppvBuffer, TraceUnsignedBaseType_t* puiSize) { if (ppvBuffer == 0 || puiSize == 0) { return TRC_FAIL; } *ppvBuffer = (void*)RecorderDataPtr; *puiSize = sizeof(RecorderDataType); return TRC_SUCCESS; } traceResult xTraceEnable(uint32_t uiStartOption) { /* Make sure recorder data is initialized */ if (xTraceInitialize() == TRC_FAIL) { return TRC_FAIL; } if (uiStartOption == TRC_START) { if (xTraceKernelPortEnable() == TRC_FAIL) { return TRC_FAIL; } prvTraceInitTimestamps(); prvTraceStart(); } else if (uiStartOption == TRC_START_AWAIT_HOST) { prvTraceError("xTraceEnable(TRC_START_AWAIT_HOST) not allowed in Snapshot mode"); return TRC_FAIL; } else if (uiStartOption != TRC_START_FROM_HOST) { prvTraceError("xTraceEnable(TRC_START_FROM_HOST) not allowed in Snapshot mode"); return TRC_FAIL; } return TRC_SUCCESS; } traceResult xTraceDisable(void) { prvTraceStop(); return TRC_SUCCESS; } void vTraceSetStopHook(TRACE_STOP_HOOK stopHookFunction) { vTraceStopHookPtr = stopHookFunction; } void vTraceClear(void) { TRACE_ALLOC_CRITICAL_SECTION(); trcCRITICAL_SECTION_BEGIN(); RecorderDataPtr->absTimeLastEventSecond = 0; RecorderDataPtr->absTimeLastEvent = 0; RecorderDataPtr->nextFreeIndex = 0; RecorderDataPtr->numEvents = 0; RecorderDataPtr->bufferIsFull = 0; traceErrorMessage = 0; RecorderDataPtr->internalErrorOccured = 0; (void)memset(RecorderDataPtr->eventData, 0, RecorderDataPtr->maxEvents * 4); handle_of_last_logged_task = 0; trcCRITICAL_SECTION_END(); } static void prvTraceStart(void) { traceHandle handle; TRACE_ALLOC_CRITICAL_SECTION(); handle = 0; if (RecorderDataPtr == 0) { TRACE_ASSERT(RecorderDataPtr != 0, "Recorder not initialized. Use vTraceEnable() instead!", TRC_UNUSED); return; } if (RecorderDataPtr->recorderActive == 1) return; /* Already running */ if (traceErrorMessage == 0) { trcCRITICAL_SECTION_BEGIN(); RecorderDataPtr->recorderActive = 1; handle = TRACE_GET_TASK_NUMBER(TRACE_GET_CURRENT_TASK()); if (handle == 0) { /* This occurs if the scheduler is not yet started. This creates a dummy "(startup)" task entry internally in the recorder */ handle = prvTraceGetObjectHandle(TRACE_CLASS_TASK); prvTraceSetObjectName(TRACE_CLASS_TASK, handle, "(startup)"); prvTraceSetPriorityProperty(TRACE_CLASS_TASK, handle, 0); } prvTraceStoreTaskswitch(handle); /* Register the currently running task */ trcCRITICAL_SECTION_END(); } } /******************************************************************************* * prvTraceStop * * Stops the recorder. The recording can be resumed by calling vTraceStart. * This does not reset the recorder. Use vTraceClear if that is desired. ******************************************************************************/ static void prvTraceStop(void) { if (RecorderDataPtr != 0) { RecorderDataPtr->recorderActive = 0; } if (vTraceStopHookPtr != (TRACE_STOP_HOOK)0) { (*vTraceStopHookPtr)(); /* An application call-back function. */ } } /******************************************************************************* * xTraceIsRecorderEnabled * Returns true (1) if the recorder is enabled (i.e. is recording), otherwise 0. ******************************************************************************/ uint32_t xTraceIsRecorderEnabled(void) { if (RecorderInitialized == 1 && RecorderDataPtr != 0) { return RecorderDataPtr->recorderActive; } else { return 0; } } /****************************************************************************** * xTraceIsRecorderInitialized * * Returns true (1) if the recorder is initialized. ******************************************************************************/ uint32_t xTraceIsRecorderInitialized(void) { return RecorderInitialized; } /******************************************************************************* * xTraceErrorGetLast * * Gives the last error message, if any. NULL if no error message is stored. * Any error message is also presented when opening a trace file. ******************************************************************************/ const char* xTraceErrorGetLast(void) { return traceErrorMessage; } /******************************************************************************* * vTraceClearError * * Removes any previous error message generated by recorder calling prvTraceError. * By calling this function, it may be possible to start/restart the trace * despite errors in the recorder, but there is no guarantee that the trace * recorder will work correctly in that case, depending on the type of error. ******************************************************************************/ void vTraceClearError(void) { traceErrorMessage = 0; if (RecorderDataPtr != 0) { RecorderDataPtr->internalErrorOccured = 0; } } /******************************************************************************* * xTraceGetTraceBuffer * * Returns a pointer to the recorder data structure. Use this together with * uiTraceGetTraceBufferSize if you wish to implement an own store/upload * solution, e.g., in case a debugger connection is not available for uploading * the data. ******************************************************************************/ void* xTraceGetTraceBuffer(void) { return RecorderDataPtr; } /******************************************************************************* * uiTraceGetTraceBufferSize * * Gets the size of the recorder data structure. For use together with * vTraceGetTraceBuffer if you wish to implement an own store/upload solution, * e.g., in case a debugger connection is not available for uploading the data. ******************************************************************************/ uint32_t uiTraceGetTraceBufferSize(void) { return sizeof(RecorderDataType); } /******************************************************************************* * prvTraceInitTimestamps * * If vTraceEnable(TRC_INIT) was called BEFORE the clock was initialized, this * function must be called AFTER the clock is initialized to set a proper * initial timestamp value. If vTraceEnable(...) is only called AFTER clock is * initialized, there is no need to call this function. ******************************************************************************/ static void prvTraceInitTimestamps(void) { init_hwtc_count = TRC_HWTC_COUNT; } /****************************************************************************** * prvTraceTaskInstanceFinish * * Private common function for the vTraceTaskInstanceFinishXXX functions. *****************************************************************************/ static void prvTraceTaskInstanceFinish(int8_t direct) { TaskInstanceStatusEvent* tis; uint8_t dts45; TRACE_ALLOC_CRITICAL_SECTION(); trcCRITICAL_SECTION_BEGIN(); if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) { dts45 = (uint8_t)prvTraceGetDTS(0xFF); tis = (TaskInstanceStatusEvent*) prvTraceNextFreeEventBufferSlot(); if (tis != 0) { if (direct == 0) tis->type = TASK_INSTANCE_FINISHED_NEXT_KSE; else tis->type = TASK_INSTANCE_FINISHED_DIRECT; tis->dts = dts45; prvTraceUpdateCounters(); } } trcCRITICAL_SECTION_END(); } /****************************************************************************** * xTraceTaskInstanceFinishedNext(void) * * Marks the current task instance as finished on the next kernel call. * * If that kernel call is blocking, the instance ends after the blocking event * and the corresponding return event is then the start of the next instance. * If the kernel call is not blocking, the viewer instead splits the current * fragment right before the kernel call, which makes this call the first event * of the next instance. * * See also TRC_CFG_USE_IMPLICIT_IFE_RULES in trcConfig.h * * Example: * * while(1) * { * xQueueReceive(CommandQueue, &command, timeoutDuration); * processCommand(command); * xTraceTaskInstanceFinishedNext(); * } *****************************************************************************/ traceResult xTraceTaskInstanceFinishedNext(void) { prvTraceTaskInstanceFinish(0); return TRC_SUCCESS; } /****************************************************************************** * xTraceTaskInstanceFinishedNow(void) * * Marks the current task instance as finished at this very instant. * This makes the viewer to splits the current fragment at this point and begin * a new actor instance. * * See also TRC_CFG_USE_IMPLICIT_IFE_RULES in trcConfig.h * * Example: * * This example will generate two instances for each loop iteration. * The first instance ends at xTraceTaskInstanceFinishedNow(), while the second * instance ends at the next xQueueReceive call. * * while (1) * { * xQueueReceive(CommandQueue, &command, timeoutDuration); * ProcessCommand(command); * xTraceTaskInstanceFinishedNow(); * DoSometingElse(); * xTraceTaskInstanceFinishedNext(); * } *****************************************************************************/ traceResult xTraceTaskInstanceFinishedNow(void) { prvTraceTaskInstanceFinish(1); return TRC_SUCCESS; } /******************************************************************************* * Interrupt recording functions ******************************************************************************/ #if (TRC_CFG_INCLUDE_ISR_TRACING == 1) traceResult xTraceISRRegister(const char* szName, uint32_t uiPriority, TraceISRHandle_t* pxISRHandle) { static TraceISRHandle_t xISRHandle = 0; TRACE_ASSERT(RecorderDataPtr != 0, "Recorder not initialized, call vTraceEnable() first!", TRC_FAIL); TRACE_ASSERT(xISRHandle <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[TRACE_CLASS_ISR], "xTraceSetISRProperties: Invalid value for handle", TRC_FAIL); TRACE_ASSERT(szName != 0, "xTraceSetISRProperties: name == NULL", TRC_FAIL); xISRHandle++; prvTraceSetObjectName(TRACE_CLASS_ISR, xISRHandle, szName); prvTraceSetPriorityProperty(TRACE_CLASS_ISR, xISRHandle, uiPriority); *pxISRHandle = xISRHandle; return TRC_SUCCESS; } traceHandle xTraceSetISRProperties(const char* szName, uint8_t uiPriority) { TraceISRHandle_t xISRHandle; xTraceISRRegister(szName, uiPriority, &xISRHandle); return xISRHandle; } traceResult xTraceISRBegin(TraceISRHandle_t handle) { TRACE_ALLOC_CRITICAL_SECTION(); if (recorder_busy) { /************************************************************************* * This occurs if an ISR calls a trace function, preempting a previous * trace call that is being processed in a different ISR or task. * If this occurs, there is probably a problem in the definition of the * recorder's internal critical sections (TRACE_ENTER_CRITICAL_SECTION and * TRACE_EXIT_CRITICAL_SECTION). They must disable the RTOS tick interrupt * and any other ISRs that calls the trace recorder directly or via * traced kernel functions. The ARM port disables all interrupts using the * PRIMASK register to avoid this issue. *************************************************************************/ prvTraceError("vTraceStoreISRBegin - recorder busy! See code comment."); return TRC_FAIL; } trcCRITICAL_SECTION_BEGIN(); if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) { uint16_t dts4; TRACE_ASSERT(handle != 0, "vTraceStoreISRBegin: Invalid ISR handle (NULL)", TRC_FAIL); TRACE_ASSERT(handle <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[TRACE_CLASS_ISR], "vTraceStoreISRBegin: Invalid ISR handle (> NISR)", TRC_FAIL); dts4 = (uint16_t)prvTraceGetDTS(0xFFFF); if (RecorderDataPtr->recorderActive) /* Need to repeat this check! */ { if (nISRactive < TRC_CFG_MAX_ISR_NESTING) { TSEvent* ts; uint8_t hnd8 = prvTraceGet8BitHandle(handle); isrstack[nISRactive] = handle; nISRactive++; ts = (TSEvent*)prvTraceNextFreeEventBufferSlot(); if (ts != 0) { ts->type = TS_ISR_BEGIN; ts->dts = dts4; ts->objHandle = hnd8; prvTraceUpdateCounters(); } } else { /* This should not occur unless