Lines Matching refs:used
18 This software may be distributed, used, and modified under the terms of
33 names of its contributors may be used to endorse or promote products
85 material, they cannot be used with WPA or IEEE 802.1X WEP keying)
100 - can be used in place of an external TLS/crypto library
131 used with IEEE 802.1X (i.e., not WPA) when using ap_scan=0 option in
159 These libraries are _not_ used in the default Linux build. Instead,
160 internal Linux specific implementation is used. libpcap/libdnet are
161 more portable and they can be used by adding CONFIG_L2_PACKET=pcap into
163 systems. In case of Windows builds, WinPcap is used by default
178 EAP-GTC, EAP-OTP, and EAP-MSCHAPV2 cannot be used alone with WPA, so
180 machines. However, there can be used as inner authentication
199 Wi-Fi Alliance (http://www.wi-fi.org/) used a draft version of the
233 the Authenticator and Supplicant. This handshake is also used to
268 Following steps are used when associating with an AP using WPA:
297 The build time configuration can be used to select only the needed
303 Following build time configuration options are used to control IEEE
307 TLSv1 implementation can be used for TLS functionality.
328 Following option can be used to include GSM SIM/USIM interface for GSM/UMTS
420 -C = ctrl_interface parameter (only used if -c is not)
518 for each used SSID. wpa_supplicant will automatically select the best
528 # allow frontend (e.g., wpa_cli) to be used by all users in 'wheel' group
612 configuration options are used based on what security policy is used in the
640 6) Authentication for wired Ethernet. This can be used with 'wired' or
662 certificate is used, a matching private key file has to also be
685 wpa_supplicant. It is used to query current status, change
694 used to implement, e.g., one-time-passwords or generic token card
728 request. 'password' and 'otp' commands can be used regardless of
732 with 'otp' are used only once and then forgotten, i.e., wpa_supplicant
733 will ask frontend for a new value for every use. This can be used to
804 wpa_cli can used to run external programs whenever wpa_supplicant
805 connects or disconnects from a network. This can be used, e.g., to
811 default interface (-i can be used to select the interface in case of
812 more than one interface being used at the same time):
824 Following example can be used as a simple template for an action
853 For example, following small changes to pcmcia-cs scripts can be used
883 network interfaces. When used in this way, a global (i.e., per
884 wpa_supplicant process) control interface is used to add and remove
970 It should be noted that the interface used between wpa_supplicant and
975 describing how wpa_supplicant can be used with reduced privileges
988 0 (root). Linux capabilities can be used to provide restricted set of
993 setcap(8) can be used to set file capabilities. For example:
1013 be used for the control interface.
1021 radio. The RADIO_WORK control interface command can be used for this.
1024 used to reserve a slot for radio access. If freq is specified, other
1035 the operation has been completed, "RADIO_WORK done <id>" is used to
1040 happened. "RADIO_WORK done <id>" can also be used to cancel items that