Lines Matching refs:in
5 implementation in wpa_supplicant and hostapd can be configured and how
13 enrolling of interface-less devices in a secure Wi-Fi network using many
15 authentication (password with in-band provisioning), etc. In DPP a
27 The following parameters must be included in the config file used to
33 Enable DPP in wpa_supplicant build config file
40 Enable DPP in hostapd build config file
47 Any STA or AP device can act as a Configurator. Enable DPP in build
116 band channel 1 is 2412 MHz) in case the Enrollee is a client device. An
123 Enter the QR Code in the Configurator.
134 The DPP values will be printed in the console. Save these values into the
142 To set values in runtime for AP enrollees
148 To set values in runtime for client enrollees, set dpp_config_processing
149 to 2 in wpa_supplicant conf file.
151 Once the values are set in run-time (if not set in run-time, but saved
152 in config files, they are taken up in next restart), the client device
163 Create a Configurator in the device and use the dpp_configurator_sign