something is very wrong */ prvTraceError("Too many nested interrupts!"); } } } trcCRITICAL_SECTION_END(); return TRC_SUCCESS; } traceResult xTraceISREnd(int pendingISR) { TSEvent* ts; uint16_t dts5; uint8_t hnd8 = 0, type = 0; TRACE_ALLOC_CRITICAL_SECTION(); if (! RecorderDataPtr->recorderActive || ! handle_of_last_logged_task) { return TRC_SUCCESS; } if (recorder_busy) { /************************************************************************* * This occurs if an ISR calls a trace function, preempting a previous * trace call that is being processed in a different ISR or task. * If this occurs, there is probably a problem in the definition of the * recorder's internal critical sections (TRACE_ENTER_CRITICAL_SECTION and * TRACE_EXIT_CRITICAL_SECTION). They must disable the RTOS tick interrupt * and any other ISRs that calls the trace recorder directly or via * traced kernel functions. The ARM port disables all interrupts using the * PRIMASK register to avoid this issue. *************************************************************************/ prvTraceError("vTraceStoreISREnd - recorder busy! See code comment."); return TRC_FAIL; } if (nISRactive == 0) { prvTraceError("Unmatched call to vTraceStoreISREnd (nISRactive == 0, expected > 0)"); return TRC_FAIL; } trcCRITICAL_SECTION_BEGIN(); isPendingContextSwitch |= pendingISR; /* Is there a pending context switch right now? If so, we will not create an event since we will get an event when that context switch is executed. */ nISRactive--; if (nISRactive > 0) { /* Return to another ISR */ type = TS_ISR_RESUME; hnd8 = prvTraceGet8BitHandle(isrstack[nISRactive - 1]); /* isrstack[nISRactive] is the handle of the ISR we're currently exiting. isrstack[nISRactive - 1] is the handle of the ISR that was executing previously. */ } else if ((isPendingContextSwitch == 0) || (xTraceKernelPortIsSchedulerSuspended())) { /* Return to interrupted task, if no context switch will occur in between. */ type = TS_TASK_RESUME; hnd8 = prvTraceGet8BitHandle(handle_of_last_logged_task); } if (type != 0) { dts5 = (uint16_t)prvTraceGetDTS(0xFFFF); ts = (TSEvent*)prvTraceNextFreeEventBufferSlot(); if (ts != 0) { ts->type = type; ts->objHandle = hnd8; ts->dts = dts5; prvTraceUpdateCounters(); } } trcCRITICAL_SECTION_END(); return TRC_SUCCESS; } #else /* ISR tracing is turned off */ void prvTraceIncreaseISRActive(void) { if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) nISRactive++; } void prvTraceDecreaseISRActive(void) { if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) nISRactive--; } #endif /* (TRC_CFG_INCLUDE_ISR_TRACING == 1)*/ /********************************************************************************/ /* User Event functions */ /********************************************************************************/ #define MAX_ARG_SIZE (4+32) #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1)) static uint8_t writeInt8(void * buffer, uint8_t i, uint8_t value) { TRACE_ASSERT(buffer != 0, "writeInt8: buffer == NULL", 0); if (i >= MAX_ARG_SIZE) { return 255; } ((uint8_t*)buffer)[i] = value; if (i + 1 > MAX_ARG_SIZE) { return 255; } return ((uint8_t) (i + 1)); } #endif #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1)) static uint8_t writeInt16(void * buffer, uint8_t i, uint16_t value) { TRACE_ASSERT(buffer != 0, "writeInt16: buffer == NULL", 0); /* Align to multiple of 2 */ while ((i % 2) != 0) { if (i >= MAX_ARG_SIZE) { return 255; } ((uint8_t*)buffer)[i] = 0; i++; } if (i + 2 > MAX_ARG_SIZE) { return 255; } ((uint16_t*)buffer)[i/2] = value; return ((uint8_t) (i + 2)); } #endif #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1)) static uint8_t writeInt32(void * buffer, uint8_t i, uint32_t value) { TRACE_ASSERT(buffer != 0, "writeInt32: buffer == NULL", 0); /* A 32 bit value should begin at an even 4-byte address */ while ((i % 4) != 0) { if (i >= MAX_ARG_SIZE) { return 255; } ((uint8_t*)buffer)[i] = 0; i++; } if (i + 4 > MAX_ARG_SIZE) { return 255; } ((uint32_t*)buffer)[i/4] = value; return ((uint8_t) (i + 4)); } #endif #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1) && (TRC_CFG_INCLUDE_FLOAT_SUPPORT)) static uint8_t writeFloat(void * buffer, uint8_t i, float value) { TRACE_ASSERT(buffer != 0, "writeFloat: buffer == NULL", 0); /* A 32 bit value should begin at an even 4-byte address */ while ((i % 4) != 0) { if (i >= MAX_ARG_SIZE) { return 255; } ((uint8_t*)buffer)[i] = 0; i++; } if (i + 4 > MAX_ARG_SIZE) { return 255; } ((float*)buffer)[i/4] = value; return i + 4; } #endif #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1) && (TRC_CFG_INCLUDE_FLOAT_SUPPORT)) static uint8_t writeDouble(void * buffer, uint8_t i, double value) { uint32_t * dest; uint32_t * src = (uint32_t*)&value; TRACE_ASSERT(buffer != 0, "writeDouble: buffer == NULL", 0); /* The double is written as two 32 bit values, and should begin at an even 4-byte address (to avoid having to align with 8 byte) */ while (i % 4 != 0) { if (i >= MAX_ARG_SIZE) { return 255; } ((uint8_t*)buffer)[i] = 0; i++; } if (i + 8 > MAX_ARG_SIZE) { return 255; } dest = &(((uint32_t *)buffer)[i/4]); dest[0] = src[0]; dest[1] = src[1]; return i + 8; } #endif /******************************************************************************* * prvTraceUserEventFormat * * Parses the format string and stores the arguments in the buffer. ******************************************************************************/ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1)) static uint8_t prvTraceUserEventFormat(const char* formatStr, va_list vl, uint8_t* buffer, uint8_t byteOffset) { uint16_t formatStrIndex = 0; uint8_t argCounter = 0; uint8_t i = byteOffset; while (formatStr[formatStrIndex] != '\0') { if (formatStr[formatStrIndex] == '%') { if (formatStr[formatStrIndex + 1] == '%') { formatStrIndex += 2; continue; } /* We found a possible argument */ argCounter++; formatStrIndex++; while ((formatStr[formatStrIndex] >= '0' && formatStr[formatStrIndex] <= '9') || formatStr[formatStrIndex] == '#' || formatStr[formatStrIndex] == '.') formatStrIndex++; /* This check is necessary to avoid moving past end of string. */ if (formatStr[formatStrIndex] != '\0') { switch (formatStr[formatStrIndex]) { case 'd': i = writeInt32( buffer, i, (uint32_t)va_arg(vl, uint32_t)); break; case 'x': case 'X': case 'u': i = writeInt32( buffer, i, (uint32_t)va_arg(vl, uint32_t)); break; case 's': { TraceStringHandle_t xString; xTraceStringRegister((char*)va_arg(vl, char*), &xString); i = writeInt16(buffer, i, (uint16_t)xString); } break; #if (TRC_CFG_INCLUDE_FLOAT_SUPPORT) /* Yes, "double" as type also in the float case. This since "float" is promoted into "double" by the va_arg stuff. */ case 'f': i = writeFloat( buffer, i, (float)va_arg(vl, double)); break; #else /* No support for floats, but attempt to store a float user event avoid a possible crash due to float reference. Instead store the data on uint_32 format (will not be displayed anyway). This is just to keep va_arg and i consistent. */ case 'f': i = writeInt32( buffer, i, (uint32_t)va_arg(vl, double)); break; #endif case 'l': formatStrIndex++; switch (formatStr[formatStrIndex]) { #if (TRC_CFG_INCLUDE_FLOAT_SUPPORT) case 'f': i = writeDouble(buffer, i, (double)va_arg(vl, double)); break; #else /* No support for floats, but attempt to store a float user event avoid a possible crash due to float reference. Instead store the data on uint_32 format (will not be displayed anyway). This is just to keep va_arg and i consistent. */ case 'f': i = writeInt32( buffer, /* In this case, the value will not be shown anyway */ i, (uint32_t)va_arg(vl, double)); i = writeInt32( buffer, /* Do it twice, to write in total 8 bytes */ i, (uint32_t)va_arg(vl, double)); break; #endif default: break; } break; case 'h': formatStrIndex++; switch (formatStr[formatStrIndex]) { case 'd': i = writeInt16( buffer, i, (uint16_t)va_arg(vl, uint32_t)); break; case 'u': i = writeInt16( buffer, i, (uint16_t)va_arg(vl, uint32_t)); break; default: break; } break; case 'b': formatStrIndex++; switch (formatStr[formatStrIndex]) { case 'd': i = writeInt8( buffer, i, (uint8_t)va_arg(vl, uint32_t)); break; case 'u': i = writeInt8( buffer, i, (uint8_t)va_arg(vl, uint32_t)); break; default: break; } break; default: /* False alarm: this wasn't a valid format specifier */ argCounter--; break; } if (argCounter > 15) { prvTraceError("xTracePrintF - Too many arguments, max 15 allowed!"); return 0; } } else break; } formatStrIndex++; if (i == 255) { prvTraceError("xTracePrintF - Too large arguments, max 32 byte allowed!"); return 0; } } return (uint8_t)(i+3)/4; } #endif /******************************************************************************* * prvTraceClearChannelBuffer * * Clears a number of items in the channel buffer, starting from nextSlotToWrite. ******************************************************************************/ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1) && (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 1)) static void prvTraceClearChannelBuffer(uint32_t count) { uint32_t slots; TRACE_ASSERT((TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE) >= count, "prvTraceClearChannelBuffer: TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE is too small to handle this event.", TRC_UNUSED); /* Check if we're close to the end of the buffer */ if (RecorderDataPtr->userEventBuffer.nextSlotToWrite + count > (TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE)) { slots = (TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE) - RecorderDataPtr->userEventBuffer.nextSlotToWrite; /* Number of slots before end of buffer */ (void)memset(&RecorderDataPtr->userEventBuffer.channelBuffer[RecorderDataPtr->userEventBuffer.nextSlotToWrite], 0, slots); (void)memset(&RecorderDataPtr->userEventBuffer.channelBuffer[0], 0, (count - slots)); } else (void)memset(&RecorderDataPtr->userEventBuffer.channelBuffer[RecorderDataPtr->userEventBuffer.nextSlotToWrite], 0, count); } #endif /******************************************************************************* * prvTraceCopyToDataBuffer * * Copies a number of items to the data buffer, starting from nextSlotToWrite. ******************************************************************************/ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1) && (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 1)) static void prvTraceCopyToDataBuffer(uint32_t* data, uint32_t count) { uint32_t slots; TRACE_ASSERT(data != 0, "prvTraceCopyToDataBuffer: data == NULL.", TRC_UNUSED); TRACE_ASSERT(count <= (TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE), "prvTraceCopyToDataBuffer: TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE is too small to handle this event.", TRC_UNUSED); /* Check if we're close to the end of the buffer */ if (RecorderDataPtr->userEventBuffer.nextSlotToWrite + count > (TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE)) { slots = (TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE) - RecorderDataPtr->userEventBuffer.nextSlotToWrite; /* Number of slots before end of buffer */ (void)memcpy(&RecorderDataPtr->userEventBuffer.dataBuffer[RecorderDataPtr->userEventBuffer.nextSlotToWrite * 4], data, slots * 4); (void)memcpy(&RecorderDataPtr->userEventBuffer.dataBuffer[0], data + slots, (count - slots) * 4); } else { (void)memcpy(&RecorderDataPtr->userEventBuffer.dataBuffer[RecorderDataPtr->userEventBuffer.nextSlotToWrite * 4], data, count * 4); } } #endif /******************************************************************************* * prvTraceUBHelper1 * * Calls on prvTraceUserEventFormat() to do the actual