Lines Matching full:type
123 Optional type-length-value records (TLVs) containing image metadata are placed
336 old image marks itself "OK" when it boots, the next boot will have swap type
343 The "swap type" is a high-level representation of the outcome of the
344 boot. Subsequent sections describe how mcuboot determines the swap type from
454 - Swap type: Stored in bits 0-3. Indicating the type of swap operation in
456 determine the type of operation to perform. This field contains one of the
491 At startup, the boot loader determines the boot swap type by inspecting the
580 `swap info` field from the active trailer and extracting the swap type from bits
658 + Mark the swap type as `None`.
668 + Set the previously determined swap type for the current image.
673 + Mark the swap type as `Fail`.
676 + Mark the swap type as `None`.
684 + Modify swap type depending on what the previous type was.
973 determines the type of swap operation that was interrupted by reading the `swap
974 info` field in the active image trailer and extracting the swap type from bits
1096 is not fulfilled then the swap type of that image has to be modified
1152 In the shared memory area all data entries are stored in a type-length-value
1163 `boot/bootutil/include/bootutil/boot_status.h` file. The type is followed by a
1187 * Software type (role of the software component)
1191 * Measurement type (algorithm used to calculate the measurement value)
1194 will be the value of the "Software type" attribute in the generated BOOT_RECORD