Lines Matching refs:on
33 - this is based on additional details being added in the IEEE 802.11
126 * fixed Hotspot 2.0 credential selection based on roaming consortium
140 completely based on REVmd changes
144 on both the station and the selected AP
148 - reject use of unsuitable groups based on new implementation guidance
295 - improve robustness on various exchanges
326 - fix follow-on PD Response behavior
402 * added support for PBSS/PCP and P2P on 60 GHz
471 * fixed BSS selection based on estimated throughput
484 * fixed number of small issues based on hwsim test case failures and
490 - fix regresssion in disallow_freq preventing search on social
495 - allow cross connection on parent interface (this fixes number of
510 PMF is not enabled on the AP
540 * enable AP/GO mode HT Tx STBC automatically based on driver support
541 * add ANQP-QUERY-DONE event to provide information on ANQP parsing
547 not available from driver; estimate maximum throughput based on common
564 maximum remain-on-channel time below 1000 ms (500 ms is the current
593 for hidden SSIDs (based on scan_ssid=1)
643 - enable enable U-APSD on GO automatically if the driver indicates
658 - do use freed memory on device found event when P2P NFC
679 * slow down automatic connection attempts on EAP failure to meet
725 - fix possible segmentation fault on EAP method deinit if an invalid
732 * fixed GSM authentication on USIM
753 - avoid undesired re-starting of GO negotiation based on Probe
783 without executing roaming/network re-selection on scan results
789 * disable network block temporarily on repeated connection failures
829 * modified behavior on externally triggered scans
846 - P2P group formation/join based on NFC connection handover
848 parameters on the GO) to replace DHCP
864 - avoid concurrent remain-on-channel operation requests by canceling
892 problems reading the file on next start
934 * maintain a list of P2P Clients for persistent group on GO
953 - credential configuration and automatic network selections based on
960 * removed ctrl_iface event on P2P PD Response in join-group case
961 * added option to fetch BSS table entry based on P2P Device Address
981 * added support for sending debug info to Linux tracing (-T on command
1001 - Keep-alive based on BSS max idle period
1019 40 MHz channels to be requested on the 5 GHz band
1042 * disable network block temporarily on authentication failures
1071 * optimized PSK generation on P2P GO by caching results to avoid
1099 * Allow AP mode to disconnect STAs based on low ACK condition (when
1109 - Add a DBus signal for EAP SM requests, emitted on the Interface
1125 - Raise PropertiesChanged on org.freedesktop.DBus.Properties.
1140 on receiving disconnection event.
1171 - Set RF bands based on driver capabilities, instead of hardcoding
1180 - Cancel WPS operation on PBC session overlap detection.
1184 - Trigger WPS config update on Manufacturer, Model Name, Model
1188 - Disable AP PIN after 10 consecutive failures. Slow down attacks on
1193 user on how to resolve the issue.
1200 - when an attack is detected on any interface, disable AP PIN on
1207 - Add wps_er_set_config to enroll a network based on a local
1210 - Allow AP filtering based on IP address, add ctrl_iface event for
1239 * bgscan learn: Add new bgscan that learns BSS information based on
1277 * BSSes to be included in the BSS table can be filtered based on
1284 selection to filter out entries based on the operating channel
1286 dynamic changes to background scanning interval based on changes in
1331 * allow multiple driver wrappers to be specified on command line
1363 wireless device or IEEE 802.1X on wired is needed)
1423 OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is
1486 * fixed problems in getting NDIS events from WMI on Windows 2000
1490 functionality (CONFIG_DEBUG_FILE=y and -f<path> on command line)
1593 * fixed EAP-TTLS implementation not to crash on use of freed memory
1606 (total size of this internal TLS/crypto code is bit under 50 kB on
1624 be used with cards that do not support file selection based on
1647 return -1 on error (e.g., connection lost); control interface clients
1705 library, e.g., to reduce total size requirement on systems that do
1715 was used (id_str in wpa_supplicant.conf; included on
1736 * driver_ndis: added support for selecting AP based on BSSID
1752 * driver_madwifi: fixed TKIP and CCMP sequence number configuration on
1782 on how to use this)
1794 interface (-bbr0 on command line)
1889 easily on cross-compilation builds
1954 * driver_ndis: fixed driver polling not to increase frequency on each
1957 * fixed driver_wext.c to filter wireless events based on ifindex to
1978 to use wpa_supplicant on link layers that use different header than
2005 (see wpa_supplicant.conf for more information on how to configure
2034 wpa_supplicant configuration (double click on the scan results to
2042 * fixed build with CONFIG_DNET_PCAP=y on Linux
2124 * added support for wired authentication (IEEE 802.1X on wired
2148 allows external commands (e.g., shell scripts) to be run based on
2209 WPA-NONE, i.e., TKIP or CCMP with a fixed key (based on psk) and no
2211 example on how to configure this (note: this is currently implemented
2222 small problems with error case processing not terminating on
2247 based on driver/OS specific mapping, e.g., in case of driver_ndis,
2257 machines ending up in AUTHENTICATED/SUCCESS state based on old
2306 * PEAPv1: added support for terminating PEAP authentication on tunneled
2308 peap_outer_success=0 on phase1 parameters in wpa_supplicant.conf
2341 connection on some platforms (e.g., ARM)
2374 wpa_supplicant process; each interface needs to be listed on the
2445 this allows networks to be grouped based on priority (the scan