Lines Matching refs:on
5 wpa_supplicant can be configured and how an external component on the
58 wpa_cli starts in interactive mode if no command string is included on
62 by adding -i argument on the command line (e.g., 'wpa_cli -i wlan1').
64 Most of the P2P operations are done on the main interface (e.g., the
169 SSID/passphrase configuration based on a previously used persistent
201 based on SSID to avoid selecting an incorrect BSS entry in case the same
271 the GO to be started on a specific frequency. Special freq=2 or freq=5
303 per_sta_psk command below for more details on how the peer can be
502 each request based on pre-configured services), 1 = external
505 that there is quite strict limit on how quickly the response needs to
527 (note: see P2P spec Annex E.4 for information on how to construct the bitfield)
579 (These are used on the group interface.)
584 the AP/GO. This is used on the GO when a P2P client joins an existing
588 label or display on the P2P Client/WPS Enrollee.
593 Enrollee to connect to the AP/GO. This is used on the GO when a P2P
649 When specifying a social channel on the 2.4 GHz band (1/6/11) there is
651 specifying a social channel on the 60 GHz band (2), specify the 60 GHz
670 passphrase on the GO that is normally used to allow legacy stations to
677 operations. The format on these parameters is same as is used in
684 Set WPS UUID (by default, this is generated based on the MAC address).
764 (These are used on the group interface.)