formatting, then goes on * to the next helper function. ******************************************************************************/ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1) && (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 1)) static void prvTraceUBHelper1(traceUBChannel channel, TraceStringHandle_t eventLabel, TraceStringHandle_t formatLabel, va_list vl) { uint32_t data[(3 + MAX_ARG_SIZE) / 4]; uint8_t byteOffset = 4; /* Need room for timestamp */ uint8_t noOfSlots; if (channel == 0) { /* We are dealing with an unknown channel format pair */ byteOffset = (uint8_t)(byteOffset + 4); /* Also need room for channel and format */ ((uint16_t*)data)[2] = eventLabel; ((uint16_t*)data)[3] = formatLabel; } noOfSlots = prvTraceUserEventFormat((char*)&(RecorderDataPtr->SymbolTable.symbytes[formatLabel+4]), vl, (uint8_t*)data, byteOffset); prvTraceUBHelper2(channel, data, noOfSlots); } #endif /******************************************************************************* * prvTraceUBHelper2 * * This function simply copies the data buffer to the actual user event buffer. ******************************************************************************/ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1) && (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 1)) static void prvTraceUBHelper2(traceUBChannel channel, uint32_t* data, uint32_t noOfSlots) { static uint32_t old_timestamp = 0; uint32_t old_nextSlotToWrite = 0; TRACE_ALLOC_CRITICAL_SECTION(); TRACE_ASSERT((TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE) >= noOfSlots, "prvTraceUBHelper2: TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE is too small to handle this event.", TRC_UNUSED); trcCRITICAL_SECTION_BEGIN(); /* Store the timestamp */ prvTracePortGetTimeStamp(data); if (*data < old_timestamp) { RecorderDataPtr->userEventBuffer.wraparoundCounter++; } old_timestamp = *data; /* Start by erasing any information in the channel buffer */ prvTraceClearChannelBuffer(noOfSlots); prvTraceCopyToDataBuffer(data, noOfSlots); /* Will wrap around the data if necessary */ old_nextSlotToWrite = RecorderDataPtr->userEventBuffer.nextSlotToWrite; /* Save the index that we want to write the channel data at when we're done */ RecorderDataPtr->userEventBuffer.nextSlotToWrite = (RecorderDataPtr->userEventBuffer.nextSlotToWrite + noOfSlots) % (TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE); /* Make sure we never end up outside the buffer */ /* Write to the channel buffer to indicate that this user event is ready to be used */ if (channel != 0) { RecorderDataPtr->userEventBuffer.channelBuffer[old_nextSlotToWrite] = channel; } else { /* 0xFF indicates that this is not a normal channel id */ RecorderDataPtr->userEventBuffer.channelBuffer[old_nextSlotToWrite] = (traceUBChannel)0xFF; } trcCRITICAL_SECTION_END(); } #endif /******************************************************************************* * xTraceRegisterUBChannel * * Registers a channel for Separated User Events, i.e., those stored in the * separate user event buffer. * * Note: Only available if TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER is enabled in * trcSnapshotConfig.h ******************************************************************************/ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1) && (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 1)) traceUBChannel xTraceRegisterUBChannel(TraceStringHandle_t channel, TraceStringHandle_t formatStr) { uint8_t i; traceUBChannel retVal = 0; TRACE_ALLOC_CRITICAL_SECTION(); TRACE_ASSERT(formatStr != 0, "xTraceRegisterChannelFormat: formatStr == 0", (traceUBChannel)0); trcCRITICAL_SECTION_BEGIN(); for (i = 1; i <= (TRC_CFG_UB_CHANNELS); i++) /* Size of the channels buffer is TRC_CFG_UB_CHANNELS + 1. Index 0 is unused. */ { if(RecorderDataPtr->userEventBuffer.channels[i].name == 0 && RecorderDataPtr->userEventBuffer.channels[i].defaultFormat == 0) { /* Found empty slot */ RecorderDataPtr->userEventBuffer.channels[i].name = channel; RecorderDataPtr->userEventBuffer.channels[i].defaultFormat = formatStr; retVal = (traceUBChannel)i; break; } if (RecorderDataPtr->userEventBuffer.channels[i].name == channel && RecorderDataPtr->userEventBuffer.channels[i].defaultFormat == formatStr) { /* Found a match */ retVal = (traceUBChannel)i; break; } } trcCRITICAL_SECTION_END(); return retVal; } #endif /****************************************************************************** * vTraceUBData * * Slightly faster version of xTracePrintF() due to no lookups. * * Note: This is only available if TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER is * enabled in trcSnapshotConfig.h ******************************************************************************/ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1) && (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 1)) void vTraceUBData(traceUBChannel channelPair, ...) { va_list vl; TRACE_ASSERT(channelPair != 0, "vTraceUBData: Not a valid traceUBChannel!", TRC_UNUSED); va_start(vl, channelPair); vTraceUBData_Helper(channelPair, vl); va_end(vl); } #endif /* Extracts the channel name and format string from the traceUBChannel, then calls prvTraceUBHelper1. */ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1) && (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 1)) void vTraceUBData_Helper(traceUBChannel channelPair, va_list vl) { TraceStringHandle_t channel; TraceStringHandle_t formatStr; TRACE_ASSERT(channelPair != 0, "vTraceUBData_Helper: channelPair == 0", TRC_UNUSED); TRACE_ASSERT(channelPair <= (TRC_CFG_UB_CHANNELS), "vTraceUBData_Helper: ", TRC_UNUSED); channel = RecorderDataPtr->userEventBuffer.channels[channelPair].name; formatStr = RecorderDataPtr->userEventBuffer.channels[channelPair].defaultFormat; prvTraceUBHelper1(channelPair, channel, formatStr, vl); } #endif /****************************************************************************** * vTraceUBEvent * * Slightly faster version of ... due to no lookups. ******************************************************************************/ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1) && (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 1)) void vTraceUBEvent(traceUBChannel channelPair) { uint32_t data[(3 + MAX_ARG_SIZE) / 4]; TRACE_ASSERT(channelPair != 0, "vTraceUBEvent: channelPair == 0", TRC_UNUSED); TRACE_ASSERT(channelPair <= (TRC_CFG_UB_CHANNELS), "vTraceUBEvent: ", TRC_UNUSED); prvTraceUBHelper2(channelPair, data, 1); /* Only need one slot for timestamp */ } #endif /****************************************************************************** * xTracePrintF * * Generates User Event with formatted text and data, similar to a "printf". * It is very fast compared to a normal "printf" since this function only * stores the arguments. The actual formatting is done * on the host PC when the trace is displayed in the viewer tool. * * User Event labels are created using xTraceStringRegister. * Example: * * TraceStringHandle_t adc_uechannel; * xTraceStringRegister("ADC User Events", &adc_uechannel); * ... * xTracePrintF(adc_uechannel, * "ADC channel %d: %lf volts", * ch, (double)adc_reading/(double)scale); * * Calling xTraceStringRegister multiple times will not create duplicate entries, but * it is of course faster to just do it once, and then keep the handle for later * use. If you don't have any data arguments, only a text label/string, it is * better to use xTracePrint - it is faster. * * Format specifiers supported: * %d - 32 bit signed integer * %u - 32 bit unsigned integer * %f - 32 bit float * %s - string (is copied to the recorder symbol table) * %hd - 16 bit signed integer * %hu - 16 bit unsigned integer * %bd - 8 bit signed integer * %bu - 8 bit unsigned integer * %lf - double-precision float (Note! See below...) * * Up to 15 data arguments are allowed, with a total size of maximum 32 byte. * In case this is exceeded, the user event is changed into an error message. * * The data is stored in trace buffer, and is packed to allow storing multiple * smaller data entries in the same 4-byte record, e.g., four 8-bit values. * A string requires two bytes, as the symbol table is limited to 64K. Storing * a double (%lf) uses two records, so this is quite costly. Use float (%f) * unless the higher precision is really necessary. * * Note that the double-precision float (%lf) assumes a 64 bit double * representation. This does not seem to be the case on e.g. PIC24 and PIC32. * Before using a %lf argument on a 16-bit MCU, please verify that * "sizeof(double)" actually gives 8 as expected. If not, use %f instead. ******************************************************************************/ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1)) traceResult xTracePrintF(TraceStringHandle_t eventLabel, const char* formatStr, ...) { va_list vl; va_start(vl, formatStr); xTraceVPrintF(eventLabel, formatStr, vl); va_end(vl); return TRC_SUCCESS; } #endif /****************************************************************************** * xTraceVPrintF * * xTracePrintF variant that accepts a va_list. * See xTracePrintF documentation for further details. * ******************************************************************************/ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1)) traceResult xTraceVPrintF(TraceStringHandle_t eventLabel, const char* formatStr, va_list vl) { #if (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 0) uint32_t noOfSlots; UserEvent* ue1; uint32_t tempDataBuffer[(3 + MAX_ARG_SIZE) / 4]; TRACE_ALLOC_CRITICAL_SECTION(); TRACE_ASSERT(formatStr != 0, "vTraceVPrintF: formatStr == NULL", TRC_FAIL); trcCRITICAL_SECTION_BEGIN(); if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) { /* First, write the "primary" user event entry in the local buffer, but let the event type be "EVENT_BEING_WRITTEN" for now...*/ ue1 = (UserEvent*)(&tempDataBuffer[0]); ue1->type = EVENT_BEING_WRITTEN; /* Update this as the last step */ noOfSlots = prvTraceUserEventFormat(formatStr, vl, (uint8_t*)tempDataBuffer, 4); /* Store the format string, with a reference to the channel symbol */ ue1->payload = prvTraceOpenSymbol(formatStr, eventLabel); ue1->dts = (uint8_t)prvTraceGetDTS(0xFF); /* prvTraceGetDTS might stop the recorder in some cases... */ if (RecorderDataPtr->recorderActive) { /* If the data does not fit in the remaining main buffer, wrap around to 0 if allowed, otherwise stop the recorder and quit). */ if (RecorderDataPtr->nextFreeIndex + noOfSlots > RecorderDataPtr->maxEvents) { #if (TRC_CFG_SNAPSHOT_MODE == TRC_SNAPSHOT_MODE_RING_BUFFER) (void)memset(& RecorderDataPtr->eventData[RecorderDataPtr->nextFreeIndex * 4], 0, (RecorderDataPtr->maxEvents - RecorderDataPtr->nextFreeIndex)*4); RecorderDataPtr->nextFreeIndex = 0; RecorderDataPtr->bufferIsFull = 1; #else /* Stop recorder, since the event data will not fit in the buffer and not circular buffer in this case... */ vTraceStop(); #endif } /* Check if recorder has been stopped (i.e., vTraceStop above) */ if (RecorderDataPtr->recorderActive) { /* Check that the buffer to be overwritten does not contain any user events that would be partially overwritten. If so, they must be "killed" by replacing the user event and following data with NULL events (i.e., using a memset to zero).*/ #if (TRC_CFG_SNAPSHOT_MODE == TRC_SNAPSHOT_MODE_RING_BUFFER) prvCheckDataToBeOverwrittenForMultiEntryEvents((uint8_t)noOfSlots); #endif /* Copy the local buffer to the main buffer */ (void)memcpy(& RecorderDataPtr->eventData[RecorderDataPtr->nextFreeIndex * 4], tempDataBuffer, noOfSlots * 4); /* Update the event type, i.e., number of data entries following the main USER_EVENT entry (Note: important that this is after the memcpy, but within the critical section!)