Lines Matching +full:backbone +full:- +full:router
24 - [attachtime](#attachtime)
25 - [ba](#ba)
26 - [bbr](#bbr)
27 - [br](README_BR.md)
28 - [bufferinfo](#bufferinfo)
29 - [ccathreshold](#ccathreshold)
30 - [channel](#channel)
31 - [child](#child-list)
32 - [childip](#childip)
33 - [childmax](#childmax)
34 - [childsupervision](#childsupervision-interval)
35 - [childtimeout](#childtimeout)
36 - [coap](README_COAP.md)
37 - [coaps](README_COAPS.md)
38 - [coex](#coex)
39 - [commissioner](README_COMMISSIONER.md)
40 - [contextreusedelay](#contextreusedelay)
41 - [counters](#counters)
42 - [csl](#csl)
43 - [dataset](README_DATASET.md)
44 - [debug](#debug)
45 - [delaytimermin](#delaytimermin)
46 - [detach](#detach)
47 - [deviceprops](#deviceprops)
48 - [diag](#diag)
49 - [discover](#discover-channel)
50 - [dns](#dns-config)
51 - [domainname](#domainname)
52 - [dua](#dua-iid)
53 - [eidcache](#eidcache)
54 - [eui64](#eui64)
55 - [extaddr](#extaddr)
56 - [extpanid](#extpanid)
57 - [factoryreset](#factoryreset)
58 - [fake](#fake)
59 - [fem](#fem)
60 - [history](README_HISTORY.md)
61 - [ifconfig](#ifconfig)
62 - [instanceid](#instanceid)
63 - [ipaddr](#ipaddr)
64 - [ipmaddr](#ipmaddr)
65 - [joiner](README_JOINER.md)
66 - [joinerport](#joinerport-port)
67 - [keysequence](#keysequence-counter)
68 - [leaderdata](#leaderdata)
69 - [leaderweight](#leaderweight)
70 - [linkmetrics](#linkmetrics-config-async-ipaddr-enhanced-ack-clear)
71 - [linkmetricsmgr](#linkmetricsmgr-disable)
72 - [locate](#locate)
73 - [log](#log-filename-filename)
74 - [mac](#mac-altshortaddr)
75 - [macfilter](#macfilter)
76 - [meshdiag](#meshdiag-topology-ip6-addrs-children)
77 - [mliid](#mliid-iid)
78 - [mlr](#mlr-reg-ipaddr--timeout)
79 - [mode](#mode)
80 - [multiradio](#multiradio)
81 - [nat64](#nat64-cidr)
82 - [neighbor](#neighbor-list)
83 - [netdata](README_NETDATA.md)
84 - [netstat](#netstat)
85 - [networkdiagnostic](#networkdiagnostic-get-addr-type-)
86 - [networkidtimeout](#networkidtimeout)
87 - [networkkey](#networkkey)
88 - [networkname](#networkname)
89 - [networktime](#networktime)
90 - [nexthop](#nexthop)
91 - [panid](#panid)
92 - [parent](#parent)
93 - [parentpriority](#parentpriority)
94 - [partitionid](#partitionid)
95 - [ping](#ping-async--i-source--m-ipaddr-size-count-interval-hoplimit-timeout)
96 - [platform](#platform)
97 - [pollperiod](#pollperiod-pollperiod)
98 - [preferrouterid](#preferrouterid-routerid)
99 - [prefix](#prefix)
100 - [promiscuous](#promiscuous)
101 - [pskc](#pskc)
102 - [pskcref](#pskcref)
103 - [radio](#radio-enable)
104 - [radiofilter](#radiofilter)
105 - [rcp](#rcp)
106 - [region](#region)
107 - [releaserouterid](#releaserouterid-routerid)
108 - [reset](#reset)
109 - [rloc16](#rloc16)
110 - [route](#route)
111 - [router](#router-list)
112 - [routerdowngradethreshold](#routerdowngradethreshold)
113 - [routereligible](#routereligible)
114 - [routerselectionjitter](#routerselectionjitter)
115 - [routerupgradethreshold](#routerupgradethreshold)
116 - [childrouterlinks](#childrouterlinks)
117 - [scan](#scan-channel)
118 - [service](#service)
119 - [singleton](#singleton)
120 - [sntp](#sntp-query-sntp-server-ip-sntp-server-port)
121 - [state](#state)
122 - [srp](README_SRP.md)
123 - [tcat](README_TCAT.md)
124 - [tcp](README_TCP.md)
125 - [test](#test-tmforiginfilter-enabledisable)
126 - [thread](#thread-start)
127 - [timeinqueue](#timeinqueue)
128 - [trel](#trel)
129 - [tvcheck](#tvcheck-enable)
130 - [txpower](#txpower)
131 - [udp](README_UDP.md)
132 - [unsecureport](#unsecureport-add-port)
133 - [uptime](#uptime)
134 - [vendor](#vendor-name)
135 - [verhoeff](#verhoeff-calculate)
136 - [version](#version)
137 - [wakeup](#wakeup-channel)
