Lines Matching refs:in
5 You can find information about their limitations and approximations in
10 * Do not allow outputs drivers to be in a tristate mode (an output can be disconnected, but not
19 Inputs can be driven in 3 different ways:
32 Any toggle in any pin configured as an output will be dumped to that file, following the
42 if the pin is connected/driven in that direction.
50 unlike in real HW where they are connected to the same physical pins. Note that from the embedded
52 port "0" just like when configuring it in real HW).
65 * Time is a 64 bit unsigned value, representing time in microseconds since boot.
67 * Pin is the pin number in that port (for a nrf52833: 0..31 for port 0, and 0..9 for port 1)
83 Where pin 0 in port 0, is toggled at boot, 200microseconds, 600microseconds, 800microseconds, 1ms
100 And it must always be followed by 4 unsigned integers in 2 pairs.
102 the second value the pin in that port.
121 ### Comments in input files