Lines Matching refs:when
425 The ephemeral key can be set when Border Agent is already running and is not currently connected to…
901 The counter tracks the number of supervision check failures on the child. It is incremented when th…
1418 > Note: The command will return `InvalidState` when the DNS server IP is an IPv4 address but the pr…
1459 …rt number, weight, host name, TXT data, host addresses) is outputted only when provided by server/…
1461 …by the OpenThread DNS-SD resolver, is to only provide the additional data when there is a single i…
1484 …AT64 prefix from the network data. The command will return `InvalidState` when the DNS server IP i…
1492 …AT64 prefix from the network data. The command will return `InvalidState` when the DNS server IP i…
1986 …g Subject correctly handles invalid Type Id Flags. This is only available when `OPENTHREAD_CONFIG_…
2201 …s filename to capture otPlatLog() messages, useful when debugging automated test scripts on Linux …
2240 - Whether the router is the parent of this device when device is a child (`parent`)
2252 …- Child Device mode (`r` rx-on-when-idle, `d` Full Thread Device, `n` Full Network Data, `-` no fl…
2485 - -: no flags set (rx-off-when-idle, minimal Thread device, stable network data)
2486 - r: rx-on-when-idle
2500 - -: no flags set (rx-off-when-idle, minimal Thread device, stable network data)
2501 - r: rx-on-when-idle
2519 This command is always available, even when only a single radio is supported by the device.
2531 This command is only available when device supports more than one radio link.
2544 This command is only available when device supports more than one radio link.
2613 … is enabled and is running, but is not publishing a NAT64 prefix. Usually when there is another bo…
2949 … a Thread Router when `OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE` is enabled, this command will re…
3048 > Note: The command will return `InvalidState` when the preferred NAT64 prefix is unavailable.
3142 Prefer a Router ID when solicit router id from Leader.
3263 The radio statistics shows the time when the radio is in sleep/tx/rx state. The command will show t…
3669 Return true when there are no other nodes in the network, otherwise return false.
3714 Taking over the leader role in this way is only allowed when triggered by an explicit user action. …
3814 …racked for direct transmissions only and is measured as the duration from when a message is added …
3883 …racked for direct transmissions only and is measured as the duration from when a message is added …
4009 Enable thread version check when upgrading to router or leader.
4022 Disable thread version check when upgrading to router or leader.
4265 …an empty mac data. This feature is for certification, it can only be used when `OPENTHREAD_CONFIG_…
4427 Factory Diagnostics module is enabled only when building OpenThread with `OPENTHREAD_CONFIG_DIAG_EN…