157 Show current Primary Backbone Router information for Thread 1.2 device.
175 ### bbr mgmt dua \<status\|coap-code\> [meshLocalIid]
183 - 0: ST_DUA_SUCCESS
184 - 1: ST_DUA_REREGISTER
185 - 2: ST_DUA_INVALID
186 - 3: ST_DUA_DUPLICATE
187 - 4: ST_DUA_NO_RESOURCES
188 - 5: ST_DUA_BBR_NOT_PRIMARY
189 - 6: ST_DUA_GENERAL_FAILURE
190 - 160: COAP code 5.00
203 Only for testing/reference Backbone Router device.
216 Only for testing/reference Backbone Router device.
233 Only for testing/reference Backbone Router device.
250 - 0: ST_MLR_SUCCESS
251 - 2: ST_MLR_INVALID
252 - 3: ST_MLR_NO_PERSISTENT
253 - 4: ST_MLR_NO_RESOURCES
254 - 5: ST_MLR_BBR_NOT_PRIMARY
255 - 6: ST_MLR_GENERAL_FAILURE
264 Show local Backbone state ([`Disabled`,`Primary`, `Secondary`]) for Thread 1.2 FTD.
284 Enable Backbone Router Service for Thread 1.2 FTD. `SRV_DATA.ntf` would be triggered for attached d…
295 Disable Backbone Router Service for Thread 1.2 FTD. `SRV_DATA.ntf` would be triggered if Backbone R…
304 Register Backbone Router Service for Thread 1.2 FTD. `SRV_DATA.ntf` would be triggered for attached…
315 Show local Backbone Router configuration for Thread 1.2 FTD.
329 …Backbone Router configuration for Thread 1.2 FTD. `bbr register` should be issued explicitly to re…
340 Show jitter (in seconds) for Backbone Router registration for Thread 1.2 FTD.
352 Set jitter (in seconds) for Backbone Router registration for Thread 1.2 FTD.
381 - `Stopped` : Border Agent is stopped.
382 - `Started` : Border Agent is running with no active connection with external commissioner.
383 - `Active` : Border Agent is running and is connected with an external commissioner.
512 - The `total` shows total number of message buffers in pool.
513 - The `free` shows the number of free message buffers.
514 - The `max-used` shows the maximum number of used buffers at the same time since OT stack initializ…
515 - This is then followed by info about different queues used by OpenThread stack, each line represen…
516 - The first number shows number messages in the queue.
517 - The second number shows number of buffers used by all messages in the queue.
518 - The third number shows total number of bytes of all messages in the queue.
524 max-used: 5
547 Get the CCA threshold in dBm measured at antenna connector per IEEE 802.15.4 - 2015 section 10.1.4.
551 -75 dBm
557 Set the CCA threshold measured at antenna connector per IEEE 802.15.4 - 2015 section 10.1.4.
560 > ccathreshold -62
594 supported: { 11-26}
595 favored: { 11-26}
625 Enable/disable the auto-channel-selection functionality.
649 Set the auto-channel-selection interval (in seconds).
661 Set the supported channel mask for the auto-channel-selection.
673 Set the favored channel mask for the auto-channel-selection.
694 threshold: -75
779 +-----+--------+------------+------------+-------+------+-+-+-+---+---+-------+-------+------------…
800 RSSI: -20
880 …hear from its parent within the specified check timeout, it initiates the re-attach process (MLE C…
1041 - `OPENTHREAD_CONFIG_UPTIME_ENABLE` is required for MLE role time tracking in `counters mle`
1042 - `OPENTHREAD_CONFIG_IP6_BR_COUNTERS_ENABLE` is required for `counters br`
1082 Role Router: 0
1092 Time Router Milli: 0
1180 - Version
1181 - Current state
1182 - RLOC16, extended MAC address
1183 - Unicast and multicast IPv6 address list
1184 - Channel
1185 - PAN ID and extended PAN ID
1186 - Network Data
1187 - Partition ID
1188 - Leader Data
1192 - Child and neighbor table
1193 - Router table and next hop Info
1194 - Address cache table
1195 - Registered MTD child IPv6 address
1196 - Device properties
1200 - SRP client state
1201 - SRP client services and host info
1205 - SRP server state and address mode
1206 - SRP server registered hosts and services
1210 - TREL status and peer table
1212 If the device supports and acts as a border router:
1214 - BR state
1215 - BR prefixes (OMR, on-link, NAT64)
1216 - Discovered prefix table
1239 …s by first notifying other nodes (sending Address Release if acting as a router, or setting Child …
1270 ### deviceprops \<power-supply\> \<is-br\> \<supports-ccm\> \<is-unstable\> \<weight-adjustment\>
1274 - power-supply: `battery`, `external`, `external-stable`, or `external-unstable`.
