Lines Matching +full:xtensa +full:- +full:build +full:- +full:all

1 # SPDX-License-Identifier: BSD-3-Clause
39 	  with 8 - 192 kHz input and 8 - 48 kHz output. The coefficients
49 	  with 8 - 48 kHz input and output. The coefficients are 32 bits
58 	  with 8 - 48 kHz input and output. The coefficients are 16 bits
59 	  that restricts the possible stop-attenuation and could cause
94 	  are available in ISA and are used by the compiler. i.e. xt-xcc on
95 	  xtensa will generate MAC instructions but GCC on xtensa won't.
111 	  cos algorithm converges, when the angle is in the range [-pi/2, pi/2).
113 	  or subtracted from the angle until it is within the range [-pi/2,pi/2).
114 	  Start with the angle in the range [-2*pi, 2*pi) and output has range in
115 	  [-1.0 to 1.0]
192 	int "DRC max number of pre-delay frames"
195 	  Determines the length of pre-delay frame buffers which are allocated
198 	  length for pre-delay frames.
207 	  consists of Emphasis Equalizer, n-way Crossover Filter, per-band DRC,
240 	  not have pre-computed filter coefficients for every
262 	  This option enables all supported downsampling conversions
263 	  for the asynchronous sample rate conversion. All the
273 	  converter, non-required conversion ratios can be
275 	  converter always supports all conversion ratios with fs_in
277 	  deactivate all conversion ratios listed below, if we only
293 	  the build. The consumption of memory is 2.1 kB.
300 	  the build. The consumption of memory is 1.9 kB.
307 	  the build. The consumption of memory is 2.1 kB.
314 	  into the build. The consumption of memory is 1.5 kB.
321 	  the build. The consumption of memory is 1.5 kB.
328 	  the build. The consumption of memory is 1.9 kB.
335 	  the build. The consumption of memory is 1.6 kB.
342 	  the build. The consumption of memory is 1.6 kB.
349 	  the build. The consumption of memory is 1.9 kB.
356 	  into the build. The consumption of memory is 1.8 kB.
369           suppression of noise and improvement of signal-to-noise ratio of
393 	  This option enables Intelligo non-speech noise reduction. The feature links to a proprietary
394 	  binary libigonr.a that currently is supported on different Xtensa DSP platforms. Please email
395 	  info@intelli-go.com for any questions about the binary.
403 	  single-channel speech signals, which increases the signal-to-noise ratio,
406 	  according to improve signal-to-noise ratios. The feature links to a
469 	bool "Support S16C16 <-> S16C32"
476 	bool "Support S16C32 <-> S32C32"
483 	bool "Support S16C32 <-> S24C32"