*/ RecorderDataPtr->eventData[RecorderDataPtr->nextFreeIndex * 4] = (uint8_t) ( USER_EVENT + noOfSlots - 1 ); /* Update the main buffer event index (already checked that it fits in the buffer, so no need to check for wrapping)*/ RecorderDataPtr->nextFreeIndex += noOfSlots; RecorderDataPtr->numEvents += noOfSlots; if (RecorderDataPtr->nextFreeIndex >= (TRC_CFG_EVENT_BUFFER_SIZE)) { #if (TRC_CFG_SNAPSHOT_MODE == TRC_SNAPSHOT_MODE_RING_BUFFER) /* We have reached the end, but this is a ring buffer. Start from the beginning again. */ RecorderDataPtr->bufferIsFull = 1; RecorderDataPtr->nextFreeIndex = 0; #else /* We have reached the end so we stop. */ vTraceStop(); #endif } } #if (TRC_CFG_SNAPSHOT_MODE == TRC_SNAPSHOT_MODE_RING_BUFFER) /* Make sure the next entry is cleared correctly */ prvCheckDataToBeOverwrittenForMultiEntryEvents(1); #endif } } trcCRITICAL_SECTION_END(); #elif (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 1) /* Use the separate user event buffer */ TraceStringHandle_t formatLabel; traceUBChannel channel; if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) { xTraceStringRegister(formatStr, &formatLabel); channel = xTraceRegisterUBChannel(eventLabel, formatLabel); prvTraceUBHelper1(channel, eventLabel, formatLabel, vl); } #endif return TRC_SUCCESS; } #endif /****************************************************************************** * xTracePrint * * Basic user event * * Generates a User Event with a text label. The label is created/looked up * in the symbol table using xTraceStringRegister. ******************************************************************************/ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1)) traceResult xTracePrint(TraceStringHandle_t chn, const char* str) { #if (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 0) UserEvent* ue; uint8_t dts1; TRACE_ALLOC_CRITICAL_SECTION(); trcCRITICAL_SECTION_BEGIN(); if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) { dts1 = (uint8_t)prvTraceGetDTS(0xFF); ue = (UserEvent*) prvTraceNextFreeEventBufferSlot(); if (ue != 0) { ue->dts = dts1; ue->type = USER_EVENT; ue->payload = prvTraceOpenSymbol(str, chn); prvTraceUpdateCounters(); } } trcCRITICAL_SECTION_END(); #elif (TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER == 1) traceUBChannel channel; uint32_t noOfSlots = 1; uint32_t tempDataBuffer[(3 + MAX_ARG_SIZE) / 4]; if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) { TraceStringHandle_t trcStr = prvTraceOpenSymbol(str, chn); channel = xTraceRegisterUBChannel(chn, trcStr); if (channel == 0) { /* We are dealing with an unknown channel format pair */ noOfSlots++; /* Also need room for channel and format */ ((uint16_t*)tempDataBuffer)[2] = chn; ((uint16_t*)tempDataBuffer)[3] = trcStr; } prvTraceUBHelper2(channel, tempDataBuffer, noOfSlots); } #endif return TRC_SUCCESS; } #endif /******************************************************************************* * xTraceStringRegister * * Register strings in the recorder, e.g. for names of user event channels. * * Example: * xTraceStringRegister("MyUserEvent", &myStringHandle); * ... * xTracePrintF(myEventHandle, "My value is: %d", myValue); ******************************************************************************/ #if ((TRC_CFG_SCHEDULING_ONLY == 0) && (TRC_CFG_INCLUDE_USER_EVENTS == 1)) traceResult xTraceStringRegister(const char* label, TraceStringHandle_t *pxString) { TRACE_ASSERT(label != 0, "xTraceStringRegister: label == NULL", TRC_FAIL); TRACE_ASSERT(RecorderDataPtr != 0, "Recorder not initialized, call vTraceEnable() first!", TRC_FAIL); *pxString = prvTraceOpenSymbol(label, 0); return TRC_SUCCESS; } /* DEPRECATED */ TraceStringHandle_t xTraceRegisterString(const char* name) { TraceStringHandle_t trcStr = 0; xTraceStringRegister(name, &trcStr); return trcStr; } #endif traceResult xTraceInitialize() { #if defined(TRC_CFG_ENABLE_STACK_MONITOR) && (TRC_CFG_ENABLE_STACK_MONITOR == 1) && (TRC_CFG_SCHEDULING_ONLY == 0) uint32_t i; #endif /* defined(TRC_CFG_ENABLE_STACK_MONITOR) && (TRC_CFG_ENABLE_STACK_MONITOR == 1) && (TRC_CFG_SCHEDULING_ONLY == 0) */ if (RecorderInitialized != 0) { return TRC_SUCCESS; } /* These are set on init so they aren't overwritten by late initialization values. */ CurrentFilterMask = 0xFFFF; CurrentFilterGroup = FilterGroup0; traceErrorMessage = 0; #if defined(TRC_CFG_ENABLE_STACK_MONITOR) && (TRC_CFG_ENABLE_STACK_MONITOR == 1) && (TRC_CFG_SCHEDULING_ONLY == 0) tasksNotIncluded = 0; for (i = 0; i < TRC_CFG_STACK_MONITOR_MAX_TASKS; i++) { tasksInStackMonitor[i].tcb = 0; tasksInStackMonitor[i].uiPreviousLowMark = 0; } #endif /* defined(TRC_CFG_ENABLE_STACK_MONITOR) && (TRC_CFG_ENABLE_STACK_MONITOR == 1) && (TRC_CFG_SCHEDULING_ONLY == 0) */ #if (TRC_CFG_RECORDER_BUFFER_ALLOCATION == TRC_RECORDER_BUFFER_ALLOCATION_STATIC) RecorderDataPtr = &RecorderData; #elif (TRC_CFG_RECORDER_BUFFER_ALLOCATION == TRC_RECORDER_BUFFER_ALLOCATION_DYNAMIC) /* Initialize heap */ TRC_KERNEL_PORT_HEAP_INIT(sizeof(RecorderDataType)); /* Allocate data */ RecorderDataPtr = (RecorderDataType*)TRC_KERNEL_PORT_HEAP_MALLOC(sizeof(RecorderDataType)); if (!RecorderDataPtr) { prvTraceError("Failed allocating recorder buffer!"); return TRC_FAIL; } #elif (TRC_CFG_RECORDER_BUFFER_ALLOCATION == TRC_RECORDER_BUFFER_ALLOCATION_CUSTOM) if (!RecorderDataPtr) { prvTraceError("Recorder data pointer not set! Use vTraceSetRecorderDataBuffer()."); return TRC_FAIL; } #endif init_hwtc_count = TRC_HWTC_COUNT; if (xTraceKernelPortInitialize(&xKernelPortDataBuffer) == TRC_FAIL) { return TRC_FAIL; } (void)memset(RecorderDataPtr, 0, sizeof(RecorderDataType)); RecorderDataPtr->version = TRACE_KERNEL_VERSION; RecorderDataPtr->minor_version = TRACE_MINOR_VERSION; RecorderDataPtr->irq_priority_order = TRC_IRQ_PRIORITY_ORDER; RecorderDataPtr->filesize = sizeof(RecorderDataType); RecorderDataPtr->maxEvents = (TRC_CFG_EVENT_BUFFER_SIZE); RecorderDataPtr->debugMarker0 = (int32_t)0xF0F0F0F0; RecorderDataPtr->isUsing16bitHandles = TRC_CFG_USE_16BIT_OBJECT_HANDLES; RecorderDataPtr->isrTailchainingThreshold = TRC_CFG_ISR_TAILCHAINING_THRESHOLD; /* This function is kernel specific */ xTraceKernelPortInitObjectPropertyTable(); RecorderDataPtr->debugMarker1 = (int32_t)0xF1F1F1F1; RecorderDataPtr->SymbolTable.symTableSize = (TRC_CFG_SYMBOL_TABLE_SIZE); RecorderDataPtr->SymbolTable.nextFreeSymbolIndex = 1; #if (TRC_CFG_INCLUDE_FLOAT_SUPPORT == 1) RecorderDataPtr->exampleFloatEncoding = 1.0f; /* otherwise already zero */ #endif RecorderDataPtr->debugMarker2 = (int32_t)0xF2F2F2F2; prvStrncpy(RecorderDataPtr->systemInfo, "Trace Recorder Demo", 80); RecorderDataPtr->debugMarker3 = (int32_t)0xF3F3F3F3; RecorderDataPtr->endmarker0 = 0x0A; RecorderDataPtr->endmarker1 = 0x0B; RecorderDataPtr->endmarker2 = 0x0C; RecorderDataPtr->endmarker3 = 0x0D; RecorderDataPtr->endmarker4 = 0x71; RecorderDataPtr->endmarker5 = 0x72; RecorderDataPtr->endmarker6 = 0x73; RecorderDataPtr->endmarker7 = 0x74; RecorderDataPtr->endmarker8 = 0xF1; RecorderDataPtr->endmarker9 = 0xF2; RecorderDataPtr->endmarker10 = 0xF3; RecorderDataPtr->endmarker11 = 0xF4; #if TRC_CFG_USE_SEPARATE_USER_EVENT_BUFFER RecorderDataPtr->userEventBuffer.bufferID = 1; RecorderDataPtr->userEventBuffer.version = 0; RecorderDataPtr->userEventBuffer.numberOfSlots = (TRC_CFG_SEPARATE_USER_EVENT_BUFFER_SIZE); RecorderDataPtr->userEventBuffer.numberOfChannels = (TRC_CFG_UB_CHANNELS)+1; #endif /* Kernel specific initialization of the objectHandleStacks variable */ xTraceKernelPortInitObjectHandleStack(); /* Finally, the 12-byte "start markers" are initialized, allowing for Tracealyzer to find the trace data in a larger RAM dump. The start and end markers must be unique, but without proper precautions there might be a risk of accidental duplicates of the start/end markers, e.g., due to compiler optimizations. The below initialization of the start marker is therefore made in reverse order and the fields are volatile to ensure this assignment order. This to avoid any chance of accidental duplicates of this elsewhere in memory. Moreover, the fields are set byte-by-byte to avoid endian issues.*/ RecorderDataPtr->startmarker11 = 0xF4; RecorderDataPtr->startmarker10 = 0xF3; RecorderDataPtr->startmarker9 = 0xF2; RecorderDataPtr->startmarker8 = 0xF1; RecorderDataPtr->startmarker7 = 0x74; RecorderDataPtr->startmarker6 = 0x73; RecorderDataPtr->startmarker5 = 0x72; RecorderDataPtr->startmarker4 = 0x71; RecorderDataPtr->startmarker3 = 0x04; RecorderDataPtr->startmarker2 = 0x03; RecorderDataPtr->startmarker1 = 0x02; RecorderDataPtr->startmarker0 = 0x01; if (traceErrorMessage != 0) { // An error was detected before vTraceEnable was called, make sure this is stored in the trace data. prvStrncpy(RecorderDataPtr->systemInfo, traceErrorMessage, 80); RecorderDataPtr->internalErrorOccured = 1; prvTraceStop(); } #ifdef TRC_PORT_SPECIFIC_INIT TRC_PORT_SPECIFIC_INIT(); #endif RecorderInitialized = 1; return TRC_SUCCESS; } #if ((!defined TRC_CFG_INCLUDE_READY_EVENTS) || (TRC_CFG_INCLUDE_READY_EVENTS == 1)) void prvTraceSetReadyEventsEnabled(uint32_t flag) { readyEventsEnabled = flag; } /******************************************************************************* * prvTraceStoreTaskReady * * This function stores a ready state for the task handle sent in as parameter. ******************************************************************************/ void prvTraceStoreTaskReady(traceHandle handle) { uint16_t dts3; TREvent* tr; uint8_t hnd8; TRACE_ALLOC_CRITICAL_SECTION(); if (handle == 0) { /* On FreeRTOS v7.3.0, this occurs when creating tasks due to a bad placement of the trace macro. In that case, the events are ignored. */ return; } if (! readyEventsEnabled) { /* When creating tasks, ready events are also created. If creating a "hidden" (not traced) task, we must therefore disable recording of ready events to avoid an undesired ready event... */ return; } TRACE_ASSERT(handle <= (TRC_CFG_NTASK), "prvTraceStoreTaskReady: Invalid value for handle", TRC_UNUSED); if (recorder_busy) { /************************************************************************* * This occurs if an ISR calls a trace function, preempting a previous * trace call that is being processed in a different ISR or task. * If this occurs, there is probably a problem in the definition of the * recorder's internal critical sections (TRACE_ENTER_CRITICAL_SECTION and * TRACE_EXIT_CRITICAL_SECTION). They must disable the RTOS tick interrupt * and any other ISRs that calls the trace recorder directly or via * traced kernel functions. The ARM port disables all interrupts using the * PRIMASK register to avoid this issue. *************************************************************************/ prvTraceError("Recorder busy - high priority ISR using syscall? (1)"); return; } trcCRITICAL_SECTION_BEGIN(); if (RecorderDataPtr->recorderActive) /* Need to repeat this check! */ { dts3 = (uint16_t)prvTraceGetDTS(0xFFFF); hnd8 = prvTraceGet8BitHandle(handle); tr = (TREvent*)prvTraceNextFreeEventBufferSlot(); if (tr != 0) { tr->type = DIV_TASK_READY; tr->dts = dts3; tr->objHandle = hnd8; prvTraceUpdateCounters(); } } trcCRITICAL_SECTION_END(); } #endif /******************************************************************************* * prvTraceStoreLowPower * * This function stores a low power state. ******************************************************************************/ void prvTraceStoreLowPower(uint32_t flag) { uint16_t dts; LPEvent* lp; TRACE_ALLOC_CRITICAL_SECTION(); TRACE_ASSERT(flag <= 1, "prvTraceStoreLowPower: Invalid flag value", TRC_UNUSED); if (recorder_busy) { /************************************************************************* * This occurs if an ISR calls a trace function, preempting a previous * trace call that is being processed in a different ISR or task. * If this occurs, there is probably a problem in the definition of the * recorder's internal critical sections (TRACE_ENTER_CRITICAL_SECTION and * TRACE_EXIT_CRITICAL_SECTION). They must disable the RTOS tick interrupt * and any other ISRs that calls the trace recorder directly or via * traced kernel functions. The ARM port disables all interrupts using the * PRIMASK register to avoid this issue. *************************************************************************/ prvTraceError("Recorder busy - high priority ISR using syscall? (1)"); return; } trcCRITICAL_SECTION_BEGIN(); if (RecorderDataPtr->recorderActive) { dts = (uint16_t)prvTraceGetDTS(0xFFFF); lp = (LPEvent*)prvTraceNextFreeEventBufferSlot(); if (lp != 0) { lp->type = (uint8_t) (LOW_POWER_BEGIN + ( uint8_t ) flag); /* BEGIN or END depending on flag */ lp->dts = dts; prvTraceUpdateCounters(); } } trcCRITICAL_SECTION_END(); } /******************************************************************************* * vTraceStoreMemMangEvent * * This function stores malloc and free events. Each call requires two records, * for size and address respectively. The event code parameter (ecode) is applied * to the first record (size) and the following address record gets event * code "ecode + 1", so make sure this is respected in the event code table. * Note: On "free" calls, the signed_size parameter should be negative. ******************************************************************************/ #if (TRC_CFG_INCLUDE_MEMMANG_EVENTS == 1) #if (TRC_CFG_SCHEDULING_ONLY == 0) void vTraceStoreMemMangEvent(uint32_t ecode, uint32_t address, int32_t signed_size) { uint8_t dts1; MemEventSize * ms; MemEventAddr * ma; uint16_t size_low; uint16_t addr_low; uint8_t addr_high; uint32_t size; TRACE_ALLOC_CRITICAL_SECTION(); if (RecorderDataPtr == 0) { /* Occurs in vTraceInitTraceData, if using dynamic allocation. */ return; } if (signed_size < 0) size = (uint32_t)(- signed_size); else size = (uint32_t)(signed_size); trcCRITICAL_SECTION_BEGIN(); /* Only update heapMemUsage if we have a valid address */ if (address != 0) { RecorderDataPtr->heapMemUsage += (uint32_t)signed_size; if (RecorderDataPtr->heapMemUsage > RecorderDataPtr->heapMemMaxUsage) { RecorderDataPtr->heapMemMaxUsage = RecorderDataPtr->heapMemUsage; } } if (RecorderDataPtr->recorderActive) { dts1 = (uint8_t)prvTraceGetDTS(0xFF); size_low = (uint16_t)prvTraceGetParam(0xFFFF, size); ms = (MemEventSize *)prvTraceNextFreeEventBufferSlot(); if (ms != 0) { ms->dts = dts1; ms->type = NULL_EVENT; /* Updated when all events are written */ ms->size = size_low; prvTraceUpdateCounters(); /* Storing a second record with address (signals "failed" if null) */ #if (TRC_CFG_HEAP_SIZE_BELOW_16M) /* If the heap address range is within 16 MB, i.e., the upper 8 bits of addresses are constant, this optimization avoids storing an extra event record by ignoring the upper 8 bit of the address */ addr_low = address & 0xFFFF; addr_high = (address >> 16) & 0xFF; #else /* The whole 32 bit address is stored using a second event record for the upper 16 bit */ addr_low = (uint16_t)prvTraceGetParam(0xFFFF, address); addr_high = 0; #endif ma = (MemEventAddr *) prvTraceNextFreeEventBufferSlot(); if (ma != 0) { ma->addr_low = addr_low; ma->addr_high = addr_high; ma->type = (uint8_t) (ecode + 1); /* Note this! */ ms->type = (uint8_t) ecode; /* Set type of first event */ prvTraceUpdateCounters(); } } } trcCRITICAL_SECTION_END(); } #endif /* TRC_CFG_SCHEDULING_ONLY */ #endif /******************************************************************************* * prvTraceStoreKernelCall * * This is the main integration point for storing kernel calls, and * is called by the hooks in trcKernelHooks.h (see trcKernelPort.h for event codes). ******************************************************************************/ #if (TRC_CFG_SCHEDULING_ONLY == 0) void prvTraceStoreKernelCall(uint32_t ecode, traceObjectClass objectClass, uint32_t objectNumber) { KernelCall * kse; uint16_t dts1; uint8_t hnd8; TRACE_ALLOC_CRITICAL_SECTION(); /* Avoids warnings when asserts are disabled */ (void)objectClass; TRACE_ASSERT(ecode < 0xFF, "prvTraceStoreKernelCall: ecode >= 0xFF", TRC_UNUSED); TRACE_ASSERT(objectClass < TRACE_NCLASSES, "prvTraceStoreKernelCall: objectClass >= TRACE_NCLASSES", TRC_UNUSED); TRACE_ASSERT(objectNumber <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectClass], "prvTraceStoreKernelCall: Invalid value for objectNumber", TRC_UNUSED); if (recorder_busy) { /************************************************************************* * This occurs if an ISR calls a trace function, preempting a previous * trace call that is being processed in a different ISR or task. * If this occurs, there is probably a problem in the definition of the * recorder's internal critical sections (TRACE_ENTER_CRITICAL_SECTION and * TRACE_EXIT_CRITICAL_SECTION). They must disable the RTOS tick interrupt * and any other ISRs that calls the trace recorder directly or via * traced kernel functions. The ARM port disables all interrupts using the * PRIMASK register to avoid this issue. *************************************************************************/ prvTraceError("Recorder busy - high priority ISR using syscall? (2)"); return; } if (handle_of_last_logged_task == 0) { return; } trcCRITICAL_SECTION_BEGIN(); if (RecorderDataPtr->recorderActive) { dts1 = (uint16_t)prvTraceGetDTS(0xFFFF); hnd8 = prvTraceGet8BitHandle((traceHandle)objectNumber); kse = (KernelCall*) prvTraceNextFreeEventBufferSlot(); if (kse != 0) { kse->dts = dts1; kse->type = (uint8_t)ecode; kse->objHandle = hnd8; prvTraceUpdateCounters(); } } trcCRITICAL_SECTION_END(); } #endif /* TRC_CFG_SCHEDULING_ONLY */ /******************************************************************************* * prvTraceStoreKernelCallWithParam * * Used for storing kernel calls with a handle and a numeric parameter. If the * numeric parameter does not fit in one byte, and extra XPS event is inserted * before the kernel call event containing the three upper bytes. ******************************************************************************/ #if (TRC_CFG_SCHEDULING_ONLY == 0) void prvTraceStoreKernelCallWithParam(uint32_t evtcode, traceObjectClass objectClass, uint32_t objectNumber, uint32_t param) { KernelCallWithParamAndHandle * kse; uint8_t dts2; uint8_t hnd8; uint8_t p8; TRACE_ALLOC_CRITICAL_SECTION(); /* Avoids warnings when asserts are disabled */ (void)objectClass; TRACE_ASSERT(evtcode < 0xFF, "prvTraceStoreKernelCallWithParam: evtcode >= 0xFF", TRC_UNUSED); TRACE_ASSERT(objectClass < TRACE_NCLASSES, "prvTraceStoreKernelCallWithParam: objectClass >= TRACE_NCLASSES", TRC_UNUSED); TRACE_ASSERT(objectNumber <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectClass], "prvTraceStoreKernelCallWithParam: Invalid value for objectNumber", TRC_UNUSED); if (recorder_busy) { /************************************************************************* * This occurs if an ISR calls a trace function, preempting a previous * trace call that is being processed in a different ISR or task. * If this occurs, there is probably a problem in the definition of the * recorder's internal critical sections (TRACE_ENTER_CRITICAL_SECTION and * TRACE_EXIT_CRITICAL_SECTION). They must disable the RTOS tick interrupt * and any other ISRs that calls the trace recorder directly or via * traced kernel functions. The ARM port disables all interrupts using the * PRIMASK register to avoid this issue. *************************************************************************/ prvTraceError("Recorder busy - high priority ISR using syscall? (3)"); return; } trcCRITICAL_SECTION_BEGIN(); if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) { dts2 = (uint8_t)prvTraceGetDTS(0xFF); p8 = (uint8_t) prvTraceGetParam(0xFF, param); hnd8 = prvTraceGet8BitHandle((traceHandle)objectNumber); kse = (KernelCallWithParamAndHandle*) prvTraceNextFreeEventBufferSlot(); if (kse != 0) { kse->dts = dts2; kse->type = (uint8_t)evtcode; kse->objHandle = hnd8; kse->param = p8; prvTraceUpdateCounters(); } } trcCRITICAL_SECTION_END(); } #endif /* TRC_CFG_SCHEDULING_ONLY */ /******************************************************************************* * prvTraceGetParam * * Used for storing extra bytes for kernel calls with numeric parameters. * * May only be called within a critical section! ******************************************************************************/ #if (TRC_CFG_SCHEDULING_ONLY == 0) static uint32_t prvTraceGetParam(uint32_t param_max, uint32_t param) { XPSEvent* xps; TRACE_ASSERT(param_max == 0xFF || param_max == 0xFFFF, "prvTraceGetParam: Invalid value for param_max", param); if (param <= param_max) { return param; } else { xps = (XPSEvent*) prvTraceNextFreeEventBufferSlot(); if (xps != 0) { xps->type = DIV_XPS; xps->xps_8 = (uint8_t)((param & (0xFF00 & ~param_max)) >> 8); xps->xps_16 = (uint16_t)((param & (0xFFFF0000 & ~param_max)) >> 16); prvTraceUpdateCounters(); } return param & param_max; } } #endif /******************************************************************************* * prvTraceStoreKernelCallWithNumericParamOnly * * Used for storing kernel calls with numeric parameters only. This is * only used for traceTASK_DELAY and traceDELAY_UNTIL at the moment. ******************************************************************************/ #if (TRC_CFG_SCHEDULING_ONLY == 0) void prvTraceStoreKernelCallWithNumericParamOnly(uint32_t evtcode, uint32_t param) { KernelCallWithParam16 * kse; uint8_t dts6; uint16_t restParam; TRACE_ALLOC_CRITICAL_SECTION(); restParam = 0; TRACE_ASSERT(evtcode < 0xFF, "prvTraceStoreKernelCallWithNumericParamOnly: Invalid value for evtcode", TRC_UNUSED); if (recorder_busy) { /************************************************************************* * This occurs if an ISR calls a trace function, preempting a previous * trace call that is being processed in a different ISR or task. * If this occurs, there is probably a problem in the definition of the * recorder's internal critical sections (TRACE_ENTER_CRITICAL_SECTION and * TRACE_EXIT_CRITICAL_SECTION). They must disable the RTOS tick interrupt * and any other ISRs that calls the trace recorder directly or via * traced kernel functions. The ARM port disables all interrupts using the * PRIMASK register to avoid this issue. *************************************************************************/ prvTraceError("Recorder busy - high priority ISR using syscall? (4)"); return; } trcCRITICAL_SECTION_BEGIN(); if (RecorderDataPtr->recorderActive && handle_of_last_logged_task) { dts6 = (uint8_t)prvTraceGetDTS(0xFF); restParam = (uint16_t)prvTraceGetParam(0xFFFF, param); kse = (KernelCallWithParam16*) prvTraceNextFreeEventBufferSlot(); if (kse != 0) { kse->dts = dts6; kse->type = (uint8_t)evtcode; kse->param = restParam; prvTraceUpdateCounters(); } } trcCRITICAL_SECTION_END(); } #endif /* TRC_CFG_SCHEDULING_ONLY */ /******************************************************************************* * prvTraceStoreTaskswitch * Called by the scheduler from the SWITCHED_OUT hook, and by uiTraceStart. * At this point interrupts are assumed to be disabled! ******************************************************************************/ void prvTraceStoreTaskswitch(traceHandle task_handle) { uint16_t