1275 - weight-adjustment: Valid range is from -16 to +16. Clamped if not within the range.
1278 > deviceprops battery 0 0 0 -5
1286 WeightAdjustment : -5
1298 - channel: The channel to discover on. If no channel is provided, the discovery will cover all vali…
1303 +---+------------------+------------------+------+------------------+----+-----+-----+
1304 | 0 | OpenThread | dead00beef00cafe | ffff | f1d92a82c8d8fe43 | 11 | -20 | 0 |
1314 - Server IPv6 address and port
1315 - Response timeout in msec (wait time to rx response)
1316 - Maximum tx attempts before reporting failure
1317 - Boolean flag to indicate whether the server can resolve the query recursively or not.
1318 - Service resolution mode which specifies which records to query. Possible options are:
1319 - `srv` : Query for SRV record only.
1320 - `txt` : Query for TXT record only.
1321 - `srv_txt` : Query for both SRV and TXT records in the same message.
1322 - `srv_txt_sep`: Query in parallel for SRV and TXT using separate messages.
1323 - `srv_txt_opt`: Query for TXT/SRV together first, if it fails then query separately.
1324 - Whether to allow/disallow NAT64 address translation during address resolution (requires `OPENTHRE…
1325 - Transport protocol UDP or TCP (requires `OPENTHREAD_CONFIG_DNS_CLIENT_OVER_TCP_ENABLE`)
1346 - `def` : Use default option.
1347 - `srv` : Query for SRV record only.
1348 - `txt` : Query for TXT record only.
1349 - `srv_txt` : Query for both SRV and TXT records in the same message.
1350 - `srv_txt_sep`: Query in parallel for SRV and TXT using separate messages.
1351 - `srv_txt_opt`: Query for TXT/SRV together first, if it fails then query separately.
1413 > DNS response for ipv6.google.com - 2a00:1450:401b:801:0:0:0:200e TTL: 300
1423 DNS response for example.com. - fd4c:9574:3720:2:0:0:5db8:d822 TTL:20456
1441 > DNS response for ipv4.google.com - 2001:db8:122:344:0:0:8efa:bf4e TTL: 20456
1444 ### dns browse \<service-name\> \[DNS server IP\] \[DNS server port\] \[response timeout (ms)\] \[m…
1446 …browse (service instance enumeration) DNS query to get the list of services for given service-name.
1448 The parameters after `service-name` are optional. Any unspecified (or zero) value for these optiona…
1461 The recommended behavior, which is supported by the OpenThread DNS-SD resolver, is to only provide …
1479 Host:Gabes-Mac-mini.default.service.arpa.
1484 …IPv4 address but the preferred NAT64 prefix is unavailable. When testing DNS-SD discovery proxy, t…
1486 ### dns service \<service-instance-label\> \<service-name\> \[DNS server IP\] \[DNS server port\] \…
1490 The parameters after `service-name` are optional. Any unspecified (or zero) value for these optiona…
1494 ### dns servicehost \<service-instance-label\> \<service-name\> \[DNS server IP\] \[DNS server port…
1496 Send a service instance resolution DNS query for a given service instance with a potential follow-u…
1500 The parameters after `service-name` are optional. Any unspecified (or zero) value for these optiona…
1599 Print the EID-to-RLOC cache entries.
1610 Get the factory-assigned IEEE EUI-64.
1642 …oning credential becomes stale after changing this value. Use [pskc](#pskc--p-keypassphrase) to re…
1673 #### fake /a/an \<dst-ipaddr\> \<target\> \<meshLocalIid\>
1759 Use `-v` to get more verbose information about the address:
1761 - `origin`: can be `thread`, `slaac`, `dhcp6`, or `manual`, and indicates the origin of the address
1762 - `plen`: prefix length (in bits)
1763 - `preferred`: preferred flag (boolean)
1764 - `valid`: valid flag (boolean)
1767 > ipaddr -v
1795 Print Thread link-local IPv6 address.
1855 Get the Link-Local All Thread Nodes multicast address.
1865 Get the Realm-Local All Thread Nodes multicast address.
1896 …only. Changing Key Sequence Counter will render a production application non-compliant with the Th…
1917 …nly. Changing Key Switch Guard Time will render a production application non-compliant with the Th…
1934 Leader Router ID: 60
1957 ### linkmetrics config \[async\] \<ipaddr\> enhanced-ack clear
1959 Send a Link Metrics Management Request to clear an Enhanced-ACK Based Probing.
1961 - async: Use the non-blocking mode.
