Lines Matching refs:Router

157 Show current Primary Backbone Router information for Thread 1.2 device.
203 Only for testing/reference Backbone Router device.
216 Only for testing/reference Backbone Router device.
233 Only for testing/reference Backbone Router device.
284 Enable Backbone Router Service for Thread 1.2 FTD. `SRV_DATA.ntf` would be triggered for attached d…
295 Disable Backbone Router Service for Thread 1.2 FTD. `SRV_DATA.ntf` would be triggered if Backbone R…
304 Register Backbone Router Service for Thread 1.2 FTD. `SRV_DATA.ntf` would be triggered for attached…
315 Show local Backbone Router configuration for Thread 1.2 FTD.
329 …Router configuration for Thread 1.2 FTD. `bbr register` should be issued explicitly to register Ba…
340 Show jitter (in seconds) for Backbone Router registration for Thread 1.2 FTD.
352 Set jitter (in seconds) for Backbone Router registration for Thread 1.2 FTD.
1082 Role Router: 0
1092 Time Router Milli: 0
1193 - Router table and next hop Info
1934 Leader Router ID: 60
2235 - Router ID
2244   - `3-links`: Router IDs to which this router has a incoming link with link quality 3
2245   - `2-links`: Router IDs to which this router has a incoming link with link quality 2
2246   - `1-links`: Router IDs to which this router has a incoming link with link quality 1
2457 Register Multicast Listeners to Primary Backbone Router, with an optional `timeout` (in seconds).
2459 Omit `timeout` to use the default MLR timeout on the Primary Backbone Router.
2814 Get the NETWORK_ID_TIMEOUT parameter used in the Router role.
2824 Set the NETWORK_ID_TIMEOUT parameter used in the Router role.
2888 - xtalthreshold: The XTAL accuracy threshold for a device to become Router-Capable device, in PPM.
2897 Output the table of allocated Router IDs and the current next hop (as Router ID) and path cost for …
2947 Get the diagnostic information for a Thread Router as parent.
2949 …Router when `OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE` is enabled, this command will return the c…
3142 Prefer a Router ID when solicit router id from Leader.
3353 Release a Router ID that has been allocated by the device in the Leader role.
3406 - prf: Default Router Preference, which may be: 'high', 'med', or 'low'.
3424 List allocated Router IDs.
3447 Print diagnostic information for a Thread Router. The `id` may be a Router ID or an RLOC16.
3452 Router ID: 50
3467 Router ID: 50
3689 You can use NAT64 of OpenThread Border Router to reach e.g. Google IPv4 NTP Server:
3722 Leader Router ID: 59