dts3; TSEvent* ts; uint8_t hnd8; #if (TRC_CFG_INCLUDE_ISR_TRACING == 1) extern int32_t isPendingContextSwitch; #endif trcSR_ALLOC_CRITICAL_SECTION_ON_CORTEX_M_ONLY(); TRACE_ASSERT(task_handle <= (TRC_CFG_NTASK), "prvTraceStoreTaskswitch: Invalid value for task_handle", TRC_UNUSED); trcCRITICAL_SECTION_BEGIN_ON_CORTEX_M_ONLY(); if ((task_handle != handle_of_last_logged_task) && (RecorderDataPtr->recorderActive)) { #if (TRC_CFG_INCLUDE_ISR_TRACING == 1) isPendingContextSwitch = 0; #endif dts3 = (uint16_t)prvTraceGetDTS(0xFFFF); handle_of_last_logged_task = task_handle; hnd8 = prvTraceGet8BitHandle(handle_of_last_logged_task); ts = (TSEvent*)prvTraceNextFreeEventBufferSlot(); if (ts != 0) { if (prvTraceGetObjectState(TRACE_CLASS_TASK, handle_of_last_logged_task) == TASK_STATE_INSTANCE_ACTIVE) { ts->type = TS_TASK_RESUME; } else { ts->type = TS_TASK_BEGIN; } ts->dts = dts3; ts->objHandle = hnd8; prvTraceSetObjectState(TRACE_CLASS_TASK, handle_of_last_logged_task, TASK_STATE_INSTANCE_ACTIVE); prvTraceUpdateCounters(); } } trcCRITICAL_SECTION_END_ON_CORTEX_M_ONLY(); } /******************************************************************************* * prvTraceStoreObjectNameOnCloseEvent * * Updates the symbol table with the name of this object from the dynamic * objects table and stores a "close" event, holding the mapping between handle * and name (a symbol table handle). The stored name-handle mapping is thus the * "old" one, valid up until this point. ******************************************************************************/ void prvTraceStoreObjectNameOnCloseEvent(uint8_t evtcode, traceHandle handle, traceObjectClass objectclass) { ObjCloseNameEvent * ce; const char * name; TraceStringHandle_t idx; TRACE_ASSERT(objectclass < TRACE_NCLASSES, "prvTraceStoreObjectNameOnCloseEvent: objectclass >= TRACE_NCLASSES", TRC_UNUSED); TRACE_ASSERT(handle <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectclass], "prvTraceStoreObjectNameOnCloseEvent: Invalid value for handle", TRC_UNUSED); if (RecorderDataPtr->recorderActive) { uint8_t hnd8 = prvTraceGet8BitHandle(handle); name = TRACE_PROPERTY_NAME_GET(objectclass, handle); idx = prvTraceOpenSymbol(name, 0); // Interrupt disable not necessary, already done in trcHooks.h macro ce = (ObjCloseNameEvent*) prvTraceNextFreeEventBufferSlot(); if (ce != 0) { ce->type = (uint8_t) evtcode; ce->objHandle = hnd8; ce->symbolIndex = idx; prvTraceUpdateCounters(); } } } void prvTraceStoreObjectPropertiesOnCloseEvent(uint8_t evtcode, traceHandle handle, traceObjectClass objectclass) { ObjClosePropEvent * pe; TRACE_ASSERT(objectclass < TRACE_NCLASSES, "prvTraceStoreObjectPropertiesOnCloseEvent: objectclass >= TRACE_NCLASSES", TRC_UNUSED); TRACE_ASSERT(handle <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectclass], "prvTraceStoreObjectPropertiesOnCloseEvent: Invalid value for handle", TRC_UNUSED); if (RecorderDataPtr->recorderActive) { // Interrupt disable not necessary, already done in trcHooks.h macro pe = (ObjClosePropEvent*) prvTraceNextFreeEventBufferSlot(); if (pe != 0) { if (objectclass == TRACE_CLASS_TASK) { pe->arg1 = TRACE_PROPERTY_ACTOR_PRIORITY(objectclass, handle); } else { pe->arg1 = TRACE_PROPERTY_OBJECT_STATE(objectclass, handle); } pe->type = evtcode; prvTraceUpdateCounters(); } } } void prvTraceSetPriorityProperty(uint8_t objectclass, traceHandle id, uint8_t value) { TRACE_ASSERT(objectclass < TRACE_NCLASSES, "prvTraceSetPriorityProperty: objectclass >= TRACE_NCLASSES", TRC_UNUSED); TRACE_ASSERT(id <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectclass], "prvTraceSetPriorityProperty: Invalid value for id", TRC_UNUSED); TRACE_PROPERTY_ACTOR_PRIORITY(objectclass, id) = value; } uint8_t prvTraceGetPriorityProperty(uint8_t objectclass, traceHandle id) { TRACE_ASSERT(objectclass < TRACE_NCLASSES, "prvTraceGetPriorityProperty: objectclass >= TRACE_NCLASSES", 0); TRACE_ASSERT(id <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectclass], "prvTraceGetPriorityProperty: Invalid value for id", 0); return TRACE_PROPERTY_ACTOR_PRIORITY(objectclass, id); } void prvTraceSetObjectState(uint8_t objectclass, traceHandle id, uint8_t value) { TRACE_ASSERT(objectclass < TRACE_NCLASSES, "prvTraceSetObjectState: objectclass >= TRACE_NCLASSES", TRC_UNUSED); TRACE_ASSERT(id <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectclass], "prvTraceSetObjectState: Invalid value for id", TRC_UNUSED); TRACE_PROPERTY_OBJECT_STATE(objectclass, id) = value; } uint8_t prvTraceGetObjectState(uint8_t objectclass, traceHandle id) { TRACE_ASSERT(objectclass < TRACE_NCLASSES, "prvTraceGetObjectState: objectclass >= TRACE_NCLASSES", 0); TRACE_ASSERT(id <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectclass], "prvTraceGetObjectState: Invalid value for id", 0); return TRACE_PROPERTY_OBJECT_STATE(objectclass, id); } void prvTraceSetTaskInstanceFinished(traceHandle handle) { /* Avoids warnings when asserts are disabled */ (void)handle; TRACE_ASSERT(handle <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[TRACE_CLASS_TASK], "prvTraceSetTaskInstanceFinished: Invalid value for handle", TRC_UNUSED); #if (TRC_CFG_USE_IMPLICIT_IFE_RULES == 1) TRACE_PROPERTY_OBJECT_STATE(TRACE_CLASS_TASK, handle) = 0; #endif } void* prvTraceNextFreeEventBufferSlot(void) { if (! RecorderDataPtr->recorderActive) { /* If an XTS or XPS event prior to the main event has filled the buffer before saving the main event, and store mode is "stop when full". */ return 0; } if (RecorderDataPtr->nextFreeIndex >= (TRC_CFG_EVENT_BUFFER_SIZE)) { prvTraceError("Attempt to index outside event buffer!"); return 0; } return (void*)(&RecorderDataPtr->eventData[RecorderDataPtr->nextFreeIndex*4]); } uint16_t uiIndexOfObject(traceHandle objecthandle, uint8_t objectclass) { uint16_t index; TRACE_ASSERT(objectclass < TRACE_NCLASSES, "uiIndexOfObject: Invalid value for objectclass", 0); TRACE_ASSERT(objecthandle > 0 && objecthandle <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectclass], "uiIndexOfObject: Invalid value for objecthandle", 0); if ((objectclass < TRACE_NCLASSES) && (objecthandle > 0) && (objecthandle <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectclass])) { index = (uint16_t)(RecorderDataPtr->ObjectPropertyTable.StartIndexOfClass[objectclass] + (RecorderDataPtr->ObjectPropertyTable.TotalPropertyBytesPerClass[objectclass] * (objecthandle - 1))); return index; } prvTraceError("Object table lookup with invalid object handle or object class!"); return 0; } traceHandle prvTraceGetObjectHandle(traceObjectClass objectclass) { traceHandle handle; static int indexOfHandle; TRACE_ALLOC_CRITICAL_SECTION(); TRACE_ASSERT(RecorderDataPtr != 0, "Recorder not initialized, call vTraceEnable() first!", (traceHandle)0); TRACE_ASSERT(objectclass < TRACE_NCLASSES, "prvTraceGetObjectHandle: Invalid value for objectclass", (traceHandle)0); trcCRITICAL_SECTION_BEGIN(); indexOfHandle = objectHandleStacks.indexOfNextAvailableHandle[objectclass]; if (objectHandleStacks.objectHandles[indexOfHandle] == 0) { /* Zero is used to indicate a never before used handle, i.e., new slots in the handle stack. The handle slot needs to be initialized here (starts at 1). */ objectHandleStacks.objectHandles[indexOfHandle] = (traceHandle)(1 + indexOfHandle - objectHandleStacks.lowestIndexOfClass[objectclass]); } handle = objectHandleStacks.objectHandles[indexOfHandle]; if (objectHandleStacks.indexOfNextAvailableHandle[objectclass] > objectHandleStacks.highestIndexOfClass[objectclass]) { prvTraceError(pszTraceGetErrorNotEnoughHandles(objectclass)); handle = 0; } else { int hndCount; objectHandleStacks.indexOfNextAvailableHandle[objectclass]++; hndCount = objectHandleStacks.indexOfNextAvailableHandle[objectclass] - objectHandleStacks.lowestIndexOfClass[objectclass]; if (hndCount > objectHandleStacks.handleCountWaterMarksOfClass[objectclass]) { objectHandleStacks.handleCountWaterMarksOfClass[objectclass] = (traceHandle)hndCount; } } trcCRITICAL_SECTION_END(); return handle; } void prvTraceFreeObjectHandle(traceObjectClass objectclass, traceHandle handle) { int indexOfHandle; TRACE_ASSERT(RecorderDataPtr != 0, "Recorder not initialized, call vTraceEnable() first!", TRC_UNUSED); TRACE_ASSERT(objectclass < TRACE_NCLASSES, "prvTraceFreeObjectHandle: Invalid value for objectclass", TRC_UNUSED); TRACE_ASSERT(handle > 0 && handle <= RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectclass], "prvTraceFreeObjectHandle: Invalid value for handle", TRC_UNUSED); /* Check that there is room to push the handle on the stack */ if ((objectHandleStacks.indexOfNextAvailableHandle[objectclass] - 1) < objectHandleStacks.lowestIndexOfClass[objectclass]) { /* Error */ prvTraceError("Attempt to free more handles than allocated!"); } else { objectHandleStacks.indexOfNextAvailableHandle[objectclass]--; indexOfHandle = objectHandleStacks.indexOfNextAvailableHandle[objectclass]; objectHandleStacks.objectHandles[indexOfHandle] = handle; } } /******************************************************************************* * prvMarkObjectAsUsed * * Sets an "is used flag" on object creation, using the first byte of the name * field. This allows for counting the number of used Object Table slots, even * if no names have been set. ******************************************************************************/ void prvMarkObjectAsUsed(traceObjectClass objectclass, traceHandle handle) { uint16_t idx = uiIndexOfObject(handle, objectclass); RecorderDataPtr->ObjectPropertyTable.objbytes[idx] = 1; } /******************************************************************************* * prvStrncpy * * Private string copy function, to improve portability between compilers. ******************************************************************************/ static void prvStrncpy(char* dst, const char* src, uint32_t maxLength) { uint32_t i; for (i = 0; i < maxLength; i++) { dst[i] = src[i]; if (src[i] == 0) break; } } /******************************************************************************* * prvTraceSetObjectName * * Registers the names of queues, semaphores and other kernel objects in the * recorder's Object Property Table, at the given handle and object class. ******************************************************************************/ void prvTraceSetObjectName(traceObjectClass objectclass, traceHandle handle, const char* name) { static uint16_t idx; if (name == 0) { name = ""; } if (objectclass >= TRACE_NCLASSES) { prvTraceError("Illegal object class in prvTraceSetObjectName"); return; } if (handle == 0) { prvTraceError("Illegal handle (0) in prvTraceSetObjectName."); return; } if (handle > RecorderDataPtr->ObjectPropertyTable.NumberOfObjectsPerClass[objectclass]) { /* ERROR */ prvTraceError(pszTraceGetErrorNotEnoughHandles(objectclass)); } else { idx = uiIndexOfObject(handle, objectclass); if (traceErrorMessage == 0) { prvStrncpy((char*)&(RecorderDataPtr->ObjectPropertyTable.objbytes[idx]), name, RecorderDataPtr->ObjectPropertyTable.NameLengthPerClass[ objectclass ]); } } } TraceStringHandle_t prvTraceOpenSymbol(const char* name, TraceStringHandle_t userEventChannel) { uint16_t result; uint8_t len; uint8_t crc; TRACE_ALLOC_CRITICAL_SECTION(); len = 0; crc = 0; TRACE_ASSERT(name != 0, "prvTraceOpenSymbol: name == NULL", (TraceStringHandle_t)0); prvTraceGetChecksum(name, &crc, &len); trcCRITICAL_SECTION_BEGIN(); result = prvTraceLookupSymbolTableEntry(name, crc, len, userEventChannel); if (!result) { result = prvTraceCreateSymbolTableEntry(name, crc, len, userEventChannel); } trcCRITICAL_SECTION_END(); return result; } /****************************************************************************** * vTraceSetFrequency * * Registers the clock rate of the time source for the event timestamping. * This is normally not required, but if the default value (TRC_HWTC_FREQ_HZ) * should be incorrect for your setup, you can override it using this function. * * Must be called prior to vTraceEnable, and the time source is assumed to * have a fixed clock frequency after the startup. * * Note that, in snapshot mode, the value is divided by the TRC_HWTC_DIVISOR. * This is a software "prescaler" that is also applied on the timestamps. *****************************************************************************/ void vTraceSetFrequency(uint32_t frequency) { timestampFrequency = frequency; } /******************************************************************************* * Supporting functions ******************************************************************************/ /******************************************************************************* * prvTraceError * * Called by various parts in the recorder. Stops the recorder and stores a * pointer to an error message, which is printed by the monitor task. * If you are not using the monitor task, you may use xTraceErrorGetLast() * from your application to check if the recorder is OK. * * Note: If a recorder error is registered before vTraceStart is called, the * trace start will be aborted. This can occur if any of the Nxxxx constants * (e.g., TRC_CFG_NTASK) in trcConfig.h is too small. ******************************************************************************/ void prvTraceError(const char* msg) { /* Stop the recorder */ if (RecorderDataPtr != 0) { xTraceDisable(); } /* If first error only... */ if (traceErrorMessage == 0) { traceErrorMessage = (char*)(intptr_t) msg; if (RecorderDataPtr != 0) { prvStrncpy(RecorderDataPtr->systemInfo, traceErrorMessage, 80); RecorderDataPtr->internalErrorOccured = 1; } } } void vTraceSetFilterMask(uint16_t filterMask) { CurrentFilterMask = filterMask; } void vTraceSetFilterGroup(uint16_t filterGroup) { CurrentFilterGroup = filterGroup; } /****************************************************************************** * prvCheckDataToBeOverwrittenForMultiEntryEvents * * This checks if the next event to be overwritten is a multi-entry user event, * i.e., a USER_EVENT followed by data entries. * Such data entries do not have an event code at byte 0, as other events. * All 4 bytes are user data, so the first byte of such data events must * not be interpreted as type field. The number of data entries following * a USER_EVENT is given in the event code of the USER_EVENT. * Therefore, when overwriting a USER_EVENT (when using in ring-buffer mode) * any data entries following must be replaced with NULL events (code 0). * * This is assumed to execute within a critical section... *****************************************************************************/ #if (TRC_CFG_SNAPSHOT_MODE == TRC_SNAPSHOT_MODE_RING_BUFFER) void prvCheckDataToBeOverwrittenForMultiEntryEvents(uint8_t nofEntriesToCheck) { /* Generic "int" type is desired - should be 16 bit variable on 16 bit HW */ unsigned int i = 0; unsigned int e = 0; TRACE_ASSERT(nofEntriesToCheck != 0, "prvCheckDataToBeOverwrittenForMultiEntryEvents: nofEntriesToCheck == 0", TRC_UNUSED); while (i < nofEntriesToCheck) { e = RecorderDataPtr->nextFreeIndex + i; if ((RecorderDataPtr->eventData[e*4] > USER_EVENT) && (RecorderDataPtr->eventData[e*4] < USER_EVENT + 16)) { uint8_t nDataEvents = (uint8_t)(RecorderDataPtr->eventData[e*4] - USER_EVENT); if ((e + nDataEvents) < RecorderDataPtr->maxEvents) { (void)memset(& RecorderDataPtr->eventData[e*4], 0, (size_t) (4 + 4 * nDataEvents)); } } else if (RecorderDataPtr->eventData[e*4] == DIV_XPS) { if ((e + 1) < RecorderDataPtr->maxEvents) { /* Clear 8 bytes */ (void)memset(& RecorderDataPtr->eventData[e*4], 0, 4 + 4); } else { /* Clear 8 bytes, 4 first and 4 last */ (void)memset(& RecorderDataPtr->eventData[0], 0, 4); (void)memset(& RecorderDataPtr->eventData[e*4], 0, 4); } } i++; } } #endif /******************************************************************************* * prvTraceUpdateCounters * * Updates the index of the event buffer. ******************************************************************************/ void prvTraceUpdateCounters(void) { if (RecorderDataPtr->recorderActive == 0) { return; } RecorderDataPtr->numEvents++; RecorderDataPtr->nextFreeIndex++; if (RecorderDataPtr->nextFreeIndex >= (TRC_CFG_EVENT_BUFFER_SIZE)) { #if (TRC_CFG_SNAPSHOT_MODE == TRC_SNAPSHOT_MODE_RING_BUFFER) RecorderDataPtr->bufferIsFull = 1; RecorderDataPtr->nextFreeIndex = 0; #else vTraceStop(); #endif } #if (TRC_CFG_SNAPSHOT_MODE == TRC_SNAPSHOT_MODE_RING_BUFFER) prvCheckDataToBeOverwrittenForMultiEntryEvents(1); #endif } /****************************************************************************** * prvTraceGetDTS * * Returns a differential timestamp (DTS), i.e., the time since * last event, and creates an XTS event if the DTS does not fit in the * number of bits given. The XTS event holds the MSB bytes of the DTS. * * The parameter param_maxDTS should be 0xFF for 8-bit dts or 0xFFFF for * events with 16-bit dts fields. *****************************************************************************/ uint16_t prvTraceGetDTS(uint16_t param_maxDTS) { static uint32_t old_timestamp = 0; XTSEvent* xts = 0; uint32_t dts = 0; uint32_t timestamp = 0; TRACE_ASSERT(param_maxDTS == 0xFF || param_maxDTS == 0xFFFF, "prvTraceGetDTS: Invalid value for param_maxDTS", 0); if (RecorderDataPtr->frequency == 0) { if (timestampFrequency != 0) { /* If to override default TRC_HWTC_FREQ_HZ value with value set by vTraceSetFrequency */ RecorderDataPtr->frequency = timestampFrequency / (TRC_HWTC_DIVISOR); } else if (init_hwtc_count != (TRC_HWTC_COUNT)) { /* If using default value and timer has been started. Note: If the default frequency value set here would be incorrect, e.g., if the timer has actually not been configured yet, override this with vTraceSetFrequency. */ RecorderDataPtr->frequency = (TRC_HWTC_FREQ_HZ) / (TRC_HWTC_DIVISOR); } /* If no override (vTraceSetFrequency) and timer inactive -> no action */ } /************************************************************************** * The below statements read the timestamp from the timer port module. * If necessary, whole seconds are extracted using division while the rest * comes from the modulo operation. **************************************************************************/ prvTracePortGetTimeStamp(×tamp); /*************************************************************************** * Since dts is unsigned the result will be correct even if timestamp has * wrapped around. ***************************************************************************/ dts = timestamp - old_timestamp; old_timestamp = timestamp; if (RecorderDataPtr->frequency > 0) { /* Check if dts > 1 second */ if (dts > RecorderDataPtr->frequency) { /* More than 1 second has passed */ RecorderDataPtr->absTimeLastEventSecond += dts / RecorderDataPtr->frequency; /* The part that is not an entire second is added to absTimeLastEvent */ RecorderDataPtr->absTimeLastEvent += dts % RecorderDataPtr->frequency; } else { RecorderDataPtr->absTimeLastEvent += dts; } /* Check if absTimeLastEvent >= 1 second */ if (RecorderDataPtr->absTimeLastEvent >= RecorderDataPtr->frequency) { /* RecorderDataPtr->absTimeLastEvent is more than or equal to 1 second, but always less than 2 seconds */ RecorderDataPtr->absTimeLastEventSecond++; RecorderDataPtr->absTimeLastEvent -= RecorderDataPtr->frequency; /* RecorderDataPtr->absTimeLastEvent is now less than 1 second */ } } else { /* Special case if the recorder has not yet started (frequency may be uninitialized, i.e., zero) */ RecorderDataPtr->absTimeLastEvent = timestamp; } /* If the dts (time since last event) does not fit in event->dts (only 8 or 16 bits) */ if (dts > param_maxDTS) { /* Create an XTS event (eXtended TimeStamp) containing the higher dts bits*/ xts = (XTSEvent*) prvTraceNextFreeEventBufferSlot(); if (xts != 0) { if (param_maxDTS == 0xFFFF) { xts->type = XTS16; xts->xts_16 = (uint16_t)((dts / 0x10000) & 0xFFFF); xts->xts_8 = 0; } else if (param_maxDTS == 0xFF) { xts->type = XTS8; xts->xts_16 = (uint16_t)((dts / 0x100) & 0xFFFF); xts->xts_8 = (uint8_t)((dts / 0x1000000) & 0xFF); } else { prvTraceError("Bad param_maxDTS in prvTraceGetDTS"); } prvTraceUpdateCounters(); } } return (uint16_t)dts & param_maxDTS; } /******************************************************************************* * prvTraceLookupSymbolTableEntry * * Find an entry in the symbol table, return 0 if not present. * * The strings are stored in a byte pool, with four bytes of "meta-data" for * every string. * byte 0-1: index of next entry with same checksum (for fast lookup). * byte 2-3: reference to a symbol table entry, a label for xTracePrintF * format strings only (the handle of the destination channel). * byte 4..(4 + length): the string (object name or user event label), with * zero-termination ******************************************************************************/ TraceStringHandle_t prvTraceLookupSymbolTableEntry(const char* name, uint8_t crc6, uint8_t len, TraceStringHandle_t chn) { uint16_t i = RecorderDataPtr->SymbolTable.latestEntryOfChecksum[ crc6 ]; TRACE_ASSERT(name != 0, "prvTraceLookupSymbolTableEntry: name == NULL", (TraceStringHandle_t)0); TRACE_ASSERT(len != 0, "prvTraceLookupSymbolTableEntry: len == 0", (TraceStringHandle_t)0); while (i != 0) { if (RecorderDataPtr->SymbolTable.symbytes[i + 2] == (chn & 0x00FF)) { if (RecorderDataPtr->SymbolTable.symbytes[i + 3] == (chn / 0x100)) { if (RecorderDataPtr->SymbolTable.symbytes[i + 4 + len] == '\0') { if (strncmp((char*)(& RecorderDataPtr->SymbolTable.symbytes[i + 4]), name, len) == 0) { break; /* found */ } } } } i = (uint16_t)(RecorderDataPtr->SymbolTable.symbytes[i] + (RecorderDataPtr->SymbolTable.symbytes[i + 1] * 0x100)); } return i; } /******************************************************************************* * prvTraceCreateSymbolTableEntry * * Creates an entry in the symbol table, independent if it exists already. * * The strings are stored in a byte pool, with four bytes of "meta-data" for * every string. * byte 0-1: index of next entry with same checksum (for fast lookup). * byte 2-3: reference to a symbol table entry, a label for xTracePrintF * format strings only (the handle of the destination channel). * byte 4..