1962 - ipaddr: Peer address (SHOULD be link local address of the neighboring device).
1965 > linkmetrics config fe80:0:0:0:3092:f334:1455:1ad2 enhanced-ack clear
1970 > linkmetrics config async fe80:0:0:0:3092:f334:1455:1ad2 enhanced-ack clear
1976 ### linkmetrics config \[async\] \<ipaddr\> enhanced-ack register \<qmr\> \[r\]
1978 Send a Link Metrics Management Request to register an Enhanced-ACK Based Probing.
1980 - async: Use the non-blocking mode.
1981 - ipaddr: Peer address.
1982 - qmr: This specifies what metrics to query. At most two options are allowed to select (per spec 4.…
1983 - q: Layer 2 LQI.
1984 - m: Link Margin.
1985 - r: RSSI.
1986 - r: This is optional and only used for reference devices. When this option is specified, Type/Aver…
1989 > linkmetrics config fe80:0:0:0:3092:f334:1455:1ad2 enhanced-ack register qm
1994 > linkmetrics config async fe80:0:0:0:3092:f334:1455:1ad2 enhanced-ack register qm
1999 > linkmetrics config async fe80:0:0:0:3092:f334:1455:1ad2 enhanced-ack register qm r
2009 - async: Use the non-blocking mode.
2010 - ipaddr: Peer address.
2011 - seriesid: The Series ID.
2012 - ldraX: This specifies which frames are to be accounted.
2013 - l: MLE Link Probe.
2014 - d: MAC Data.
2015 - r: MAC Data Request.
2016 - a: MAC Ack.
2017 …- X: This represents none of the above flags, i.e., to stop accounting and remove the series. This…
2018 - pqmr: This specifies what metrics to query.
2019 - p: Layer 2 Number of PDUs received.
2020 - q: Layer 2 LQI.
2021 - m: Link Margin.
2022 - r: RSSI.
2040 - ipaddr: Peer address.
2041 - seriesid: The Series ID for which this Probe message targets at.
2042 - length: The length of the Probe message, valid range: [0, 64].
2053 - async: Use the non-blocking mode.
2054 - ipaddr: Peer address.
2055 - pqmr: This specifies what metrics to query.
2056 - p: Layer 2 Number of PDUs received.
2057 - q: Layer 2 LQI.
2058 - m: Link Margin.
2059 - r: RSSI.
2065 - LQI: 76 (Exponential Moving Average)
2066 - Margin: 82 (dB) (Exponential Moving Average)
2067 - RSSI: -18 (dBm) (Exponential Moving Average)
2074 - LQI: 76 (Exponential Moving Average)
2075 - Margin: 82 (dB) (Exponential Moving Average)
2076 - RSSI: -18 (dBm) (Exponential Moving Average)
2083 - sync: Use the blocking mode.
2084 - ipaddr: Peer address.
2085 - seriesid: The Series ID.
2091 - PDU Counter: 2 (Count/Summation)
2092 - LQI: 76 (Exponential Moving Average)
2093 - Margin: 82 (dB) (Exponential Moving Average)
2094 - RSSI: -18 (dBm) (Exponential Moving Average)
2101 - PDU Counter: 2 (Count/Summation)
2102 - LQI: 76 (Exponential Moving Average)
2103 - Margin: 82 (dB) (Exponential Moving Average)
2104 - RSSI: -18 (dBm) (Exponential Moving Average)
2138 ExtAddr:827aa7f7f63e1234, LinkMargin:80, Rssi:-20
2198 - Note: Simulation Only, ie: `OPENTHREAD_EXAMPLES_SIMULATION`
2199 - Requires `OPENTHREAD_CONFIG_LOG_OUTPUT == OPENTHREAD_CONFIG_LOG_OUTPUT_DEBUG_UART`
2222 ### meshdiag topology \[ip6-addrs\] \[children\]
2230 - `ip6-addrs` to discover the list of IPv6 addresses of every router.
2231 - `children` to discover the child table of every router.
