Lines Matching refs:network

1174 Executes a series of CLI commands to gather information about the device and thread network. This i…
1416 …hich will be synthesized to an IPv6 address using the preferred NAT64 prefix from the network data.
1484 …synthesized to an IPv6 address using the preferred NAT64 prefix from the network data. The command…
1492 …synthesized to an IPv6 address using the preferred NAT64 prefix from the network data. The command…
2224 Discover network topology (list of routers and their connections).
2256 Discover network topology:
2275 Discover network topology with router's IPv6 addresses and children:
2329 Discover network topology with children:
2485 - -: no flags set (rx-off-when-idle, minimal Thread device, stable network data)
2500 - -: no flags set (rx-off-when-idle, minimal Thread device, stable network data)
2775 Send network diagnostic request to retrieve tlv of \<type\>s.
2805 Send network diagnostic request to reset \<addr\>'s tlv of \<type\>s. Currently only `MAC Counters`…
2873 Get the Thread network time and the time sync parameters.
3046 …hich will be synthesized to an IPv6 address using the preferred NAT64 prefix from the network data.
3108 With `-p` generate pskc from \<passphrase\> (UTF-8 encoded) together with **current** network name …
3669 Return true when there are no other nodes in the network, otherwise return false.
3710 …tached, this command will force the device to start as the leader of the network. This use case is…
3782 Enable Thread protocol operation and attach to a Thread network.
3791 Disable Thread protocol operation and detach from a Thread network.