(4 + length): the string (object name or user event label), with * zero-termination ******************************************************************************/ TraceStringHandle_t prvTraceCreateSymbolTableEntry(const char* name, uint8_t crc6, uint8_t len, TraceStringHandle_t channel) { TraceStringHandle_t ret = 0; TRACE_ASSERT(name != 0, "prvTraceCreateSymbolTableEntry: name == NULL", 0); TRACE_ASSERT(len != 0, "prvTraceCreateSymbolTableEntry: len == 0", 0); if (RecorderDataPtr->SymbolTable.nextFreeSymbolIndex + len + 4 >= (TRC_CFG_SYMBOL_TABLE_SIZE)) { prvTraceError("Symbol table full. Increase TRC_CFG_SYMBOL_TABLE_SIZE in trcConfig.h"); ret = 0; } else { RecorderDataPtr->SymbolTable.symbytes [ RecorderDataPtr->SymbolTable.nextFreeSymbolIndex] = (uint8_t)(RecorderDataPtr->SymbolTable.latestEntryOfChecksum[ crc6 ] & 0x00FF); RecorderDataPtr->SymbolTable.symbytes [ RecorderDataPtr->SymbolTable.nextFreeSymbolIndex + 1] = (uint8_t)(RecorderDataPtr->SymbolTable.latestEntryOfChecksum[ crc6 ] / 0x100); RecorderDataPtr->SymbolTable.symbytes [ RecorderDataPtr->SymbolTable.nextFreeSymbolIndex + 2] = (uint8_t)(channel & 0x00FF); RecorderDataPtr->SymbolTable.symbytes [ RecorderDataPtr->SymbolTable.nextFreeSymbolIndex + 3] = (uint8_t)(channel / 0x100); /* set name (bytes 4...4+len-1) */ prvStrncpy((char*)&(RecorderDataPtr->SymbolTable.symbytes [ RecorderDataPtr->SymbolTable.nextFreeSymbolIndex + 4]), name, len); /* Set zero termination (at offset 4+len) */ RecorderDataPtr->SymbolTable.symbytes [RecorderDataPtr->SymbolTable.nextFreeSymbolIndex + 4 + len] = '\0'; /* store index of entry (for return value, and as head of LL[crc6]) */ RecorderDataPtr->SymbolTable.latestEntryOfChecksum [ crc6 ] = (uint16_t)RecorderDataPtr->SymbolTable.nextFreeSymbolIndex; RecorderDataPtr->SymbolTable.nextFreeSymbolIndex += (uint32_t) (len + 5); ret = (uint16_t)(RecorderDataPtr->SymbolTable.nextFreeSymbolIndex - (uint8_t)(len + 5)); } return ret; } /******************************************************************************* * prvTraceGetChecksum * * Calculates a simple 6-bit checksum from a string, used to index the string * for fast symbol table lookup. ******************************************************************************/ void prvTraceGetChecksum(const char *pname, uint8_t* pcrc, uint8_t* plength) { unsigned char c; int length = 1; /* Should be 1 to account for '\0' */ int crc = 0; TRACE_ASSERT(pname != 0, "prvTraceGetChecksum: pname == NULL", TRC_UNUSED); TRACE_ASSERT(pcrc != 0, "prvTraceGetChecksum: pcrc == NULL", TRC_UNUSED); TRACE_ASSERT(plength != 0, "prvTraceGetChecksum: plength == NULL", TRC_UNUSED); if (pname != (const char *) 0) { for (; (c = (unsigned char) *pname++) != '\0';) { crc += c; length++; } } *pcrc = (uint8_t)(crc & 0x3F); *plength = (uint8_t)length; } #if (TRC_CFG_USE_16BIT_OBJECT_HANDLES == 1) static void prvTraceStoreXID(traceHandle handle); /****************************************************************************** * prvTraceStoreXID * * Stores an XID (eXtended IDentifier) event. * This is used if an object/task handle is larger than 255. * The parameter "handle" is the full (16 bit) handle, assumed to be 256 or * larger. Handles below 256 should not use this function. * * NOTE: this function MUST be called from within a critical section. *****************************************************************************/ static void prvTraceStoreXID(traceHandle handle) { XPSEvent* xid; TRACE_ASSERT(handle >= 256, "prvTraceStoreXID: Handle < 256", TRC_UNUSED); xid = (XPSEvent*)prvTraceNextFreeEventBufferSlot(); if (xid != 0) { xid->type = XID; /* This function is (only) used when traceHandle is 16 bit... */ xid->xps_16 = handle; prvTraceUpdateCounters(); } } static uint8_t prvTraceGet8BitHandle(traceHandle handle) { if (handle > 255) { prvTraceStoreXID(handle); /* The full handle (16 bit) is stored in the XID event. This code (255) is used instead of zero (which is an error code).*/ return 255; } return (uint8_t)(handle & 0xFF); } #endif /*(TRC_CFG_USE_16BIT_OBJECT_HANDLES == 1)*/ /* If using DWT timestamping (default on ARM Cortex-M3, M4 and M7), make sure the DWT unit is initialized. */ #ifndef TRC_CFG_ARM_CM_USE_SYSTICK #if ((TRC_CFG_HARDWARE_PORT == TRC_HARDWARE_PORT_ARM_Cortex_M) && (defined (__CORTEX_M) && (__CORTEX_M >= 0x03))) void xTraceHardwarePortInitCortexM() { /* Ensure that the DWT registers are unlocked and can be modified. */ TRC_REG_ITM_LOCKACCESS = TRC_ITM_LOCKACCESS_UNLOCK; /* Make sure DWT is enabled, if supported */ TRC_REG_DEMCR |= TRC_DEMCR_TRCENA; do{ /* Verify that DWT is supported */ if (TRC_REG_DEMCR == 0) { /* This function is called on Cortex-M3, M4 and M7 devices to initialize the DWT unit, assumed present. The DWT cycle counter is used for timestamping. If the below error is produced, the DWT unit does not seem to be available. In that case, define the macro TRC_CFG_ARM_CM_USE_SYSTICK in your build to use SysTick timestamping instead, or define your own timestamping by setting TRC_CFG_HARDWARE_PORT to TRC_HARDWARE_PORT_APPLICATION_DEFINED and make the necessary definitions, as explained in trcHardwarePort.h.*/ prvTraceError("DWT unit not available, see code comment."); break; } /* Verify that DWT_CYCCNT is supported */ if (TRC_REG_DWT_CTRL & TRC_DWT_CTRL_NOCYCCNT) { /* This function is called on Cortex-M3, M4 and M7 devices to initialize the DWT unit, assumed present. The DWT cycle counter is used for timestamping. If the below error is produced, the cycle counter does not seem to be available. In that case, define the macro TRC_CFG_ARM_CM_USE_SYSTICK in your build to use SysTick timestamping instead, or define your own timestamping by setting TRC_CFG_HARDWARE_PORT to TRC_HARDWARE_PORT_APPLICATION_DEFINED and make the necessary definitions, as explained in trcHardwarePort.h.*/ prvTraceError("DWT_CYCCNT not available, see code comment."); break; } /* Reset the cycle counter */ TRC_REG_DWT_CYCCNT = 0; /* Enable the cycle counter */ TRC_REG_DWT_CTRL |= TRC_DWT_CTRL_CYCCNTENA; }while(0); /* breaks above jump here */ } #endif #endif /****************************************************************************** * prvTracePortGetTimeStamp * * Returns the current time based on the HWTC macros which provide a hardware * isolation layer towards the hardware timer/counter. * * The HWTC macros and prvTracePortGetTimeStamp is the main porting issue * or the trace recorder library. Typically you should not need to change * the code of prvTracePortGetTimeStamp if using the HWTC macros. * ******************************************************************************/ void prvTracePortGetTimeStamp(uint32_t *pTimestamp) { static uint32_t last_hwtc_count = 0; uint32_t hwtc_count = 0; #if TRC_HWTC_TYPE == TRC_OS_TIMER_INCR || TRC_HWTC_TYPE == TRC_OS_TIMER_DECR /* systick based timer */ static uint32_t last_traceTickCount = 0; uint32_t traceTickCount = 0; #else /*TRC_HWTC_TYPE == TRC_OS_TIMER_INCR || TRC_HWTC_TYPE == TRC_OS_TIMER_DECR*/ /* Free running timer */ static uint32_t last_hwtc_rest = 0; uint32_t diff = 0; uint32_t diff_scaled = 0; #endif /*TRC_HWTC_TYPE == TRC_OS_TIMER_INCR || TRC_HWTC_TYPE == TRC_OS_TIMER_DECR*/ if (trace_disable_timestamp == 1) { if (pTimestamp) *pTimestamp = last_timestamp; return; } /* Retrieve TRC_HWTC_COUNT only once since the same value should be used all throughout this function. */ #if (TRC_HWTC_TYPE == TRC_OS_TIMER_INCR || TRC_HWTC_TYPE == TRC_FREE_RUNNING_32BIT_INCR) /* Get the increasing tick count */ hwtc_count = (TRC_HWTC_COUNT); #elif (TRC_HWTC_TYPE == TRC_OS_TIMER_DECR || TRC_HWTC_TYPE == TRC_FREE_RUNNING_32BIT_DECR) /* Convert decreasing tick count into increasing tick count */ hwtc_count = (TRC_HWTC_PERIOD) - (TRC_HWTC_COUNT); #else #error "TRC_HWTC_TYPE has unexpected value" #endif #if (TRC_CFG_HARDWARE_PORT == TRC_HARDWARE_PORT_Win32) /* The Win32 port uses ulGetRunTimeCounterValue for timestamping, which in turn uses QueryPerformanceCounter. That function is not always reliable when used over multiple threads. We must therefore handle rare cases where the timestamp is less than the previous. In practice, this should "never" roll over since the performance counter is 64 bit wide. */ if (last_hwtc_count > hwtc_count) { hwtc_count = last_hwtc_count; } #endif #if (TRC_HWTC_TYPE == TRC_OS_TIMER_INCR || TRC_HWTC_TYPE == TRC_OS_TIMER_DECR) /* Timestamping is based on a timer that wraps at TRC_HWTC_PERIOD */ if (last_traceTickCount - uiTraceTickCount - 1 < 0x80000000) { /* This means last_traceTickCount is higher than uiTraceTickCount, so we have previously compensated for a missed tick. Therefore we use the last stored value because that is more accurate. */ traceTickCount = last_traceTickCount; } else { /* Business as usual */ traceTickCount = uiTraceTickCount; } /* Check for overflow. May occur if the update of uiTraceTickCount has been delayed due to disabled interrupts. */ if (traceTickCount == last_traceTickCount && hwtc_count < last_hwtc_count) { /* A trace tick has occurred but not been executed by the kernel, so we compensate manually. */ traceTickCount++; } /* Check if the return address is OK, then we perform the calculation. */ if (pTimestamp) { /* Get timestamp from trace ticks. Scale down the period to avoid unwanted overflows. */ last_timestamp = traceTickCount * ((TRC_HWTC_PERIOD) / (TRC_HWTC_DIVISOR)); /* Increase timestamp by (hwtc_count + "lost hardware ticks from scaling down period") / TRC_HWTC_DIVISOR. */ last_timestamp += (hwtc_count + traceTickCount * ((TRC_HWTC_PERIOD) % (TRC_HWTC_DIVISOR))) / (TRC_HWTC_DIVISOR); } /* Store the previous value */ last_traceTickCount = traceTickCount; #else /*(TRC_HWTC_TYPE == TRC_OS_TIMER_INCR || TRC_HWTC_TYPE == TRC_OS_TIMER_DECR)*/ /* Timestamping is based on a free running timer */ /* This part handles free running clocks that can be scaled down to avoid too large DTS values. Without this, the scaled timestamp will incorrectly wrap at (2^32 / TRC_HWTC_DIVISOR) ticks. The scaled timestamp returned from this function is supposed to go from 0 -> 2^32, which in real time would represent (0 -> 2^32 * TRC_HWTC_DIVISOR) ticks. */ /* First we see how long time has passed since the last timestamp call, and we also add the ticks that was lost when we scaled down the last time. */ diff = (hwtc_count - last_hwtc_count) + last_hwtc_rest; /* Scale down the diff */ diff_scaled = diff / (TRC_HWTC_DIVISOR); /* Find out how many ticks were lost when scaling down, so we can add them the next time */ last_hwtc_rest = diff % (TRC_HWTC_DIVISOR); /* We increase the scaled timestamp by the scaled amount */ last_timestamp += diff_scaled; #endif /*(TRC_HWTC_TYPE == TRC_OS_TIMER_INCR || TRC_HWTC_TYPE == TRC_OS_TIMER_DECR)*/ /* Is anyone interested in the results? */ if (pTimestamp) *pTimestamp = last_timestamp; /* Store the previous value */ last_hwtc_count = hwtc_count; } #if defined(TRC_CFG_ENABLE_STACK_MONITOR) && (TRC_CFG_ENABLE_STACK_MONITOR == 1) && (TRC_CFG_SCHEDULING_ONLY == 0) void prvAddTaskToStackMonitor(void* task) { int i; int foundEmptySlot = 0; // find an empty slot for (i = 0; i < TRC_CFG_STACK_MONITOR_MAX_TASKS; i++) { if (tasksInStackMonitor[i].tcb == 0) { tasksInStackMonitor[i].tcb = task; tasksInStackMonitor[i].uiPreviousLowMark = 0xFFFFFFFF; foundEmptySlot = 1; break; } } if (foundEmptySlot == 0) { tasksNotIncluded++; } } void prvRemoveTaskFromStackMonitor(void* task) { int i; for (i = 0; i < TRC_CFG_STACK_MONITOR_MAX_TASKS; i++) { if (tasksInStackMonitor[i].tcb == task) { tasksInStackMonitor[i].tcb = 0; tasksInStackMonitor[i].uiPreviousLowMark = 0; } } } void prvReportStackUsage() { static int i = 0; /* Static index used to loop over the monitored tasks */ int count = 0; /* The number of generated reports */ int initial = i; /* Used to make sure we break if we are back at the inital value */ do { /* Check the current spot */ if (tasksInStackMonitor[i].tcb != 0) { /* Get the amount of unused stack */ uint32_t unusedStackSpace; xTraceKernelPortGetUnusedStack(tasksInStackMonitor[i].tcb, &unusedStackSpace); /* Store for later use */ if (tasksInStackMonitor[i].uiPreviousLowMark > unusedStackSpace) tasksInStackMonitor[i].uiPreviousLowMark = unusedStackSpace; prvTraceStoreKernelCallWithParam(TRACE_UNUSED_STACK, TRACE_CLASS_TASK, TRACE_GET_TASK_NUMBER(tasksInStackMonitor[i].tcb), tasksInStackMonitor[i].uiPreviousLowMark); count++; } i = (i + 1) % TRC_CFG_STACK_MONITOR_MAX_TASKS; // Move i beyond this task } while (count < TRC_CFG_STACK_MONITOR_MAX_REPORTS && i != initial); } #endif /* defined(TRC_CFG_ENABLE_STACK_MONITOR) && (TRC_CFG_ENABLE_STACK_MONITOR == 1) && (TRC_CFG_SCHEDULING_ONLY == 0) */ #endif /* (TRC_USE_TRACEALYZER_RECORDER == 1) */ #endif /*(TRC_CFG_RECORDER_MODE == TRC_RECORDER_MODE_SNAPSHOT)*/