2233 Output lists all discovered routers. Information per router:
2235 - Router ID
2236 - RLOC16
2237 - Extended MAC address
2238 - Thread Version (if known).
2239 - Whether the router is this device is itself (`me`)
2240 - Whether the router is the parent of this device when device is a child (`parent`)
2241 - Whether the router is `leader`
2242 - Whether the router acts as a border router providing external connectivity (`br`)
2243 - List of routers to which this router has a link:
2244 - `3-links`: Router IDs to which this router has a incoming link with link quality 3
2245 - `2-links`: Router IDs to which this router has a incoming link with link quality 2
2246 - `1-links`: Router IDs to which this router has a incoming link with link quality 1
2247 - If a list if empty, it is omitted in the out.
2248 - If `ip6-addrs`, list of IPv6 addresses of the router
2249 - If `children`, list of all children of the router. Information per child:
2250 - RLOC16
2251 - Incoming Link Quality from perspective of parent to child (zero indicates unknown)
2252 …- Child Device mode (`r` rx-on-when-idle, `d` Full Thread Device, `n` Full Network Data, `-` no fl…
2253 - Whether the child is this device itself (`me`)
2254 - Whether the child acts as a border router providing external connectivity (`br`)
2260 id:02 rloc16:0x0800 ext-addr:8aa57d2c603fe16c ver:4 - me - leader
2261 3-links:{ 46 }
2262 id:46 rloc16:0xb800 ext-addr:fe109d277e0175cc ver:4
2263 3-links:{ 02 51 57 }
2264 id:33 rloc16:0x8400 ext-addr:d2e511a146b9e54d ver:4
2265 3-links:{ 51 57 }
2266 id:51 rloc16:0xcc00 ext-addr:9aab43ababf05352 ver:4
2267 3-links:{ 33 57 }
2268 2-links:{ 46 }
2269 id:57 rloc16:0xe400 ext-addr:dae9c4c0e9da55ff ver:4
2270 3-links:{ 46 51 }
2271 1-links:{ 33 }
2275 Discover network topology with router's IPv6 addresses and children:
2278 > meshdiag topology children ip6-addrs
2279 id:62 rloc16:0xf800 ext-addr:ce349873897233a5 ver:4 - me - br
2280 3-links:{ 46 }
2281 ip6-addrs:
2286 id:02 rloc16:0x0800 ext-addr:8aa57d2c603fe16c ver:4 - leader - br
2287 3-links:{ 46 51 }
2288 ip6-addrs:
2296 id:33 rloc16:0x8400 ext-addr:d2e511a146b9e54d ver:4
2297 3-links:{ 57 }
2298 ip6-addrs:
2303 id:51 rloc16:0xcc00 ext-addr:9aab43ababf05352 ver:4
2304 3-links:{ 02 46 57 }
2305 ip6-addrs:
2310 id:57 rloc16:0xe400 ext-addr:dae9c4c0e9da55ff ver:4
2311 3-links:{ 33 51 }
2312 ip6-addrs:
2317 rloc16:0xe402 lq:3, mode:rn - br
2319 id:46 rloc16:0xb800 ext-addr:fe109d277e0175cc ver:4
2320 3-links:{ 02 51 62 }
2321 ip6-addrs:
2333 id:02 rloc16:0x0800 ext-addr:8aa57d2c603fe16c ver:4 - parent - leader - br
2334 3-links:{ 46 51 }
2337 rloc16:0x0804 lq:0, mode:rdn - me
2338 id:46 rloc16:0xb800 ext-addr:fe109d277e0175cc ver:4
2339 3-links:{ 02 51 62 }
2341 id:33 rloc16:0x8400 ext-addr:d2e511a146b9e54d ver:4
2342 3-links:{ 57 }
2344 id:51 rloc16:0xcc00 ext-addr:9aab43ababf05352 ver:4
2345 3-links:{ 02 46 57 }
2347 id:57 rloc16:0xe400 ext-addr:dae9c4c0e9da55ff ver:4
2348 3-links:{ 33 51 }
2350 rloc16:0xe402 lq:3, mode:rn - br
2352 id:62 rloc16:0xf800 ext-addr:ce349873897233a5 ver:4 - br
2353 3-links:{ 46 }
2357 ### meshdiag childtable \<router-rloc16\>
2359 Start a query for child table of a router with a given RLOC16.
2363 - RLOC16
2364 - Extended MAC address
2365 - Thread Version
2366 - Timeout (in seconds)
2367 - Age (seconds since last heard)
2368 - Supervision interval (in seconds)
2369 - Number of queued messages (in case the child is sleepy)
2370 - Device Mode
2371 - RSS (average and last) and link margin
2372 - Error rates, frame tx (at MAC layer), IPv6 message tx (above MAC)
2373 - Connection time (seconds since link establishment {dd}d.{hh}:{mm}:{ss} format)
2374 - CSL info
2375 - If synchronized
2376 - Period (in unit of 10-symbols-time)
2377 - Timeout (in seconds)
2378 - Channel
2382 rloc16:0x6402 ext-addr:8e6f4d323bbed1fe ver:4
2383 timeout:120 age:36 supvn:129 q-msg:0
2384 rx-on:yes type:ftd full-net:yes
2385 rss - ave:-20 last:-20 margin:80
2386 err-rate - frame:11.51% msg:0.76%
2387 conn-time:00:11:07
2388 csl - sync:no period:0 timeout:0 channel:0
2389 rloc16:0x6403 ext-addr:ee24e64ecf8c079a ver:4
2390 timeout:120 age:19 supvn:129 q-msg:0
2391 rx-on:no type:mtd full-net:no
2392 rss - ave:-20 last:-20 margin:80
2393 err-rate - frame:0.73% msg:0.00%
2394 conn-time:01:08:53
2395 csl - sync:no period:0 timeout:0 channel:0
2399 ### meshdiag childip6 \<parent-rloc16\>
2405 child-rloc16: 0xdc02
2409 child-rloc16: 0xdc03
2416 ### meshdiag routerneighbortable \<router-rloc16\>
2418 Start a query for router neighbor table of a router with a given RLOC16.
2420 Output lists all router neighbor entries. Information per entry:
2422 - RLOC16
2423 - Extended MAC address
2424 - Thread Version
2425 - RSS (average and last) and link margin
2426 - Error rates, frame tx (at MAC layer), IPv6 message tx (above MAC)
2427 - Connection time (seconds since link establishment {dd}d.{hh}:{mm}:{ss} format)
2431 rloc16:0x9c00 ext-addr:764788cf6e57a4d2 ver:4
2432 rss - ave:-20 last:-20 margin:80
2433 err-rate - frame:1.38% msg:0.00%
2434 conn-time:01:54:02
2435 rloc16:0x7c00 ext-addr:4ed24fceec9bf6d3 ver:4
2436 rss - ave:-20 last:-20 margin:80
2437 err-rate - frame:0.72% msg:0.00%
2438 conn-time:00:11:27
2457 Register Multicast Listeners to Primary Backbone Router, with an optional `timeout` (in seconds).
2459 Omit `timeout` to use the default MLR timeout on the Primary Backbone Router.
2485 - -: no flags set (rx-off-when-idle, minimal Thread device, stable network data)
2486 - r: rx-on-when-idle
2487 - d: Full Thread Device
2488 - n: Full Network Data
2500 - -: no flags set (rx-off-when-idle, minimal Thread device, stable network data)
2501 - r: rx-on-when-idle
2502 - d: Full Thread Device
2503 - n: Full Network Data
2511 > mode -
2570 - `OPENTHREAD_CONFIG_NAT64_TRANSLATOR_ENABLE` is required.
2571 - A valid CIDR must have a non-zero prefix length.
2572 - When updating the CIDR, NAT64 translator will be reset and all existing sessions will be expired.
2611 - `Disabled`: NAT64 prefix manager is disabled.
2612 - `NotRunning`: NAT64 prefix manager is enabled, but is not running, probably because the routing m…
2613 - `Idle`: NAT64 prefix manager is enabled and is running, but is not publishing a NAT64 prefix. Usu…
2614 - `Active`: NAT64 prefix manager is enabled, running and publishing a NAT64 prefix.
2618 - `Disabled`: NAT64 translator is disabled.
2619 - `NotRunning`: NAT64 translator is enabled, but is not translating packets, probably because it is…
2620 - `Active`: NAT64 translator is enabled and is translating packets.
2650 +----------+---------------------------+--------+--------------+--------------+
2652 +----------+------------+--------------+--------+------+-------+------+-------+
2668 +---------------+-------------------------+-------------------------+
2670 +---------------+----------+--------------+----------+--------------+
2676 +---------------+-------------------------+-------------------------+
2691 +--------+------------------+-------------+-----------+---------+----------+-------+
2692 | 0xe800 | 9e2fa4e1b84f92db | 0.00 % | 0.00 % | -46 | -48 | 1 |
2693 | 0xc001 | 0ad7ed6beaa6016d | 4.67 % | 0.08 % | -68 | -72 | 10 |
2714 +------+--------+-----+----------+-----------+-+-+-+------------------+
2715 | C | 0xcc01 | 96 | -46 | -46 |1|1|1| 1eb9ba8a6522636b |
2716 | R | 0xc800 | 2 | -29 | -29 |1|1|1| 9a91556102c39ddb |
2717 | R | 0xf000 | 3 | -28 | -28 |1|1|1| 0ad7ed6beaa6016d |
2727 - RLOC16
2728 - Extended MAC address
2729 - Age (seconds since last heard from neighbor)
2730 - Connection time (seconds since link establishment with neighbor)
2737 +--------+------------------+------------------+------------------+
2752 0x8401 1a28be396a14a318 age:63 conn-time:644
2753 0x5c00 723ebf0d9eba3264 age:23 conn-time:852
2754 0xe800 ce53628a1e3f5b3c age:23 conn-time:180
2765 +-------------------------------------------------+------------------------------------------------…
2814 Get the NETWORK_ID_TIMEOUT parameter used in the Router role.
2824 Set the NETWORK_ID_TIMEOUT parameter used in the Router role.
2864 …oning credential becomes stale after changing this value. Use [pskc](#pskc--p-keypassphrase) to re…
2887 - timesyncperiod: The time synchronization period, in seconds.
2888 - xtalthreshold: The XTAL accuracy threshold for a device to become Router-Capable device, in PPM.
2897 Output the table of allocated Router IDs and the current next hop (as Router ID) and path cost for …
2902 +------+------+------+
2906 | 46 | - | - |
2947 Get the diagnostic information for a Thread Router as parent.
2949 …Router when `OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE` is enabled, this command will return the c…
2971 Get the assigned parent priority value, -2 means not assigned.
2981 Set the assigned parent priority value: 1, 0, -1 or -2.
3021 ### ping \[async\] \[-I source\] \[-m] \<ipaddr\> \[size\] \[count\] \[interval\] \[hoplimit\] \[ti…
3025 - async: Use the non-blocking mode. New commands are allowed before the ping process terminates.
3026 - source: The source IPv6 address of the echo request.
3027 - -m: multicast loop, which allows looping back pings to multicast addresses that the device itself…
3028 - size: The number of data bytes to be sent.
3029 - count: The number of ICMPv6 Echo Requests to be sent.
3030 - interval: The interval between two consecutive ICMPv6 Echo Requests in seconds. The value may hav…
3031 - hoplimit: The hoplimit of ICMPv6 Echo Request to be sent.
3032 - timeout: Time in seconds to wait for the final ICMPv6 Echo Reply after sending out the request. T…
3037 1 packets transmitted, 1 packets received. Packet loss = 0.0%. Round-trip min/avg/max = 0/0.0/0 ms.
3040 > ping -I fd00:db8:0:0:76b:6a05:3ae9:a61a ff02::1 100 1 1 1
3042 1 packets transmitted, 1 packets received. Round-trip min/avg/max = 7/7.0/7 ms.
3054 1 packets transmitted, 1 packets received. Packet loss = 0.0%. Round-trip min/avg/max = 0/0.0/0 ms.
3106 ### pskc [-p] \<key\>|\<passphrase\>
3108 With `-p` generate pskc from \<passphrase\> (UTF-8 encoded) together with **current** network name …
3113 > pskc -p 123456
3142 Prefer a Router ID when solicit router id from Leader.
3151 … 1.2 border router with backbone capability, the local Domain Prefix would be listed as well (with…
3156 - fd00:7d03:7d03:7d03::/64 prosD med
3166 - p: Preferred flag
3167 - a: Stateless IPv6 Address Autoconfiguration flag
3168 - d: DHCPv6 IPv6 Address Configuration flag
3169 - c: DHCPv6 Other Configuration flag
3170 - r: Default Route flag
3171 - o: On Mesh flag
3172 - s: Stable flag
3173 - n: Nd Dns flag
3174 - D: Domain Prefix flag
3175 - prf: Default router preference, which may be 'high', 'med', or 'low'.
3327 RCP-related commands.
3347 OPENTHREAD/20191113-00825-g82053cc9d-dirty; SIMULATION; Jun 4 2020 17:53:16
3353 Release a Router ID that has been allocated by the device in the Leader role.
3403 - s: Stable flag
3404 - n: NAT64 flag
3405 - a: Advertising PIO (AP) flag
3406 - prf: Default Router Preference, which may be: 'high', 'med', or 'low'.
3422 ### router list
3424 List allocated Router IDs.
3427 > router list
3432 ### router table
3437 > router table
3439 +----+--------+----------+-----------+-------+--------+-----+------------------+------+
3445 ### router \<id\>
3447 Print diagnostic information for a Thread Router. The `id` may be a Router ID or an RLOC16.
3450 > router 50
3452 Router ID: 50
3465 > router 0xc800
3467 Router ID: 50
3500 Indicates whether the router role is enabled or disabled.
3510 Enable the router role.
3519 Disable the router role.
3587 - channel: The channel to scan on. If no channel is provided, the active scan will cover all valid …
3592 +------+------------------+----+-----+-----+
3593 | ffff | f1d92a82c8d8fe43 | 11 | -20 | 0 |
3601 - duration: The time in milliseconds to spend scanning each channel.
3606 +----+------+
3607 | 11 | -59 |
3608 | 12 | -62 |
3609 | 13 | -67 |
3610 | 14 | -61 |
3611 | 15 | -87 |
3612 | 16 | -86 |
3613 | 17 | -86 |
3614 | 18 | -52 |
3615 | 19 | -58 |
3616 | 20 | -82 |
3617 | 21 | -76 |
3618 | 22 | -82 |
3619 | 23 | -74 |
3620 | 24 | -81 |
3621 | 25 | -88 |
3622 | 26 | -71 |
3629 +----+------+
3630 | 20 | -82 |
3642 - enterpriseNumber: IANA enterprise number
3643 - serviceData: hex-encoded binary service data
3644 - serverData: hex-encoded binary server data (empty if not provided)
3657 - enterpriseNumber: IANA enterprise number
3658 - serviceData: hext-encoded binary service data
3681 - NTP server IP: 2001:4860:4806:8:: (Google IPv6 NTP Server)
3682 - NTP server port: 123
3686 > SNTP response - Unix time: 1540894725 (era: 0)
3689 You can use NAT64 of OpenThread Border Router to reach e.g. Google IPv4 NTP Server:
3693 > SNTP response - Unix time: 1540898611 (era: 0)
3702 offline, disabled, detached, child, router or leader
3710 …g the API while the device is detached can make a production application non-compliant with the Th…
3714 …sing this API without such user action can make a production application non-compliant with the Th…
3722 Leader Router ID: 59
3741 Try to switch to state `detached`, `child`, `router`.
3754 … testing only. `OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE` is required for all `test` sub-commands.
3810 Print the tx queue time-in-queue histogram.
3814 The time-in-queue is tracked for direct transmissions only and is measured as the duration from whe…
3816 …ow shows min and max time-in-queue (in milliseconds) followed by number of messages with time-in-q…
3823 +------+------+---------+
3879 Print the maximum observed time-in-queue in milliseconds.
3883 The time-in-queue is tracked for direct transmissions only and is measured as the duration from whe…
3892 Reset the TX queue time-in-queue statistics.
3903 `OPENTHREAD_CONFIG_RADIO_LINK_TREL_ENABLE` is required for all `trel` sub-commands.
3966 +-----+------------------+------------------+--------------------------------------------------+
4009 Enable thread version check when upgrading to router or leader.
4022 Disable thread version check when upgrading to router or leader.
4039 -10 dBm
4048 > txpower -10
4172 The input string MUST consist of characters in `['0'-'9']`.
4186 The input string MUST consist of characters in `['0'-'9']`. The last digit is treated as checksum.
4265 Instruct an Rx-Off-When-Idle device to send a mac frame to its parent. The mac frame could be eithe…
4284 0f6127e33af6b403 : rss -95 (lqi 1)
4287 0f6127e33af6b403 : rss -95 (lqi 1)
4288 Default rss: -50 (lqi 3)
4299 0f6127e33af6b403 : rss -95 (lqi 1)
4336 > macfilter addr add 0f6127e33af6b403 -95
4369 0f6127e33af6b403 : rss -95 (lqi 1)
4370 Default rss: -50 (lqi 3)
4379 > macfilter rss add * -50
4384 > macfilter rss add 0f6127e33af6b404 -85
4388 ### macfilter rss add-lqi \<extaddr\> \<lqi\>
4393 > macfilter rss add-lqi * 3
4398 > macfilter rss add-lqi 0f6127e33af6b404 2
4433 Get the wake-up channel.
4445 Set the wake-up channel.
4456 Get the wake-up listen interval and duration.
4469 Set the wake-up listen interval and duration.
4480 Show the state of wake-up listening feature.
4492 Enable/disable listening for wake-up frames.
4501 ### wakeup wake \<extaddr\> \<wakeup-interval\> \<wakeup-duration\>
4503 Wakes a Wake-up End Device.